Jump to content
openSUSE Leap 15.5

Reference

Publication Date: August 02, 2023
About this guide
Available documentation
Improving the documentation
Documentation conventions
Source code
Acknowledgments
I Advanced administration
1 YaST in text mode
1.1 Navigation in modules
1.2 Advanced key combinations
1.3 Restriction of key combinations
1.4 YaST command line options
2 Managing software with command line tools
2.1 Using Zypper
2.2 RPM—the package manager
3 System recovery and snapshot management with Snapper
3.1 Default setup
3.2 Using Snapper to undo changes
3.3 System rollback by booting from snapshots
3.4 Enabling Snapper in user home directories
3.5 Creating and modifying Snapper configurations
3.6 Manually creating and managing snapshots
3.7 Automatic snapshot clean-up
3.8 Showing exclusive disk space used by snapshots
3.9 Frequently asked questions
4 Remote graphical sessions with VNC
4.1 The vncviewer client
4.2 Remmina: the remote desktop client
4.3 Configuring one-time sessions on the VNC server
4.4 Configuring persistent VNC server sessions
4.5 Configuring encryption on the VNC server
4.6 Compatibility with Wayland
5 Expert Partitioner
5.1 Using the Expert Partitioner
5.2 LVM configuration
5.3 Soft RAID
6 Installing multiple kernel versions
6.1 Enabling and configuring multiversion support
6.2 Installing/removing multiple kernel versions with YaST
6.3 Installing/removing multiple kernel versions with Zypper
6.4 Installing the latest kernel version from the repository Kernel:HEAD
7 Graphical user interface
7.1 X Window System
7.2 Installing and configuring fonts
7.3 GNOME configuration for administrators
7.4 Switching between Intel and NVIDIA Optimus GPUs with SUSE Prime
II System
8 32-bit and 64-bit applications in a 64-bit system environment
8.1 Runtime support
8.2 Kernel specifications
9 Introduction to the boot process
9.1 Terminology
9.2 The Linux boot process
10 The systemd daemon
10.1 The systemd concept
10.2 Basic usage
10.3 System start and target management
10.4 Managing services with YaST
10.5 Customizing systemd
10.6 Advanced usage
10.7 systemd timer units
10.8 More information
11 journalctl: query the systemd journal
11.1 Making the journal persistent
11.2 journalctl: useful switches
11.3 Filtering the journal output
11.4 Investigating systemd errors
11.5 Journald configuration
11.6 Using YaST to filter the systemd journal
11.7 Viewing logs in GNOME
12 The boot loader GRUB 2
12.1 Main differences between GRUB legacy and GRUB 2
12.2 Configuration file structure
12.3 Configuring the boot loader with YaST
12.4 Helpful GRUB 2 commands
12.5 More information
13 Basic networking
13.1 IP addresses and routing
13.2 IPv6—the next generation Internet
13.3 Name resolution
13.4 Configuring a network connection with YaST
13.5 NetworkManager
13.6 Configuring a network connection manually
13.7 Basic router setup
13.8 Setting up bonding devices
13.9 Setting up team devices for Network Teaming
13.10 Software-defined networking with Open vSwitch
14 UEFI (Unified Extensible Firmware Interface)
14.1 Secure boot
14.2 More information
15 Special system features
15.1 Information about special software packages
15.2 Virtual consoles
15.3 Keyboard mapping
15.4 Language and country-specific settings
16 Dynamic kernel device management with udev
16.1 The /dev directory
16.2 Kernel uevents and udev
16.3 Drivers, kernel modules and devices
16.4 Booting and initial device setup
16.5 Monitoring the running udev daemon
16.6 Influencing kernel device event handling with udev rules
16.7 Persistent device naming
16.8 Files used by udev
16.9 More information
III Services
17 SLP
17.1 The SLP front-end slptool
17.2 Providing services via SLP
17.3 More information
18 Time synchronization with NTP
18.1 Configuring an NTP client with YaST
18.2 Manually configuring NTP in the network
18.3 Configure chronyd at runtime using chronyc
18.4 Dynamic time synchronization at runtime
18.5 Setting up a local reference clock
19 The domain name system
19.1 DNS terminology
19.2 Installation
19.3 Configuration with YaST
19.4 Starting the BIND name server
19.5 The /etc/named.conf configuration file
19.6 Zone files
19.7 Dynamic update of zone data
19.8 Secure transactions
19.9 DNS security
19.10 More information
20 DHCP
20.1 Configuring a DHCP server with YaST
20.2 DHCP software packages
20.3 The DHCP server dhcpd
20.4 More information
21 Samba
21.1 Terminology
21.2 Installing a Samba server
21.3 Starting and stopping Samba
21.4 Configuring a Samba server
21.5 Configuring clients
21.6 Samba as login server
21.7 Samba server in the network with Active Directory
21.8 Advanced topics
21.9 More information
22 Sharing file systems with NFS
22.1 Overview
22.2 Installing NFS server
22.3 Configuring NFS server
22.4 Configuring clients
22.5 Managing Access Control Lists over NFSv4
22.6 More information
22.7 Gathering information for NFS troubleshooting
23 On-demand mounting with autofs
23.1 Installation
23.2 Configuration
23.3 Operation and debugging
23.4 Auto-mounting an NFS share
23.5 Advanced topics
24 The Apache HTTP server
24.1 Quick start
24.2 Configuring Apache
24.3 Starting and stopping Apache
24.4 Installing, activating and configuring modules
24.5 Enabling CGI scripts
24.6 Setting up a secure Web server with SSL
24.7 Running multiple Apache instances on the same server
24.8 Avoiding security problems
24.9 Troubleshooting
24.10 More information
25 Setting up an FTP server with YaST
25.1 Starting the FTP server
25.2 FTP general settings
25.3 FTP performance settings
25.4 Authentication
25.5 Expert settings
25.6 More information
26 Squid caching proxy server
26.1 Some facts about proxy servers
26.2 System requirements
26.3 Basic usage of Squid
26.4 The YaST Squid module
26.5 The Squid configuration file
26.6 Configuring a transparent proxy
26.7 Using the Squid cache manager CGI interface (cachemgr.cgi)
26.8 Cache report generation with Calamaris
26.9 More Information
IV Mobile computers
27 Mobile computing with Linux
27.1 Laptops
27.2 Mobile hardware
27.3 Mobile devices (smartphones and tablets)
28 Using NetworkManager
28.1 Use cases for NetworkManager
28.2 Enabling or disabling NetworkManager
28.3 Configuring network connections
28.4 NetworkManager and security
28.5 Frequently asked questions
28.6 Troubleshooting
28.7 More information
29 Power management
29.1 Power saving functions
29.2 Advanced configuration and power interface (ACPI)
29.3 Rest for the hard disk
29.4 Troubleshooting
A An example network
B GNU licenses
B.1 GNU Free Documentation License
List of Figures
1.1 Main window of YaST in text mode
1.2 The software installation module
3.1 Boot loader: snapshots
4.1 vncviewer
4.2 Remmina's main window
4.3 Remote desktop preference
4.4 Quick-starting
4.5 Remmina viewing remote session
4.6 Reading path to the profile file
4.7 Remote administration
4.8 VNC session settings
4.9 Joining a persistent VNC session
5.1 The YaST partitioner
5.2 Btrfs subvolumes in YaST partitioner
5.3 Creating a volume group
5.4 Logical volume management
5.5 RAID partitions
6.1 The YaST software manager: multiversion view
10.1 Services Manager
11.1 YaST systemd journal
12.1 GRUB 2 boot editor
12.2 Boot code options
12.3 Boot loader options
12.4 Kernel parameters
13.1 Simplified layer model for TCP/IP
13.2 TCP/IP Ethernet packet
13.3 Configuring network settings
13.4 wicked architecture
14.1 Secure boot support
14.2 UEFI: secure boot process
18.1 NTP configuration window
18.2 Adding a time server
19.1 DNS server installation: forwarder settings
19.2 DNS server installation: DNS zones
19.3 DNS server installation: finish wizard
19.4 DNS server: logging
19.5 DNS server: Zone Editor (Basics)
19.6 DNS server: Zone Editor (NS Records)
19.7 DNS server: Zone Editor (MX Records)
19.8 DNS server: Zone Editor (SOA)
19.9 Adding a record for a primary zone
19.10 Adding a reverse zone
19.11 Adding a reverse record
20.1 DHCP server: card selection
20.2 DHCP server: global settings
20.3 DHCP server: dynamic DHCP
20.4 DHCP server: start-up
20.5 DHCP server: host management
20.6 DHCP server: chroot jail and declarations
20.7 DHCP server: selecting a declaration type
20.8 DHCP server: configuring subnets
20.9 DHCP server: TSIG configuration
20.10 DHCP server: interface configuration for dynamic DNS
20.11 DHCP server: network interface and firewall
21.1 Determining Windows domain membership
21.2 Windows Explorer Advanced Attributes dialog
21.3 Windows Explorer directory listing with compressed files
21.4 Adding a new Samba share with snapshots enabled
21.5 The Previous versions tab in Windows explorer
22.1 NFS server configuration tool
24.1 HTTP server wizard: default host
24.2 HTTP server wizard: summary
24.3 HTTP server configuration: listen ports and addresses
24.4 HTTP server configuration: server modules
25.1 FTP server configuration — start-up
27.1 Integrating a mobile computer in an existing environment
28.1 GNOME Network Connections dialog
List of Examples
2.1 Zypper—list of known repositories
2.2 rpm -q -i wget
2.3 Script to search for packages
3.1 Example timeline configuration
7.1 Specifying rendering algorithms
7.2 Aliases and family name substitutions
7.3 Aliases and family name substitutions
7.4 Aliases and family names substitutions
10.1 List active services
10.2 List failed services
10.3 List all processes belonging to a service
12.1 Usage of grub2-mkconfig
12.2 Usage of grub2-mkrescue
12.3 Usage of grub2-script-check
12.4 Usage of grub2-once
13.1 Writing IP addresses
13.2 Linking IP addresses to the netmask
13.3 Sample IPv6 address
13.4 IPv6 address specifying the prefix length
13.5 Common network interfaces and some static routes
13.6 /var/run/netconfig/resolv.conf
13.7 /etc/hosts
13.8 /etc/networks
13.9 /etc/host.conf
13.10 /etc/nsswitch.conf
13.11 Output of the command ping
13.12 Configuration for load balancing with Network Teaming
13.13 Configuration for DHCP Network Teaming device
15.1 Entry in /etc/crontab
15.2 /etc/crontab: remove time stamp files
15.3 ulimit: Settings in ~/.bashrc
16.1 Example udev rules
19.1 Forwarding options in named.conf
19.2 A basic /etc/named.conf
19.3 Entry to disable logging
19.4 Zone entry for example.com
19.5 Zone entry for example.net
19.6 The /var/lib/named/example.com.zone file
19.7 Reverse lookup
20.1 The configuration file /etc/dhcpd.conf
20.2 Additions to the configuration file
21.1 A CD-ROM share
21.2 [homes] share
21.3 Global section in smb.conf
21.4 Using rpcclient to request a Windows server 2012 share snapshot
24.1 Basic examples of name-based VirtualHost entries
24.2 Name-based VirtualHost directives
24.3 IP-based VirtualHost directives
24.4 Basic VirtualHost configuration
24.5 VirtualHost CGI configuration
26.1 A request with squidclient
26.2 Defining ACL rules

Copyright © 2006– 2023 SUSE LLC and contributors. All rights reserved.

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or (at your option) version 1.3; with the Invariant Section being this copyright notice and license. A copy of the license version 1.2 is included in the section entitled GNU Free Documentation License.

For SUSE trademarks, see https://www.suse.com/company/legal/. All other third-party trademarks are the property of their respective owners. Trademark symbols (®, ™ etc.) denote trademarks of SUSE and its affiliates. Asterisks (*) denote third-party trademarks.

All information found in this book has been compiled with utmost attention to detail. However, this does not guarantee complete accuracy. Neither SUSE LLC, its affiliates, the authors nor the translators shall be held liable for possible errors or the consequences thereof.

About this guide Edit source

This manual gives you a general understanding of openSUSE® Leap. It is intended mainly for system administrators and home users with basic system administration knowledge. Check out the various parts of this manual for a selection of applications needed in everyday life and in-depth descriptions of advanced installation and configuration scenarios.

Advanced administration

Learn about advanced adminstrations tasks such as using YaST in text mode and managing software from the command line. Find out how to do system rollbacks with Snapper and how to use advanced storage techniques on openSUSE Leap.

System

Get an introduction to the components of your Linux system and a deeper understanding of their interaction.

Services

Learn how to configure the various network and file services that come with openSUSE Leap.

Mobile computers

Get an introduction to mobile computing with openSUSE Leap, get to know the various options for wireless computing and power management.

1 Available documentation Edit source

Online documentation

Our documentation is available online at https://doc.opensuse.org. Browse or download the documentation in various formats.

Note
Note: Latest updates

The latest updates are usually available in the English-language version of this documentation.

In your system

For offline use, the release notes are also available under /usr/share/doc/release-notes on your system. The documentation for individual packages is available at /usr/share/doc/packages.

Many commands are also described in their manual pages. To view them, run man, followed by a specific command name. If the man command is not installed on your system, install it with sudo zypper install man.

2 Improving the documentation Edit source

Your feedback and contributions to this documentation are welcome. The following channels for giving feedback are available:

Bug reports

Report issues with the documentation at https://bugzilla.opensuse.org/.

To simplify this process, click the Report an issue icon next to a headline in the HTML version of this document. This preselects the right product and category in Bugzilla and adds a link to the current section. You can start typing your bug report right away.

A Bugzilla account is required.

Contributions

To contribute to this documentation, click the Edit source document icon next to a headline in the HTML version of this document. This will take you to the source code on GitHub, where you can open a pull request.

A GitHub account is required.

Note
Note: Edit source document only available for English

The Edit source document icons are only available for the English version of each document. For all other languages, use the Report an issue icons instead.

For more information about the documentation environment used for this documentation, see the repository's README at https://github.com/SUSE/doc-sle.

Mail

You can also report errors and send feedback concerning the documentation to <>. Include the document title, the product version, and the publication date of the document. Additionally, include the relevant section number and title (or provide the URL) and provide a concise description of the problem.

Help

If you need further help on openSUSE Leap, see https://en.opensuse.org/Portal:Support.

3 Documentation conventions Edit source

The following notices and typographic conventions are used in this document:

  • /etc/passwd: Directory names and file names

  • PLACEHOLDER: Replace PLACEHOLDER with the actual value

  • PATH: An environment variable

  • ls, --help: Commands, options, and parameters

  • user: The name of a user or group

  • package_name: The name of a software package

  • Alt, AltF1: A key to press or a key combination. Keys are shown in uppercase as on a keyboard.

  • File, File › Save As: menu items, buttons

  • Chapter 1, Example chapter: A cross-reference to another chapter in this guide.

  • Commands that must be run with root privileges. Often you can also prefix these commands with the sudo command to run them as non-privileged user.

    # command
    > sudo command
  • Commands that can be run by non-privileged users.

    > command
  • Notices

    Warning
    Warning: Warning notice

    Vital information you must be aware of before proceeding. Warns you about security issues, potential loss of data, damage to hardware, or physical hazards.

    Important
    Important: Important notice

    Important information you should be aware of before proceeding.

    Note
    Note: Note notice

    Additional information, for example about differences in software versions.

    Tip
    Tip: Tip notice

    Helpful information, like a guideline or a piece of practical advice.

  • Compact Notices

    Note

    Additional information, for example about differences in software versions.

    Tip

    Helpful information, like a guideline or a piece of practical advice.

4 Source code Edit source

The source code of openSUSE Leap is publicly available. Refer to https://en.opensuse.org/Source_code for download links and more information.

5 Acknowledgments Edit source

With a lot of voluntary commitment, the developers of Linux cooperate on a global scale to promote the development of Linux. We thank them for their efforts—this distribution would not exist without them. Special thanks, of course, goes to Linus Torvalds.

Part I Advanced administration Edit source

1 YaST in text mode

The ncurses-based pseudo-graphical YaST interface is designed primarily to help system administrators to manage systems without an X server. The interface offers several advantages compared to the conventional GUI. You can navigate the ncurses interface using the keyboard, and there are keyboard sho…

2 Managing software with command line tools

This chapter describes Zypper and RPM, two command line tools for managing software. For a definition of the terminology used in this context (for example, repository, patch, or update) refer to Book “Start-Up”, Chapter 9 “Installing or removing software”, Section 9.1 “Definition of terms”.

3 System recovery and snapshot management with Snapper

Snapper allows creating and managing file system snapshots. File system snapshots allow keeping a copy of the state of a file system at a certain point of time. The standard setup of Snapper is designed to allow rolling back system changes. However, you can also use it to create on-disk backups of user data. As the basis for this functionality, Snapper uses the Btrfs file system or thinly-provisioned LVM volumes with an XFS or Ext4 file system.

4 Remote graphical sessions with VNC

Virtual Network Computing (VNC) enables you to access a remote computer via a graphical desktop, and run remote graphical applications. VNC is platform-independent and accesses the remote machine from any operating system. This chapter describes how to connect to a VNC server with the desktop clients vncviewer and Remmina, and how to operate a VNC server.

openSUSE Leap supports two different kinds of VNC sessions: one-time sessions that live While the VNC connection from the client is kept up, and persistent sessions that live until they are explicitly terminated.

A VNC server can offer both kinds of sessions simultaneously on different ports, but an open session cannot be converted from one type to the other.

5 Expert Partitioner

Sophisticated system configurations require specific disk setups. You can perform all common partitioning tasks during the installation.

6 Installing multiple kernel versions

openSUSE Leap supports the parallel installation of multiple kernel versions. When installing a second kernel, a boot entry and an initrd are automatically created, so no further manual configuration is needed. When rebooting the machine, the newly added kernel is available as an additional boot parameter.

Using this functionality, you can safely test kernel updates while being able to always fall back to the proven former kernel. To do this, do not use the update tools (such as the YaST Online Update or the updater applet), but instead follow the process described in this chapter.

7 Graphical user interface

openSUSE Leap includes the X.org server, Wayland and the GNOME desktop. This chapter describes the configuration of the graphical user interface for all users.

1 YaST in text mode Edit source

The ncurses-based pseudo-graphical YaST interface is designed primarily to help system administrators to manage systems without an X server. The interface offers several advantages compared to the conventional GUI. You can navigate the ncurses interface using the keyboard, and there are keyboard shortcuts for practically all interface elements. The ncurses interface is light on resources, and runs fast even on modest hardware. You can run the ncurses-based version of YaST via an SSH connection, so you can administer remote systems. Keep in mind that the minimum supported size of the terminal emulator in which to run YaST is 80x25 characters.

Main window of YaST in text mode
Figure 1.1: Main window of YaST in text mode

To launch the ncurses-based version of YaST, open the terminal and run the sudo yast2 command. Use the →| or arrow keys to navigate between interface elements like menu items, fields and buttons. All menu items and buttons in YaST can be accessed using the appropriate function keys or keyboard shortcuts. For example, you can cancel the current operation by pressing F9, while the F10 key can be used to accept the changes. Each menu item and button in YaST's ncurses-based interface has a highlighted letter in its label. This letter is part of the keyboard shortcut assigned to the interface element. For example, the letter Q is highlighted in the Quit button. This means that you can activate the button by pressing AltAlt+Q.

Tip
Tip: Refreshing YaST dialogs

If a YaST dialog gets corrupted or distorted (for example, while resizing the window), press CtrlL to refresh and restore its contents.

1.1 Navigation in modules Edit source

The following description of the control elements in the YaST modules assumes that all function keys and Alt key combinations work and are not assigned to different global functions. Read Section 1.3, “Restriction of key combinations” for information about possible exceptions.

Moving between buttons and selection lists

Use →| to move between the buttons and frames containing selection lists. To navigate in the opposite direction, use Alt→| or Shift→| combinations.

Navigating in selection lists

Use the arrow keys ( and ) to move through the individual elements in an active frame containing a selection list. If individual entries are longer than the frame's width, use Shift or Shift to scroll horizontally. If the arrow key causes the selection to move to another frame, use CtrlE or CtrlA instead.

Working with buttons, radio buttons, and check boxes

To select items with empty square brackets (check boxes) or empty parentheses (radio buttons), press Space or Enter. Alternatively, radio buttons and check boxes can be selected directly with Althighlighted_letter. In this case, you do not need to confirm with Enter. If you navigate to an item with →|, press Enter to execute the selected action or activate the respective menu item.

Function keys

The function keys (from F1 to F12) enable quick access to the specific buttons. Available function key combinations (FX) are shown in the bottom line of the YaST screen. Which function keys are really mapped to which buttons depend on the active YaST module, because the different modules offer different buttons (Details, Info, Add, Delete, etc.). Use F10 for Accept, OK, Next, and Finish. Press F1 to access the YaST help.

Using the navigation tree

Some YaST modules use a navigation tree in the left part of the window to select configuration dialogs. Use the arrow keys ( and ) to navigate in the tree. Use Space to open or close tree items. In the ncurses mode, Enter must be pressed after a selection in the navigation tree to show the selected dialog. This is an intentional behavior to save time-consuming redraws when browsing through the navigation tree.

Selecting software in the software installation module

Use the filters on the left side to list packages matching the specified string. Installed packages are marked with the letter i. To change the status of a package, press Space or Enter. Alternatively, use the Actions menu to select the needed status change (install, delete, update, taboo or lock).

The software installation module
Figure 1.2: The software installation module

1.2 Advanced key combinations Edit source

The ncurses-based version of YaST offers several advanced key combinations.

ShiftF1

List advanced hotkeys.

ShiftF4

Change color schema.

Ctrl

Quit the application.

CtrlL

Refresh screen.

CtrlDF1

List advanced hotkeys.

CtrlDShiftD

Dump dialog to the log file as a screenshot.

CtrlDShiftY

Open YDialogSpy to see the widget hierarchy.

1.3 Restriction of key combinations Edit source

If your window manager uses global Alt combinations, the Alt combinations in YaST may not work. Keys like Alt or Shift can also be occupied by the settings of the terminal.

Using Alt instead of Esc

Alt shortcuts can be executed with Esc instead of Alt. For example, EscH replaces AltH. (Press Esc, then press H.)

Backward and forward navigation with CtrlF and CtrlB

If the Alt and Shift combinations are taken over by the window manager or the terminal, use the combinations CtrlF (forward) and CtrlB (backward) instead.

Restriction of function keys

The function keys (F1 ... F12) are also used for functions. Certain function keys may be taken over by the terminal and may not be available for YaST. However, the Alt key combinations and function keys should always be fully available on a text-only console.

1.4 YaST command line options Edit source

Besides the text mode interface, YaST provides a command line interface. To get a list of YaST command line options, use the following command:

> sudo yast -h

1.4.1 Installing packages from the command line Edit source

If you know the package name, and the package is provided by an active installation repository, you can use the command line option -i to install the package:

> sudo yast -i package_name

or

> sudo yast --install -i package_name

package_name can be a single short package name (for example gvim) installed with dependency checking, or the full path to an RPM package, which is installed without dependency checking.

While YaST offers basic functionality for managing software from the command line, consider using Zypper for more advanced package management tasks. Find more information on using Zypper in Section 2.1, “Using Zypper”.

1.4.2 Working with individual modules Edit source

To save time, you can start individual YaST modules using the following command:

> sudo yast module_name

View a list of all modules available on your system with yast -l or yast --list.

1.4.3 Command line parameters of YaST modules Edit source

To use YaST functionality in scripts, YaST provides command line support for individual modules. However, not all modules have command line support. To display the available options of a module, use the following command:

> sudo yast module_name help

If a module does not provide command line support, it is started in a text mode with the following message:

This YaST module does not support the command line interface.

The following sections describe all YaST modules with command line support, along with a brief explanation of all their commands and available options.

1.4.3.1 Common YaST module commands Edit source

All YaST modules support the following commands:

help

Lists all the module's supported commands with their description:

> sudo yast lan help
longhelp

Same as help, but adds a detailed list of all command's options and their descriptions:

> sudo yast lan longhelp
xmlhelp

Same as longhelp, but the output is structured as an XML document and redirected to a file:

> sudo yast lan xmlhelp xmlfile=/tmp/yast_lan.xml
interactive

Enters the interactive mode. This lets you run the module's commands without prefixing them with sudo yast. Use exit to leave the interactive mode.

1.4.3.2 yast add-on Edit source

Adds a new add-on product from the specified path:

 > sudo yast add-on http://server.name/directory/Lang-AddOn-CD1/

You can use the following protocols to specify the source path: http:// ftp:// nfs:// disk:// cd:// or dvd://.

1.4.3.3 yast audit-laf Edit source

Displays and configures the Linux Audit Framework. Refer to the Book “Security and Hardening Guide for more details. yast audit-laf accepts the following commands:

set

Sets an option:

> sudo yast audit-laf set log_file=/tmp/audit.log

For a complete list of options, run yast audit-laf set help.

show

Displays settings of an option:

> sudo yast audit-laf show diskspace
space_left: 75
space_left_action: SYSLOG
admin_space_left: 50
admin_space_left_action: SUSPEND
action_mail_acct: root
disk_full_action: SUSPEND
disk_error_action: SUSPEND

For a complete list of options, run yast audit-laf show help.

1.4.3.4 yast dhcp-server Edit source

Manages the DHCP server and configures its settings. yast dhcp-server accepts the following commands:

disable

Disables the DHCP server service.

enable

Enables the DHCP server service.

host

Configures settings for individual hosts.

interface

Specifies to which network interface to listen to:

> sudo yast dhcp-server interface current
Selected Interfaces: eth0
Other Interfaces: bond0, pbu, eth1

For a complete list of options, run yast dhcp-server interface help.

options

Manages global DHCP options. For a complete list of options, run yast dhcp-server options help.

status

Prints the status of the DHCP service.

subnet

Manages the DHCP subnet options. For a complete list of options, run yast dhcp-server subnet help.

1.4.3.5 yast dns-server Edit source

Manages the DNS server configuration. yast dns-server accepts the following commands:

acls

Displays access control list settings:

 > sudo yast dns-server acls show
 ACLs:
 -----
  Name       Type        Value
  ----------------------------
  any        Predefined
  localips   Predefined
  localnets  Predefined
  none       Predefined
dnsrecord

Configures zone resource records:

> sudo yast dnsrecord add zone=example.org query=office.example.org type=NS value=ns3

For a complete list of options, run yast dns-server dnsrecord help.

forwarders

Configures DNS forwarders:

> sudo yast dns-server forwarders add ip=10.0.0.100
> sudo yast dns-server forwarders show
[...]
Forwarder IP
------------
10.0.0.100

For a complete list of options, run yast dns-server forwarders help.

host

Handles 'A' and its related 'PTR' record at once:

> sudo yast dns-server host show zone=example.org

For a complete list of options, run yast dns-server host help.

logging

Configures logging settings:

> sudo yast dns-server logging set updates=no transfers=yes

For a complete list of options, run yast dns-server logging help.

mailserver

Configures zone mail servers:

> sudo yast dns-server mailserver add zone=example.org mx=mx1 priority=100

For a complete list of options, run yast dns-server mailserver help.

nameserver

Configures zone name servers:

> sudo yast dns-server nameserver add zone=example.com ns=ns1

For a complete list of options, run yast dns-server nameserver help.

soa

Configures the start of authority (SOA) record:

> sudo yast dns-server soa set zone=example.org serial=2006081623 ttl=2D3H20S

For a complete list of options, run yast dns-server soa help.

startup

Manages the DNS server service:

> sudo yast dns-server startup atboot

For a complete list of options, run yast dns-server startup help.

transport

Configures zone transport rules. For a complete list of options, run yast dns-server transport help.

zones

Manages DNS zones:

> sudo yast dns-server zones add name=example.org zonetype=master

For a complete list of options, run yast dns-server zones help.

1.4.3.6 yast disk Edit source

Prints information about all disks or partitions. The only supported command is list followed by either of the following options:

disks

Lists all configured disks in the system:

> sudo yast disk list disks
Device   | Size       | FS Type | Mount Point | Label | Model
---------+------------+---------+-------------+-------+-------------
/dev/sda | 119.24 GiB |         |             |       | SSD 840
/dev/sdb |  60.84 GiB |         |             |       | WD1003FBYX-0
partitions

Lists all partitions in the system:

> sudo yast disk list partitions
Device         | Size       | FS Type | Mount Point | Label | Model
---------------+------------+---------+-------------+-------+------
/dev/sda1      |   1.00 GiB | Ext2    | /boot       |       |
/dev/sdb1      |   1.00 GiB | Swap    | swap        |       |
/dev/sdc1      | 698.64 GiB | XFS     | /mnt/extra  |       |
/dev/vg00/home | 580.50 GiB | Ext3    | /home       |       |
/dev/vg00/root | 100.00 GiB | Ext3    | /           |       |
[...]

1.4.3.7 yast ftp-server Edit source

Configures FTP server settings. yast ftp-server accepts the following options:

SSL, TLS

Controls secure connections via SSL and TLS. SSL options are valid for the vsftpd only.

> sudo yast ftp-server SSL enable
> sudo yast ftp-server TLS disable
access

Configures access permissions:

> sudo yast ftp-server access authen_only

For a complete list of options, run yast ftp-server access help.

anon_access

Configures access permissions for anonymous users:

> sudo yast ftp-server anon_access can_upload

For a complete list of options, run yast ftp-server anon_access help.

anon_dir

Specifies the directory for anonymous users. The directory must already exist on the server:

> sudo yast ftp-server anon_dir set_anon_dir=/srv/ftp

For a complete list of options, run yast ftp-server anon_dir help.

chroot

Controls change root environment (chroot):

> sudo yast ftp-server chroot enable
> sudo yast ftp-server chroot disable
idle-time

Sets the maximum idle time in minutes before FTP server terminates the current connection:

> sudo yast ftp-server idle-time set_idle_time=15
logging

Determines whether to save the log messages into a log file:

> sudo yast ftp-server logging enable
> sudo yast ftp-server logging disable
max_clients

Specifies the maximum number of concurrently connected clients:

> sudo yast ftp-server max_clients set_max_clients=1500
max_clients_ip

Specifies the maximum number of concurrently connected clients via IP:

> sudo yast ftp-server max_clients_ip set_max_clients=20
max_rate_anon

Specifies the maximum data transfer rate permitted for anonymous clients (KB/s):

> sudo yast ftp-server max_rate_anon set_max_rate=10000
max_rate_authen

Specifies the maximum data transfer rate permitted for locally authenticated users (KB/s):

> sudo yast ftp-server max_rate_authen set_max_rate=10000
port_range

Specifies the port range for passive connection replies:

> sudo yast ftp-server port_range set_min_port=20000 set_max_port=30000

For a complete list of options, run yast ftp-server port_range help.

show

Displays FTP server settings.

startup

Controls the FTP start-up method:

> sudo yast ftp-server startup atboot

For a complete list of options, run yast ftp-server startup help.

umask

Specifies the file umask for authenticated:anonymous users:

> sudo yast ftp-server umask set_umask=177:077
welcome_message

Specifies the text to display when someone connects to the FTP server:

> sudo yast ftp-server welcome_message set_message="hello everybody"

1.4.3.8 yast http-server Edit source

Configures the HTTP server (Apache2). yast http-server accepts the following commands:

configure

Configures the HTTP server host settings:

> sudo yast http-server configure host=main servername=www.example.com \
 serveradmin=admin@example.com

For a complete list of options, run yast http-server configure help.

hosts

Configures virtual hosts:

> sudo yast http-server hosts create servername=www.example.com \
 serveradmin=admin@example.com documentroot=/var/www

For a complete list of options, run yast http-server hosts help.

listen

Specifies the ports and network addresses where the HTTP server should listen:

> sudo yast http-server listen add=81
> sudo yast http-server listen list
Listen Statements:
==================
:80
:81
> sudo yast http-server delete=80

For a complete list of options, run yast http-server listen help.

mode

Enables or disables the wizard mode:

> sudo yast http-server mode wizard=on
modules

Controls the Apache2 server modules:

> sudo yast http-server modules enable=php5,rewrite
> sudo yast http-server modules disable=ssl
> sudo http-server modules list
[...]
Enabled rewrite
Disabled ssl
Enabled php5
[...]

1.4.3.9 yast kdump Edit source

Configures kdump settings. For more information on kdump, refer to the Book “System Analysis and Tuning Guide”, Chapter 17 “Kexec and Kdump”, Section 17.7 “Basic Kdump configuration”. yast kdump accepts the following commands:

copykernel

Copies the kernel into the dump directory.

customkernel

Specifies the kernel_string part of the name of the custom kernel. The naming scheme is /boot/vmlinu[zx]-kernel_string[.gz].

> sudo yast kdump customkernel kernel=kdump

For a complete list of options, run yast kdump customkernel help.

dumpformat

Specifies the (compression) format of the dump kernel image. Available formats are none, ELF, compressed or lzo:

> sudo yast kdump dumpformat dump_format=ELF
dumplevel

Specifies the dump level number in the range from 0 to 31:

> sudo yast kdump dumplevel dump_level=24
dumptarget

Specifies the destination for saving dump images:

> sudo kdump dumptarget target=ssh server=name_server port=22 \
 dir=/var/log/dump user=user_name

For a complete list of options, run yast kdump dumptarget help.

immediatereboot

Controls whether the system should reboot immediately after saving the core in the Kdump kernel:

> sudo yast kdump immediatereboot enable
> sudo yast kdump immediatereboot disable
keepolddumps

Specifies how many old dump images are kept. Specify zero to keep them all:

> sudo yast kdump keepolddumps no=5
kernelcommandline

Specifies the command line that needs to be passed off to the kdump kernel:

> sudo yast kdump kernelcommandline command="ro root=LABEL=/"
kernelcommandlineappend

Specifies the command line that you need to append to the default command line string:

> sudo yast kdump kernelcommandlineappend command="ro root=LABEL=/"
notificationcc

Specifies an e-mail address for sending copies of notification messages:

> sudo yast kdump notificationcc email="user1@example.com user2@example.com"
notificationto

Specifies an e-mail address for sending notification messages:

> sudo yast kdump notificationto email="user1@example.com user2@example.com"
show

Displays kdump settings:

> sudo yast kdump show
Kdump is disabled
Dump Level: 31
Dump Format: compressed
Dump Target Settings
target: file
file directory: /var/crash
Kdump immediate reboots: Enabled
Numbers of old dumps: 5
smtppass

Specifies the file with the plain text SMTP password used for sending notification messages:

> sudo yast kdump smtppass pass=/path/to/file
smtpserver

Specifies the SMTP server host name used for sending notification messages:

> sudo yast kdump smtpserver server=smtp.server.com
smtpuser

Specifies the SMTP user name used for sending notification messages:

> sudo yast kdump smtpuser user=smtp_user
startup

Enables or disables start-up options:

> sudo yast kdump startup enable alloc_mem=128,256
> sudo yast kdump startup disable

1.4.3.10 yast keyboard Edit source

Configures the system keyboard for virtual consoles. It does not affect the keyboard settings in graphical desktop environments, such as GNOME or KDE. yast keyboard accepts the following commands:

list

Lists all available keyboard layouts.

set

Activates new keyboard layout setting:

> sudo yast keyboard set layout=czech
summary

Displays the current keyboard configuration.

1.4.3.11 yast lan Edit source

Configures network cards. yast lan accepts the following commands:

add

Configures a new network card:

> sudo yast lan add name=vlan50 ethdevice=eth0 bootproto=dhcp

For a complete list of options, run yast lan add help.

delete

Deletes an existing network card:

> sudo yast lan delete id=0
edit

Changes the configuration of an existing network card:

> sudo yast lan edit id=0 bootproto=dhcp
list

Displays a summary of network card configuration:

> sudo yast lan list
id name,           bootproto
0 Ethernet Card 0, NONE
1 Network Bridge,  DHCP

1.4.3.12 yast language Edit source

Configures system languages. yast language accepts the following commands:

list

Lists all available languages.

set

Specifies the main system languages and secondary languages:

> sudo yast language set lang=cs_CZ languages=en_US,es_ES no_packages

1.4.3.13 yast mail Edit source

Displays the configuration of the mail system:

> sudo yast mail summary

1.4.3.14 yast nfs Edit source

Controls the NFS client. yast nfs accepts the following commands:

add

Adds a new NFS mount:

> sudo yast nfs add spec=remote_host:/path/to/nfs/share file=/local/mount/point

For a complete list of options, run yast nfs add help.

delete

Deletes an existing NFS mount:

> sudo yast nfs delete spec=remote_host:/path/to/nfs/share file=/local/mount/point

For a complete list of options, run yast nfs delete help.

edit

Changes an existing NFS mount:

> sudo yast nfs edit spec=remote_host:/path/to/nfs/share \
 file=/local/mount/point type=nfs4

For a complete list of options, run yast nfs edit help.

list

Lists existing NFS mounts:

> sudo yast nfs list
Server            Remote File System    Mount Point    Options
----------------------------------------------------------------
nfs.example.com   /mnt                  /nfs/mnt       nfs
nfs.example.com   /home/tux/nfs_share   /nfs/tux       nfs

1.4.3.15 yast nfs-server Edit source

Configures the NFS server. yast nfs-server accepts the following commands:

add

Adds a directory to export:

> sudo yast nfs-server add mountpoint=/nfs/export hosts=*.allowed_hosts.com

For a complete list of options, run yast nfs-server add help.

delete

Deletes a directory from the NFS export:

 > sudo yast nfs-server delete mountpoint=/nfs/export
set

Specifies additional parameters for the NFS server:

> sudo yast nfs-server set enablev4=yes security=yes

For a complete list of options, run yast nfs-server set help.

start

Starts the NFS server service:

> sudo yast nfs-server start
stop

Stops the NFS server service:

> sudo yast nfs-server stop
summary

Displays a summary of the NFS server configuration:

> sudo yast nfs-server summary
NFS server is enabled
NFS Exports
* /mnt
* /home

NFSv4 support is enabled.
The NFSv4 domain for idmapping is localdomain.
NFS Security using GSS is enabled.

1.4.3.16 yast nis Edit source

Configures the NIS client. yast nis accepts the following commands:

configure

Changes global settings of a NIS client:

> sudo yast nis configure server=nis.example.com broadcast=yes

For a complete list of options, run yast nis configure help.

disable

Disables the NIS client:

> sudo yast nis disable
enable

Enables your machine as NIS client:

> sudo yast nis enable server=nis.example.com broadcast=yes automounter=yes

For a complete list of options, run yast nis enable help.

find

Shows available NIS servers for a given domain:

> sudo yast nis find domain=nisdomain.com
summary

Displays a configuration summary of a NIS client.

1.4.3.17 yast nis-server Edit source

Configures a NIS server. yast nis-server accepts the following commands:

master

Configures a NIS master server:

> sudo yast nis-server master domain=nisdomain.com yppasswd=yes

For a complete list of options, run yast nis-server master help.

slave

Configures a NIS worker server:

> sudo yast nis-server slave domain=nisdomain.com master_ip=10.100.51.65

For a complete list of options, run yast nis-server slave help.

stop

Stops a NIS server:

> sudo yast nis-server stop
summary

Displays a configuration summary of a NIS server:

> sudo yast nis-server summary

1.4.3.18 yast proxy Edit source

Configures proxy settings. yast proxy accepts the following commands:

authentication

Specifies the authentication options for proxy:

> sudo yast proxy authentication username=tux password=secret

For a complete list of options, run yast proxy authentication help.

enable, disable

Enables or disables proxy settings.

set

Changes the current proxy settings:

> sudo yast proxy set https=proxy.example.com

For a complete list of options, run yast proxy set help.

summary

Displays proxy settings.

1.4.3.19 yast rdp Edit source

Controls remote desktop settings. yast rdp accepts the following commands:

allow

Allows remote access to the server's desktop:

> sudo yast rdp allow set=yes
list

Displays the remote desktop configuration summary.

1.4.3.20 yast samba-client Edit source

Configures the Samba client settings. yast samba-client accepts the following commands:

configure

Changes global settings of Samba:

> sudo yast samba-client configure workgroup=FAMILY
isdomainmember

Checks whether the machine is a member of a domain:

> sudo yast samba-client isdomainmember domain=SMB_DOMAIN
joindomain

Makes the machine a member of a domain:

> sudo yast samba-client joindomain domain=SMB_DOMAIN user=username password=pwd
winbind

Enables or disables Winbind services (the winbindd daemon):

> sudo yast samba-client winbind enable
> sudo yast samba-client winbind disable

1.4.3.21 yast samba-server Edit source

Configures Samba server settings. yast samba-server accepts the following commands:

backend

Specifies the back-end for storing user information:

> sudo yast samba-server backend smbpasswd

For a complete list of options, run yast samba-server backend help.

configure

Configures global settings of the Samba server:

> sudo yast samba-server configure workgroup=FAMILY description='Home server'

For a complete list of options, run yast samba-server configure help.

list

Displays a list of available shares:

> sudo yast samba-server list
Status     Type Name
==============================
Disabled   Disk profiles
Enabled    Disk print$
Enabled    Disk homes
Disabled   Disk groups
Enabled    Disk movies
Enabled    Printer printers
role

Specifies the role of the Samba server:

> sudo yast samba-server role standalone

For a complete list of options, run yast samba-server role help.

service

Enables or disables the Samba services (smb and nmb):

> sudo yast samba-server service enable
> sudo yast samba-server service disable
share

Manipulates a single Samba share:

> sudo yast samba-server share name=movies browseable=yes guest_ok=yes

For a complete list of options, run yast samba-server share help.

1.4.3.22 yast security Edit source

Controls the security level of the host. yast security accepts the following commands:

level

Specifies the security level of the host:

> sudo yast security level server

For a complete list of options, run yast security level help.

set

Sets the value of a specific option:

> sudo yast security set passwd=sha512 crack=yes

For a complete list of options, run yast security set help.

summary

Displays a summary of the current security configuration:

sudoyast security summary

1.4.3.23 yast sound Edit source

Configures sound card settings. yast sound accepts the following commands:

add

Configures a new sound card. Without any parameters, the command adds the first detected card.

> sudo yast sound add card=0 volume=75

For a complete list of options, run yast sound add help.

channels

Lists available volume channels of a sound card:

> sudo yast sound channels card=0
Master 75
PCM 100
modules

Lists all available sound kernel modules:

> sudo yast sound modules
snd-atiixp ATI IXP AC97 controller (snd-atiixp)
snd-atiixp-modem ATI IXP MC97 controller (snd-atiixp-modem)
snd-virtuoso Asus Virtuoso driver (snd-virtuoso)
[...]
playtest

Plays a test sound on a sound card:

> sudo yast sound playtest card=0
remove

Removes a configured sound card:

> sudo yast sound remove card=0
> sudo yast sound remove all
set

Specifies new values for a sound card:

> sudo yast sound set card=0 volume=80
show

Displays detailed information about a sound card:

> sudo yast sound show card=0
Parameters of card 'ThinkPad X240' (using module snd-hda-intel):

align_buffer_size
 Force buffer and period sizes to be multiple of 128 bytes.
bdl_pos_adj
 BDL position adjustment offset.
beep_mode
 Select HDA Beep registration mode (0=off, 1=on) (default=1).
 Default Value: 0
enable_msi
 Enable Message Signaled Interrupt (MSI)
[...]
summary

Prints a configuration summary for all sound cards on the system:

> sudo yast sound summary
volume

Specifies the volume level of a sound card:

sudoyast sound volume card=0 play

1.4.3.24 yast sysconfig Edit source

Controls the variables in files under /etc/sysconfig. yast sysconfig accepts the following commands:

clear

Sets empty value to a variable:

> sudo yast sysconfig clear=POSTFIX_LISTEN
Tip
Tip: Variable in multiple files

If the variable is available in several files, use the VARIABLE_NAME$FILE_NAME syntax:

> sudo yast sysconfig clear=CONFIG_TYPE$/etc/sysconfig/mail
details

Displays detailed information about a variable:

> sudo yast sysconfig details variable=POSTFIX_LISTEN
Description:
Value:
File: /etc/sysconfig/postfix
Possible Values: Any value
Default Value:
Configuration Script: postfix
Description:
 Comma separated list of IP's
 NOTE: If not set, LISTEN on all interfaces
list

Displays summary of modified variables. Use all to list all variables and their values:

> sudo yast sysconfig list all
AOU_AUTO_AGREE_WITH_LICENSES="false"
AOU_ENABLE_CRONJOB="true"
AOU_INCLUDE_RECOMMENDS="false"
[...]
set

Sets a value for a variable:

> sudo yast sysconfig set DISPLAYMANAGER=gdm
Tip
Tip: Variable in multiple files

If the variable is available in several files, use the VARIABLE_NAME$FILE_NAME syntax:

> sudo yast sysconfig set CONFIG_TYPE$/etc/sysconfig/mail=advanced

1.4.3.25 yast tftp-server Edit source

Configures a TFTP server. yast tftp-server accepts the following commands:

directory

Specifies the directory of the TFTP server:

> sudo yast tftp-server directory path=/srv/tftp
> sudo yast tftp-server directory list
Directory Path: /srv/tftp
status

Controls the status of the TFTP server service:

> sudo yast tftp-server status disable
> sudo yast tftp-server status show
Service Status: false
> sudo yast tftp-server status enable

1.4.3.26 yast timezone Edit source

Configures the time zone. yast timezone accepts the following commands:

list

Lists all available time zones grouped by region:

> sudo yast timezone list
Region: Africa
Africa/Abidjan (Abidjan)
Africa/Accra (Accra)
Africa/Addis_Ababa (Addis Ababa)
[...]
set

Specifies new values for the time zone configuration:

> sudo yast timezone set timezone=Europe/Prague hwclock=local
summary

Displays the time zone configuration summary:

> sudo yast timezone summary
Current Time Zone: Europe/Prague
Hardware Clock Set To: Local time
Current Time and Date: Mon 12. March 2018, 11:36:21 CET

1.4.3.27 yast users Edit source

Manages user accounts. yast users accepts the following commands:

add

Adds a new user:

> sudo yast users add username=user1 password=secret home=/home/user1

For a complete list of options, run yast users add help.

delete

Deletes an existing user account:

> sudo yast users delete username=user1 delete_home

For a complete list of options, run yast users delete help.

edit

Changes an existing user account:

> sudo yast users edit username=user1 password=new_secret

For a complete list of options, run yast users edit help.

list

Lists existing users filtered by user type:

> sudo yast users list system

For a complete list of options, run yast users list help.

show

Displays details about a user:

> sudo yast users show username=wwwrun
Full Name: WWW daemon apache
List of Groups: www
Default Group: wwwrun
Home Directory: /var/lib/wwwrun
Login Shell: /sbin/nologin
Login Name: wwwrun
UID: 456

For a complete list of options, run yast users show help.

2 Managing software with command line tools Edit source

Abstract

This chapter describes Zypper and RPM, two command line tools for managing software. For a definition of the terminology used in this context (for example, repository, patch, or update) refer to Book “Start-Up”, Chapter 9 “Installing or removing software”, Section 9.1 “Definition of terms”.

2.1 Using Zypper Edit source

Zypper is a command line package manager for installing, updating, and removing packages. It also manages repositories. It is especially useful for accomplishing remote software management tasks or managing software from shell scripts.

2.1.1 General usage Edit source

The general syntax of Zypper is:

zypper [--global-options] COMMAND  [--command-options] [arguments]

The components enclosed in brackets are not required. See zypper help for a list of general options and all commands. To get help for a specific command, type zypper help COMMAND.

Zypper commands

The simplest way to execute Zypper is to type its name, followed by a command. For example, to apply all needed patches to the system, use:

> sudo zypper patch
Global options

Additionally, you can choose from one or more global options by typing them immediately before the command:

> sudo zypper --non-interactive patch

In the above example, the option --non-interactive means that the command is run without asking anything (automatically applying the default answers).

Command-specific options

To use options that are specific to a particular command, type them immediately after the command:

> sudo zypper patch --auto-agree-with-licenses

In the above example, --auto-agree-with-licenses is used to apply all needed patches to a system without you being asked to confirm any licenses. Instead, licenses will be accepted automatically.

Arguments

Some commands require one or more arguments. For example, when using the command install, you need to specify which package or which packages you want to install:

> sudo zypper install mplayer

Some options also require a single argument. The following command will list all known patterns:

> zypper search -t pattern

You can combine all of the above. For example, the following command will install the mc and vim packages from the factory repository while being verbose:

> sudo zypper -v install --from factory mc vim

The --from option keeps all repositories enabled (for solving any dependencies) while requesting the package from the specified repository. --repo is an alias for --from, and you may use either one.

Most Zypper commands have a dry-run option that does a simulation of the given command. It can be used for test purposes.

> sudo zypper remove --dry-run MozillaFirefox

Zypper supports the global --userdata STRING option. You can specify a string with this option, which gets written to Zypper's log files and plug-ins (such as the Btrfs plug-in). It can be used to mark and identify transactions in log files.

> sudo zypper --userdata STRING patch

2.1.2 Using Zypper subcommands Edit source

Zypper subcommands are executables that are stored in the directory specified by the zypper_execdir configuration option. It is /usr/lib/zypper/commands by default. If a subcommand is not found there, Zypper automatically searches the rest of your $PATH locations for it. This lets you create your own local extensions and store them in user space.

Executing subcommands in the Zypper shell, and using global Zypper options are not supported.

List your available subcommands:

> zypper help subcommand
[...]
Available zypper subcommands in '/usr/lib/zypper/commands'

  appstream-cache
  lifecycle
  migration
  search-packages

Zypper subcommands available from elsewhere on your $PATH

  log                   Zypper logfile reader
                            (/usr/sbin/zypper-log)

View the help screen for a subcommand:

> zypper help appstream-cache

2.1.3 Installing and removing software with Zypper Edit source

To install or remove packages, use the following commands:

> sudo zypper install PACKAGE_NAME
> sudo zypper remove PACKAGE_NAME
Warning
Warning: Do not remove mandatory system packages

Do not remove mandatory system packages like glibc , zypper , kernel . If they are removed, the system can become unstable or stop working altogether.

2.1.3.1 Selecting which packages to install or remove Edit source

There are various ways to address packages with the commands zypper install and zypper remove.

By exact package name
> sudo zypper install MozillaFirefox
By exact package name and version number
> sudo zypper install MozillaFirefox-52.2
By repository alias and package name
> sudo zypper install mozilla:MozillaFirefox

Where mozilla is the alias of the repository from which to install.

By package name using wild cards

You can select all packages that have names starting or ending with a certain string. Use wild cards with care, especially when removing packages. The following command will install all packages starting with Moz:

> sudo zypper install 'Moz*'
Tip
Tip: Removing all -debuginfo packages

When debugging a problem, you sometimes need to temporarily install a lot of -debuginfo packages which give you more information about running processes. After your debugging session finishes and you need to clean the environment, run the following:

> sudo zypper remove '*-debuginfo'
By capability

For example, to install a package without knowing its name, capabilities come in handy. The following command will install the package MozillaFirefox:

> sudo zypper install firefox
By capability, hardware architecture, or version

Together with a capability, you can specify a hardware architecture and a version:

  • The name of the desired hardware architecture is appended to the capability after a full stop. For example, to specify the AMD64/Intel 64 architectures (which in Zypper is named x86_64), use:

    > sudo zypper install 'firefox.x86_64'
  • Versions must be appended to the end of the string and must be preceded by an operator: < (lesser than), <= (lesser than or equal), = (equal), >= (greater than or equal), > (greater than).

    > sudo zypper install 'firefox>=74.2'
  • You can also combine a hardware architecture and version requirement:

    > sudo zypper install 'firefox.x86_64>=74.2'
By path to the RPM file

You can also specify a local or remote path to a package:

> sudo zypper install /tmp/install/MozillaFirefox.rpm
> sudo zypper install http://download.example.com/MozillaFirefox.rpm

2.1.3.2 Combining installation and removal of packages Edit source

To install and remove packages simultaneously, use the +/- modifiers. To install emacs and simultaneously remove vim , use:

> sudo zypper install emacs -vim

To remove emacs and simultaneously install vim , use:

> sudo zypper remove emacs +vim

To prevent the package name starting with the - being interpreted as a command option, always use it as the second argument. If this is not possible, precede it with --:

> sudo zypper install -emacs +vim       # Wrong
> sudo zypper install vim -emacs        # Correct
> sudo zypper install -- -emacs +vim    # Correct
> sudo zypper remove emacs +vim         # Correct

2.1.3.3 Cleaning up dependencies of removed packages Edit source

If (together with a certain package), you automatically want to remove any packages that become unneeded after removing the specified package, use the --clean-deps option:

> sudo zypper rm --clean-deps PACKAGE_NAME

2.1.3.4 Using Zypper in scripts Edit source

By default, Zypper asks for a confirmation before installing or removing a selected package, or when a problem occurs. You can override this behavior using the --non-interactive option. This option must be given before the actual command (install, remove, and patch), as can be seen in the following:

> sudo zypper --non-interactive install PACKAGE_NAME

This option allows the use of Zypper in scripts and cron jobs.

2.1.3.5 Installing or downloading source packages Edit source

To install the corresponding source package of a package, use:

> zypper source-install PACKAGE_NAME

When executed as root, the default location to install source packages is /usr/src/packages/ and ~/rpmbuild when run as user. These values can be changed in your local rpm configuration.

This command will also install the build dependencies of the specified package. If you do not want this, add the switch -D:

> sudo zypper source-install -D PACKAGE_NAME

To install only the build dependencies use -d.

> sudo zypper source-install -d PACKAGE_NAME

Of course, this will only work if you have the repository with the source packages enabled in your repository list (it is added by default, but not enabled). See Section 2.1.6, “Managing repositories with Zypper” for details on repository management.

A list of all source packages available in your repositories can be obtained with:

> zypper search -t srcpackage

You can also download source packages for all installed packages to a local directory. To download source packages, use:

> zypper source-download

The default download directory is /var/cache/zypper/source-download. You can change it using the --directory option. To only show missing or extraneous packages without downloading or deleting anything, use the --status option. To delete extraneous source packages, use the --delete option. To disable deleting, use the --no-delete option.

2.1.3.6 Installing packages from disabled repositories Edit source

Normally you can only install or refresh packages from enabled repositories. The --plus-content TAG option helps you specify repositories to be refreshed, temporarily enabled during the current Zypper session, and disabled after it completes.

For example, to enable repositories that may provide additional -debuginfo or -debugsource packages, use --plus-content debug. You can specify this option multiple times.

To temporarily enable such 'debug' repositories to install a specific -debuginfo package, use the option as follows:

> sudo zypper --plus-content debug \
   install "debuginfo(build-id)=eb844a5c20c70a59fc693cd1061f851fb7d046f4"

The build-id string is reported by gdb for missing debuginfo packages.

Note
Note: Disabled installation media

Repositories from the openSUSE Leap installation media are still configured but disabled after successful installation. You can use the --plus-content option to install packages from the installation media instead of the online repositories. Before calling zypper, ensure the media is available, for example by inserting the DVD into the computer's drive.

2.1.3.7 Utilities Edit source

To verify whether all dependencies are still fulfilled and to repair missing dependencies, use:

> zypper verify

In addition to dependencies that must be fulfilled, some packages recommend other packages. These recommended packages are only installed if actually available and installable. In case recommended packages were made available after the recommending package has been installed (by adding additional packages or hardware), use the following command:

> sudo zypper install-new-recommends

This command is very useful after plugging in a Web cam or Wi-Fi device. It will install drivers for the device and related software, if available. Drivers and related software are only installable if certain hardware dependencies are fulfilled.

2.1.4 Updating software with Zypper Edit source

There are three different ways to update software using Zypper: by installing patches, by installing a new version of a package or by updating the entire distribution. The latter is achieved with zypper dist-upgrade. Upgrading openSUSE Leap is discussed in Book “Start-Up”, Chapter 12 “Upgrading the system and system changes”.

2.1.4.1 Installing all needed patches Edit source

Patching openSUSE Leap is the most reliable way to install new versions of installed packages. It guarantees that all required packages with correct versions are installed and ensures that package versions considered as conflicting are omitted.

To install all officially released patches that apply to your system, run:

> sudo zypper patch

All patches available from repositories configured on your computer are checked for their relevance to your installation. If they are relevant (and not classified as optional or feature), they are installed immediately. If zypper patch succeeds, it is guaranteed that no vulnerable version package is installed unless you confirm the exception.

If a patch that is about to be installed includes changes that require a system reboot, you will be warned before.

The plain zypper patch command does not apply patches from third party repositories. To update also the third party repositories, use the with-update command option as follows:

> sudo zypper patch --with-update

To install also optional patches, use:

> sudo zypper patch --with-optional

To install all patches relating to a specific Bugzilla issue, use:

> sudo zypper patch --bugzilla=NUMBER

To install all patches relating to a specific CVE database entry, use:

> sudo zypper patch --cve=NUMBER

For example, to install a security patch with the CVE number CVE-2010-2713, execute:

> sudo zypper patch --cve=CVE-2010-2713

To install only patches which affect Zypper and the package management itself, use:

> sudo zypper patch --updatestack-only

Bear in mind that other command options that would also update other repositories will be dropped if you use the updatestack-only command option.

2.1.4.2 Listing patches Edit source

To find out whether patches are available, Zypper allows viewing the following information:

Number of needed patches

To list the number of needed patches (patches that apply to your system but are not yet installed), use patch-check:

> zypper patch-check
Loading repository data...
Reading installed packages...
5 patches needed (1 security patch)

This command can be combined with the --updatestack-only option to list only the patches which affect Zypper and the package management itself.

List of needed patches

To list all needed patches (patches that apply to your system but are not yet installed), use zypper list-patches.

List of all patches

To list all patches available for openSUSE Leap, regardless of whether they are already installed or apply to your installation, use zypper patches.

It is also possible to list and install patches relevant to specific issues. To list specific patches, use the zypper list-patches command with the following options:

By Bugzilla issues

To list all needed patches that relate to Bugzilla issues, use the option --bugzilla.

To list patches for a specific bug, you can also specify a bug number: --bugzilla=NUMBER. To search for patches relating to multiple Bugzilla issues, add commas between the bug numbers, for example:

> zypper list-patches --bugzilla=972197,956917
By CVE number

To list all needed patches that relate to an entry in the CVE database (Common Vulnerabilities and Exposures), use the option --cve.

To list patches for a specific CVE database entry, you can also specify a CVE number: --cve=NUMBER. To search for patches relating to multiple CVE database entries, add commas between the CVE numbers, for example:

> zypper list-patches --cve=CVE-2016-2315,CVE-2016-2324
Patch with conflicting packages
Information for patch openSUSE-SLE-15.3-2022-333:
-------------------------------------------------
Repository  : Update repository with updates from SUSE Linux Enterprise 15
Name        : openSUSE-SLE-15.3-2022-333
Version     : 1
Arch        : noarch
Vendor      : maint-coord@suse.de
Status      : needed
Category    : security
Severity    : important
Created On  : Fri Feb  4 09:30:32 2022
Interactive : reboot
Summary     : Security update for xen
Description :
    This update for xen fixes the following issues:

    - CVE-2022-23033: Fixed guest_physmap_remove_page not removing the p2m mappings. (XSA-393) (bsc#1194576)
    - CVE-2022-23034: Fixed possible DoS by a PV guest Xen while unmapping a grant. (XSA-394) (bsc#1194581)
    - CVE-2022-23035: Fixed insufficient cleanup of passed-through device IRQs. (XSA-395) (bsc#1194588)
Provides    : patch:openSUSE-SLE-15.3-2022-333 = 1
Conflicts   : [22]
    xen.src < 4.14.3_06-150300.3.18.2
    xen.noarch < 4.14.3_06-150300.3.18.2
    xen.x86_64 < 4.14.3_06-150300.3.18.2
    xen-devel.x86_64 < 4.14.3_06-150300.3.18.2
    xen-devel.noarch < 4.14.3_06-150300.3.18.2
[...]

The above patch conflicts with the affected or vulnerable versions of 22 packages. If any of these affected or vulnerable packages are installed, it triggers a conflict, and the patch is classified as needed. zypper patch tries to install all available patches. If it encounters problems, it reports them, thus informing you that not all updates are installed. The conflict can be resolved by either updating the affected or vulnerable packages or by removing them. Because SUSE update repositories also ship fixed packages, updating is a standard way to resolve conflicts. If the package cannot be updated—for example, because of dependency issues or package locks—it is deleted after the user's approval.

To list all patches regardless of whether they are needed, use the option --all additionally. For example, to list all patches with a CVE number assigned, use:

> zypper list-patches --all --cve
Issue | No.           | Patch             | Category    | Severity  | Status
------+---------------+-------------------+-------------+-----------+----------
cve   | CVE-2019-0287 | SUSE-SLE-Module.. | recommended | moderate  | needed
cve   | CVE-2019-3566 | SUSE-SLE-SERVER.. | recommended | moderate  | not needed
[...]

2.1.4.3 Installing new package versions Edit source

If a repository contains only new packages, but does not provide patches, zypper patch does not show any effect. To update all installed packages with newer available versions, use the following command:

> sudo zypper update
Important
Important

zypper update ignores problematic packages. For example, if a package is locked, zypper update omits the package, even if a higher version of it is available. Conversely, zypper patch reports a conflict if the package is considered vulnerable.

To update individual packages, specify the package with either the update or install command:

> sudo zypper update PACKAGE_NAME
> sudo zypper install PACKAGE_NAME

A list of all new installable packages can be obtained with the command:

> zypper list-updates

Note that this command only lists packages that match the following criteria:

  • has the same vendor like the already installed package,

  • is provided by repositories with at least the same priority than the already installed package,

  • is installable (all dependencies are satisfied).

A list of all new available packages (regardless whether installable or not) can be obtained with:

> sudo zypper list-updates --all

To find out why a new package cannot be installed, use the zypper install or zypper update command as described above.

2.1.4.4 Identifying orphaned packages Edit source

Whenever you remove a repository from Zypper or upgrade your system, some packages can get in an orphaned state. These orphaned packages belong to no active repository anymore. The following command gives you a list of these:

> sudo zypper packages --orphaned

With this list, you can decide if a package is still needed or can be removed safely.

2.1.5 Identifying processes and services using deleted files Edit source

When patching, updating, or removing packages, there may be running processes on the system which continue to use files having been deleted by the update or removal. Use zypper ps to list processes using deleted files. In case the process belongs to a known service, the service name is listed, making it easy to restart the service. By default zypper ps shows a table:

> zypper ps
PID   | PPID | UID | User  | Command      | Service      | Files
------+------+-----+-------+--------------+--------------+-------------------
814   | 1    | 481 | avahi | avahi-daemon | avahi-daemon | /lib64/ld-2.19.s->
      |      |     |       |              |              | /lib64/libdl-2.1->
      |      |     |       |              |              | /lib64/libpthrea->
      |      |     |       |              |              | /lib64/libc-2.19->
[...]
PID: ID of the process
PPID: ID of the parent process
UID: ID of the user running the process
Login: Login name of the user running the process
Command: Command used to execute the process
Service: Service name (only if command is associated with a system service)
Files: The list of the deleted files

The output format of zypper ps can be controlled as follows:

zypper ps-s

Create a short table not showing the deleted files.

> zypper ps -s
PID   | PPID | UID  | User    | Command      | Service
------+------+------+---------+--------------+--------------
814   | 1    | 481  | avahi   | avahi-daemon | avahi-daemon
817   | 1    | 0    | root    | irqbalance   | irqbalance
1567  | 1    | 0    | root    | sshd         | sshd
1761  | 1    | 0    | root    | master       | postfix
1764  | 1761 | 51   | postfix | pickup       | postfix
1765  | 1761 | 51   | postfix | qmgr         | postfix
2031  | 2027 | 1000 | tux     | bash         |
zypper ps-ss

Show only processes associated with a system service.

PID   | PPID | UID  | User    | Command      | Service
------+------+------+---------+--------------+--------------
814   | 1    | 481  | avahi   | avahi-daemon | avahi-daemon
817   | 1    | 0    | root    | irqbalance   | irqbalance
1567  | 1    | 0    | root    | sshd         | sshd
1761  | 1    | 0    | root    | master       | postfix
1764  | 1761 | 51   | postfix | pickup       | postfix
1765  | 1761 | 51   | postfix | qmgr         | postfix
zypper ps-sss

Only show system services using deleted files.

avahi-daemon
irqbalance
postfix
sshd
zypper ps--print "systemctl status %s"

Show the commands to retrieve status information for services which might need a restart.

systemctl status avahi-daemon
systemctl status irqbalance
systemctl status postfix
systemctl status sshd

For more information about service handling refer to Chapter 10, The systemd daemon.

2.1.6 Managing repositories with Zypper Edit source

All installation or patch commands of Zypper rely on a list of known repositories. To list all repositories known to the system, use the command:

> zypper repos

The result will look similar to the following output:

Example 2.1: Zypper—list of known repositories
> zypper repos
#  | Alias                 | Name             | Enabled | GPG Check | Refresh
---+-----------------------+------------------+---------+-----------+--------
 1 | Leap-15.1-Main        | Main (OSS)       | Yes     | (r ) Yes  | Yes
 2 | Leap-15.1-Update      | Update (OSS)     | Yes     | (r ) Yes  | Yes
 3 | Leap-15.1-NOSS        | Main (NON-OSS)   | Yes     | (r ) Yes  | Yes
 4 | Leap-15.1-Update-NOSS | Update (NON-OSS) | Yes     | (r ) Yes  | Yes
[...]

When specifying repositories in various commands, an alias, URI or repository number from the zypper repos command output can be used. A repository alias is a short version of the repository name for use in repository handling commands. Note that the repository numbers can change after modifying the list of repositories. The alias will never change by itself.

By default, details such as the URI or the priority of the repository are not displayed. Use the following command to list all details:

> zypper repos -d

2.1.6.1 Adding repositories Edit source

To add a repository, run

> sudo zypper addrepo URI ALIAS

URI can either be an Internet repository, a network resource, a directory or a CD or DVD (see https://en.opensuse.org/openSUSE:Libzypp_URIs for details). The ALIAS is a shorthand and unique identifier of the repository. You can freely choose it, with the only exception that it needs to be unique. Zypper will issue a warning if you specify an alias that is already in use.

2.1.6.2 Refreshing repositories Edit source

zypper enables you to fetch changes in packages from configured repositories. To fetch the changes, run:

> sudo zypper refresh
Note
Note: Default behavior of zypper

By default, some commands perform refresh automatically, so you do not need to run the command explicitly.

The refresh command enables you to view changes also in disabled repositories, by using the --plus-content option:

> sudo zypper --plus-content refresh

This option fetches changes in repositories, but keeps the disabled repositories in the same state—disabled.

2.1.6.3 Removing repositories Edit source

To remove a repository from the list, use the command zypper removerepo together with the alias or number of the repository you want to delete. For example, to remove the repository Non-OSS Repository from Example 2.1, “Zypper—list of known repositories”, use one of the following commands:

> sudo zypper removerepo 4
> sudo zypper removerepo "Non-OSS Repository"

2.1.6.4 Modifying repositories Edit source

Enable or disable repositories with zypper modifyrepo. You can also alter the repository's properties (such as refreshing behavior, name or priority) with this command. The following command will enable the repository named updates, turn on auto-refresh and set its priority to 20:

> sudo zypper modifyrepo -er -p 20 'updates'

Modifying repositories is not limited to a single repository—you can also operate on groups:

-a: all repositories
-l: local repositories
-t: remote repositories
-m TYPE: repositories of a certain type (where TYPE can be one of the following: http, https, ftp, cd, dvd, dir, file, cifs, smb, nfs, hd, iso)

To rename a repository alias, use the renamerepo command. The following example changes the alias from Mozilla Firefox to firefox:

> sudo zypper renamerepo 'Mozilla Firefox' firefox

2.1.7 Querying repositories and packages with Zypper Edit source

Zypper offers various methods to query repositories or packages. To get lists of all products, patterns, packages or patches available, use the following commands:

> zypper products
> zypper patterns
> zypper packages
> zypper patches

To query all repositories for certain packages, use search. To get information regarding particular packages, use the info command.

2.1.7.2 Searching for specific capability Edit source

To search for packages which provide a special capability, use the command what-provides. For example, if you want to know which package provides the Perl module SVN::Core, use the following command:

> zypper what-provides 'perl(SVN::Core)'

The what-provides PACKAGE_NAME is similar to rpm -q --whatprovides PACKAGE_NAME, but RPM is only able to query the RPM database (that is the database of all installed packages). Zypper, on the other hand, will tell you about providers of the capability from any repository, not only those that are installed.

2.1.7.3 Showing package information Edit source

To query single packages, use info with an exact package name as an argument. This displays detailed information about a package. In case the package name does not match any package name from repositories, the command outputs detailed information for non-package matches. If you request a specific type (by using the -t option) and the type does not exist, the command outputs other available matches but without detailed information.

If you specify a source package, the command displays binary packages built from the source package. If you specify a binary package, the command outputs the source packages used to build the binary package.

To also show what is required/recommended by the package, use the options --requires and --recommends:

> zypper info --requires MozillaFirefox

2.1.8 Configuring Zypper Edit source

Zypper now comes with a configuration file, allowing you to permanently change Zypper's behavior (either system-wide or user-specific). For system-wide changes, edit /etc/zypp/zypper.conf. For user-specific changes, edit ~/.zypper.conf. If ~/.zypper.conf does not yet exist, you can use /etc/zypp/zypper.conf as a template: copy it to ~/.zypper.conf and adjust it to your liking. Refer to the comments in the file for help about the available options.

2.1.9 Troubleshooting Edit source

If you have trouble accessing packages from configured repositories (for example, Zypper cannot find a certain package even though you know it exists in one of the repositories), refreshing the repositories may help:

> sudo zypper refresh

If that does not help, try

> sudo zypper refresh -fdb

This forces a complete refresh and rebuild of the database, including a forced download of raw metadata.

2.1.10 Zypper rollback feature on Btrfs file system Edit source

If the Btrfs file system is used on the root partition and snapper is installed, Zypper automatically calls snapper when committing changes to the file system to create appropriate file system snapshots. These snapshots can be used to revert any changes made by Zypper. See Chapter 3, System recovery and snapshot management with Snapper for more information.

2.1.11 More information Edit source

For more information on managing software from the command line, enter zypper help, zypper help  COMMAND or refer to the zypper(8) man page. For a complete and detailed command reference, cheat sheets with the most important commands, and information on how to use Zypper in scripts and applications, refer to https://en.opensuse.org/SDB:Zypper_usage. A list of software changes for the latest openSUSE Leap version can be found at https://en.opensuse.org/openSUSE:Zypper_versions.

2.2 RPM—the package manager Edit source

RPM (RPM Package Manager) is used for managing software packages. Its main commands are rpm and rpmbuild. The powerful RPM database can be queried by the users, system administrators and package builders for detailed information about the installed software.

rpm has five modes: installing, uninstalling (or updating) software packages, rebuilding the RPM database, querying RPM bases or individual RPM archives, integrity checking of packages and signing packages. rpmbuild can be used to build installable packages from pristine sources.

Installable RPM archives are packed in a special binary format. These archives consist of the program files to install and certain meta information used during the installation by rpm to configure the software package or stored in the RPM database for documentation purposes. RPM archives normally have the extension .rpm.

Tip
Tip: Software development packages

For several packages, the components needed for software development (libraries, headers, include files, etc.) have been put into separate packages. These development packages are only needed if you want to compile software yourself (for example, the most recent GNOME packages). They can be identified by the name extension -devel, such as the packages alsa-devel and gimp-devel.

2.2.1 Verifying package authenticity Edit source

RPM packages have a GPG signature. To verify the signature of an RPM package, use the command rpm --checksig  PACKAGE-1.2.3.rpm to determine whether the package originates from SUSE or from another trustworthy facility. This is especially recommended for update packages from the Internet.

2.2.2 Managing packages: install, update, and uninstall Edit source

Normally, the installation of an RPM archive is quite simple: rpm -i PACKAGE.rpm. With this command the package is installed, but only if its dependencies are fulfilled and if there are no conflicts with other packages. With an error message, rpm requests those packages that need to be installed to meet dependency requirements. In the background, the RPM database ensures that no conflicts arise—a specific file can only belong to one package. By choosing different options, you can force rpm to ignore these defaults, but this is only for experts. Otherwise, you risk compromising the integrity of the system and possibly jeopardize the ability to update the system.

The options -U or --upgrade and -F or --freshen can be used to update a package (for example, rpm -F PACKAGE.rpm). This command removes the files of the old version and immediately installs the new files. The difference between the two versions is that -U installs packages that previously did not exist in the system, while -F merely updates previously installed packages. When updating, rpm updates configuration files carefully using the following strategy:

  • If a configuration file was not changed by the system administrator, rpm installs the new version of the appropriate file. No action by the system administrator is required.

  • If a configuration file was changed by the system administrator before the update, rpm saves the changed file with the extension .rpmorig or .rpmsave (backup file) and installs the version from the new package. This is done only if the originally installed file and the newer version are different. If this is the case, compare the backup file (.rpmorig or .rpmsave) with the newly installed file and make your changes again in the new file. Afterward, delete all .rpmorig and .rpmsave files to avoid problems with future updates.

  • .rpmnew files appear if the configuration file already exists and if the noreplace label was specified in the .spec file.

Following an update, .rpmsave and .rpmnew files should be removed after comparing them, so they do not obstruct future updates. The .rpmorig extension is assigned if the file has not previously been recognized by the RPM database.

Otherwise, .rpmsave is used. In other words, .rpmorig results from updating from a foreign format to RPM. .rpmsave results from updating from an older RPM to a newer RPM. .rpmnew does not disclose any information to whether the system administrator has made any changes to the configuration file. A list of these files is available in /var/adm/rpmconfigcheck. Some configuration files (like /etc/httpd/httpd.conf) are not overwritten to allow continued operation.

The -U switch is not only an equivalent to uninstalling with the -e option and installing with the -i option. Use -U whenever possible.

To remove a package, enter rpm -e PACKAGE. This command only deletes the package if there are no unresolved dependencies. It is theoretically impossible to delete Tcl/Tk, for example, as long as another application requires it. Even in this case, RPM calls for assistance from the database. If such a deletion is, for whatever reason, impossible (even if no additional dependencies exist), it may be helpful to rebuild the RPM database using the option --rebuilddb.

2.2.3 Delta RPM packages Edit source

Delta RPM packages contain the difference between an old and a new version of an RPM package. Applying a delta RPM onto an old RPM results in a completely new RPM. It is not necessary to have a copy of the old RPM because a delta RPM can also work with an installed RPM. The delta RPM packages are even smaller in size than patch RPMs, which is an advantage when transferring update packages over the Internet. The drawback is that update operations with delta RPMs involved consume considerably more CPU cycles than plain or patch RPMs.

The makedeltarpm and applydelta binaries are part of the delta RPM suite (package deltarpm) and help you create and apply delta RPM packages. With the following commands, you can create a delta RPM called new.delta.rpm. The following command assumes that old.rpm and new.rpm are present:

> sudo makedeltarpm old.rpm new.rpm new.delta.rpm

Using applydeltarpm, you can reconstruct the new RPM from the file system if the old package is already installed:

> sudo applydeltarpm new.delta.rpm new.rpm

To derive it from the old RPM without accessing the file system, use the -r option:

> sudo applydeltarpm -r old.rpm new.delta.rpm new.rpm

See /usr/share/doc/packages/deltarpm/README for technical details.

2.2.4 RPM queries Edit source

With the -q option rpm initiates queries, making it possible to inspect an RPM archive (by adding the option -p) and to query the RPM database of installed packages. Several switches are available to specify the type of information required. See Table 2.1, “Essential RPM query options”.

Table 2.1: Essential RPM query options

-i

Package information

-l

File list

-f FILE

Query the package that contains the file FILE (the full path must be specified with FILE)

-s

File list with status information (implies -l)

-d

List only documentation files (implies -l)

-c

List only configuration files (implies -l)

--dump

File list with complete details (to be used with -l, -c, or -d)

--provides

List features of the package that another package can request with --requires

--requires, -R

Capabilities the package requires

--scripts

Installation scripts (preinstall, postinstall, uninstall)

For example, the command rpm -q -i wget displays the information shown in Example 2.2, “rpm -q -i wget.

Example 2.2: rpm -q -i wget
Name        : wget
Name        : wget
Version     : 1.19.5
Release     : lp151.4.1
Architecture: x86_64
Install Date: Tue 30 Jul 2019 02:26:21 PM PDT
Group       : Productivity/Networking/Web/Utilities
Size        : 2881903
License     : GPL-3.0+
Signature   : RSA/SHA256, Thu 11 Apr 2019 02:23:42 AM PDT, Key ID b88b2fd43dbdc284
Source RPM  : wget-1.19.5-lp151.4.1.src.rpm
Build Date  : Thu 11 Apr 2019 02:23:27 AM PDT
Build Host  : cloud114
Relocations : (not relocatable)
Packager    : https://bugs.opensuse.org
Vendor      : openSUSE
URL         : https://www.gnu.org/software/wget/
Summary     : A Tool for Mirroring FTP and HTTP Servers
Description :
Wget enables you to retrieve WWW documents or FTP files from a server.
This can be done in script files or via the command line.
Distribution: openSUSE Leap 15.1

The option -f only works if you specify the complete file name with its full path. Provide as many file names as desired. For example:

> rpm -q -f /bin/rpm /usr/bin/wget
rpm-4.14.1-lp151.13.10.x86_64
wget-1.19.5-lp151.4.1.x86_64

If only part of the file name is known, use a shell script as shown in Example 2.3, “Script to search for packages”. Pass the partial file name to the script shown as a parameter when running it.

The command rpm -q --changelog PACKAGE displays a detailed list of change information about a specific package, sorted by date.

With the installed RPM database, verification checks can be made. Initiate these with -V, or --verify. With this option, rpm shows all files in a package that have been changed since installation. rpm uses eight character symbols to give some hints about the following changes:

Table 2.2: RPM verify options

5

MD5 check sum

S

File size

L

Symbolic link

T

Modification time

D

Major and minor device numbers

U

Owner

G

Group

M

Mode (permissions and file type)

In the case of configuration files, the letter c is printed. For example, for changes to /etc/wgetrc (wget package):

> rpm -V wget
S.5....T c /etc/wgetrc

The files of the RPM database are placed in /var/lib/rpm. If the partition /usr has a size of 1 GB, this database can occupy nearly 30 MB, especially after a complete update. If the database is much larger than expected, it is useful to rebuild the database with the option --rebuilddb. Before doing this, make a backup of the old database. The cron script cron.daily makes daily copies of the database (packed with gzip) and stores them in /var/adm/backup/rpmdb. The number of copies is controlled by the variable MAX_RPMDB_BACKUPS (default: 5) in /etc/sysconfig/backup. The size of a single backup is approximately 1 MB for 1 GB in /usr.

2.2.5 Installing and compiling source packages Edit source

All source packages carry a .src.rpm extension (source RPM).

Note
Note: Installed source packages

Source packages can be copied from the installation medium to the hard disk and unpacked with YaST. They are not, however, marked as installed ([i]) in the package manager. This is because the source packages are not entered in the RPM database. Only installed operating system software is listed in the RPM database. When you install a source package, only the source code is added to the system.

The following directories must be available for rpm and rpmbuild in /usr/src/packages (unless you specified custom settings in a file like /etc/rpmrc):

SOURCES

for the original sources (.tar.bz2 or .tar.gz files, etc.) and for distribution-specific adjustments (mostly .diff or .patch files)

SPECS

for the .spec files, similar to a meta Makefile, which control the build process

BUILD

all the sources are unpacked, patched and compiled in this directory

RPMS

where the completed binary packages are stored

SRPMS

here are the source RPMs

When you install a source package with YaST, all the necessary components are installed in /usr/src/packages: the sources and the adjustments in SOURCES and the relevant .spec file in SPECS.

Warning
Warning: System integrity

Do not experiment with system components (glibc, rpm, etc.), because this endangers the stability of your system.

The following example uses the wget.src.rpm package. After installing the source package, you should have files similar to those in the following list:

/usr/src/packages/SOURCES/wget-1.19.5.tar.bz2
/usr/src/packages/SOURCES/wgetrc.patch
/usr/src/packages/SPECS/wget.spec

rpmbuild -bX /usr/src/packages/SPECS/wget.spec starts the compilation. X is a wild card for various stages of the build process (see the output of --help or the RPM documentation for details). The following is merely a brief explanation:

-bp

Prepare sources in /usr/src/packages/BUILD: unpack and patch.

-bc

Do the same as -bp, but with additional compilation.

-bi

Do the same as -bp, but with additional installation of the built software. Caution: if the package does not support the BuildRoot feature, you might overwrite configuration files.

-bb

Do the same as -bi, but with the additional creation of the binary package. If the compile was successful, the binary should be in /usr/src/packages/RPMS.

-ba

Do the same as -bb, but with the additional creation of the source RPM. If the compilation was successful, the binary should be in /usr/src/packages/SRPMS.

--short-circuit

Skip some steps.

The binary RPM created can now be installed with rpm -i or, preferably, with rpm -U. Installation with rpm makes it appear in the RPM database.

Keep in mind that the BuildRoot directive in the spec file is deprecated. If you still need this feature, use the --buildroot option as a workaround.

2.2.6 Compiling RPM packages with build Edit source

The danger with many packages is that unwanted files are added to the running system during the build process. To prevent this use build, which creates a defined environment in which the package is built. To establish this chroot environment, the build script must be provided with a complete package tree. This tree can be made available on the hard disk, via NFS, or from DVD. Set the position with build --rpms DIRECTORY. Unlike rpm, the build command looks for the .spec file in the source directory. To build wget (like in the above example) with the DVD mounted in the system under /media/dvd, use the following commands as root:

# cd /usr/src/packages/SOURCES/
# mv ../SPECS/wget.spec .
# build --rpms /media/dvd/suse/ wget.spec

Subsequently, a minimum environment is established at /var/tmp/build-root. The package is built in this environment. Upon completion, the resulting packages are located in /var/tmp/build-root/usr/src/packages/RPMS.

The build script offers several additional options. For example, cause the script to prefer your own RPMs, omit the initialization of the build environment or limit the rpm command to one of the above-mentioned stages. Access additional information with build --help and by reading the build man page.

2.2.7 Tools for RPM archives and the RPM database Edit source

Midnight Commander (mc) can display the contents of RPM archives and copy parts of them. It represents archives as virtual file systems, offering all usual menu options of Midnight Commander. Display the HEADER with F3. View the archive structure with the cursor keys and Enter. Copy archive components with F5.

A full-featured package manager is available as a YaST module. For details, see Book “Start-Up”, Chapter 9 “Installing or removing software”.

3 System recovery and snapshot management with Snapper Edit source

Abstract

Snapper allows creating and managing file system snapshots. File system snapshots allow keeping a copy of the state of a file system at a certain point of time. The standard setup of Snapper is designed to allow rolling back system changes. However, you can also use it to create on-disk backups of user data. As the basis for this functionality, Snapper uses the Btrfs file system or thinly-provisioned LVM volumes with an XFS or Ext4 file system.

Snapper has a command line interface and a YaST interface. Snapper lets you create and manage file system snapshots on the following types of file systems:

  • Btrfs, a copy-on-write file system for Linux that natively supports file system snapshots of subvolumes. (Subvolumes are separately mountable file systems within a physical partition.)

    You can also boot from Btrfs snapshots. For more information, see Section 3.3, “System rollback by booting from snapshots”.

  • Thinly-provisioned LVM volumes formatted with XFS or Ext4.

Using Snapper, you can perform the following tasks:

3.1 Default setup Edit source

Snapper on openSUSE Leap is set up as an undo and recovery tool for system changes. By default, the root partition (/) of openSUSE Leap is formatted with Btrfs. Taking snapshots is automatically enabled if the root partition (/) is big enough (more than approximately 16 GB). By default, snapshots are disabled on partitions other than /.

Tip
Tip: Enabling Snapper in the installed system

If you disabled Snapper during the installation, you can enable it at any time later. To do so, create a default Snapper configuration for the root file system by running:

> sudo snapper -c root create-config /

Afterward enable the different snapshot types as described in Section 3.1.4.1, “Disabling/enabling snapshots”.

Note that on a Btrfs root file system, snapshots require a file system with subvolumes configured as proposed by the installer and a partition size of at least 16 GB.

When a snapshot is created, both the snapshot and the original point to the same blocks in the file system. So, initially a snapshot does not occupy additional disk space. If data in the original file system is modified, changed data blocks are copied while the old data blocks are kept for the snapshot. Therefore, a snapshot occupies the same amount of space as the data modified. So, over time, the amount of space a snapshot allocates, constantly grows. As a consequence, deleting files from a Btrfs file system containing snapshots may not free disk space!

Note
Note: Snapshot location

Snapshots always reside on the same partition or subvolume on which the snapshot has been taken. It is not possible to store snapshots on a different partition or subvolume.

As a result, partitions containing snapshots need to be larger than partitions not containing snapshots. The exact amount depends strongly on the number of snapshots you keep and the amount of data modifications. As a rule of thumb, give partitions twice as much space as you normally would. To prevent disks from running out of space, old snapshots are automatically cleaned up. Refer to Section 3.1.4.4, “Controlling snapshot archiving” for details.

3.1.1 Default settings Edit source

Disks larger than 16 GB
  • Configuration file: /etc/snapper/configs/root

  • USE_SNAPPER=yes

  • TIMELINE_CREATE=no

Disks smaller than 16 GB
  • Configuration file: not created

  • USE_SNAPPER=no

  • TIMELINE_CREATE=yes

3.1.2 Types of snapshots Edit source

Although snapshots themselves do not differ in a technical sense, we distinguish between three types of snapshots, based on the events that trigger them:

Timeline snapshots

A single snapshot is created every hour. Old snapshots are automatically deleted. By default, the first snapshot of the last ten days, months, and years are kept. Using the YaST OS installation method (default), timeline snapshots are enabled, except for the root file system.

Installation snapshots

Whenever one or more packages are installed with YaST or Zypper, a pair of snapshots is created: one before the installation starts (Pre) and another one after the installation has finished (Post). In case an important system component such as the kernel has been installed, the snapshot pair is marked as important (important=yes). Old snapshots are automatically deleted. By default the last ten important snapshots and the last ten regular (including administration snapshots) snapshots are kept. Installation snapshots are enabled by default.

Administration snapshots

Whenever you administrate the system with YaST, a pair of snapshots is created: one when a YaST module is started (Pre) and another when the module is closed (Post). Old snapshots are automatically deleted. By default the last ten important snapshots and the last ten regular snapshots (including installation snapshots) are kept. Administration snapshots are enabled by default.

3.1.3 Directories that are excluded from snapshots Edit source

Some directories need to be excluded from snapshots for different reasons. The following list shows all directories that are excluded:

/boot/grub2/i386-pc, /boot/grub2/x86_64-efi, /boot/grub2/powerpc-ieee1275, /boot/grub2/s390x-emu

A rollback of the boot loader configuration is not supported. The directories listed above are architecture-specific. The first two directories are present on AMD64/Intel 64 machines, the latter two on IBM POWER and on IBM Z, respectively.

/home

If /home does not reside on a separate partition, it is excluded to avoid data loss on rollbacks.

/opt

Third-party products usually get installed to /opt. It is excluded to avoid uninstalling these applications on rollbacks.

/srv

Contains data for Web and FTP servers. It is excluded to avoid data loss on rollbacks.

/tmp

All directories containing temporary files and caches are excluded from snapshots.

/usr/local

This directory is used when manually installing software. It is excluded to avoid uninstalling these installations on rollbacks.

/var

This directory contains many variable files, including logs, temporary caches, third party products in /var/opt, and is the default location for virtual machine images and databases. Therefore this subvolume is created to exclude all of this variable data from snapshots and has Copy-On-Write disabled.

3.1.4 Customizing the setup Edit source

openSUSE Leap comes with a reasonable default setup, which should be sufficient for most use cases. However, all aspects of taking automatic snapshots and snapshot keeping can be configured according to your needs.

3.1.4.1 Disabling/enabling snapshots Edit source

Each of the three snapshot types (timeline, installation, administration) can be enabled or disabled independently.

Disabling/enabling timeline snapshots

Enabling.  snapper -c root set-config "TIMELINE_CREATE=yes"

Disabling.  snapper -c root set-config "TIMELINE_CREATE=no"

Using the YaST OS installation method (default), timeline snapshots are enabled, except for the root file system.

Disabling/enabling installation snapshots

Enabling:  Install the package snapper-zypp-plugin

Disabling:  Uninstall the package snapper-zypp-plugin

Installation snapshots are enabled by default.

Disabling/enabling administration snapshots

Enabling:  Set USE_SNAPPER to yes in /etc/sysconfig/yast2.

Disabling:  Set USE_SNAPPER to no in /etc/sysconfig/yast2.

Administration snapshots are enabled by default.

3.1.4.2 Controlling installation snapshots Edit source

Taking snapshot pairs upon installing packages with YaST or Zypper is handled by the snapper-zypp-plugin. An XML configuration file, /etc/snapper/zypp-plugin.conf defines, when to make snapshots. By default the file looks like the following:

 1 <?xml version="1.0" encoding="utf-8"?>
 2 <snapper-zypp-plugin-conf>
 3  <solvables>
 4   <solvable match="w"1 important="true"2>kernel-*3</solvable>
 5   <solvable match="w" important="true">dracut</solvable>
 6   <solvable match="w" important="true">glibc</solvable>
 7   <solvable match="w" important="true">systemd*</solvable>
 8   <solvable match="w" important="true">udev</solvable>
 9   <solvable match="w">*</solvable>4
10  </solvables>
11 </snapper-zypp-plugin-conf>

1

The match attribute defines whether the pattern is a Unix shell-style wild card (w) or a Python regular expression (re).

2

If the given pattern matches and the corresponding package is marked as important (for example kernel packages), the snapshot will also be marked as important.

3

Pattern to match a package name. Based on the setting of the match attribute, special characters are either interpreted as shell wild cards or regular expressions. This pattern matches all package names starting with kernel-.

4

This line unconditionally matches all packages.

With this configuration snapshot, pairs are made whenever a package is installed (line 9). When the kernel, dracut, glibc, systemd, or udev packages marked as important are installed, the snapshot pair will also be marked as important (lines 4 to 8). All rules are evaluated.

To disable a rule, either delete it or deactivate it using XML comments. To prevent the system from making snapshot pairs for every package installation for example, comment line 9:

 1 <?xml version="1.0" encoding="utf-8"?>
 2 <snapper-zypp-plugin-conf>
 3  <solvables>
 4   <solvable match="w" important="true">kernel-*</solvable>
 5   <solvable match="w" important="true">dracut</solvable>
 6   <solvable match="w" important="true">glibc</solvable>
 7   <solvable match="w" important="true">systemd*</solvable>
 8   <solvable match="w" important="true">udev</solvable>
 9   <!-- <solvable match="w">*</solvable> -->
10  </solvables>
11 </snapper-zypp-plugin-conf>

3.1.4.3 Creating and mounting new subvolumes Edit source

Creating a new subvolume underneath the / hierarchy and permanently mounting it is supported. Such a subvolume will be excluded from snapshots. You need to make sure not to create it inside an existing snapshot, since you would not be able to delete snapshots anymore after a rollback.

openSUSE Leap is configured with the /@/ subvolume which serves as an independent root for permanent subvolumes such as /opt, /srv, /home and others. Any new subvolumes you create and permanently mount need to be created in this initial root file system.

To do so, run the following commands. In this example, a new subvolume /usr/important is created from /dev/sda2.

> sudo mount /dev/sda2 -o subvol=@ /mnt
> sudo btrfs subvolume create /mnt/usr/important
> sudo umount /mnt

The corresponding entry in /etc/fstab needs to look like the following:

/dev/sda2 /usr/important btrfs subvol=@/usr/important 0 0
Tip
Tip: Disable copy-on-write (cow)

A subvolume may contain files that constantly change, such as virtualized disk images, database files, or log files. If so, consider disabling the copy-on-write feature for this volume, to avoid duplication of disk blocks. Use the nodatacow mount option in /etc/fstab to do so:

/dev/sda2 /usr/important btrfs nodatacow,subvol=@/usr/important 0 0

To alternatively disable copy-on-write for single files or directories, use the command chattr +C PATH.

3.1.4.4 Controlling snapshot archiving Edit source

Snapshots occupy disk space. To prevent disks from running out of space and thus causing system outages, old snapshots are automatically deleted. By default, up to ten important installation and administration snapshots and up to ten regular installation and administration snapshots are kept. If these snapshots occupy more than 50% of the root file system size, additional snapshots will be deleted. A minimum of four important and two regular snapshots are always kept.

Refer to Section 3.5.1, “Managing existing configurations” for instructions on how to change these values.

3.1.4.5 Using Snapper on thinly provisioned LVM volumes Edit source

Apart from snapshots on Btrfs file systems, Snapper also supports taking snapshots on thinly-provisioned LVM volumes (snapshots on regular LVM volumes are not supported) formatted with XFS, Ext4 or Ext3. For more information and setup instructions on LVM volumes, refer to Section 5.2, “LVM configuration”.

To use Snapper on a thinly-provisioned LVM volume you need to create a Snapper configuration for it. On LVM it is required to specify the file system with --fstype=lvm(FILESYSTEM). ext3, etx4 or xfs are valid values for FILESYSTEM. Example:

> sudo snapper -c lvm create-config --fstype="lvm(xfs)" /thin_lvm

You can adjust this configuration according to your needs as described in Section 3.5.1, “Managing existing configurations”.

3.2 Using Snapper to undo changes Edit source

Snapper on openSUSE Leap is preconfigured to serve as a tool that lets you undo changes made by zypper and YaST. For this purpose, Snapper is configured to create a pair of snapshots before and after each run of zypper and YaST. Snapper also lets you restore system files that have been accidentally deleted or modified. Timeline snapshots for the root partition need to be enabled for this purpose—see Section 3.1.4.1, “Disabling/enabling snapshots” for details.

By default, automatic snapshots as described above are configured for the root partition and its subvolumes. To make snapshots available for other partitions such as /home for example, you can create custom configurations.

Important
Important: Undoing changes compared to rollback

When working with snapshots to restore data, it is important to know that there are two fundamentally different scenarios Snapper can handle:

Undoing changes

When undoing changes as described in the following, two snapshots are being compared and the changes between these two snapshots are made undone. Using this method also allows to explicitly select the files that should be restored.

Rollback

When doing rollbacks as described in Section 3.3, “System rollback by booting from snapshots”, the system is reset to the state at which the snapshot was taken.

When undoing changes, it is also possible to compare a snapshot against the current system. When restoring all files from such a comparison, this will have the same result as doing a rollback. However, using the method described in Section 3.3, “System rollback by booting from snapshots” for rollbacks should be preferred, since it is faster and allows you to review the system before doing the rollback.

Warning
Warning: Data consistency

There is no mechanism to ensure data consistency when creating a snapshot. Whenever a file (for example, a database) is written at the same time as the snapshot is being created, it will result in a corrupted or partly written file. Restoring such a file will cause problems. Furthermore, certain system files such as /etc/mtab must never be restored. Therefore it is strongly recommended to always closely review the list of changed files and their diffs. Only restore files that really belong to the action you want to revert.

3.2.1 Undoing YaST and Zypper changes Edit source

If you set up the root partition with Btrfs during the installation, Snapper—preconfigured for doing rollbacks of YaST or Zypper changes—will automatically be installed. Every time you start a YaST module or a Zypper transaction, two snapshots are created: a pre-snapshot capturing the state of the file system before the start of the module and a post-snapshot after the module has been finished.

Using the YaST Snapper module or the snapper command line tool, you can undo the changes made by YaST/Zypper by restoring files from the pre-snapshot. Comparing two snapshots the tools also allow you to see which files have been changed. You can also display the differences between two versions of a file (diff).

Procedure 3.1: Undoing changes using the YaST Snapper module
  1. Start the Snapper module from the Miscellaneous section in YaST or by entering yast2 snapper.

  2. Make sure Current Configuration is set to root. This is always the case unless you have manually added own Snapper configurations.

  3. Choose a pair of pre- and post-snapshots from the list. Both, YaST and Zypper snapshot pairs are of the type Pre & Post. YaST snapshots are labeled as zypp(y2base) in the Description column; Zypper snapshots are labeled zypp(zypper).

  4. Click Show Changes to open the list of files that differ between the two snapshots.

  5. Review the list of files. To display a diff between the pre- and post-version of a file, select it from the list.

  6. To restore one or more files, select the relevant files or directories by activating the respective check box. Click Restore Selected and confirm the action by clicking Yes.

    To restore a single file, activate its diff view by clicking its name. Click Restore From First and confirm your choice with Yes.

Procedure 3.2: Undoing changes using the snapper command
  1. Get a list of YaST and Zypper snapshots by running snapper list -t pre-post. YaST snapshots are labeled as yast MODULE_NAME in the Description column; Zypper snapshots are labeled zypp(zypper).

    > sudo snapper list -t pre-post
    Pre # | Post # | Pre Date                      | Post Date                     | Description
    ------+--------+-------------------------------+-------------------------------+--------------
    311   | 312    | Tue 06 May 2018 14:05:46 CEST | Tue 06 May 2018 14:05:52 CEST | zypp(y2base)
    340   | 341    | Wed 07 May 2018 16:15:10 CEST | Wed 07 May 2018 16:15:16 CEST | zypp(zypper)
    342   | 343    | Wed 07 May 2018 16:20:38 CEST | Wed 07 May 2018 16:20:42 CEST | zypp(y2base)
    344   | 345    | Wed 07 May 2018 16:21:23 CEST | Wed 07 May 2018 16:21:24 CEST | zypp(zypper)
    346   | 347    | Wed 07 May 2018 16:41:06 CEST | Wed 07 May 2018 16:41:10 CEST | zypp(y2base)
    348   | 349    | Wed 07 May 2018 16:44:50 CEST | Wed 07 May 2018 16:44:53 CEST | zypp(y2base)
    350   | 351    | Wed 07 May 2018 16:46:27 CEST | Wed 07 May 2018 16:46:38 CEST | zypp(y2base)
  2. Get a list of changed files for a snapshot pair with snapper status PRE..POST. Files with content changes are marked with c, files that have been added are marked with + and deleted files are marked with -.

    > sudo snapper status 350..351
    +..... /usr/share/doc/packages/mikachan-fonts
    +..... /usr/share/doc/packages/mikachan-fonts/COPYING
    +..... /usr/share/doc/packages/mikachan-fonts/dl.html
    c..... /usr/share/fonts/truetype/fonts.dir
    c..... /usr/share/fonts/truetype/fonts.scale
    +..... /usr/share/fonts/truetype/みかちゃん-p.ttf
    +..... /usr/share/fonts/truetype/みかちゃん-pb.ttf
    +..... /usr/share/fonts/truetype/みかちゃん-ps.ttf
    +..... /usr/share/fonts/truetype/みかちゃん.ttf
    c..... /var/cache/fontconfig/7ef2298fde41cc6eeb7af42e48b7d293-x86_64.cache-4
    c..... /var/lib/rpm/Basenames
    c..... /var/lib/rpm/Dirnames
    c..... /var/lib/rpm/Group
    c..... /var/lib/rpm/Installtid
    c..... /var/lib/rpm/Name
    c..... /var/lib/rpm/Packages
    c..... /var/lib/rpm/Providename
    c..... /var/lib/rpm/Requirename
    c..... /var/lib/rpm/Sha1header
    c..... /var/lib/rpm/Sigmd5
  3. To display the diff for a certain file, run snapper diff PRE..POST FILENAME. If you do not specify FILENAME, a diff for all files will be displayed.

    > sudo snapper diff 350..351 /usr/share/fonts/truetype/fonts.scale
    --- /.snapshots/350/snapshot/usr/share/fonts/truetype/fonts.scale       2014-04-23 15:58:57.000000000 +0200
    +++ /.snapshots/351/snapshot/usr/share/fonts/truetype/fonts.scale       2014-05-07 16:46:31.000000000 +0200
    @@ -1,4 +1,4 @@
    -1174
    +1486
     ds=y:ai=0.2:luximr.ttf -b&h-luxi mono-bold-i-normal--0-0-0-0-c-0-iso10646-1
     ds=y:ai=0.2:luximr.ttf -b&h-luxi mono-bold-i-normal--0-0-0-0-c-0-iso8859-1
    [...]
  4. To restore one or more files run snapper -v undochange PRE..POST FILENAMES. If you do not specify a FILENAMES, all changed files will be restored.

    > sudo snapper -v undochange 350..351
         create:0 modify:13 delete:7
         undoing change...
         deleting /usr/share/doc/packages/mikachan-fonts
         deleting /usr/share/doc/packages/mikachan-fonts/COPYING
         deleting /usr/share/doc/packages/mikachan-fonts/dl.html
         deleting /usr/share/fonts/truetype/みかちゃん-p.ttf
         deleting /usr/share/fonts/truetype/みかちゃん-pb.ttf
         deleting /usr/share/fonts/truetype/みかちゃん-ps.ttf
         deleting /usr/share/fonts/truetype/みかちゃん.ttf
         modifying /usr/share/fonts/truetype/fonts.dir
         modifying /usr/share/fonts/truetype/fonts.scale
         modifying /var/cache/fontconfig/7ef2298fde41cc6eeb7af42e48b7d293-x86_64.cache-4
         modifying /var/lib/rpm/Basenames
         modifying /var/lib/rpm/Dirnames
         modifying /var/lib/rpm/Group
         modifying /var/lib/rpm/Installtid
         modifying /var/lib/rpm/Name
         modifying /var/lib/rpm/Packages
         modifying /var/lib/rpm/Providename
         modifying /var/lib/rpm/Requirename
         modifying /var/lib/rpm/Sha1header
         modifying /var/lib/rpm/Sigmd5
         undoing change done
Warning
Warning: Reverting user additions

Reverting user additions via undoing changes with Snapper is not recommended. Since certain directories are excluded from snapshots, files belonging to these users will remain in the file system. If a user with the same user ID as a deleted user is created, this user will inherit the files. Therefore it is strongly recommended to use the YaST User and Group Management tool to remove users.

3.2.2 Using Snapper to restore files Edit source

Apart from the installation and administration snapshots, Snapper creates timeline snapshots. You can use these backup snapshots to restore files that have accidentally been deleted or to restore a previous version of a file. By using Snapper's diff feature you can also find out which modifications have been made at a certain point of time.

Being able to restore files is especially interesting for data, which may reside on subvolumes or partitions for which snapshots are not taken by default. To be able to restore files from home directories, for example, create a separate Snapper configuration for /home doing automatic timeline snapshots. See Section 3.5, “Creating and modifying Snapper configurations” for instructions.

Warning
Warning: Restoring files compared to rollback

Snapshots taken from the root file system (defined by Snapper's root configuration), can be used to do a system rollback. The recommended way to do such a rollback is to boot from the snapshot and then perform the rollback. See Section 3.3, “System rollback by booting from snapshots” for details.

Performing a rollback would also be possible by restoring all files from a root file system snapshot as described below. However, this is not recommended. You may restore single files, for example a configuration file from the /etc directory, but not the complete list of files from the snapshot.

This restriction only affects snapshots taken from the root file system.

Procedure 3.3: Restoring files using the YaST Snapper module
  1. Start the Snapper module from the Miscellaneous section in YaST or by entering yast2 snapper.

  2. Choose the Current Configuration from which to choose a snapshot.

  3. Select a timeline snapshot from which to restore a file and choose Show Changes. Timeline snapshots are of the type Single with a description value of timeline.

  4. Select a file from the text box by clicking the file name. The difference between the snapshot version and the current system is shown. Activate the check box to select the file for restore. Do so for all files you want to restore.

  5. Click Restore Selected and confirm the action by clicking Yes.

Procedure 3.4: Restoring files using the snapper command
  1. Get a list of timeline snapshots for a specific configuration by running the following command:

    > sudo snapper -c CONFIG list -t single | grep timeline

    CONFIG needs to be replaced by an existing Snapper configuration. Use snapper list-configs to display a list.

  2. Get a list of changed files for a given snapshot by running the following command:

    > sudo snapper -c CONFIG status SNAPSHOT_ID..0

    Replace SNAPSHOT_ID by the ID for the snapshot from which you want to restore the files.

  3. Optionally list the differences between the current file version and the one from the snapshot by running

    > sudo snapper -c CONFIG diff SNAPSHOT_ID..0 FILE NAME

    If you do not specify <FILE NAME>, the difference for all files are shown.

  4. To restore one or more files, run

    > sudo snapper -c CONFIG -v undochange SNAPSHOT_ID..0 FILENAME1 FILENAME2

    If you do not specify file names, all changed files will be restored.

3.3 System rollback by booting from snapshots Edit source

The GRUB 2 version included on openSUSE Leap can boot from Btrfs snapshots. Together with Snapper's rollback feature, this allows to recover a misconfigured system. Only snapshots created for the default Snapper configuration (root) are bootable.

Important
Important: Supported configuration

As of openSUSE Leap 15.5 system rollbacks are only supported if the default subvolume configuration of the root partition has not been changed.

When booting a snapshot, the parts of the file system included in the snapshot are mounted read-only; all other file systems and parts that are excluded from snapshots are mounted read-write and can be modified.

Important
Important: Undoing changes compared to rollback

When working with snapshots to restore data, it is important to know that there are two fundamentally different scenarios Snapper can handle:

Undoing changes

When undoing changes as described in Section 3.2, “Using Snapper to undo changes”, two snapshots are compared and the changes between these two snapshots are reverted. Using this method also allows to explicitly exclude selected files from being restored.

Rollback

When doing rollbacks as described in the following, the system is reset to the state at which the snapshot was taken.

To do a rollback from a bootable snapshot, the following requirements must be met. When doing a default installation, the system is set up accordingly.

Requirements for a rollback from a bootable snapshot
  • The root file system needs to be Btrfs. Booting from LVM volume snapshots is not supported.

  • The root file system needs to be on a single device, a single partition and a single subvolume. Directories that are excluded from snapshots such as /srv (see Section 3.1.3, “Directories that are excluded from snapshots” for a full list) may reside on separate partitions.

  • The system needs to be bootable via the installed boot loader.

To perform a rollback from a bootable snapshot, do as follows:

  1. Boot the system. In the boot menu choose Bootable snapshots and select the snapshot you want to boot. The list of snapshots is listed by date—the most recent snapshot is listed first.

  2. Log in to the system. Carefully check whether everything works as expected. Note that you cannot write to any directory that is part of the snapshot. Data you write to other directories will not get lost, regardless of what you do next.

  3. Depending on whether you want to perform the rollback or not, choose your next step:

    1. If the system is in a state where you do not want to do a rollback, reboot to boot into the current system state. You can then choose a different snapshot, or start the rescue system.

    2. To perform the rollback, run

      > sudo snapper rollback

      and reboot afterward. On the boot screen, choose the default boot entry to reboot into the reinstated system. A snapshot of the file system status before the rollback is created. The default subvolume for root will be replaced with a fresh read-write snapshot. For details, see Section 3.3.1, “Snapshots after rollback”.

      It is useful to add a description for the snapshot with the -d option. For example:

      New file system root since rollback on DATE TIME
Tip
Tip: Rolling back to a specific installation state

If snapshots are not disabled during installation, an initial bootable snapshot is created at the end of the initial system installation. You can go back to that state at any time by booting this snapshot. The snapshot can be identified by the description after installation.

A bootable snapshot is also created when starting a system upgrade to a service pack or a new major release (provided snapshots are not disabled).

3.3.1 Snapshots after rollback Edit source

Before a rollback is performed, a snapshot of the running file system is created. The description references the ID of the snapshot that was restored in the rollback.

Snapshots created by rollbacks receive the value number for the Cleanup attribute. The rollback snapshots are therefore automatically deleted when the set number of snapshots is reached. Refer to Section 3.7, “Automatic snapshot clean-up” for details. If the snapshot contains important data, extract the data from the snapshot before it is removed.

3.3.1.1 Example of rollback snapshot Edit source

For example, after a fresh installation the following snapshots are available on the system:

# snapper --iso list
Type   | # |     | Cleanup | Description           | Userdata
-------+---+ ... +---------+-----------------------+--------------
single | 0 |     |         | current               |
single | 1 |     |         | first root filesystem |
single | 2 |     | number  | after installation    | important=yes

After running sudo snapper rollback snapshot 3 is created and contains the state of the system before the rollback was executed. Snapshot 4 is the new default Btrfs subvolume and thus the system after a reboot.

# snapper --iso list
Type   | # |     | Cleanup | Description           | Userdata
-------+---+ ... +---------+-----------------------+--------------
single | 0 |     |         | current               |
single | 1 |     | number  | first root filesystem |
single | 2 |     | number  | after installation    | important=yes
single | 3 |     | number  | rollback backup of #1 | important=yes
single | 4 |     |         |                       |

3.3.2 Accessing and identifying snapshot boot entries Edit source

To boot from a snapshot, reboot your machine and choose Start Bootloader from a read-only snapshot. A screen listing all bootable snapshots opens. The most recent snapshot is listed first, the oldest last. Use the keys and to navigate and press Enter to activate the selected snapshot. Activating a snapshot from the boot menu does not reboot the machine immediately, but rather opens the boot loader of the selected snapshot.

Boot loader: snapshots
Figure 3.1: Boot loader: snapshots
Warning
Warning: Booting Xen from a Btrfs snapshot using UEFI currently fails

Refer to https://www.suse.com/support/kb/doc/?id=000020602 for more details.

Each snapshot entry in the boot loader follows a naming scheme which makes it possible to identify it easily:

[*]1OS2 (KERNEL3,DATE4TTIME5,DESCRIPTION6)

1

If the snapshot was marked important, the entry is marked with a *.

2

Operating system label.

4

Date in the format YYYY-MM-DD.

5

Time in the format HH:MM.

6

This field contains a description of the snapshot. In case of a manually created snapshot this is the string created with the option --description or a custom string (see Tip: Setting a custom description for boot loader snapshot entries). In case of an automatically created snapshot, it is the tool that was called, for example zypp(zypper) or yast_sw_single. Long descriptions may be truncated, depending on the size of the boot screen.

Tip
Tip: Setting a custom description for boot loader snapshot entries

It is possible to replace the default string in the description field of a snapshot with a custom string. This is for example useful if an automatically created description is not sufficient, or a user-provided description is too long. To set a custom string STRING for snapshot NUMBER, use the following command:

> sudo snapper modify --userdata "bootloader=STRING" NUMBER

The description should be no longer than 25 characters—everything that exceeds this size will not be readable on the boot screen.

3.3.3 Limitations Edit source

A complete system rollback, restoring the complete system to the identical state as it was in when a snapshot was taken, is not possible.

3.3.3.1 Directories excluded from snapshots Edit source

Root file system snapshots do not contain all directories. See Section 3.1.3, “Directories that are excluded from snapshots” for details and reasons. As a general consequence, data from these directories is not restored, resulting in the following limitations.

Add-ons and third-party software may be unusable after a rollback

Applications and add-ons installing data in subvolumes excluded from the snapshot, such as /opt, may not work after a rollback, if others parts of the application data are also installed on subvolumes included in the snapshot. Re-install the application or the add-on to solve this problem.

File access problems

If an application had changed file permissions and/or ownership in between snapshot and current system, the application may not be able to access these files. Reset permissions and/or ownership for the affected files after the rollback.

Incompatible data formats

If a service or an application has established a new data format in between snapshot and current system, the application may not be able to read the affected data files after a rollback.

Subvolumes with a mixture of code and data

Subvolumes like /srv may contain a mixture of code and data. A rollback may result in non-functional code. A downgrade of the PHP version, for example, may result in broken PHP scripts for the Web server.

User data

If a rollback removes users from the system, data that is owned by these users in directories excluded from the snapshot, is not removed. If a user with the same user ID is created, this user will inherit the files. Use a tool like find to locate and remove orphaned files.

3.3.3.2 No rollback of boot loader data Edit source

A rollback of the boot loader is not possible, since all stages of the boot loader must fit together. This cannot be guaranteed when doing rollbacks of /boot.

3.4 Enabling Snapper in user home directories Edit source

You may enable snapshots for users' /home directories, which supports several use cases:

  • Individual users may manage their own snapshots and rollbacks.

  • System users, for example database, system, and network admins who want to track copies of configuration files, documentation, and so on.

  • Samba shares with home directories and Btrfs back-end.

Each user's directory is a Btrfs subvolume of /home. It is possible to set this up manually (see Section 3.4.3, “Manually enabling snapshots in home directories”). However, a more convenient way is to use pam_snapper. The pam_snapper package installs the pam_snapper.so module and helper scripts, which automate user creation and Snapper configuration.

pam_snapper provides integration with the useradd command, pluggable authentication modules (PAM), and Snapper. By default it creates snapshots at user login and logout, and also creates time-based snapshots as certain users remain logged in for extended periods of time. You may change the defaults using the normal Snapper commands and configuration files.

3.4.1 Installing pam_snapper and creating users Edit source

The easiest way is to start with a new /home directory formatted with Btrfs, and no existing users. Install pam_snapper:

# zypper in pam_snapper

Add this line to /etc/pam.d/common-session:

session optional pam_snapper.so

Use the /usr/lib/pam_snapper/pam_snapper_useradd.sh script to create a new user and home directory. By default the script performs a dry run. Edit the script to change DRYRUN=1 to DRYRUN=0. Now you can create a new user:

# /usr/lib/pam_snapper/pam_snapper_useradd.sh \
username group passwd=password
Create subvolume '/home/username'
useradd: warning: the home directory already exists.
Not copying any file from skel directory into it.

The files from /etc/skel will be copied into the user's home directory at their first login. Verify that the user's configuration was created by listing your Snapper configurations:

# snapper list --all
Config: home_username, subvolume: /home/username
Type   | # | Pre # | Date | User | Cleanup | Description | Userdata
-------+---+-------+------+------+---------+-------------+---------
single | 0 |       |      | root |         | current     |

Over time, this output will become populated with a list of snapshots, which the user can manage with the standard Snapper commands.

3.4.2 Removing users Edit source

Remove users with the /usr/lib/pam_snapper/pam_snapper_userdel.sh script. By default it performs a dry run, so edit it to change DRYRUN=1 to DRYRUN=0. This removes the user, the user's home subvolume, Snapper configuration, and deletes all snapshots.

# /usr/lib/pam_snapper/pam_snapper_userdel.sh username

3.4.3 Manually enabling snapshots in home directories Edit source

These are the steps for manually setting up users' home directories with Snapper. /home must be formatted with Btrfs, and the users not yet created.

# btrfs subvol create /home/username
# snapper -c home_username create-config /home/username
# sed -i -e "s/ALLOW_USERS=\"\"/ALLOW_USERS=\"username\"/g" \
/etc/snapper/configs/home_username
# yast users add username=username home=/home/username password=password
# chown username.group /home/username
# chmod 755 /home/username/.snapshots

3.5 Creating and modifying Snapper configurations Edit source

The way Snapper behaves is defined in a configuration file that is specific for each partition or Btrfs subvolume. These configuration files reside under /etc/snapper/configs/.

In case the root file system is big enough (approximately 12 GB), snapshots are automatically enabled for the root file system / upon installation. The corresponding default configuration is named root. It creates and manages the YaST and Zypper snapshot. See Section 3.5.1.1, “Configuration data” for a list of the default values.

Note
Note: Minimum root file system size for enabling snapshots

As explained in Section 3.1, “Default setup”, enabling snapshots requires additional free space in the root file system. The amount depends on the amount of packages installed and the amount of changes made to the volume that is included in snapshots. The snapshot frequency and the number of snapshots that get archived also matter.

There is a minimum root file system size that is required to automatically enable snapshots during the installation. Currently this size is approximately 12 GB. This value may change in the future, depending on architecture and the size of the base system. It depends on the values for the following tags in the file /control.xml from the installation media:

<root_base_size>
<btrfs_increase_percentage>

It is calculated with the following formula: ROOT_BASE_SIZE * (1 + BTRFS_INCREASE_PERCENTAGE/100)

Keep in mind that this value is a minimum size. Consider using more space for the root file system. As a rule of thumb, double the size you would use when not having enabled snapshots.

You may create your own configurations for other partitions formatted with Btrfs or existing subvolumes on a Btrfs partition. In the following example we will set up a Snapper configuration for backing up the Web server data residing on a separate, Btrfs-formatted partition mounted at /srv/www.

After a configuration has been created, you can either use snapper itself or the YaST Snapper module to restore files from these snapshots. In YaST you need to select your Current Configuration, while you need to specify your configuration for snapper with the global switch -c (for example, snapper -c myconfig list).

To create a new Snapper configuration, run snapper create-config:

> sudo snapper -c www-data1 create-config /srv/www2

1

Name of configuration file.

2

Mount point of the partition or Btrfs subvolume on which to take snapshots.

This command will create a new configuration file /etc/snapper/configs/www-data with reasonable default values (taken from /etc/snapper/config-templates/default). Refer to Section 3.5.1, “Managing existing configurations” for instructions on how to adjust these defaults.

Tip
Tip: Configuration defaults

Default values for a new configuration are taken from /etc/snapper/config-templates/default. To use your own set of defaults, create a copy of this file in the same directory and adjust it to your needs. To use it, specify the -t option with the create-config command:

> sudo snapper -c www-data create-config -t MY_DEFAULTS /srv/www

3.5.1 Managing existing configurations Edit source

The snapper command offers several subcommands for managing existing configurations. You can list, show, delete and modify them:

Listing configurations

Use the subcommand snapper list-configs to get all existing configurations:

> sudo snapper list-configs
Config | Subvolume
-------+----------
root   | /
usr    | /usr
local  | /local
Showing a configuration

Use the subcommand snapper -c CONFIG get-config to display the specified configuration. Replace CONFIG with one of the configuration names shown by snapper list-configs. For more information about the configuration options, see Section 3.5.1.1, “Configuration data”.

To display the default configuration, run:

> sudo snapper -c root get-config
Modifying a configuration

Use the subcommand snapper -c CONFIG set-config OPTION=VALUE to modify an option in the specified configuration. Replace CONFIG with one of the configuration names shown by snapper list-configs. Possible values for OPTION and VALUE are listed in Section 3.5.1.1, “Configuration data”.

Deleting a configuration

Use the subcommand snapper -c CONFIG delete-config to delete a configuration. Replace CONFIG with one of the configuration names shown by snapper list-configs.

3.5.1.1 Configuration data Edit source

Each configuration contains a list of options that can be modified from the command line. The following list provides details for each option. To change a value, run snapper -c CONFIG set-config "KEY=VALUE".

ALLOW_GROUPS, ALLOW_USERS

Granting permissions to use snapshots to regular users. See Section 3.5.1.2, “Using Snapper as regular user” for more information.

The default value is "".

BACKGROUND_COMPARISON

Defines whether pre and post snapshots should be compared in the background after creation.

The default value is "yes".

EMPTY_*

Defines the clean-up algorithm for snapshots pairs with identical pre and post snapshots. See Section 3.7.3, “Cleaning up snapshot pairs that do not differ” for details.

FSTYPE

File system type of the partition. Do not change.

The default value is "btrfs".

NUMBER_*

Defines the clean-up algorithm for installation and administration snapshots. See Section 3.7.1, “Cleaning up numbered snapshots” for details.

QGROUP / SPACE_LIMIT

Adds quota support to the clean-up algorithms. See Section 3.7.5, “Adding disk quota support” for details.

SUBVOLUME

Mount point of the partition or subvolume to snapshot. Do not change.

The default value is "/".

SYNC_ACL

If Snapper is used by regular users (see Section 3.5.1.2, “Using Snapper as regular user”), the users must be able to access the .snapshot directories and to read files within them. If SYNC_ACL is set to yes, Snapper automatically makes them accessible using ACLs for users and groups from the ALLOW_USERS or ALLOW_GROUPS entries.

The default value is "no".

TIMELINE_CREATE

If set to yes, hourly snapshots are created. Valid values: yes, no.

The default value is "no".

TIMELINE_CLEANUP / TIMELINE_LIMIT_*

Defines the clean-up algorithm for timeline snapshots. See Section 3.7.2, “Cleaning up timeline snapshots” for details.

3.5.1.2 Using Snapper as regular user Edit source

By default Snapper can only be used by root. However, there are cases in which certain groups or users need to be able to create snapshots or undo changes by reverting to a snapshot:

  • Web site administrators who want to take snapshots of /srv/www

  • Users who want to take a snapshot of their home directory

For these purposes, you can create Snapper configurations that grant permissions to users or/and groups. The corresponding .snapshots directory needs to be readable and accessible by the specified users. The easiest way to achieve this is to set the SYNC_ACL option to yes.

Procedure 3.5: Enabling regular users to use Snapper

All steps in this procedure need to be run by root.

  1. If a Snapper configuration does not exist yet, create one for the partition or subvolume on which the user should be able to use Snapper. Refer to Section 3.5, “Creating and modifying Snapper configurations” for instructions. Example:

    > sudo snapper --config web_data create /srv/www
  2. The configuration file is created under /etc/snapper/configs/CONFIG, where CONFIG is the value you specified with -c/--config in the previous step (for example /etc/snapper/configs/web_data). Adjust it according to your needs. For more information, see Section 3.5.1, “Managing existing configurations”.

  3. Set values for ALLOW_USERS and/or ALLOW_GROUPS to grant permissions to users and/or groups, respectively. Multiple entries need to be separated by Space. To grant permissions to the user www_admin for example, run:

    > sudo snapper -c web_data set-config "ALLOW_USERS=www_admin" SYNC_ACL="yes"
  4. The given Snapper configuration can now be used by the specified user(s) and/or group(s). You can test it with the list command, for example:

    www_admin:~ > snapper -c web_data list

3.6 Manually creating and managing snapshots Edit source

Snapper is not restricted to creating and managing snapshots automatically by configuration; you can also create snapshot pairs (before and after) or single snapshots manually using either the command-line tool or the YaST module.

All Snapper operations are carried out for an existing configuration (see Section 3.5, “Creating and modifying Snapper configurations” for details). You can only take snapshots of partitions or volumes for which a configuration exists. By default the system configuration (root) is used. To create or manage snapshots for your own configuration you need to explicitly choose it. Use the Current Configuration drop-down box in YaST or specify the -c on the command line (snapper -c MYCONFIG COMMAND).

3.6.1 Snapshot metadata Edit source

Each snapshot consists of the snapshot itself and certain metadata. When creating a snapshot you also need to specify the metadata. Modifying a snapshot means changing its metadata—you cannot modify its content. Use snapper list to show existing snapshots and their metadata:

snapper --config home list

Lists snapshots for the configuration home. To list snapshots for the default configuration (root), use snapper -c root list or snapper list.

snapper list -a

Lists snapshots for all existing configurations.

snapper list -t pre-post

Lists all pre and post snapshot pairs for the default (root) configuration.

snapper list -t single

Lists all snapshots of the type single for the default (root) configuration.

The following metadata is available for each snapshot:

  • Type: snapshot type, see Section 3.6.1.1, “Snapshot types” for details. This data cannot be changed.

  • Number: unique number of the snapshot. This data cannot be changed.

  • Pre Number: specifies the number of the corresponding pre snapshot. For snapshots of type post only. This data cannot be changed.

  • Description: a description of the snapshot.

  • Userdata: an extended description where you can specify custom data in the form of a comma-separated key=value list: reason=testing, project=foo. This field is also used to mark a snapshot as important (important=yes) and to list the user that created the snapshot (user=tux).

  • Cleanup-Algorithm: cleanup-algorithm for the snapshot, see Section 3.7, “Automatic snapshot clean-up” for details.

3.6.1.1 Snapshot types Edit source

Snapper knows three different types of snapshots: pre, post and single. Physically they do not differ, but Snapper handles them differently.

pre

Snapshot of a file system before a modification. Each pre snapshot corresponds to a post snapshot. For example, this is used for the automatic YaST/Zypper snapshots.

post

Snapshot of a file system after a modification. Each post snapshot corresponds to a pre snapshot. For example, this is used for the automatic YaST/Zypper snapshots.

single

Stand-alone snapshot. For example, this is used for the automatic hourly snapshots. This is the default type when creating snapshots.

3.6.1.2 Cleanup algorithms Edit source

Snapper provides three algorithms to clean up old snapshots. The algorithms are executed in a daily cron job. It is possible to define the number of different types of snapshots to keep in the Snapper configuration (see Section 3.5.1, “Managing existing configurations” for details).

number

Deletes old snapshots when a certain snapshot count is reached.

timeline

Deletes old snapshots having passed a certain age but keeps several hourly, daily, monthly and yearly snapshots.

empty-pre-post

Deletes pre/post snapshot pairs with empty diffs.

3.6.2 Creating snapshots Edit source

To create a snapshot, run snapper create or click Create in the YaST module Snapper. The following examples explain how to create snapshots from the command line. The YaST interface for Snapper is not explicitly described here but provides equivalent functionality.

Tip
Tip: Snapshot description

Always specify a meaningful description to later be able to identify its purpose. You can also specify additional information via the option --userdata.

snapper create --from 17 --description "with package2"

Creates a stand-alone snapshot (type single) from an existing snapshot, which is specified by the snapshot's number from snapper list. (This applies to Snapper version 0.8.4 and newer.)

snapper create --description "Snapshot for week 2 2014"

Creates a stand-alone snapshot (type single) for the default (root) configuration with a description. Because no cleanup-algorithm is specified, the snapshot will never be deleted automatically.

snapper --config home create --description "Cleanup in ~tux"

Creates a stand-alone snapshot (type single) for a custom configuration named home with a description. Because no cleanup-algorithm is specified, the snapshot will never be deleted automatically.

snapper --config home create --description "Daily data backup" --cleanup-algorithm timeline>

Creates a stand-alone snapshot (type single) for a custom configuration named home with a description. The snapshot will automatically be deleted when it meets the criteria specified for the timeline cleanup-algorithm in the configuration.

snapper create --type pre --print-number --description "Before the Apache config cleanup" --userdata "important=yes"

Creates a snapshot of the type pre and prints the snapshot number. First command needed to create a pair of snapshots used to save a before and after state. The snapshot is marked as important.

snapper create --type post --pre-number 30 --description "After the Apache config cleanup" --userdata "important=yes"

Creates a snapshot of the type post paired with the pre snapshot number 30. Second command needed to create a pair of snapshots used to save a before and after state. The snapshot is marked as important.

snapper create --command COMMAND --description "Before and after COMMAND"

Automatically creates a snapshot pair before and after running COMMAND. This option is only available when using snapper on the command line.

3.6.3 Modifying snapshot metadata Edit source

Snapper allows you to modify the description, the cleanup algorithm, and the user data of a snapshot. All other metadata cannot be changed. The following examples explain how to modify snapshots from the command line. It should be easy to adopt them when using the YaST interface.

To modify a snapshot on the command line, you need to know its number. Use snapper list to display all snapshots and their numbers.

The YaST Snapper module already lists all snapshots. Choose one from the list and click Modify.

snapper modify --cleanup-algorithm "timeline" 10

Modifies the metadata of snapshot 10 for the default (root) configuration. The cleanup algorithm is set to timeline.

snapper --config home modify --description "daily backup" -cleanup-algorithm "timeline" 120

Modifies the metadata of snapshot 120 for a custom configuration named home. A new description is set and the cleanup algorithm is unset.

3.6.4 Deleting snapshots Edit source

To delete a snapshot with the YaST Snapper module, choose a snapshot from the list and click Delete.

To delete a snapshot with the command-line tool, you need to know its number. Get it by running snapper list. To delete a snapshot, run snapper delete NUMBER.

Deleting the current default subvolume snapshot is not allowed.

When deleting snapshots with Snapper, the freed space will be claimed by a Btrfs process running in the background. Thus the visibility and the availability of free space is delayed. In case you need space freed by deleting a snapshot to be available immediately, use the option --sync with the delete command.

Tip
Tip: Deleting snapshot pairs

When deleting a pre snapshot, you should always delete its corresponding post snapshot (and vice versa).

snapper delete 65

Deletes snapshot 65 for the default (root) configuration.

snapper -c home delete 89 90

Deletes snapshots 89 and 90 for a custom configuration named home.

snapper delete --sync 23

Deletes snapshot 23 for the default (root) configuration and makes the freed space available immediately.

Tip
Tip: Delete unreferenced snapshots

Sometimes the Btrfs snapshot is present but the XML file containing the metadata for Snapper is missing. In this case the snapshot is not visible for Snapper and needs to be deleted manually:

btrfs subvolume delete /.snapshots/SNAPSHOTNUMBER/snapshot
rm -rf /.snapshots/SNAPSHOTNUMBER
Tip
Tip: Old snapshots occupy more disk space

If you delete snapshots to free space on your hard disk, make sure to delete old snapshots first. The older a snapshot is, the more disk space it occupies.

Snapshots are also automatically deleted by a daily cron job. Refer to Section 3.6.1.2, “Cleanup algorithms” for details.

3.7 Automatic snapshot clean-up Edit source

Snapshots occupy disk space and over time the amount of disk space occupied by the snapshots may become large. To prevent disks from running out of space, Snapper offers algorithms to automatically delete old snapshots. These algorithms differentiate between timeline snapshots and numbered snapshots (administration plus installation snapshot pairs). You can specify the number of snapshots to keep for each type.

Additionally, you can optionally specify a disk space quota, defining the maximum amount of disk space the snapshots may occupy. It is also possible to automatically delete pre and post snapshots pairs that do not differ.

A clean-up algorithm is always bound to a single Snapper configuration, so you need to configure algorithms for each configuration. To prevent certain snapshots from being automatically deleted, refer to Can a snapshot be protected from deletion? .

The default setup (root) is configured to do clean-up for numbered snapshots and empty pre and post snapshot pairs. Quota support is enabled—snapshots may not occupy more than 50% of the available disk space of the root partition. Timeline snapshots are disabled by default, therefore the timeline clean-up algorithm is also disabled.

3.7.1 Cleaning up numbered snapshots Edit source

Cleaning up numbered snapshots—administration plus installation snapshot pairs—is controlled by the following parameters of a Snapper configuration.

NUMBER_CLEANUP

Enables or disables clean-up of installation and admin snapshot pairs. If enabled, snapshot pairs are deleted when the total snapshot count exceeds a number specified with NUMBER_LIMIT and/or NUMBER_LIMIT_IMPORTANT and an age specified with NUMBER_MIN_AGE. Valid values: yes (enable), no (disable).

The default value is "yes".

Example command to change or set:

> sudo snapper -c CONFIG set-config "NUMBER_CLEANUP=no"
NUMBER_LIMIT / NUMBER_LIMIT_IMPORTANT

Defines how many regular and/or important installation and administration snapshot pairs to keep. Ignored if NUMBER_CLEANUP is set to "no".

The default value is "2-10" for NUMBER_LIMIT and "4-10" for NUMBER_LIMIT_IMPORTANT. The cleaning algorithms delete snapshots above the specified maximum value, without taking the snapshot and file system space into account. The algorithms also delete snapshots above the minimum value until the limits for the snapshot and file system are reached.

Example command to change or set:

> sudo snapper -c CONFIG set-config "NUMBER_LIMIT=10"
Important
Important: Ranged compared to constant values

In case quota support is enabled (see Section 3.7.5, “Adding disk quota support”) the limit needs to be specified as a minimum-maximum range, for example 2-10. If quota support is disabled, a constant value, for example 10, needs to be provided, otherwise cleaning-up will fail with an error.

NUMBER_MIN_AGE

Defines the minimum age in seconds a snapshot must have before it can automatically be deleted. Snapshots younger than the value specified here will not be deleted, regardless of how many exist.

The default value is "1800".

Example command to change or set:

> sudo snapper -c CONFIG set-config "NUMBER_MIN_AGE=864000"
Note
Note: Limit and age

NUMBER_LIMIT, NUMBER_LIMIT_IMPORTANT and NUMBER_MIN_AGE are always evaluated. Snapshots are only deleted when all conditions are met.

If you always want to keep the number of snapshots defined with NUMBER_LIMIT* regardless of their age, set NUMBER_MIN_AGE to 0.

The following example shows a configuration to keep the last 10 important and regular snapshots regardless of age:

NUMBER_CLEANUP=yes
NUMBER_LIMIT_IMPORTANT=10
NUMBER_LIMIT=10
NUMBER_MIN_AGE=0

If you do not want to keep snapshots beyond a certain age, set NUMBER_LIMIT* to 0 and provide the age with NUMBER_MIN_AGE.

The following example shows a configuration to only keep snapshots younger than ten days:

NUMBER_CLEANUP=yes
NUMBER_LIMIT_IMPORTANT=0
NUMBER_LIMIT=0
NUMBER_MIN_AGE=864000

3.7.2 Cleaning up timeline snapshots Edit source

Cleaning up timeline snapshots is controlled by the following parameters of a Snapper configuration.

TIMELINE_CLEANUP

Enables or disables clean-up of timeline snapshots. If enabled, snapshots are deleted when the total snapshot count exceeds a number specified with TIMELINE_LIMIT_* and an age specified with TIMELINE_MIN_AGE. Valid values: yes, no.

The default value is "yes".

Example command to change or set:

> sudo snapper -c CONFIG set-config "TIMELINE_CLEANUP=yes"
TIMELINE_LIMIT_DAILY, TIMELINE_LIMIT_HOURLY, TIMELINE_LIMIT_MONTHLY, TIMELINE_LIMIT_WEEKLY, TIMELINE_LIMIT_YEARLY

Number of snapshots to keep for hour, day, month, week and year.

The default value for each entry is "10", except for TIMELINE_LIMIT_WEEKLY, which is set to "0" by default.

TIMELINE_MIN_AGE

Defines the minimum age in seconds a snapshot must have before it can automatically be deleted.

The default value is "1800".

Example 3.1: Example timeline configuration
TIMELINE_CLEANUP="yes"
TIMELINE_CREATE="yes"
TIMELINE_LIMIT_DAILY="7"
TIMELINE_LIMIT_HOURLY="24"
TIMELINE_LIMIT_MONTHLY="12"
TIMELINE_LIMIT_WEEKLY="4"
TIMELINE_LIMIT_YEARLY="2"
TIMELINE_MIN_AGE="1800"

This example configuration enables hourly snapshots which are automatically cleaned up. TIMELINE_MIN_AGE and TIMELINE_LIMIT_* are always both evaluated. In this example, the minimum age of a snapshot before it can be deleted is set to 30 minutes (1800 seconds). Since we create hourly snapshots, this ensures that only the latest snapshots are kept. If TIMELINE_LIMIT_DAILY is set to not zero, this means that the first snapshot of the day is kept, too.

Snapshots to be kept
  • Hourly: the last 24 snapshots that have been made.

  • Daily: the first daily snapshot that has been made is kept from the last seven days.

  • Monthly: the first snapshot made on the last day of the month is kept for the last twelve months.

  • Weekly: the first snapshot made on the last day of the week is kept from the last four weeks.

  • Yearly: the first snapshot made on the last day of the year is kept for the last two years.

3.7.3 Cleaning up snapshot pairs that do not differ Edit source

As explained in Section 3.1.2, “Types of snapshots”, whenever you run a YaST module or execute Zypper, a pre snapshot is created on start-up and a post snapshot is created when exiting. In case you have not made any changes there will be no difference between the pre and post snapshots. Such empty snapshot pairs can be automatically be deleted by setting the following parameters in a Snapper configuration:

EMPTY_PRE_POST_CLEANUP

If set to yes, pre and post snapshot pairs that do not differ will be deleted.

The default value is "yes".

EMPTY_PRE_POST_MIN_AGE

Defines the minimum age in seconds a pre and post snapshot pair that does not differ must have before it can automatically be deleted.

The default value is "1800".

3.7.4 Cleaning up manually created snapshots Edit source

Snapper does not offer custom clean-up algorithms for manually created snapshots. However, you can assign the number or timeline clean-up algorithm to a manually created snapshot. If you do so, the snapshot will join the clean-up queue for the algorithm you specified. You can specify a clean-up algorithm when creating a snapshot, or by modifying an existing snapshot:

snapper create --description "Test" --cleanup-algorithm number

Creates a stand-alone snapshot (type single) for the default (root) configuration and assigns the number clean-up algorithm.

snapper modify --cleanup-algorithm "timeline" 25

Modifies the snapshot with the number 25 and assigns the clean-up algorithm timeline.

3.7.5 Adding disk quota support Edit source

In addition to the number and/or timeline clean-up algorithms described above, Snapper supports quotas. You can define what percentage of the available space snapshots are allowed to occupy. This percentage value always applies to the Btrfs subvolume defined in the respective Snapper configuration.

Btrfs quotas are applied to subvolumes, not to users. You may apply disk space quotas to users and groups (for example, with the quota command) in addition to using Btrfs quotas.

If Snapper was enabled during the installation, quota support is automatically enabled. In case you manually enable Snapper at a later point in time, you can enable quota support by running snapper setup-quota. This requires a valid configuration (see Section 3.5, “Creating and modifying Snapper configurations” for more information).

Quota support is controlled by the following parameters of a Snapper configuration.

QGROUP

The Btrfs quota group used by Snapper. If not set, run snapper setup-quota. If already set, only change if you are familiar with man 8 btrfs-qgroup. This value is set with snapper setup-quota and should not be changed.

SPACE_LIMIT

Limit of space snapshots are allowed to use in fractions of 1 (100%). Valid values range from 0 to 1 (0.1 = 10%, 0.2 = 20%, ...).

The following limitations and guidelines apply:

  • Quotas are only activated in addition to an existing number and/or timeline clean-up algorithm. If no clean-up algorithm is active, quota restrictions are not applied.

  • With quota support enabled, Snapper will perform two clean-up runs if required. The first run will apply the rules specified for number and timeline snapshots. Only if the quota is exceeded after this run, the quota-specific rules will be applied in a second run.

  • Even if quota support is enabled, Snapper will always keep the number of snapshots specified with the NUMBER_LIMIT* and TIMELINE_LIMIT* values, even if the quota will be exceeded. It is therefore recommended to specify ranged values (MIN-MAX) for NUMBER_LIMIT* and TIMELINE_LIMIT* to ensure the quota can be applied.

    If, for example, NUMBER_LIMIT=5-20 is set, Snapper will perform a first clean-up run and reduce the number of regular numbered snapshots to 20. In case these 20 snapshots exceed the quota, Snapper will delete the oldest ones in a second run until the quota is met. A minimum of five snapshots will always be kept, regardless of the amount of space they occupy.

3.8 Showing exclusive disk space used by snapshots Edit source

Snapshots share data, for efficient use of storage space, so using ordinary commands like du and df will not measure used disk space accurately. When you want to free up disk space on Btrfs with quotas enabled, you need to know how much exclusive disk space is used by each snapshot, rather than shared space. Snapper 0.6 and up reports the used disk space for each snapshot in the Used Space column:

# snapper--iso list
  # | Type   | Pre # | Date                | User | Used Space | Cleanup | Description           | Userdata     
----+--------+-------+---------------------+------+------------+---------+-----------------------+--------------
 0  | single |       |                     | root |            |         | current               |              
 1* | single |       | 2019-07-22 13:08:38 | root |  16.00 KiB |         | first root filesystem |              
 2  | single |       | 2019-07-22 14:21:05 | root |  14.23 MiB | number  | after installation    | important=yes
 3  | pre    |       | 2019-07-22 14:26:03 | root | 144.00 KiB | number  | zypp(zypper)          | important=no 
 4  | post   |     3 | 2019-07-22 14:26:04 | root | 112.00 KiB | number  |                       | important=no 
 5  | pre    |       | 2019-07-23 08:19:36 | root | 128.00 KiB | number  | zypp(zypper)          | important=no 
 6  | post   |     5 | 2019-07-23 08:19:43 | root |  80.00 KiB | number  |                       | important=no 
 7  | pre    |       | 2019-07-23 08:20:50 | root | 256.00 KiB | number  | yast sw_single        |              
 8  | pre    |       | 2019-07-23 08:23:22 | root | 112.00 KiB | number  | zypp(ruby.ruby2.5)    | important=no 
 9  | post   |     8 | 2019-07-23 08:23:35 | root |  64.00 KiB | number  |                       | important=no 
10  | post   |     7 | 2019-07-23 08:24:05 | root |  16.00 KiB | number  |                       |

The btrfs command provides another view of space used by snapshots:

# btrfs qgroup show -p /
qgroupid         rfer         excl parent  
--------         ----         ---- ------  
0/5          16.00KiB     16.00KiB ---     
[...]    
0/272         3.09GiB     14.23MiB 1/0     
0/273         3.11GiB    144.00KiB 1/0     
0/274         3.11GiB    112.00KiB 1/0     
0/275         3.11GiB    128.00KiB 1/0     
0/276         3.11GiB     80.00KiB 1/0     
0/277         3.11GiB    256.00KiB 1/0     
0/278         3.11GiB    112.00KiB 1/0     
0/279         3.12GiB     64.00KiB 1/0     
0/280         3.12GiB     16.00KiB 1/0     
1/0           3.33GiB    222.95MiB ---

The qgroupid column displays the identification number for each subvolume, assigning a qgroup level/ID combination.

The rfer column displays the total amount of data referred to in the subvolume.

The excl column displays the exclusive data in each subvolume.

The parent column shows the parent qgroup of the subvolumes.

The final item, 1/0, shows the totals for the parent qgroup. In the above example, 222.95 MiB will be freed if all subvolumes are removed. Run the following command to see which snapshots are associated with each subvolume:

# btrfs subvolume list -st /
ID	gen	top level	path	
--	---	---------	----	
267	298	266		@/.snapshots/1/snapshot
272	159	266		@/.snapshots/2/snapshot
273	170	266		@/.snapshots/3/snapshot
274	171	266		@/.snapshots/4/snapshot
275	287	266		@/.snapshots/5/snapshot
276	288	266		@/.snapshots/6/snapshot
277	292	266		@/.snapshots/7/snapshot
278	296	266		@/.snapshots/8/snapshot
279	297	266		@/.snapshots/9/snapshot
280	298	266		@/.snapshots/10/snapshot

Doing an upgrade from one service pack to another results in snapshots occupying a lot of disk space on the system subvolumes. Manually deleting these snapshots after they are no longer needed is recommended. See Section 3.6.4, “Deleting snapshots” for details.

3.9 Frequently asked questions Edit source

Q: Why does Snapper never show changes in /var/log, /tmp and other directories?

For certain directories, we decided to exclude them from snapshots. See Section 3.1.3, “Directories that are excluded from snapshots” for a list and reasons. To exclude a path from snapshots we create a subvolume for that path.

Q: Can I boot a snapshot from the boot loader?

Yes—refer to Section 3.3, “System rollback by booting from snapshots” for details.

Q: Can a snapshot be protected from deletion?

Currently Snapper does not offer means to prevent a snapshot from being deleted manually. However, you can prevent snapshots from being automatically deleted by clean-up algorithms. Manually created snapshots (see Section 3.6.2, “Creating snapshots”) have no clean-up algorithm assigned unless you specify one with --cleanup-algorithm. Automatically created snapshots always either have the number or timeline algorithm assigned. To remove such an assignment from one or more snapshots, proceed as follows:

  1. List all available snapshots:

    > sudo snapper list -a
  2. Memorize the number of the snapshots you want to prevent from being deleted.

  3. Run the following command and replace the number placeholders with the number(s) you memorized:

    > sudo snapper modify --cleanup-algorithm "" #1 #2 #n
  4. Check the result by running snapper list -a again. The entry in the column Cleanup should now be empty for the snapshots you modified.

Q: Where can I get more information on Snapper?

See the Snapper home page at http://snapper.io/.

4 Remote graphical sessions with VNC Edit source

Abstract

Virtual Network Computing (VNC) enables you to access a remote computer via a graphical desktop, and run remote graphical applications. VNC is platform-independent and accesses the remote machine from any operating system. This chapter describes how to connect to a VNC server with the desktop clients vncviewer and Remmina, and how to operate a VNC server.

openSUSE Leap supports two different kinds of VNC sessions: one-time sessions that live While the VNC connection from the client is kept up, and persistent sessions that live until they are explicitly terminated.

A VNC server can offer both kinds of sessions simultaneously on different ports, but an open session cannot be converted from one type to the other.

4.1 The vncviewer client Edit source

Important
Important: Supported display managers

A machine can reliably accept VNC connections only if it uses a display manager that supports the XDMCP protocol. While gdm, lxdm, or lightdm support XDMCP, the KDE 5 default display manager sddm does not support it. When changing the default display manager, remember to log out of the current X session and restart the display manager with

> sudo systemctl restart xdm.service

To connect to a VNC service provided by a server, a client is needed. The default in openSUSE Leap is vncviewer, provided by the tigervnc package.

4.1.1 Connecting using the vncviewer CLI Edit source

To start your VNC viewer and initiate a session with the server, use the command:

> vncviewer jupiter.example.com:1

Instead of the VNC display number you can also specify the port number with two colons:

> vncviewer jupiter.example.com::5901
Note
Note: Display and port number

The actual display or port number you specify in the VNC client must be the same as the display or port number picked by the vncserver command on the target machine. See Section 4.4, “Configuring persistent VNC server sessions” for further info.

4.1.2 Connecting using the vncviewer GUI Edit source

By running vncviewer without specifying --listen or a host to connect to, it will show a window to ask for connection details. Enter the host into the VNC server field like in Section 4.1.1, “Connecting using the vncviewer CLI” and click Connect.

vncviewer asking for connection details
Figure 4.1: vncviewer

4.1.3 Notification of unencrypted connections Edit source

The VNC protocol supports different kinds of encrypted connections, not to be confused with password authentication. If a connection does not use TLS, the text (Connection not encrypted!) can be seen in the window title of the VNC viewer.

4.2 Remmina: the remote desktop client Edit source

Remmina is a modern and feature rich remote desktop client. It supports several access methods, for example VNC, SSH, RDP and Spice.

4.2.1 Installation Edit source

To use Remmina, verify whether the remmina package is installed on your system, and install it if not. Remember to install the VNC plug-in for Remmina as well:

# zypper in remmina remmina-plugin-vnc

4.2.2 Main window Edit source

Run Remmina by entering the remmina command.

Remmina's main window
Figure 4.2: Remmina's main window

The main application window shows the list of stored remote sessions. Here you can add and save a new remote session, quick-start a new session without saving it, start a previously saved session, or set Remmina's global preferences.

4.2.3 Adding remote sessions Edit source

To add and save a new remote session, click Add new session in the top left of the main window. The Remote Desktop Preference window opens.

Remote desktop preference
Figure 4.3: Remote desktop preference

Complete the fields that specify your newly added remote session profile. The most important are:

Name

Name of the profile. It will be listed in the main window.

Protocol

The protocol to use when connecting to the remote session, for example VNC.

Server

The IP or DNS address and display number of the remote server.

User name, password

Credentials to use for remote authentication. Leave empty for no authentication.

Color depth, quality

Select the best options according to your connection speed and quality.

Select the Advanced tab to enter more specific settings.

Tip
Tip: Disable encryption

If the communication between the client and the remote server is not encrypted, activate Disable encryption, otherwise the connection fails.

Select the SSH tab for advanced SSH tunneling and authentication options.

Confirm with Save. Your new profile will be listed in the main window.

4.2.4 Starting remote sessions Edit source

You can either start a previously saved session, or quick-start a remote session without saving the connection details.

4.2.4.1 Quick-starting remote sessions Edit source

To start a remote session quickly without adding and saving connection details, use the drop-down box and text box at the top of the main window.

Quick-starting
Figure 4.4: Quick-starting

Select the communication protocol from the drop-down box, for example VNC, then enter the VNC server DNS or IP address followed by a colon and a display number, and confirm with Enter.

4.2.4.2 Opening saved remote sessions Edit source

To open a specific remote session, double-click it from the list of sessions.

4.2.4.3 Remote sessions window Edit source

Remote sessions are opened in tabs of a separate window. Each tab hosts one session. The toolbar on the left of the window helps you manage the windows/sessions. For example, toggle full-screen mode, resize the window to match the display size of the session, send specific keystrokes to the session, take screenshots of the session, or set the image quality.

Remmina viewing remote session
Figure 4.5: Remmina viewing remote session

4.2.5 Editing, copying, and deleting saved sessions Edit source

To edit a saved remote session, right-click its name in Remmina's main window and select Edit. Refer to Section 4.2.3, “Adding remote sessions” for the description of the relevant fields.

To copy a saved remote session, right-click its name in Remmina's main window and select Copy. In the Remote Desktop Preference window, change the name of the profile, optionally adjust relevant options, and confirm with Save.

To Delete a saved remote session, right-click its name in Remmina's main window and select Delete. Confirm with Yes in the next dialog.

4.2.6 Running remote sessions from the command line Edit source

If you need to open a remote session from the command line or from a batch file without first opening the main application window, use the following syntax:

 > remmina -c profile_name.remmina

Remmina's profile files are stored in the .local/share/remmina/ directory in your home directory. To determine which profile file belongs to the session you want to open, run Remmina, click the session name in the main window, and read the path to the profile file in the window's status line at the bottom.

Reading path to the profile file
Figure 4.6: Reading path to the profile file

While Remmina is not running, you can rename the profile file to a more reasonable file name, such as sle15.remmina. You can even copy the profile file to your custom directory and run it using the remmina -c command from there.

4.3 Configuring one-time sessions on the VNC server Edit source

A one-time session is initiated by the remote client. It starts a graphical login screen on the server. This way you can choose the user which starts the session and, if supported by the login manager, the desktop environment. When you cancel the client connection to such a VNC session, all applications started within that session will be terminated, too. One-time VNC sessions cannot be shared, but it is possible to have multiple sessions on a single host at the same time.

Procedure 4.1: Enabling one-time VNC sessions
  1. Start YaST › Network Services › Remote Administration (VNC).

  2. Check Allow Remote Administration Without Session Management.

  3. Activate Enable access using a web browser if you plan to access the VNC session in a Web browser window.

  4. If necessary, also check Open Port in Firewall (for example, when your network interface is configured to be in the External Zone). If you have more than one network interface, restrict opening the firewall ports to a specific interface via Firewall Details.

  5. Confirm your settings with Next.

  6. In case not all needed packages are available yet, you need to approve the installation of missing packages.

    Tip
    Tip: Restart the display manager

    YaST makes changes to the display manager settings. You need to log out of your current graphical session and restart the display manager for the changes to take effect.

Remote administration
Figure 4.7: Remote administration

4.3.1 Available configurations Edit source

The default configuration on openSUSE Leap serves sessions with a resolution of 1024x768 pixels at a color depth of 16-bit. The sessions are available on ports 5901 for regular VNC viewers (equivalent to VNC display 1) and on port 5801 for Web browsers.

Other configurations can be made available on different ports, see Section 4.3.3, “Configuring one-time VNC sessions”.

VNC display numbers and X display numbers are independent in one-time sessions. A VNC display number is manually assigned to every configuration that the server supports (:1 in the example above). Whenever a VNC session is initiated with one of the configurations, it automatically gets a free X display number.

By default, both the VNC client and server try to communicate securely via a self-signed SSL certificate, which is generated after installation. You can either use the default one, or replace it with your own. When using the self-signed certificate, you need to confirm its signature before the first connection—both in the VNC viewer and the Web browser.

Tip
Tip

Some VNC clients refuse to establish a secure connection via the default self-signed certificate. For example, the Vinagre client verifies the certification against the GnuTLS global trust store and fails if the certificate is self-signed. In such a case, either use an encryption method other than x509, or generate a properly signed certificate for the VNC server and import it to the client's system trust store.

4.3.2 Initiating a one-time VNC session Edit source

To connect to a one-time VNC session, a VNC viewer must be installed, see also Section 4.1, “The vncviewer client”. Alternatively use a JavaScript-capable Web browser to view the VNC session by entering the following URL: http://jupiter.example.com:5801

4.3.3 Configuring one-time VNC sessions Edit source

You can skip this section, if you do not need or want to modify the default configuration.

One-time VNC sessions are started via the systemd socket xvnc.socket. By default it offers six configuration blocks: three for VNC viewers (vnc1 to vnc3), and three serving a JavaScript client (vnchttpd1 to vnchttpd3). By default only vnc1 and vnchttpd1 are active.

To activate the VNC server socket at boot time, run the following command:

> sudo  systemctl enable xvnc.socket

To start the socket immediately, run:

> sudo  systemctl start xvnc.socket

The Xvnc server can be configured via the server_args option. For a list of options, see Xvnc --help.

When adding custom configurations, make sure they are not using ports that are already in use by other configurations, other services, or existing persistent VNC sessions on the same host.

Activate configuration changes by entering the following command:

> sudo systemctl reload xvnc.socket
Important
Important: Firewall and VNC ports

When activating Remote Administration as described in Procedure 4.1, “Enabling one-time VNC sessions”, the ports 5801 and 5901 are opened in the firewall. If the network interface serving the VNC sessions is protected by a firewall, you need to manually open the respective ports when activating additional ports for VNC sessions. See Book “Security and Hardening Guide”, Chapter 23 “Masquerading and firewalls” for instructions.

4.4 Configuring persistent VNC server sessions Edit source

A persistent session can be accessed from multiple clients simultaneously. This is ideal for demonstration purposes where one client has full access and all other clients have view-only access. Another use case are training sessions where the trainer may need access to the trainee's desktop.

Tip
Tip: Connecting to a persistent VNC session

To connect to a persistent VNC session, a VNC viewer must be installed. Refer to Section 4.1, “The vncviewer client” for more details. Alternatively use a JavaScript-capable Web browser to view the VNC session by entering the following URL: http://jupiter.example.com:5801

There are two types of persistent VNC sessions:

4.4.1 VNC session initiated using vncserver Edit source

This type of persistent VNC session is initiated on the server. The session and all applications started in this session run regardless of client connections until the session is terminated. Access to persistent sessions is protected by two possible types of passwords:

  • a regular password that grants full access or

  • an optional view-only password that grants a non-interactive (view-only) access.

A session can have multiple client connections of both kinds at once.

Procedure 4.2: Starting a persistent VNC session using vncserver
  1. Open a shell and make sure you are logged in as the user that should own the VNC session.

  2. If the network interface serving the VNC sessions is protected by a firewall, you need to manually open the port used by your session in the firewall. If starting multiple sessions you may alternatively open a range of ports. See Book “Security and Hardening Guide”, Chapter 23 “Masquerading and firewalls” for details on how to configure the firewall.

    vncserver uses the ports 5901 for display :1, 5902 for display :2, and so on. For persistent sessions, the VNC display and the X display normally have the same number.

  3. To start a session with a resolution of 1024x768 pixel and with a color depth of 16-bit, enter the following command:

    vncserver -alwaysshared -geometry 1024x768 -depth 16

    The vncserver command picks an unused display number when none is given and prints its choice. See man 1 vncserver for more options.

When running vncserver for the first time, it asks for a password for full access to the session. If needed, you can also provide a password for view-only access to the session.

The passwords you are providing here are also used for future sessions started by the same user. They can be changed with the vncpasswd command.

Important
Important: Security considerations

Make sure to use strong passwords of significant length (eight or more characters). Do not share these passwords.

To cancel the session shut down the desktop environment that runs inside the VNC session from the VNC viewer as you would shut it down if it was a regular local X session.

If you prefer to manually cancel a session, open a shell on the VNC server and make sure you are logged in as the user that owns the VNC session you want to cancel. Run the following command to cancel the session that runs on display :1: vncserver -kill :1

4.4.1.1 Configuring persistent VNC sessions Edit source

Persistent VNC sessions can be configured by editing $HOME/.vnc/xstartup. By default this shell script starts the same GUI/window manager it was started from. In openSUSE Leap this will either be GNOME or IceWM. To start your session with a window manager of your choice, set the variable WINDOWMANAGER:

WINDOWMANAGER=gnome vncserver -geometry 1024x768
WINDOWMANAGER=icewm vncserver -geometry 1024x768
Note
Note: One configuration for each user

Persistent VNC sessions are configured in a single per-user configuration. Multiple sessions started by the same user will all use the same start-up and password files.

4.4.2 VNC session initiated using vncmanager Edit source

Procedure 4.3: Enabling persistent VNC sessions
  1. Start YaST › Network Services › Remote Administration (VNC).

  2. Activate Allow Remote Administration With Session Management.

  3. Activate Enable access using a web browser if you plan to access the VNC session in a Web browser window.

  4. If necessary, also check Open Port in Firewall (for example, when your network interface is configured to be in the External Zone). If you have more than one network interface, restrict opening the firewall ports to a specific interface via Firewall Details.

  5. Confirm your settings with Next.

  6. In case not all needed packages are available yet, you need to approve the installation of missing packages.

    Tip
    Tip: Restart the display manager

    YaST makes changes to the display manager settings. You need to log out of your current graphical session and restart the display manager for the changes to take effect.

4.4.2.1 Configuring persistent VNC sessions Edit source

After you enable the VNC session management as described in Procedure 4.3, “Enabling persistent VNC sessions”, you can normally connect to the remote session with your favorite VNC viewer, such as vncviewer or Remmina. You will be presented with the login screen. After you log in, the 'VNC' icon will appear in the system tray of your desktop environment. Click the icon to open the VNC Session window. If it does not appear or if your desktop environment does not support icons in the system tray, run vncmanager-controller manually.

VNC session settings
Figure 4.8: VNC session settings

There are several settings that influence the VNC session's behavior:

Non-persistent, private

This is equivalent to a one-time session. It is not visible to others and will be terminated after you disconnect from it. Refer to Section 4.3, “Configuring one-time sessions on the VNC server” for more information.

Persistent, visible

The session is visible to other users and keeps running even after you disconnect from it.

Session name

Here you can specify the name of the persistent session so that it is easily identified when reconnecting.

No password required

The session will be freely accessible without having to log in under user credentials.

Require user login

You need to log in with a valid user name and password to access the session. Lists the valid user names in the Allowed users text box.

Allow one client at a time

Prevents multiple users from joining the session at the same time.

Allow multiple clients at a time

Allows multiple users to join the persistent session at the same time. Useful for remote presentations or training sessions.

Confirm with OK.

4.4.2.2 Joining persistent VNC sessions Edit source

After you set up a persistent VNC session as described in Section 4.4.2.1, “Configuring persistent VNC sessions”, you can join it with your VNC viewer. After your VNC client connects to the server, you will be prompted to choose whether you want to create a new session, or join the existing one:

Joining a persistent VNC session
Figure 4.9: Joining a persistent VNC session

After you click the name of the existing session, you may be asked for login credentials, depending on the persistent session settings.

4.5 Configuring encryption on the VNC server Edit source

If the VNC server is set up properly, all communication between the VNC server and the client is encrypted. The authentication happens at the beginning of the session; the actual data transfer only begins afterward.

Whether for a one-time or a persistent VNC session, security options are configured via the -securitytypes parameter of the /usr/bin/Xvnc command located on the server_args line. The -securitytypes parameter selects both authentication method and encryption. It has the following options:

Authentications
None, TLSNone, x509None

No authentication.

VncAuth, TLSVnc, x509Vnc

Authentication using custom password.

Plain, TLSPlain, x509Plain

Authentication using PAM to verify user's password.

Encryptions
None, vncAuth, plain

No encryption.

TLSNone, TLSVnc, TLSPlain

Anonymous TLS encryption. Everything is encrypted, but there is no verification of the remote host. So you are protected against passive attackers, but not against man-in-the-middle attackers.

X509None, x509Vnc, x509Plain

TLS encryption with certificate. If you use a self-signed certificate, you will be asked to verify it on the first connection. On subsequent connections you will be warned only if the certificate changed. So you are protected against everything except man-in-the-middle on the first connection (similar to typical SSH usage). If you use a certificate signed by a certificate authority matching the machine name, then you get full security (similar to typical HTTPS usage).

Tip
Tip

Some VNC clients refuse to establish a secure connection via the default self-signed certificate. For example, the Vinagre client verifies the certification against the GnuTLS global trust store and fails if the certificate is self-signed. In such a case, either use an encryption method other than x509, or generate a properly signed certificate for the VNC server and import it to the client's system trust store.

Tip
Tip: Path to certificate and key

With X509 based encryption, you need to specify the path to the X509 certificate and the key with -X509Cert and -X509Key options.

If you select multiple security types separated by comma, the first one supported and allowed by both client and server will be used. That way you can configure opportunistic encryption on the server. This is useful if you need to support VNC clients that do not support encryption.

On the client, you can also specify the allowed security types to prevent a downgrade attack if you are connecting to a server which you know has encryption enabled (although our vncviewer will warn you with the "Connection not encrypted!" message in that case).

4.6 Compatibility with Wayland Edit source

The Remote Administration (VNC) feature relies on X11 and may result in an empty screen if Wayland is enabled. The display manager must be configured to use X11 instead of Wayland. For gdm, edit /etc/gdm/custom.conf. In the [daemon] section, add WaylandEnable=false to the configuration file. When logging in, the user must choose an X11-compatible session as well. If you wish to remove the Wayland option for GNOME, you can remove and lock the gnome-session-wayland package.

5 Expert Partitioner Edit source

Sophisticated system configurations require specific disk setups. You can perform all common partitioning tasks during the installation.

To get persistent device naming with block devices, use the block devices below /dev/disk/by-id or /dev/disk/by-uuid.

Logical Volume Management (LVM) is a disk partitioning scheme that is designed to be much more flexible than the physical partitioning used in standard setups. Its snapshot functionality enables easy creation of data backups. Redundant Array of Independent Disks (RAID) offers increased data integrity, performance, and fault tolerance. openSUSE Leap also supports multipath I/O . There is also the option to use iSCSI as a networked disk.

Warning
Warning: Disk space units

Note that for partitioning purposes, disk space is measured in binary units, rather than in decimal units. For example, if you enter sizes of 1GB, 1GiB or 1G, they all signify 1 GiB (Gibibyte), as opposed to 1 GB (Gigabyte).

Binary

1 GiB = 1 073 741 824 bytes.

Decimal

1 GB = 1 000 000 000 bytes.

Difference

1 GiB ≈ 1.07 GB.

5.1 Using the Expert Partitioner Edit source

Using the Expert Partitioner (Figure 5.1, “The YaST partitioner”), you can add, delete, resize, and edit partitions, as well as access the soft RAID, and LVM configuration.

Warning
Warning: Repartitioning the running system

Although it is possible to repartition your system while it is running, the risk of making a mistake that causes data loss is very high. Try to avoid repartitioning your installed system and always create a complete backup of your data before attempting to do so.

The YaST partitioner
Figure 5.1: The YaST partitioner

All existing or suggested partitions on all connected hard disks are displayed in the list of Available Storage in the YaST Expert Partitioner dialog. Entire hard disks are listed as devices without numbers, such as /dev/sda. Partitions are listed as parts of these devices, such as /dev/sda1. The size, type, encryption status, file system, and mount point of the hard disks and their partitions are also displayed. The mount point describes where the partition appears in the Linux file system tree.

Several functional views are available on the left hand System View. These views can be used to collect information about existing storage configurations, configure functions (like RAID, Volume Management, Crypt Files), and view file systems with additional features, such as Btrfs, NFS, or TMPFS.

If you run the expert dialog during installation, any free hard disk space is also listed and automatically selected. To provide more disk space to openSUSE Leap, free the needed space by going from the bottom toward the top in the list of partitions.

5.1.1 Partition tables Edit source

openSUSE Leap allows to use and create different partition tables. In some cases the partition table is called disk label. The partition table is important to the boot process of your computer. To boot your machine from a partition in a newly created partition table, make sure that the table format is supported by the firmware.

To change the partition table, click the relevant disk name in the System View and choose Expert › Create New Partition Table.

5.1.1.1 Master boot record Edit source

The master boot record (MBR) is the legacy partition table used on IBM PCs. It is sometimes also called an MS-DOS partition table. The MBR only supports four primary partitions. If the disk already has an MBR, openSUSE Leap allows you to create additional partitions in it which can be used as the installation target.

The limit of four partitions can be overcome by creating an extended partition. The extended partition itself is a primary partition and can contain more logical partitions.

UEFI firmware usually supports booting from MBR in the legacy mode.

5.1.1.2 GPT partition table Edit source

UEFI computers use a GUID Partition Table (GPT) by default. openSUSE Leap will create a GPT on a disk if no other partition table exists.

Old BIOS firmware does not support booting from GPT partitions.

You need a GPT partition table to use one of the following features:

  • More than four primary partitions

  • UEFI Secure Boot

  • Use disks larger than 2 TB

Note
Note: Mislabeled partitions created with Parted 3.1 or earlier versions

GPT partitions created with Parted 3.1 or earlier versions use the Microsoft Basic Data partition type instead of the newer Linux-specific GPT GUID. Newer versions of Parted set the misleading flag msftdata on such partitions. This causes various disk tools to label the partition as a Windows Data Partition or similar.

To remove the flag, run:

# parted DEVICE set PARTITION_NUMBER msftdata off

5.1.2 Partitions Edit source

The YaST Partitioner can create and format partitions with several file systems. The default file system used by openSUSE Leap is Btrfs. For details, see Section 5.1.2.2, “Btrfs partitioning”.

Other commonly used file systems are available: Ext2, Ext3, Ext4, FAT, XFS, Swap, and UDF.

5.1.2.1 Creating a partition Edit source

To create a partition select Hard Disks and then a hard disk with free space. The actual modification can be done in the Partitions tab:

  1. Click Add to create a new partition. When using MBR, specify to create a primary or extended partition. Within the extended partition, you can create several logical partitions. For details, see Section 5.1.1, “Partition tables”.

  2. Specify the size of the new partition. You can either choose to occupy all the free unpartitioned space, or enter a custom size.

  3. Select the file system to use and a mount point. YaST suggests a mount point for each partition created. To use a different mount method, like mount by label, select Fstab Options.

  4. Specify additional file system options if your setup requires them. This is necessary, for example, if you need persistent device names. For details on the available options, refer to Section 5.1.3, “Editing a partition”.

  5. Click Finish to apply your partitioning setup and leave the partitioning module.

    If you created the partition during installation, you are returned to the installation overview screen.

5.1.2.2 Btrfs partitioning Edit source

The default file system for the root partition is Btrfs. For details, see . The root file system is the default subvolume and it is not listed in the list of created subvolumes. As a default Btrfs subvolume, it can be mounted as a normal file system.

Important
Important: Btrfs on an encrypted root partition

The default partitioning setup suggests the root partition as Btrfs with /boot being a directory. To encrypt the root partition, make sure to use the GPT partition table type instead of the default MSDOS type. Otherwise the GRUB2 boot loader may not have enough space for the second stage loader.

It is possible to create snapshots of Btrfs subvolumes—either manually, or automatically based on system events. For example when making changes to the file system, zypper invokes the snapper command to create snapshots before and after the change. This is useful if you are not satisfied with the change zypper made and want to restore the previous state. As snapper invoked by zypper creates snapshots of the root file system by default, it makes sense to exclude specific directories from snapshots. This is the reason YaST suggests creating the following separate subvolumes:

/boot/grub2/i386-pc, /boot/grub2/x86_64-efi, /boot/grub2/powerpc-ieee1275, /boot/grub2/s390x-emu

A rollback of the boot loader configuration is not supported. The directories listed above are architecture-specific. The first two directories are present on AMD64/Intel 64 machines, the latter two on IBM POWER and on IBM Z, respectively.

/home

If /home does not reside on a separate partition, it is excluded to avoid data loss on rollbacks.

/opt

Third-party products usually get installed to /opt. It is excluded to avoid uninstalling these applications on rollbacks.

/srv

Contains data for Web and FTP servers. It is excluded to avoid data loss on rollbacks.

/tmp

All directories containing temporary files and caches are excluded from snapshots.

/usr/local

This directory is used when manually installing software. It is excluded to avoid uninstalling these installations on rollbacks.

/var

This directory contains many variable files, including logs, temporary caches, third party products in /var/opt, and is the default location for virtual machine images and databases. Therefore this subvolume is created to exclude all of this variable data from snapshots and has Copy-On-Write disabled.

Tip
Tip: Size of Btrfs partition

Since saved snapshots require more disk space, it is recommended to reserve enough space for Btrfs. While the minimum size for a root Btrfs partition with snapshots and default subvolumes is 16 GB, SUSE recommends at least 32 GB, or more if /home does not reside on a separate partition.

5.1.2.3 Managing Btrfs subvolumes using YaST Edit source

Subvolumes of a Btrfs partition can be now managed with the YaST Expert Partitioner module. You can add new or delete existing subvolumes.

Procedure 5.1: Btrfs subvolumes with YaST
  1. Choose Btrfs in the left side pane.

  2. Select the Btrfs partition whose subvolumes you need to manage.

  3. Depending on whether you want to edit, add, or delete subvolumes, do the following:

    1. To edit a subvolume, select it from the list and click Edit. You can then disable copy-on-write (check noCoW) for the volume or limit its size. Click Accept to finish.

    2. To add a new subvolume, click Add Subvolume, and enter its path. Optionally, you can disable copy-on-write (check noCoW) for the volume or limit its size. Click Accept to finish.

    3. To delete a subvolume, select it from the list and click Delete. Confirm the deletion by clicking Yes.

    4. Btrfs subvolumes in YaST partitioner
      Figure 5.2: Btrfs subvolumes in YaST partitioner
  4. Leave the partitioner with Finish.

5.1.3 Editing a partition Edit source

When you create a new partition or modify an existing partition, you can set various parameters. For new partitions, the default parameters set by YaST are usually sufficient and do not require any modification. To edit your partition setup manually, proceed as follows:

  1. Select the partition.

  2. Click Edit to edit the partition and set the parameters:

    File system ID

    Even if you do not want to format the partition at this stage, assign it a file system ID to ensure that the partition is registered correctly. Typical values are Linux, Linux swap, Linux LVM, and Linux RAID.

    File System

    To change the partition file system, click Format Partition and select file system type in the File System list.

    openSUSE Leap supports several types of file systems. Btrfs is the Linux file system of choice for the root partition because of its advanced features. It supports copy-on-write functionality, creating snapshots, multi-device spanning, subvolumes, and other useful techniques. XFS, Ext3, and Ext4 are journaling file systems. These file systems can restore the system very quickly after a system crash, using write processes logged during the operation. Ext2 is not a journaling file system, but it is adequate for smaller partitions because it does not require much disk space for management.

    The default file system for the root partition is Btrfs. The default file system for additional partitions is XFS.

    The UDF file system can be used on optical rewritable and non-rewritable media, USB flash drives and hard disks. It is supported by multiple operating systems.

    Swap is a special format that allows the partition to be used as a virtual memory. Create a swap partition of at least 256 MB. However, if you use up your swap space, consider adding memory to your system instead of adding swap space.

    Warning
    Warning: Changing the file system

    Changing the file system and reformatting partitions irreversibly deletes all data from the partition.

    For details on the various file systems, refer to Storage Administration Guide.

    Encrypt Device

    If you activate the encryption, all data is written to the hard disk in encrypted form. This increases the security of sensitive data, but reduces the system speed, as the encryption takes some time to process.

    Mount Point

    Specify the directory where the partition should be mounted in the file system tree. Select from YaST suggestions or enter any other name.

    Fstab Options

    Specify various parameters contained in the global file system administration file (/etc/fstab). The default settings should suffice for most setups. You can, for example, change the file system identification from the device name to a volume label. In the volume label, use all characters except / and space.

    To get persistent devices names, use the mount option Device ID, UUID or LABEL. In openSUSE Leap, persistent device names are enabled by default.

    If you prefer to mount the partition by its label, you need to define one in the Volume label text entry. For example, you could use the partition label HOME for a partition intended to mount to /home.

    If you intend to use quotas on the file system, use the mount option Enable Quota Support. This must be done before you can define quotas for users in the YaST User Management module.

  3. Select Finish to save the changes.

Note
Note: Resize file systems

To resize an existing file system, select the partition and use Resize. Note, that it is not possible to resize partitions while mounted. To resize partitions, unmount the relevant partition before running the partitioner.

5.1.4 Expert options Edit source

After you select a hard disk device (like sda) in the System View pane, you can access the Expert menu in the lower right part of the Expert Partitioner window. The menu contains the following commands:

Create new partition table

This option helps you create a new partition table on the selected device.

Warning
Warning: Creating a new partition table

Creating a new partition table on a device irreversibly deletes all partitions and their data from that device.

Clone this disk

This option helps you clone the device partition layout (but not the data) to other available disk devices.

5.1.5 Advanced options Edit source

After you select the host name of the computer (the top-level of the tree in the System View pane), you can access the Configure menu in the lower right part of the Expert Partitioner window. The menu contains the following commands:

Configure iSCSI

To access SCSI over IP block devices, you first need to configure iSCSI. This results in additionally available devices in the main partition list.

Configure multipath

Selecting this option helps you configure the multipath enhancement to the supported mass storage devices.

5.1.6 More partitioning tips Edit source

The following section includes a few hints and tips on partitioning that should help you make the right decisions when setting up your system.

5.1.6.1 Cylinder numbers Edit source

Note, that different partitioning tools may start counting the cylinders of a partition with 0 or with 1. When calculating the number of cylinders, you should always use the difference between the last and the first cylinder number and add one.

5.1.6.2 Using swap Edit source

Swap is used to extend the available physical memory. It is then possible to use more memory than physical RAM available. The memory management system of kernels before 2.4.10 needed swap as a safety measure. Then, if you did not have twice the size of your RAM in swap, the performance of the system suffered. These limitations no longer exist.

Linux uses a page called Least Recently Used (LRU) to select pages that might be moved from memory to disk. Therefore, running applications have more memory available and caching works more smoothly.

If an application tries to allocate the maximum allowed memory, problems with swap can arise. There are three major scenarios to look at:

System with no swap

The application gets the maximum allowed memory. All caches are freed, and thus all other running applications are slowed. After a few minutes, the kernel's out-of-memory kill mechanism activates and kills the process.

System with medium sized swap (128 MB–512 MB)

At first, the system slows like a system without swap. After all physical RAM has been allocated, swap space is used as well. At this point, the system becomes very slow and it becomes impossible to run commands from remote. Depending on the speed of the hard disks that run the swap space, the system stays in this condition for about 10 to 15 minutes until the out-of-memory kill mechanism resolves the issue. Note that you will need a certain amount of swap if the computer needs to perform a suspend to disk. In that case, the swap size should be large enough to contain the necessary data from memory (512 MB–1GB).

System with lots of swap (several GB)

It is better to not have an application that is out of control and swapping excessively in this case. If you use such application, the system will need many hours to recover. In the process, it is likely that other processes get timeouts and faults, leaving the system in an undefined state, even after terminating the faulty process. In this case, do a hard machine reboot and try to get it running again. Lots of swap is only useful if you have an application that relies on this feature. Such applications (like databases or graphics manipulation programs) often have an option to directly use hard disk space for their needs. It is advisable to use this option instead of using lots of swap space.

If your system is not out of control, but needs more swap after some time, it is possible to extend the swap space online. If you prepared a partition for swap space, add this partition with YaST. If you do not have a partition available, you can also use a swap file to extend the swap. Swap files are generally slower than partitions, but compared to physical RAM, both are extremely slow so the actual difference is negligible.

Procedure 5.2: Adding a swap file manually

To add a swap file in the running system, proceed as follows:

  1. Create an empty file in your system. For example, to add a swap file with 128 MB swap at /var/lib/swap/swapfile, use the commands:

    > sudo mkdir -p /var/lib/swap
    > sudo dd if=/dev/zero of=/var/lib/swap/swapfile bs=1M count=128
  2. Initialize this swap file with the command

    > sudo mkswap /var/lib/swap/swapfile
    Note
    Note: Changed UUID for swap partitions when formatting via mkswap

    Do not reformat existing swap partitions with mkswap if possible. Reformatting with mkswap will change the UUID value of the swap partition. Either reformat via YaST (which will update /etc/fstab) or adjust /etc/fstab manually.

  3. Activate the swap with the command

    > sudo swapon /var/lib/swap/swapfile

    To disable this swap file, use the command

    > sudo swapoff /var/lib/swap/swapfile
  4. Check the current available swap spaces with the command

    > cat /proc/swaps

    Note that at this point, it is only temporary swap space. After the next reboot, it is no longer used.

  5. To enable this swap file permanently, add the following line to /etc/fstab:

    /var/lib/swap/swapfile swap swap defaults 0 0

5.1.7 Partitioning and LVM Edit source

From the Expert Partitioner, access the LVM configuration by clicking the Volume Management item in the System View pane. However, if a working LVM configuration already exists on your system, it is automatically activated upon entering the initial LVM configuration of a session. In this case, all disks containing a partition (belonging to an activated volume group) cannot be repartitioned. The Linux kernel cannot reread the modified partition table of a hard disk when any partition on this disk is in use. If you already have a working LVM configuration on your system, physical repartitioning should not be necessary. Instead, change the configuration of the logical volumes.

At the beginning of the physical volumes (PVs), information about the volume is written to the partition. To reuse such a partition for other non-LVM purposes, it is advisable to delete the beginning of this volume. For example, in the VG system and PV /dev/sda2, do this with the command:

dd if=/dev/zero of=/dev/sda2 bs=512 count=1
Warning
Warning: File system for booting

The file system used for booting (the root file system or /boot) must not be stored on an LVM logical volume. Instead, store it on a normal physical partition.

5.2 LVM configuration Edit source

This section explains specific steps to take when configuring LVM.

Warning
Warning: Back up your data

Using LVM is sometimes associated with increased risk such as data loss. Risks also include application crashes, power failures, and faulty commands. Save your data before implementing LVM or reconfiguring volumes. Never work without a backup.

The YaST LVM configuration can be reached from the YaST Expert Partitioner (see Section 5.1, “Using the Expert Partitioner) within the Volume Management item in the System View pane. The Expert Partitioner allows you to manage hard disks and partitions, as well as setting up RAID and LVM configurations.

5.2.1 Create physical volume Edit source

The first task is to create physical volumes that provide space to a volume group:

  1. Select a hard disk from Hard Disks.

  2. Change to the Partitions tab.

  3. Click Add and enter the desired size of the PV on this disk.

  4. Use Do not format partition and change the File System ID to 0x8E Linux LVM. Do not mount this partition.

  5. Repeat this procedure until you have defined all the desired physical volumes on the available disks.

5.2.2 Creating volume groups Edit source

If no volume group exists on your system, you must add one (see Figure 5.3, “Creating a volume group”). It is possible to create additional groups by clicking Volume Management in the System View pane, and then on Add Volume Group. One single volume group is usually sufficient.

  1. Enter a name for the VG, for example, system.

  2. Select the desired Physical Extend Size. This value defines the size of a physical block in the volume group. All the disk space in a volume group is handled in blocks of this size.

  3. Add the prepared PVs to the VG by selecting the device and clicking Add. Selecting several devices is possible by holding Ctrl while selecting the devices.

  4. Select Finish to make the VG available to further configuration steps.

Creating a volume group
Figure 5.3: Creating a volume group

If you have multiple volume groups defined and want to add or remove PVs, select the volume group in the Volume Management list and click Resize. In the following window, you can add PVs to or remove them from the selected volume group.

5.2.3 Configuring logical volumes Edit source

After the volume group has been filled with PVs, define the LVs which the operating system should use in the next dialog. Choose the current volume group and change to the Logical Volumes tab. Add, Edit, Resize, and Delete LVs as needed until all space in the volume group has been occupied. Assign at least one LV to each volume group.

Logical volume management
Figure 5.4: Logical volume management

Click Add and go through the wizard-like pop-up that opens:

  1. Enter the name of the LV. For a partition that should be mounted to /home, a name like HOME could be used.

  2. Select the type of the LV. It can be either Normal Volume, Thin Pool, or Thin Volume. Note that you need to create a thin pool first, which can store individual thin volumes. The big advantage of thin provisioning is that the total sum of all thin volumes stored in a thin pool can exceed the size of the pool itself.

  3. Select the size and the number of stripes of the LV. If you have only one PV, selecting more than one stripe is not useful.

  4. Choose the file system to use on the LV and the mount point.

By using stripes it is possible to distribute the data stream in the LV among several PVs (striping). However, striping a volume can only be done over different PVs, each providing at least the amount of space of the volume. The maximum number of stripes equals to the number of PVs, where Stripe "1" means "no striping". Striping only makes sense with PVs on different hard disks, otherwise performance will decrease.

Warning
Warning: Striping

YaST cannot verify your entries concerning striping at this point. Mistakes made here will show later when the LVM is implemented on disk.

If you have already configured LVM on your system, the existing logical volumes can also be used. Before continuing, assign appropriate mount points to these LVs. With Finish, return to the YaST Expert Partitioner and finish your work there.

5.3 Soft RAID Edit source

This section describes actions required to create and configure various types of RAID. .

5.3.1 Soft RAID configuration Edit source

The YaST RAID configuration can be reached from the YaST Expert Partitioner, described in Section 5.1, “Using the Expert Partitioner. This partitioning tool enables you to edit and delete existing partitions and create new ones to be used with soft RAID:

  1. Select a hard disk from Hard Disks.

  2. Change to the Partitions tab.

  3. Click Add and enter the desired size of the raid partition on this disk.

  4. Use Do not Format the Partition and change the File System ID to 0xFD Linux RAID. Do not mount this partition.

  5. Repeat this procedure until you have defined all the desired physical volumes on the available disks.

For RAID 0 and RAID 1, at least two partitions are needed—for RAID 1, usually exactly two and no more. If RAID 5 is used, at least three partitions are required, RAID 6 and RAID 10 require at least four partitions. It is recommended to use partitions of the same size only. The RAID partitions should be located on different hard disks to decrease the risk of losing data if one is defective (RAID 1 and 5) and to optimize the performance of RAID 0. After creating all the partitions to use with RAID, click RAID › Add RAID to start the RAID configuration.

In the next dialog, choose between RAID levels 0, 1, 5, 6 and 10. Then, select all partitions with either the Linux RAID or Linux native type that should be used by the RAID system. No swap or DOS partitions are shown.

RAID partitions
Figure 5.5: RAID partitions

To add a previously unassigned partition to the selected RAID volume, first click the partition then Add. Assign all partitions reserved for RAID. Otherwise, the space on the partition remains unused. After assigning all partitions, click Next to select the available RAID Options.

In this last step, set the file system to use, encryption and the mount point for the RAID volume. After completing the configuration with Finish, see the /dev/md0 device and others indicated with RAID in the Expert Partitioner.

5.3.2 Troubleshooting Edit source

Check the file /proc/mdstat to find out whether a RAID partition is damaged. If the system fails, shut down the machine and replace the defective hard disk with a new one partitioned the same way. Then restart your system and run mdadm /dev/mdX --add /dev/sdX. Replace 'X' with your particular device identifiers. This integrates the hard disk automatically into the RAID system and fully reconstructs it.

Note that although you can access all data during the rebuild, you may encounter some performance issues until the RAID has been fully rebuilt.

5.3.3 More information Edit source

Configuration instructions and more details for soft RAID can be found at:

Linux RAID mailing lists are available, such as http://marc.info/?l=linux-raid.

6 Installing multiple kernel versions Edit source

Abstract

openSUSE Leap supports the parallel installation of multiple kernel versions. When installing a second kernel, a boot entry and an initrd are automatically created, so no further manual configuration is needed. When rebooting the machine, the newly added kernel is available as an additional boot parameter.

Using this functionality, you can safely test kernel updates while being able to always fall back to the proven former kernel. To do this, do not use the update tools (such as the YaST Online Update or the updater applet), but instead follow the process described in this chapter.

Tip
Tip: Check your boot loader configuration kernel

It is recommended to check your boot loader configuration after having installed another kernel to set the default boot entry of your choice. See Section 12.3, “Configuring the boot loader with YaST” for more information.

6.1 Enabling and configuring multiversion support Edit source

Installing multiple versions of a software package (multiversion support) is enabled by default with openSUSE Leap and newer versions. To verify this setting, proceed as follows:

  1. Open /etc/zypp/zypp.conf with the editor of your choice as root.

  2. Search for the string multiversion. If multiversion is enabled for all kernel packages capable of this feature, the following line appears uncommented:

    multiversion = provides:multiversion(kernel)
  3. To restrict multiversion support to certain kernel flavors, add the package names as a comma-separated list to the multiversion option in /etc/zypp/zypp.conf—for example

    multiversion = kernel-default,kernel-default-base,kernel-source
  4. Save your changes.

Warning
Warning: Kernel Module Packages (KMP)

Make sure that required vendor-provided kernel modules (Kernel Module Packages) are also installed for the new updated kernel. The kernel update process will not warn about eventually missing kernel modules because package requirements are still fulfilled by the old kernel that is kept on the system.

6.1.1 Automatically deleting unused kernels Edit source

When frequently testing new kernels with multiversion support enabled, the boot menu quickly becomes confusing. Since a /boot partition normally has limited space, you may run into trouble with /boot overflowing. While you can delete unused kernel versions manually with YaST or Zypper (as described below), you can also configure libzypp to automatically delete kernels no longer used. By default no kernels are deleted.

  1. Open /etc/zypp/zypp.conf with the editor of your choice as root.

  2. Search for the string multiversion.kernels and activate this option by uncommenting the line. This option takes a comma-separated list of the following values:

    5.3.18-53.3 keep the kernel with the specified version number

    latest keep the kernel with the highest version number

    latest-N keep the kernel with the Nth highest version number

    running keep the running kernel

    oldest keep the kernel with the lowest version number (the one that was originally shipped with openSUSE Leap)

    oldest+N keep the kernel with the Nth lowest version number

    Here are several examples

    multiversion.kernels = latest,running

    Keep the latest kernel and the one currently running. This is similar to not enabling the multiversion feature, except that the old kernel is removed after the next reboot and not immediately after the installation.

    multiversion.kernels = latest,latest-1,running

    Keep the last two kernels and the one currently running.

    multiversion.kernels = latest,running,5.3.18-53.3

    Keep the latest kernel, the one currently running, and 5.3.18-53.3.

    Tip
    Tip: Keep the running kernel

    Unless you are using a special setup, always keep the kernel marked running.

    If you do not keep the running kernel, it will be deleted when updating the kernel. In turn, this means that all the running kernel's modules are also deleted and cannot be loaded anymore.

    If you decide not to keep the running kernel, always reboot immediately after a kernel upgrade to avoid issues with modules.

6.1.2 Use case: deleting an old kernel after reboot only Edit source

You want to make sure that an old kernel will only be deleted after the system has rebooted successfully with the new kernel.

Change the following line in /etc/zypp/zypp.conf:

multiversion.kernels = latest,running

The previous parameters tell the system to keep the latest kernel and the running one only if they differ.

6.1.3 Use case: keeping older kernels as fallback Edit source

You want to keep one or more kernel versions to have one or more spare kernels.

This can be useful if you need kernels for testing. If something goes wrong (for example, your machine does not boot), you still can use one or more kernel versions which are known to be good.

Change the following line in /etc/zypp/zypp.conf:

multiversion.kernels = latest,latest-1,latest-2,running

When you reboot your system after the installation of a new kernel, the system will keep three kernels: the current kernel (configured as latest,running) and its two immediate predecessors (configured as latest-1 and latest-2).

6.1.4 Use case: keeping a specific kernel version Edit source

You make regular system updates and install new kernel versions. However, you are also compiling your own kernel version and want to make sure that the system will keep them.

Change the following line in /etc/zypp/zypp.conf:

multiversion.kernels = latest,5.3.18-53.3,running

When you reboot your system after the installation of a new kernel, the system will keep two kernels: the new and running kernel (configured as latest,running) and your self-compiled kernel (configured as 5.3.18-53.3).

6.2 Installing/removing multiple kernel versions with YaST Edit source

You can install or remove multiple kernels with YaST:

  1. Start YaST and open the software manager via Software › Software Management.

  2. List all packages capable of providing multiple versions by choosing View › Package Classification › Multiversion Packages.

    The YaST software manager: multiversion view
    Figure 6.1: The YaST software manager: multiversion view
  3. Select a package and open its Version tab in the bottom pane on the left.

  4. To install a package, click the check box next to it. A green check mark indicates it is selected for installation.

    To remove an already installed package (marked with a white check mark), click the check box next to it until a red X indicates it is selected for removal.

  5. Click Accept to start the installation.

6.3 Installing/removing multiple kernel versions with Zypper Edit source

You can install or remove multiple kernels with zypper:

  1. Use the command zypper se -s 'kernel*' to display a list of all kernel packages available:

    S  | Name                 | Type    | Version           | Arch   | Repository
    ---+----------------------+---------+-------------------+--------+------------------------------------------------------
    i+ | kernel-default              | package | 5.14.21-150400.6.3              | x86_64 | SLE-Module-Basesystem15-SP4-Pool
       | kernel-default-base         | package | 5.14.21-150400.6.3.150400.22.27 | x86_64 | SLE-Module-Basesystem15-SP4-Pool
       | kernel-default-devel        | package | 5.14.21-150400.6.3              | x86_64 | SLE-Module-Basesystem15-SP4-Pool
       | kernel-devel                | package | 5.14.21-150400.6.4              | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-all         | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-amdgpu      | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-ath10k      | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-ath11k      | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-atheros     | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-bluetooth   | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-bnx2        | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-brcm        | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-chelsio     | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-dpaa2       | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-i915        | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-intel       | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-iwlwifi     | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-liquidio    | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-marvell     | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-media       | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-mediatek    | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-mellanox    | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-mwifiex     | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-network     | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-nfp         | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-nvidia      | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-platform    | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-prestera    | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-qcom        | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-qlogic      | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-radeon      | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-realtek     | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-serial      | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-sound       | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-ti          | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-ueagle      | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
    i  | kernel-firmware-usb-network | package | 20220119-150400.1.1             | noarch | SLE-Module-Basesystem15-SP4-Pool
       | kernel-macros               | package | 5.14.21-150400.6.4              | noarch | SLE-Module-Basesystem15-SP4-Pool
  2. Specify the exact version when installing:

    > sudo zypper in kernel-default-5.3.18-53.3
  3. When uninstalling a kernel, use the commands zypper se -si 'kernel*' to list all kernels installed and zypper rm PACKAGENAME-VERSION to remove the package.

6.4 Installing the latest kernel version from the repository Kernel:HEAD Edit source

  1. Add the Kernel:HEAD repository with (the repository is added using the alias kernel-repo):

    > sudo zypper ar \
    http://download.opensuse.org/repositories/Kernel:/HEAD/standard/ \
    kernel-repo
  2. To refresh repositories, run:

    > sudo zypper ref
  3. To upgrade the kernel to the latest version in the Kernel:HEAD repository, run:

    > sudo zypper dist-upgrade --allow-vendor-change --from kernel-repo
  4. Reboot the machine.

Warning
Warning: Installing from Kernel:HEAD may break the system

Installing a kernel from Kernel:HEAD should never be necessary, because important fixes are backported by SUSE and are made available as official updates. Installing the latest kernel only makes sense for kernel developers and kernel testers. If installing from Kernel:HEAD, be aware that it may break your system. Make sure to always have the original kernel available for booting as well.

7 Graphical user interface Edit source

Abstract

openSUSE Leap includes the X.org server, Wayland and the GNOME desktop. This chapter describes the configuration of the graphical user interface for all users.

7.1 X Window System Edit source

The X.org server is the de facto standard for implementing the X11 protocol. X is network-based, enabling applications started on one host to be displayed on another host connected over any kind of network (LAN or Internet).

The X Window System needs no configuration in most cases. The hardware is dynamically detected during X start-up. The use of xorg.conf is therefore deprecated. If you still need to specify custom options to change the way X behaves, you can still do so by modifying configuration files under /etc/X11/xorg.conf.d/.

In openSUSE Leap 15.5 Wayland is included as an alternative to the X.org server. It can be selected during the installation.

Install the package xorg-docs to get more in-depth information about X11. man 5 xorg.conf tells you more about the format of the manual configuration (if needed). More information on the X11 development can be found on the project's home page at http://www.x.org.

Drivers are found in xf86-video-* packages, for example xf86-video-ati. Many of the drivers delivered with these packages are described in detail in the related manual page. For example, if you use the ati driver, find more information about this driver in man 4 ati.

Information about third-party drivers is available in /usr/share/doc/packages/<package_name>. For example, the documentation of x11-video-nvidiaG03 is available in /usr/share/doc/packages/x11-video-nvidiaG04 after the package was installed.

Install the package xrdp on a server and use RDP client software to access the server via the remote desktop protocol.

7.2 Installing and configuring fonts Edit source

Fonts in Linux can be categorized into two parts:

Outline or vector fonts

Contains a mathematical description as drawing instructions about the shape of a glyph. As such, each glyph can be scaled to arbitrary sizes without loss of quality. Before such a font (or glyph) can be used, the mathematical descriptions need to be transformed into a raster (grid). This process is called font rasterization. Font hinting (embedded inside the font) improves and optimizes the rendering result for a particular size. Rasterization and hinting is done with the FreeType library.

Common formats under Linux are PostScript Type 1 and Type 2, TrueType, and OpenType.

Bitmap or raster fonts

Consists of an array of pixels designed for a specific font size. Bitmap fonts are extremely fast and simple to render. However, compared to vector fonts, bitmap fonts cannot be scaled without losing quality. As such, these fonts are usually distributed in different sizes. These days, bitmap fonts are still used in the Linux console and sometimes in terminals.

Under Linux, Portable Compiled Format (PCF) or Glyph Bitmap Distribution Format (BDF) are the most common formats.

The appearance of these fonts can be influenced by two main aspects:

  • choosing a suitable font family,

  • rendering the font with an algorithm that achieves results comfortable for the receiver's eyes.

The last point is only relevant to vector fonts. Although the above two points are highly subjective, some defaults need to be created.

Linux font rendering systems consist of several libraries with different relations. The basic font rendering library is FreeType, which converts font glyphs of supported formats into optimized bitmap glyphs. The rendering process is controlled by an algorithm and its parameters (which may be subject to patent issues).

Every program or library which uses FreeType should consult the Fontconfig library. This library gathers font configuration from users and from the system. When a user amends their Fontconfig setting, this change will result in Fontconfig-aware applications.

More sophisticated OpenType shaping needed for scripts such as Arabic, Han or Phags-Pa and other higher level text processing is done using Harfbuzz or Pango.

7.2.1 Showing installed fonts Edit source

To get an overview about which fonts are installed on your system, ask the commands rpm or fc-list. Both will give you a good answer, but may return a different list depending on system and user configuration:

rpm

Invoke rpm to see which software packages containing fonts are installed on your system:

> rpm -qa '*fonts*'

Every font package should satisfy this expression. However, the command may return some false positives like fonts-config (which is neither a font nor does it contain fonts).

fc-list

Invoke fc-list to get an overview about what font families can be accessed, whether they are installed on the system or in your home:

> fc-list ':' family
Note
Note: Command fc-list

The command fc-list is a wrapper to the Fontconfig library. It is possible to query a lot of interesting information from Fontconfig—or, to be more precise, from its cache. See man 1 fc-list for more details.

7.2.2 Viewing fonts Edit source

If you want to know what an installed font family looks like, either use the command ftview (package ft2demos) or visit http://fontinfo.opensuse.org/. For example, to display the FreeMono font in 14 point, use ftview like this:

> ftview 14 /usr/share/fonts/truetype/FreeMono.ttf

If you need further information, go to http://fontinfo.opensuse.org/ to find out which styles (regular, bold, italic, etc.) and languages are supported.

7.2.3 Querying fonts Edit source

To query which font is used when a pattern is given, use the fc-match command.

For example, if your pattern contains an already installed font, fc-match returns the file name, font family, and the style:

> fc-match 'Liberation Serif'
LiberationSerif-Regular.ttf: "Liberation Serif" "Regular"

If the desired font does not exist on your system, Fontconfig's matching rules take place and try to find the most similar fonts available. This means, your request is substituted:

> fc-match 'Foo Family'
DejaVuSans.ttf: "DejaVu Sans" "Book"

Fontconfig supports aliases: a name is substituted with another family name. A typical example are the generic names such as sans-serif, serif, and monospace. These alias names can be substituted by real family names or even a preference list of family names:

> for font in serif sans mono; do fc-match "$font" ; done
DejaVuSerif.ttf: "DejaVu Serif" "Book"
DejaVuSans.ttf: "DejaVu Sans" "Book"
DejaVuSansMono.ttf: "DejaVu Sans Mono" "Book"

The result may vary on your system, depending on which fonts are currently installed.

Note
Note: Similarity rules according to fontconfig

Fontconfig always returns a real family (if at least one is installed) according to the given request, as similar as possible. Similarity depends on Fontconfig's internal metrics and on the user's or administrator's Fontconfig settings.

7.2.4 Installing fonts Edit source

To install a new font there are these major methods:

  1. Manually install the font files such as *.ttf or *.otf to a known font directory. If it needs to be system-wide, use the standard directory /usr/share/fonts. For installation in your home directory, use ~/.config/fonts.

    If you want to deviate from the standard directories, Fontconfig allows you to choose another one. Let Fontconfig know by using the <dir> element, see Section 7.2.5.2, “Diving into fontconfig XML” for details.

  2. Install fonts using zypper. Lots of fonts are already available as a package, be it on your SUSE distribution or in the M17N:fonts repository. Add the repository to your list using the following command. For example, to add a repository for openSUSE Leap 15.5:

    > sudo zypper ar
         https://download.opensuse.org/repositories/M17N:/fonts/openSUSE_Leap_15.5/

    To search for your FONT_FAMILY_NAME use this command:

    > zypper se 'FONT_FAMILY_NAME*fonts'

7.2.5 Configuring the appearance of fonts Edit source

Depending on the rendering medium, and font size, the result may be unsatisfactory. For example, an average monitor these days has a resolution of 100dpi which makes pixels too big and glyphs look clunky.

There are several algorithms available to deal with low resolutions, such as anti-aliasing (grayscale smoothing), hinting (fitting to the grid), or subpixel rendering (tripling resolution in one direction). These algorithms can also differ from one font format to another.

Via Fontconfig, it is possible to select a rendering algorithms for every font individually or for a set of fonts.

7.2.5.1 Configuring fonts via sysconfig Edit source

openSUSE Leap comes with a sysconfig layer above Fontconfig. This is a good starting point for experimenting with font configuration. To change the default settings, edit the configuration file /etc/sysconfig/fonts-config. (or use the YaST sysconfig module). After you have edited the file, run fonts-config:

> sudo /usr/sbin/fonts-config

Restart the application to make the effect visible. Keep in mind the following issues:

  • A few applications do need not to be restarted. For example, Firefox re-reads Fontconfig configuration from time to time. Newly created or reloaded tabs get new font configurations later.

  • The fonts-config script is called automatically after every package installation or removal (if not, it is a bug of the font software package).

  • Every sysconfig variable can be temporarily overridden by the fonts-config command line option. See fonts-config --help for details.

There are several sysconfig variables which can be altered. See man 1 fonts-config or the help page of the YaST sysconfig module. The following variables are examples:

Usage of rendering algorithms

Consider FORCE_HINTSTYLE, FORCE_AUTOHINT, FORCE_BW, FORCE_BW_MONOSPACE, USE_EMBEDDED_BITMAPS and EMBEDDED_BITMAP_LANGAGES

Preference lists of generic aliases

Use PREFER_SANS_FAMILIES, PREFER_SERIF_FAMILIES, PREFER_MONO_FAMILIES and SEARCH_METRIC_COMPATIBLE

The following list provides some configuration examples, sorted from the most readable fonts (more contrast) to most beautiful (more smoothed).

Bitmap fonts

Prefer bitmap fonts via the PREFER_*_FAMILIES variables. Follow the example in the help section for these variables. Be aware that these fonts are rendered black and white, not smoothed and that bitmap fonts are available in several sizes only. Consider using

SEARCH_METRIC_COMPATIBLE="no"

to disable metric compatibility-driven family name substitutions.

Scalable fonts rendered black and white

Scalable fonts rendered without antialiasing can result in a similar outcome to bitmap fonts, while maintaining font scalability. Use well hinted fonts like the Liberation families. Unfortunately, there is a lack of well hinted fonts though. Set the following variable to force this method:

FORCE_BW="yes"
Monospaced fonts rendered black and white

Render monospaced fonts without antialiasing only, otherwise use default settings:

FORCE_BW_MONOSPACE="yes"
Default settings

All fonts are rendered with antialiasing. Well hinted fonts will be rendered with the byte code interpreter (BCI) and the rest with autohinter (hintstyle=hintslight). Leave all relevant sysconfig variables to the default setting.

CFF fonts

Use fonts in CFF format. They can be considered also more readable than the default TrueType fonts given the current improvements in FreeType2. Try them out by following the example of PREFER_*_FAMILIES. Possibly make them more dark and bold with:

SEARCH_METRIC_COMPATIBLE="no"

as they are rendered by hintstyle=hintslight by default. Also consider using:

SEARCH_METRIC_COMPATIBLE="no"
Autohinter exclusively

Even for a well hinted font, use FreeType2's autohinter. That can lead to thicker, sometimes fuzzier letter shapes with lower contrast. Set the following variable to activate this:

FORCE_AUTOHINTER="yes"

Use FORCE_HINTSTYLE to control the level of hinting.

7.2.5.2 Diving into fontconfig XML Edit source

Fontconfig's configuration format is the eXtensible Markup Language (XML). These few examples are not a complete reference, but a brief overview. Details and other inspiration can be found in man 5 fonts-conf or in /etc/fonts/conf.d/.

The central Fontconfig configuration file is /etc/fonts/fonts.conf, which—along other work—includes the whole /etc/fonts/conf.d/ directory. To customize Fontconfig, there are two places where you can insert your changes:

Fontconfig configuration files
  1. System-wide changes.  Edit the file /etc/fonts/local.conf (by default, it contains an empty fontconfig element).

  2. User-specific changes.  Edit the file ~/.config/fontconfig/fonts.conf. Place Fontconfig configuration files in the ~/.config/fontconfig/conf.d/ directory.

User-specific changes overwrite any system-wide settings.

Note
Note: Deprecated user configuration file

The file ~/.fonts.conf is marked as deprecated and should not be used anymore. Use ~/.config/fontconfig/fonts.conf instead.

Every configuration file needs to have a fontconfig element. As such, the minimal file looks like this:

<?xml version="1.0"?>
   <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
   <fontconfig>
   <!-- Insert your changes here -->
   </fontconfig>

If the default directories are not enough, insert the dir element with the respective directory:

<dir>/usr/share/fonts2</dir>

Fontconfig searches recursively for fonts.

Font-rendering algorithms can be chosen with following Fontconfig snippet (see Example 7.1, “Specifying rendering algorithms”):

Example 7.1: Specifying rendering algorithms
<match target="font">
 <test name="family">
  <string>FAMILY_NAME</string>
 </test>
 <edit name="antialias" mode="assign">
  <bool>true</bool>
 </edit>
 <edit name="hinting" mode="assign">
  <bool>true</bool>
 </edit>
 <edit name="autohint" mode="assign">
  <bool>false</bool>
 </edit>
 <edit name="hintstyle" mode="assign">
  <const>hintfull</const>
 </edit>
</match>

Various properties of fonts can be tested. For example, the <test> element can test for the font family (as shown in the example), size interval, spacing, font format, and others. When abandoning <test> completely, all <edit> elements will be applied to every font (global change).

Example 7.2: Aliases and family name substitutions
Rule 1
<alias>
 <family>Alegreya SC</family>
 <default>
  <family>serif</family>
 </default>
</alias>
Rule 2
<alias>
 <family>serif</family>
 <prefer>
  <family>Droid Serif</family>
 </prefer>
</alias>
Rule 3
<alias>
 <family>serif</family>
 <accept>
  <family>STIXGeneral</family>
 </accept>
</alias>

The rules from Example 7.2, “Aliases and family name substitutions” create a prioritized family list (PFL). Depending on the element, different actions are performed:

<default> from Rule 1

This rule adds a serif family name at the end of the PFL.

<prefer> from Rule 2

This rule adds Droid Serif just before the first occurrence of serif in the PFL, whenever Alegreya SC is in PFL.

<accept> from Rule 3

This rule adds a STIXGeneral family name just after the first occurrence of the serif family name in the PFL.

Putting this together, when snippets occur in the order Rule 1 - Rule 2 - Rule 3 and the user requests Alegreya SC, then the PFL is created as depicted in Table 7.1, “Generating PFL from fontconfig rules”.

Table 7.1: Generating PFL from fontconfig rules

Order

Current PFL

Request

Alegreya SC

Rule 1

Alegreya SC, serif

Rule 2

Alegreya SC, Droid Serif, serif

Rule 3

Alegreya SC, Droid Serif, serif, STIXGeneral

In Fontconfig's metrics, the family name has the highest priority over other patterns, like style, size, etc. Fontconfig checks which family is currently installed on the system. If Alegreya SC is installed, then Fontconfig returns it. If not, it asks for Droid Serif, etc.

Be careful. When the order of Fontconfig snippets is changed, Fontconfig can return different results, as depicted in Table 7.2, “Results from generating PFL from fontconfig rules with changed order”.

Table 7.2: Results from generating PFL from fontconfig rules with changed order

Order

Current PFL

Note

Request

Alegreya SC

Same request performed.

Rule 2

Alegreya SC

serif not in PFL, nothing is substituted

Rule 3

Alegreya SC

serif not in PFL, nothing is substituted

Rule 1

Alegreya SC, serif

Alegreya SC present in PFL, substitution is performed

Note
Note: Implication

Think of the <default> alias as a classification or inclusion of this group (if not installed). As the example shows, <default> should always precede the <prefer> and <accept> aliases of that group.

<default> classification is not limited to the generic aliases serif, sans-serif and monospace. See /usr/share/fontconfig/conf.avail/30-metric-aliases.conf for a complex example.

The following Fontconfig snippet in Example 7.3, “Aliases and family name substitutions” creates a serif group. Every family in this group could substitute others when a former font is not installed.

Example 7.3: Aliases and family name substitutions
<alias>
 <family>Alegreya SC</family>
 <default>
  <family>serif</family>
 </default>
</alias>
<alias>
 <family>Droid Serif</family>
 <default>
  <family>serif</family>
 </default>
</alias>
<alias>
 <family>STIXGeneral</family>
 <default>
  <family>serif</family>
 </default>
</alias>
<alias>
 <family>serif</family>
 <accept>
  <family>Droid Serif</family>
  <family>STIXGeneral</family>
  <family>Alegreya SC</family>
 </accept>
</alias>

Priority is given by the order in the <accept> alias. Similarly, stronger <prefer> aliases can be used.

Example 7.2, “Aliases and family name substitutions” is expanded by Example 7.4, “Aliases and family names substitutions”.

Example 7.4: Aliases and family names substitutions
Rule 4
<alias>
 <family>serif</family>
 <accept>
  <family>Liberation Serif</family>
 </accept>
</alias>
Rule 5
<alias>
 <family>serif</family>
 <prefer>
  <family>DejaVu Serif</family>
 </prefer>
</alias>

The expanded configuration from Example 7.4, “Aliases and family names substitutions” would lead to the following PFL evolution:

Table 7.3: Results from generating PFL from fontconfig rules

Order

Current PFL

Request

Alegreya SC

Rule 1

Alegreya SC, serif

Rule 2

Alegreya SC, Droid Serif, serif

Rule 3

Alegreya SC, Droid Serif, serif, STIXGeneral

Rule 4

Alegreya SC, Droid Serif, serif, Liberation Serif, STIXGeneral

Rule 5

Alegreya SC, Droid Serif, DejaVu Serif, serif, Liberation Serif, STIXGeneral

Note
Note: Implications.
  • In case multiple <accept> declarations for the same generic name exist, the declaration that is parsed last wins. If possible, do not use <accept> after user (/etc/fonts/conf.d/*-user.conf) when creating a system-wide configuration.

  • In case multiple <prefer declarations for the same generic name exist, the declaration that is parsed last wins. If possible, do not use <prefer> before user in the system-wide configuration.

  • Every <prefer> declaration overwrites <accept> declarations for the same generic name. If the administrator wants to allow the user to use <accept> and not only <prefer>, the administrator should not use <prefer> in the system-wide configuration. On the other hand, as users mostly use <prefer>, this should not have any detrimental effect. We also see the use of <prefer> in system-wide configurations.

7.3 GNOME configuration for administrators Edit source

7.3.1 The dconf system Edit source

Configuration of the GNOME desktop is managed with dconf. It is a hierarchically structured database or registry that allows users to modify their personal settings, and system administrators to set default or mandatory values for all users. dconf replaces the gconf system of GNOME 2.

Use dconf-editor to view the dconf options with a graphical user interface. Use dconf to access and modify configuration options with the command line.

The GNOME Tweaks tool provides an easy-to-use user interface for additional configuration options beyond the normal GNOME configuration. The tool can be started from the GNOME application menu or from the command line with gnome-tweak-tool.

7.3.2 System-wide configuration Edit source

Global dconf configuration parameters can be set in the /etc/dconf/db/ directory. This includes the configuration for GDM or locking certain configuration options for users.

Use the following procedure as an example to create a system-wide configuration:

  1. Create a new directory that ends with a .d in /etc/dconf/db/. This directory can contain an arbitrary amount of text files with configuration options. For this example, create the file /etc/dconf/db/network.d/00-proxy with the following content:

    # This is a comment
    [system/proxy/http]
    host='10.0.0.1'
    enabled=true
  2. Parse the new configuration directives into the dconf database format:

    > sudo dconf update
  3. Add the new network configuration database to the default user profile, by creating the file /etc/dconf/profiles/user. Then add the following content:

    system-db:network

    The file /etc/dconf/profiles/user is a GNOME default. Other profiles can be defined in the environment variable DCONF_PROFILE.

  4. Optional: to lock the proxy configuration for users, create the file /etc/dconf/db/network/locks/proxy. Then add a line to this file with the keys that may not be changed:

    /system/proxy/http/host
    /system/proxy/http/enabled

You can use the graphical dconf-editor to create a profile with one user and then use dconf dump / to list all configuration options. The configuration options can then be stored in a global profile.

A detailed description of the global configuration is available at https://wiki.gnome.org/Projects/dconf/SystemAdministrators.

7.3.3 More information Edit source

For more information, see http://help.gnome.org/admin/.

7.4 Switching between Intel and NVIDIA Optimus GPUs with SUSE Prime Edit source

SUSE Prime is a tool for switching between onboard Intel graphical processing units (GPUs), and NVIDIA GPUs equipped with NVIDIA's "switchable graphics" Optimus technology. Optimus provides a mechanism for easily switching between an onboard Intel GPU and a discrete NVIDIA GPU. This is designed for running a laptop in a power-saving mode or at maximum performance: use the Intel GPU to save power, and the NVIDIA GPU for 3D applications.

SUSE Prime works only on systems running X11, not Wayland. If your system runs Wayland, you must disable it and fall back to X11 to use SUSE Prime (see Section 7.4.1, “Prerequisites”).

7.4.1 Prerequisites Edit source

You must have a configured and working NVIDIA Optimus GPU using the NVIDIA proprietary drivers from the openSUSE community repository (see Section 7.4.3, “Installing NVIDIA drivers”), and an onboard Intel GPU. Bumblebee, the older switching tool for NVIDIA Optimus, must not be installed.

There must not be a /etc/X11/xorg.conf file, and no configuration files with active "ServerLayout", "Device", or "Screen" sections in the /etc/X11/xorg.conf.d directory.

SUSE Prime works only with X11. Use the loginctl command to see if your system is using X11 or Wayland:

> loginctl
   SESSION        UID USER             SEAT             TTY             
         2       1000 tux             seat0               
> loginctl show-session 2|grep Type
Type=x11

If your system uses Wayland, disable it by editing /etc/gdm/custom.conf and un-commenting WaylandEnable=false. Then reboot.

7.4.2 Installing and using SUSE Prime Edit source

Your NVIDIA graphics card should already be installed and working. If it is not, see Section 7.4.3, “Installing NVIDIA drivers”.

Install the suse-prime package:

> sudo zypper install suse-prime

To switch your GPU run one of the following commands, then log out and log back in:

> sudo prime-select intel
> sudo prime-select intel2
> sudo prime-select nvidia

Use the intel driver when it is the modesetting driver. intel2 is for systems that use the xf86-video-intel driver. You can get this information by installing and running inxi:

> inxi -G
Graphics: Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller
          Display Server: x11(X.org 1.20.1 ) drivers: modesetting (unloaded: fbdev, vesa)
          Resolution: 1920x1080@60.00hz
          OpenGL: renderer: Mesa DRI Intel Haswell Desktop version: 4.5 Mesa 18.2.8

Which GPU is currently active?

> sudo /usr/sbin/prime-select get-current
Driver configured: intel

7.4.3 Installing NVIDIA drivers Edit source

If you need to identify your NVIDIA card so you know which driver to use, run the following command:

> /sbin/lspci | grep VGA

Follow these steps to install the drivers with Zypper. First install the community repository for your distribution. For openSUSE Tumbleweed:

> sudo zypper addrepo --refresh https://download.nvidia.com/opensuse/tumbleweed nvidia

For openSUSE 15.5:

> sudo zypper addrepo --refresh https://download.nvidia.com/opensuse/leap/15.5 nvidia

List the available driver packages:

> sudo zypper se nvidia

Then install the drivers for your NVIDIA graphics card:

> sudo zypper se packagename

Part II System Edit source

8 32-bit and 64-bit applications in a 64-bit system environment

openSUSE® Leap is available for 64-bit platforms. The developers have not ported all 32-bit applications to 64-bit systems. This chapter offers a brief overview of 32-bit support implementation on 64-bit openSUSE Leap platforms.

9 Introduction to the boot process

Booting a Linux system involves different components and tasks. After a firmware and hardware initialization process, which depends on the machine's architecture, the kernel is started by means of the boot loader GRUB 2. After this point, the boot process is completely controlled by the operating system and handled by systemd. systemd provides a set of targets that boot configurations for everyday usage, maintenance or emergencies.

10 The systemd daemon

systemd is responsible for initializing the system, and it has the process ID 1. systemd is started directly by the kernel and resists signal 9, which normally terminates processes. All other programs are either started directly by systemd or by one of its child processes. systemd is a replacement f…

11 journalctl: query the systemd journal

systemd features its own logging system called journal. There is no need to run a syslog-based service, as all system events are written to the journal.

12 The boot loader GRUB 2

This chapter describes how to configure GRUB 2, the boot loader used in openSUSE® Leap. A YaST module is available for configuring the most important settings. The boot procedure as a whole is outlined in Chapter 9, Introduction to the boot process. For details on Secure Boot support for UEFI machines, see Chapter 14, UEFI (Unified Extensible Firmware Interface).

13 Basic networking

Linux offers the necessary networking tools and features for integration into all types of network structures. Network access using a network card can be configured with YaST. Manual configuration is also possible. In this chapter, only the fundamental mechanisms and the relevant network configuration files are covered.

14 UEFI (Unified Extensible Firmware Interface)

UEFI (Unified Extensible Firmware Interface) is the interface between the firmware that comes with the system hardware, all the hardware components of the system, and the operating system.

15 Special system features

This chapter starts with information about various software packages, the virtual consoles and the keyboard layout. We talk about software components like bash, cron and logrotate, because they were changed or enhanced during the last release cycles. Even if they are small or considered of minor importance, users should change their default behavior, because these components are often closely coupled with the system. The chapter concludes with a section about language and country-specific settings (I18N and L10N).

16 Dynamic kernel device management with udev

The kernel can add or remove almost any device in a running system. Changes in the device state (whether a device is plugged in or removed) need to be propagated to user space. Devices need to be configured when they are plugged in and recognized. Users of a certain device need to be informed about …

8 32-bit and 64-bit applications in a 64-bit system environment Edit source

openSUSE® Leap is available for 64-bit platforms. The developers have not ported all 32-bit applications to 64-bit systems. This chapter offers a brief overview of 32-bit support implementation on 64-bit openSUSE Leap platforms.

openSUSE Leap for the 64-bit platforms AMD64 and Intel 64 is designed so that existing 32-bit applications run in the 64-bit environment out-of-the-box. This support means that you can continue to use your preferred 32-bit applications without waiting for a corresponding 64-bit port to become available.

Note
Note: No support for building 32-bit applications

openSUSE Leap does not support compilation of 32-bit applications. It only offers runtime support for 32-bit binaries.

8.1 Runtime support Edit source

Important
Important: Conflicts between application versions

If an application is available for both 32-bit and 64-bit environments, installing both versions may cause problems. In such cases, decide on one version to install to avoid potential runtime errors.

An exception to this rule is PAM (pluggable authentication modules). openSUSE Leap uses PAM in the authentication process as a layer that mediates between user and application. Always install both PAM versions on 64-bit operating systems that also run 32-bit applications.

For correct execution, every application requires a range of libraries. Unfortunately, the names are identical for the 32-bit and 64-bit versions of these libraries. They must be differentiated from each other in another way.

To retain compatibility with 32-bit versions, 64-bit and 32-bit libraries are stored in the same location. The 32-bit version of libc.so.6 is located under /lib/libc.so.6 in both 32-bit and 64-bit environments.

All 64-bit libraries and object files are located in directories called lib64. The 64-bit object files normally found under /lib and /usr/lib are now found under /lib64 and /usr/lib64. This means that space is available for 32-bit libraries under /lib and /usr/lib, so the file name for both versions can remain unchanged.

If the data content of 32-bit subdirectories under /lib does not depend on word size, they are not moved. This scheme conforms to LSB (Linux Standards Base) and FHS (File System Hierarchy Standard).

8.2 Kernel specifications Edit source

The 64-bit kernels for AMD64/Intel 64 offer both a 64-bit and a 32-bit kernel ABI (application binary interface). The latter is identical to the ABI for the corresponding 32-bit kernel. This means that communication between both 32-bit and 64-bit applications with 64-bit kernels are identical.

The 32-bit system call emulation for 64-bit kernels does not support all the APIs used by system programs. This depends on the platform. For this reason, few applications, like lspci, must be compiled.

A 64-bit kernel can only load 64-bit kernel modules. You must compile 64-bit modules specifically for 64-bit kernels. It is not possible to use 32-bit kernel modules with 64-bit kernels.

Tip
Tip: Kernel-loadable modules

Some applications require separate kernel-loadable modules. If you intend to use a 32-bit application in a 64-bit system environment, contact the provider of the application and SUSE. Make sure that the 64-bit version of the kernel-loadable module and the 32-bit compiled version of the kernel API are available for this module.

9 Introduction to the boot process Edit source

Abstract

Booting a Linux system involves different components and tasks. After a firmware and hardware initialization process, which depends on the machine's architecture, the kernel is started by means of the boot loader GRUB 2. After this point, the boot process is completely controlled by the operating system and handled by systemd. systemd provides a set of targets that boot configurations for everyday usage, maintenance or emergencies.

9.1 Terminology Edit source

This chapter uses terms that can be interpreted ambiguously. To understand how they are used here, read the definitions below:

init

Two different processes are commonly named init:

  • The initramfs process mounting the root file system

  • The operating system process that starts all other processes that is executed from the real root file system

In both cases, the systemd program is taking care of this task. It is first executed from the initramfs to mount the root file system. When that has succeeded, it is re-executed from the root file system as the initial process. To avoid confusing these two systemd processes, we refer to the first process as init on initramfs and to the second one as systemd.

initrd/initramfs

An initrd (initial RAM disk) is an image file containing a root file system image which is loaded by the kernel and mounted from /dev/ram as the temporary root file system. Mounting this file system requires a file system driver.

Beginning with kernel 2.6.13, the initrd has been replaced by the initramfs (initial RAM file system), which does not require a file system driver to be mounted. openSUSE Leap exclusively uses an initramfs. However, since the initramfs is stored as /boot/initrd, it is often called initrd. In this chapter we exclusively use the name initramfs.

9.2 The Linux boot process Edit source

The Linux boot process consists of several stages, each represented by a different component:

9.2.1 The initialization and boot loader phase Edit source

During the initialization phase the machine's hardware is set up and the devices are prepared. This process differs significantly between hardware architectures.

openSUSE Leap uses the boot loader GRUB 2 on all architectures. Depending on the architecture and firmware, starting the GRUB 2 boot loader can be a multi-step process. The purpose of the boot loader is to load the kernel and the initial, RAM-based file system (initramfs). For more information about GRUB 2, refer to Chapter 12, The boot loader GRUB 2.

9.2.1.1 Initialization and boot loader phase on AArch64 and AMD64/Intel 64 Edit source

After turning on the computer, the BIOS or the UEFI initializes the screen and keyboard, and tests the main memory. Up to this stage, the machine does not access any mass storage media. Subsequently, the information about the current date, time, and the most important peripherals are loaded from the CMOS values. When the boot media and its geometry are recognized, the system control passes from the BIOS/UEFI to the boot loader.

On a machine equipped with a traditional BIOS, only code from the first physical 512-byte data sector (the Master Boot Record, MBR) of the boot disk can be loaded. Only a minimal GRUB 2 fits into the MBR. Its sole purpose is to load a GRUB 2 core image containing file system drivers from the gap between the MBR and the first partition (MBR partition table) or from the BIOS boot partition (GPT partition table). This image contains file system drivers and therefore is able to access /boot located on the root file system. /boot contains additional modules for GRUB 2 core as well as the kernel and the initramfs image. When it has access to this partition, GRUB 2 loads the kernel and the initramfs image into memory and hands control over to the kernel.

When booting a BIOS system from an encrypted file system that includes an encrypted /boot partition, you need to enter the password for decryption twice. It is first needed by GRUB 2 to decrypt /boot and then for systemd to mount the encrypted volumes.

On machines with UEFI the boot process is much simpler than on machines with a traditional BIOS. The firmware is able to read from a FAT formatted system partition of disks with a GPT partition table. This EFI system-partition (in the running system mounted as /boot/efi) holds enough space to host a fully-fledged GRUB 2 which is directly loaded and executed by the firmware.

If the BIOS/UEFI supports network booting, it is also possible to configure a boot server that provides the boot loader. The system can then be booted via PXE. The BIOS/UEFI acts as the boot loader. It gets the boot image from the boot server and starts the system. This is completely independent of local hard disks.

9.2.2 The kernel phase Edit source

When the boot loader has passed on system control, the boot process is the same on all architectures. The boot loader loads both the kernel and an initial RAM-based file system (initramfs) into memory and the kernel takes over.

After the kernel has set up memory management and has detected the CPU type and its features, it initializes the hardware and mounts the temporary root file system from the memory that was loaded with the initramfs.

9.2.2.1 The initramfs file Edit source

initramfs (initial RAM file system) is a small cpio archive that the kernel can load into a RAM disk. It is located at /boot/initrd. It can be created with a tool called dracut—refer to man 8 dracut for details.

The initramfs provides a minimal Linux environment that enables the execution of programs before the actual root file system is mounted. This minimal Linux environment is loaded into memory by BIOS or UEFI routines and does not have specific hardware requirements other than sufficient memory. The initramfs archive must always provide an executable named init that executes the systemd daemon on the root file system for the boot process to proceed.

Before the root file system can be mounted and the operating system can be started, the kernel needs the corresponding drivers to access the device on which the root file system is located. These drivers may include special drivers for certain kinds of hard disks or even network drivers to access a network file system. The needed modules for the root file system are loaded by init on initramfs. After the modules are loaded, udev provides the initramfs with the needed devices. Later in the boot process, after changing the root file system, it is necessary to regenerate the devices. This is done by the systemd unit systemd-udev-trigger.service.

9.2.2.1.1 Regenerating the initramfs Edit source

Because the initramfs contains drivers, it needs to be updated whenever a new version of one of its drivers is available. This is done automatically when installing the package containing the driver update. YaST or zypper will inform you about this by showing the output of the command that generates the initramfs. However, there are some occasions when you need to regenerate an initramfs manually:

Adding drivers because of hardware changes

If you need to change hardware (for example, hard disks), and this hardware requires different drivers to be in the kernel at boot time, you must update the initramfs file.

Open or create /etc/dracut.conf.d/10-DRIVER.conf and add the following line (mind the leading blank space):

force_drivers+=" DRIVER1 "

Replace DRIVER1 with the module name of the driver. If you need to add more than one driver, list them space-separated:

force_drivers+=" DRIVER1 DRIVER2 "

Proceed with Procedure 9.1, “Generate an initramfs”.

Moving system directories to a RAID or LVM

Whenever you move swap files, or system directories like /usr in a running system to a RAID or logical volume, you need to create an initramfs that contains support for software RAID or LVM drivers.

To do so, create the respective entries in /etc/fstab and mount the new entries (for example with mount -a and/or swapon -a).

Proceed with Procedure 9.1, “Generate an initramfs”.

Adding disks to an LVM group or Btrfs RAID containing the root file system

Whenever you add (or remove) a disk to a logical volume group or a Btrfs RAID containing the root file system, you need to create an initramfs that contains support for the enlarged volume. Follow the instructions at Procedure 9.1, “Generate an initramfs”.

Proceed with Procedure 9.1, “Generate an initramfs”.

Changing kernel variables

If you change the values of kernel variables via the sysctl interface by editing related files (/etc/sysctl.conf or /etc/sysctl.d/*.conf), the change will be lost on the next system reboot. Even if you load the values with sysctl --system at runtime, the changes are not saved into the initramfs file. You need to update it by proceeding as outlined in Procedure 9.1, “Generate an initramfs”.

Procedure 9.1: Generate an initramfs

Note that all commands in the following procedure need to be executed as the root user.

  1. Enter your /boot directory:

    # cd /boot
  2. Generate a new initramfs file with dracut, replacing MY_INITRAMFS with a file name of your choice:

    # dracut MY_INITRAMFS

    Alternatively, run dracut -f FILENAME to replace an existing init file.

  3. (Skip this step if you ran dracut -f in the previous step.) Create a symbolic link from the initramfs file you created in the previous step to initrd:

    #  ln -sf MY_INITRAMFS initrd

9.2.3 The init on initramfs phase Edit source

The temporary root file system mounted by the kernel from the initramfs contains the executable systemd (which is called init on initramfs in the following, also see Section 9.1, “Terminology”. This program performs all actions needed to mount the proper root file system. It provides kernel functionality for the needed file system and device drivers for mass storage controllers with udev.

The main purpose of init on initramfs is to prepare the mounting of and access to the real root file system. Depending on your system configuration, init on initramfs is responsible for the following tasks.

Loading kernel modules

Depending on your hardware configuration, special drivers may be needed to access the hardware components of your computer (the most important component being your hard disk). To access the final root file system, the kernel needs to load the proper file system drivers.

Providing block special files

The kernel generates device events depending on loaded modules. udev handles these events and generates the required special block files on a RAM file system in /dev. Without those special files, the file system and other devices would not be accessible.

Managing RAID and LVM setups

If you configured your system to hold the root file system under RAID or LVM, init on initramfs sets up LVM or RAID to enable access to the root file system later.

Managing the network configuration

If you configured your system to use a network-mounted root file system (mounted via NFS), init must make sure that the proper network drivers are loaded and that they are set up to allow access to the root file system.

If the file system resides on a network block device like iSCSI or SAN, the connection to the storage server is also set up by init on initramfs. openSUSE Leap supports booting from a secondary iSCSI target if the primary target is not available. .

Note
Note: Handling of mount failures

If the root file system fails to mount from within the boot environment, it must be checked and repaired before the boot can continue. The file system checker will be automatically started for Ext3 and Ext4 file systems. The repair process is not automated for XFS and Btrfs file systems, and the user is presented with information describing the options available to repair the file system. When the file system has been successfully repaired, exiting the boot environment will cause the system to retry mounting the root file system. If successful, the boot will continue normally.

9.2.3.1 The init on initramfs phase in the installation process Edit source

When init on initramfs is called during the initial boot as part of the installation process, its tasks differ from those mentioned above. Note that the installation system also does not start systemd from initramfs—these tasks are performed by linuxrc.

Finding the installation medium

When starting the installation process, your machine loads an installation kernel and a special init containing the YaST installer. The YaST installer is running in a RAM file system and needs to have information about the location of the installation medium to access it for installing the operating system.

Initiating hardware recognition and loading appropriate kernel modules

As mentioned in Section 9.2.2.1, “The initramfs file”, the boot process starts with a minimum set of drivers that can be used with most hardware configurations. On AArch64, POWER, and AMD64/Intel 64 machines, linuxrc starts an initial hardware scanning process that determines the set of drivers suitable for your hardware configuration. On IBM Z, a list of drivers and their parameters needs to be provided, for example via linuxrc or a parmfile.

These drivers are used to generate a custom initramfs that is needed to boot the system. If the modules are not needed for boot but for coldplug, the modules can be loaded with systemd; for more information, see Section 10.6.4, “Loading kernel modules”.

Loading the installation system

When the hardware is properly recognized, the appropriate drivers are loaded. The udev program creates the special device files and linuxrc starts the installation system with the YaST installer.

Starting YaST

Finally, linuxrc starts YaST, which starts the package installation and the system configuration.

9.2.4 The systemd phase Edit source

After the real root file system has been found, it is checked for errors and mounted. If this is successful, the initramfs is cleaned and the systemd daemon on the root file system is executed. systemd is Linux's system and service manager. It is the parent process that is started as PID 1 and acts as an init system which brings up and maintains user space services. See Chapter 10, The systemd daemon for details.

10 The systemd daemon Edit source

systemd is responsible for initializing the system, and it has the process ID 1. systemd is started directly by the kernel and resists signal 9, which normally terminates processes. All other programs are either started directly by systemd or by one of its child processes. systemd is a replacement for the System V init daemon and fully compatible with System V init (by supporting init scripts).

The main advantage of systemd is that it considerably speeds up boot time by parallelizing service starts. Furthermore, systemd only starts a service when it is really needed. Daemons are not started unconditionally at boot time, but when being required for the first time. systemd also supports Kernel Control Groups (cgroups), creating snapshots, and restoring the system state. For more details see http://www.freedesktop.org/wiki/Software/systemd/.

10.1 The systemd concept Edit source

The following section explains the concept behind systemd.

systemd is a system and session manager for Linux, compatible with System V and LSB init scripts. The main features of systemd include:

  • parallelization capabilities

  • socket and D-Bus activation for starting services

  • on-demand starting of daemons

  • tracking of processes using Linux cgroups

  • creating snapshots and restoring of the system state

  • maintains mount and automount points

  • implements an elaborate transactional dependency-based service control logic

10.1.1 Unit file Edit source

A unit configuration file contains information about a service, a socket, a device, a mount point, an automount point, a swap file or partition, a start-up target, a watched file system path, a timer controlled and supervised by systemd, a temporary system state snapshot, a resource management slice or a group of externally created processes.

Unit file is a generic term used by systemd for the following:

  • Service.  Information about a process (for example running a daemon); file ends with .service

  • Targets.  Used for grouping units and as synchronization points during start-up; file ends with .target

  • Sockets.  Information about an IPC or network socket or a file system FIFO, for socket-based activation (like inetd); file ends with .socket

  • Path.  Used to trigger other units (for example running a service when files change); file ends with .path

  • Timer.  Information about a timer controlled, for timer-based activation; file ends with .timer

  • Mount point.  Normally auto-generated by the fstab generator; file ends with .mount

  • Automount point.  Information about a file system automount point; file ends with .automount

  • Swap.  Information about a swap device or file for memory paging; file ends with .swap

  • Device.  Information about a device unit as exposed in the sysfs/udev(7) device tree; file ends with .device

  • Scope / slice.  A concept for hierarchically managing resources of a group of processes; file ends with .scope/.slice

For more information about systemd unit files, see http://www.freedesktop.org/software/systemd/man/systemd.unit.html

10.2 Basic usage Edit source

The System V init system uses several commands to handle services—the init scripts, insserv, telinit and others. systemd makes it easier to manage services, since there is only one command to memorize for the majority of service-handling tasks: systemctl. It uses the command plus subcommand notation like git or zypper:

systemctl GENERAL OPTIONS SUBCOMMAND SUBCOMMAND OPTIONS

See man 1 systemctl for a complete manual.

Tip
Tip: Terminal output and Bash completion

If the output goes to a terminal (and not to a pipe or a file, for example), systemd commands send long output to a pager by default. Use the --no-pager option to turn off paging mode.

systemd also supports bash-completion, allowing you to enter the first letters of a subcommand and then press →|. This feature is only available in the bash shell and requires the installation of the package bash-completion.

10.2.1 Managing services in a running system Edit source

Subcommands for managing services are the same as for managing a service with System V init (start, stop, ...). The general syntax for service management commands is as follows:

systemd
systemctl reload|restart|start|status|stop|... MY_SERVICE(S)
System V init
rcMY_SERVICE(S) reload|restart|start|status|stop|...

systemd allows you to manage several services in one go. Instead of executing init scripts one after the other as with System V init, execute a command like the following:

> sudo systemctl start MY_1ST_SERVICE MY_2ND_SERVICE

To list all services available on the system:

> sudo systemctl list-unit-files --type=service

The following table lists the most important service management commands for systemd and System V init:

Table 10.1: Service management commands

Task

systemd Command

System V init Command

Starting. 

start
start

Stopping. 

stop
stop

Restarting.  Shuts down services and starts them afterward. If a service is not yet running it will be started.

restart
restart

Restarting conditionally.  Restarts services if they are currently running. Does nothing for services that are not running.

try-restart
try-restart

Reloading.  Tells services to reload their configuration files without interrupting operation. Use case: tell Apache to reload a modified httpd.conf configuration file. Not all services support reloading.

reload
reload

Reloading or restarting.  Reloads services if reloading is supported, otherwise restarts them. If a service is not yet running it will be started.

reload-or-restart
n/a

Reloading or restarting conditionally.  Reloads services if reloading is supported, otherwise restarts them if currently running. Does nothing for services that are not running.

reload-or-try-restart
n/a

Getting detailed status information.  Lists information about the status of services. The systemd command shows details such as description, executable, status, cgroup, and messages last issued by a service (see Section 10.6.9, “Debugging services”). The level of details displayed with the System V init differs from service to service.

status
status

Getting short status information.  Shows whether services are active or not.

is-active
status

10.2.2 Permanently enabling/disabling services Edit source

The service management commands mentioned in the previous section let you manipulate services for the current session. systemd also lets you permanently enable or disable services, so they are automatically started when requested or are always unavailable. You can either do this by using YaST, or on the command line.

10.2.2.1 Enabling/disabling services on the command line Edit source

The following table lists enabling and disabling commands for systemd and System V init:

Important
Important: Service start

When enabling a service on the command line, it is not started automatically. It is scheduled to be started with the next system start-up or runlevel/target change. To immediately start a service after having enabled it, explicitly run systemctl start MY_SERVICE or rc MY_SERVICE start.

Table 10.2: Commands for enabling and disabling services

Task

systemd Command

System V init Command

Enabling. 

systemctl enable MY_SERVICE(S)

insserv MY_SERVICE(S), chkconfig -a MY_SERVICE(S)

Disabling. 

systemctl disable MY_SERVICE(S).service

insserv -r MY_SERVICE(S), chkconfig -d MY_SERVICE(S)

Checking.  Shows whether a service is enabled or not.

systemctl is-enabled MY_SERVICE

chkconfig MY_SERVICE

Re-enabling.  Similar to restarting a service, this command first disables and then enables a service. Useful to re-enable a service with its defaults.

systemctl reenable MY_SERVICE

n/a

Masking.  After disabling a service, it can still be started manually. To completely disable a service, you need to mask it. Use with care.

systemctl mask MY_SERVICE

n/a

Unmasking.  A service that has been masked can only be used again after it has been unmasked.

systemctl unmask MY_SERVICE

n/a

10.3 System start and target management Edit source

The entire process of starting the system and shutting it down is maintained by systemd. From this point of view, the kernel can be considered a background process to maintain all other processes and adjust CPU time and hardware access according to requests from other programs.

10.3.1 Targets compared to runlevels Edit source

With System V init the system was booted into a so-called Runlevel. A runlevel defines how the system is started and what services are available in the running system. Runlevels are numbered; the most commonly known ones are 0 (shutting down the system), 3 (multiuser with network) and 5 (multiuser with network and display manager).

systemd introduces a new concept by using so-called target units. However, it remains fully compatible with the runlevel concept. Target units are named rather than numbered and serve specific purposes. For example, the targets local-fs.target and swap.target mount local file systems and swap spaces.

The target graphical.target provides a multiuser system with network and display manager capabilities and is equivalent to runlevel 5. Complex targets, such as graphical.target act as meta targets by combining a subset of other targets. Since systemd makes it easy to create custom targets by combining existing targets, it offers great flexibility.

The following list shows the most important systemd target units. For a full list refer to man 7 systemd.special.

Selected systemd target units
default.target

The target that is booted by default. Not a real target, but rather a symbolic link to another target like graphic.target. Can be permanently changed via YaST (see Section 10.4, “Managing services with YaST”). To change it for a session, use the kernel parameter systemd.unit=MY_TARGET.target at the boot prompt.

emergency.target

Starts an emergency shell on the console. Only use it at the boot prompt as systemd.unit=emergency.target.

graphical.target

Starts a system with network, multiuser support and a display manager.

halt.target

Shuts down the system.

mail-transfer-agent.target

Starts all services necessary for sending and receiving mails.

multi-user.target

Starts a multiuser system with network.

reboot.target

Reboots the system.

rescue.target

Starts a single-user system without network.

To remain compatible with the System V init runlevel system, systemd provides special targets named runlevelX.target mapping the corresponding runlevels numbered X.

If you want to know the current target, use the command: systemctl get-default

Table 10.3: System V runlevels and systemd target units

System V runlevel

systemd target

Purpose

0

runlevel0.target, halt.target, poweroff.target

System shutdown

1, S

runlevel1.target, rescue.target,

Single-user mode

2

runlevel2.target, multi-user.target,

Local multiuser without remote network

3

runlevel3.target, multi-user.target,

Full multiuser with network

4

runlevel4.target

Unused/User-defined

5

runlevel5.target, graphical.target,

Full multiuser with network and display manager

6

runlevel6.target, reboot.target,

System reboot

Important
Important: systemd ignores /etc/inittab

The runlevels in a System V init system are configured in /etc/inittab. systemd does not use this configuration. Refer to Section 10.5.4, “Creating custom targets” for instructions on how to create your own bootable target.

10.3.1.1 Commands to change targets Edit source

Use the following commands to operate with target units:

Task

systemd Command

System V init Command

Change the current target/runlevel

systemctl isolate MY_TARGET.target

telinit X

Change to the default target/runlevel

systemctl default

n/a

Get the current target/runlevel

systemctl list-units --type=target

With systemd there is usually more than one active target. The command lists all currently active targets.

who -r

or

runlevel

persistently change the default runlevel

Use the Services Manager or run the following command:

ln -sf /usr/lib/systemd/system/ MY_TARGET.target /etc/systemd/system/default.target

Use the Services Manager or change the line

id: X:initdefault:

in /etc/inittab

Change the default runlevel for the current boot process

Enter the following option at the boot prompt

systemd.unit= MY_TARGET.target

Enter the desired runlevel number at the boot prompt.

Show a target's/runlevel's dependencies

systemctl show -p "Requires" MY_TARGET.target

systemctl show -p "Wants" MY_TARGET.target

Requires lists the hard dependencies (the ones that must be resolved), whereas Wants lists the soft dependencies (the ones that get resolved if possible).

n/a

10.3.2 Debugging system start-up Edit source

systemd offers the means to analyze the system start-up process. You can review the list of all services and their status (rather than having to parse /var/log/). systemd also allows you to scan the start-up procedure to find out how much time each service start-up consumes.

10.3.2.1 Review start-up of services Edit source

To review the complete list of services that have been started since booting the system, enter the command systemctl. It lists all active services like shown below (shortened). To get more information on a specific service, use systemctl status MY_SERVICE.

Example 10.1: List active services
# systemctl
UNIT                        LOAD   ACTIVE SUB       JOB DESCRIPTION
[...]
iscsi.service               loaded active exited    Login and scanning of iSC+
kmod-static-nodes.service   loaded active exited    Create list of required s+
libvirtd.service            loaded active running   Virtualization daemon
nscd.service                loaded active running   Name Service Cache Daemon
chronyd.service             loaded active running   NTP Server Daemon
polkit.service              loaded active running   Authorization Manager
postfix.service             loaded active running   Postfix Mail Transport Ag+
rc-local.service            loaded active exited    /etc/init.d/boot.local Co+
rsyslog.service             loaded active running   System Logging Service
[...]
LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

161 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

To restrict the output to services that failed to start, use the --failed option:

Example 10.2: List failed services
# systemctl --failed
UNIT                   LOAD   ACTIVE SUB    JOB DESCRIPTION
apache2.service        loaded failed failed     apache
NetworkManager.service loaded failed failed     Network Manager
plymouth-start.service loaded failed failed     Show Plymouth Boot Screen

[...]

10.3.2.2 Debug start-up time Edit source

To debug system start-up time, systemd offers the systemd-analyze command. It shows the total start-up time, a list of services ordered by start-up time and can also generate an SVG graphic showing the time services took to start in relation to the other services.

Listing the system start-up time
# systemd-analyze
Startup finished in 2666ms (kernel) + 21961ms (userspace) = 24628ms
Listing the services start-up time
# systemd-analyze blame
    15.000s backup-rpmdb.service
    14.879s mandb.service
     7.646s backup-sysconfig.service
     4.940s postfix.service
     4.921s logrotate.service
     4.640s libvirtd.service
     4.519s display-manager.service
     3.921s btrfsmaintenance-refresh.service
     3.466s lvm2-monitor.service
     2.774s plymouth-quit-wait.service
     2.591s firewalld.service
     2.137s initrd-switch-root.service
     1.954s ModemManager.service
     1.528s rsyslog.service
     1.378s apparmor.service
    [...]
Services start-up time graphics
# systemd-analyze plot > jupiter.example.com-startup.svg

10.3.2.3 Review the complete start-up process Edit source

The commands above list the services that are started and their start-up times. For a more detailed overview, specify the following parameters at the boot prompt to instruct systemd to create a verbose log of the complete start-up procedure.

systemd.log_level=debug systemd.log_target=kmsg

Now systemd writes its log messages into the kernel ring buffer. View that buffer with dmesg:

> dmesg -T | less

10.3.3 System V compatibility Edit source

systemd is compatible with System V, allowing you to still use existing System V init scripts. However, there is at least one known issue where a System V init script does not work with systemd out of the box: starting a service as a different user via su or sudo in init scripts will result in a failure of the script, producing an Access denied error.

When changing the user with su or sudo, a PAM session is started. This session will be terminated after the init script is finished. As a consequence, the service that has been started by the init script will also be terminated. To work around this error, proceed as follows:

  1. Create a service file wrapper with the same name as the init script plus the file name extension .service:

    [Unit]
    Description=DESCRIPTION
    After=network.target
    
    [Service]
    User=USER
    Type=forking1
    PIDFile=PATH TO PID FILE1
    ExecStart=PATH TO INIT SCRIPT start
    ExecStop=PATH TO INIT SCRIPT stop
    ExecStopPost=/usr/bin/rm -f PATH TO PID FILE1
    
    [Install]
    WantedBy=multi-user.target2

    Replace all values written in UPPERCASE LETTERS with appropriate values.

    1

    Optional—only use if the init script starts a daemon.

    2

    multi-user.target also starts the init script when booting into graphical.target. If it should only be started when booting into the display manager, user graphical.target here.

  2. Start the daemon with systemctl start APPLICATION.

10.4 Managing services with YaST Edit source

Basic service management can also be done with the YaST Services Manager module. It supports starting, stopping, enabling and disabling services. It also lets you show a service's status and change the default target. Start the YaST module with YaST › System › Services Manager.

Services Manager
Figure 10.1: Services Manager
Changing the Default system target

To change the target the system boots into, choose a target from the Default System Target drop-down box. The most often used targets are Graphical Interface (starting a graphical login screen) and Multi-User (starting the system in command line mode).

Starting or stopping a service

Select a service from the table. The State column shows whether it is currently running (Active) or not (Inactive). Toggle its status by choosing Start or Stop.

Starting or stopping a service changes its status for the currently running session. To change its status throughout a reboot, you need to enable or disable it.

Defining service start-up behavior

Services can either be started automatically at boot time or manually. Select a service from the table. The Start column shows whether it is currently started Manually or On Boot. Toggle its status by choosing Start Mode.

To change a service status in the current session, you need to start or stop it as described above.

View a status messages

To view the status message of a service, select it from the list and choose Show Details. The output you will see is identical to the one generated by the command systemctl -l status MY_SERVICE.

10.5 Customizing systemd Edit source

The following sections contain some examples for systemd customization.

Warning
Warning: Preventing your customization from being overwritten

When customizing systemd, always use the directory /etc/systemd/, never use /usr/lib/systemd/. Otherwise your changes will be overwritten by the next update of systemd.

10.5.1 Customizing unit files Edit source

The recommended way to customize unit files is to use the systemctl edit SERVICE command. This command starts the default text editor and creates a directory with the override.conf file in /etc/systemd/system/NAME.service.d/. The command also ensures that the running systemd process is notified about the changes.

Alternatively, you can open a copy of the original file for editing instead of a blank file by running systemctl edit --full SERVICE. When editing the file, make sure that you do not remove any of the existing sections.

As an exercise, change how long the system waits for MariaDB to start. As root, run systemctl edit --full mariadb.service. The file opened will look similar to the following:

[Unit]
Description=MySQL server
Wants=basic.target
Conflicts=mariadb.target
After=basic.target network.target

[Install]
WantedBy=multi-user.target
Alias=mysql.service

[Service]
Restart=on-abort
Type=notify
ExecStartPre=/usr/lib/mysql/mysql-systemd-helper  install
ExecStartPre=/usr/lib/mysql/mysql-systemd-helper  upgrade
ExecStart=/usr/lib/mysql/mysql-systemd-helper     start

# Configures the time to wait for start-up/stop
TimeoutSec=300

# Prevent writes to /usr, /boot, and /etc
ProtectSystem=full

# Prevent accessing /home, /root and /run/user
ProtectHome=true

UMask=007

Adjust the TimeoutSec value and save the changes. To enable the changes, as root, run systemctl daemon-reload.

For further information, refer to the man pages that can be evoked with the man 1 systemctl command.

10.5.2 Creating drop-in files Edit source

For minor changes of a configuration file, use so-called drop-in files. Drop-in files let you extend the configuration of unit files without having to edit or override the unit files themselves.

For example, to change a single value for the FOOBAR service located in /usr/lib/systemd/system/FOOBAR.SERVICE, proceed as follows:

  1. Create a directory called /etc/systemd/system/FOOBAR.service.d/.

    Note the .d suffix. The directory must otherwise be named like the service that you want to patch with the drop-in file.

  2. In that directory, create a file your_modification.conf.

    Make sure it only contains the line with the value that you want to modify.

  3. Save your changes to the file.

Note
Note: Avoiding name conflicts

To avoid name conflicts between your drop-in files and files shipped by SUSE, it is recommended to prefix all drop-in file names with a two-digit number and a dash: for example, 80-override.conf.

The following ranges are reserved:

  • 0-19 is reserved for systemd upstream

  • 20-25 is reserved for systemd shipped by SUSE

  • 26-29 is reserved for SUSE packages (other than systemd)

  • 50 is reserved for drop-in files created with systemctl set-property.

Use a two-digit number above this range to ensure that none of the drop-in files shipped by SUSE will override your own drop-in files.

You can use systemctl cat $UNIT to list and verify which files are taken into account in the units configuration.

10.5.3 Converting xinetd services to systemd Edit source

Since the release of openSUSE Leap 15, the xinetd infrastructure has been removed. This section outlines how to convert existing custom xinetd service files to systemd sockets.

For each xinetd service file, you need at least two systemd unit files: the socket file (*.socket) and an associated service file (*.service). The socket file tells systemd which socket to create, and the service file tells systemd which executable to start.

Consider the following example xinetd service file:

# cat /etc/xinetd.d/example
service example
{
  socket_type = stream
  protocol = tcp
  port = 10085
  wait = no
  user = user
  group = users
  groups = yes
  server = /usr/libexec/example/exampled
  server_args = -auth=bsdtcp exampledump
  disable = no
}

To convert it to systemd, you need the following two matching files:

# cat /usr/lib/systemd/system/example.socket
[Socket]
ListenStream=0.0.0.0:10085
Accept=false

[Install]
WantedBy=sockets.target
# cat /usr/lib/systemd/system/example.service
[Unit]
Description=example

[Service]
ExecStart=/usr/libexec/example/exampled -auth=bsdtcp exampledump
User=user
Group=users
StandardInput=socket

For a complete list of the systemd socket and service file options, refer to the systemd.socket and systemd.service manual pages (man 5 systemd.socket, man 5 systemd.service).

10.5.4 Creating custom targets Edit source

On System V init SUSE systems, runlevel 4 is unused to allow administrators to create their own runlevel configuration. systemd allows you to create any number of custom targets. It is suggested to start by adapting an existing target such as graphical.target.

  1. Copy the configuration file /usr/lib/systemd/system/graphical.target to /etc/systemd/system/MY_TARGET.target and adjust it according to your needs.

  2. The configuration file copied in the previous step already covers the required (hard) dependencies for the target. To also cover the wanted (soft) dependencies, create a directory /etc/systemd/system/MY_TARGET.target.wants.

  3. For each wanted service, create a symbolic link from /usr/lib/systemd/system into /etc/systemd/system/MY_TARGET.target.wants.

  4. When you have finished setting up the target, reload the systemd configuration to make the new target available:

    > sudo systemctl daemon-reload

10.6 Advanced usage Edit source

The following sections cover advanced topics for system administrators. For even more advanced systemd documentation, refer to Lennart Pöttering's series about systemd for administrators at http://0pointer.de/blog/projects.

10.6.1 Cleaning temporary directories Edit source

systemd supports cleaning temporary directories regularly. The configuration from the previous system version is automatically migrated and active. tmpfiles.d—which is responsible for managing temporary files—reads its configuration from /etc/tmpfiles.d/*.conf, /run/tmpfiles.d/*.conf, and /usr/lib/tmpfiles.d/*.conf files. Configuration placed in /etc/tmpfiles.d/*.conf overrides related configurations from the other two directories (/usr/lib/tmpfiles.d/*.conf is where packages store their configuration files).

The configuration format is one line per path containing action and path, and optionally mode, ownership, age and argument fields, depending on the action. The following example unlinks the X11 lock files:

Type Path               Mode UID  GID  Age Argument
r    /tmp/.X[0-9]*-lock

To get the status the tmpfile timer:

> sudo systemctl status systemd-tmpfiles-clean.timer
systemd-tmpfiles-clean.timer - Daily Cleanup of Temporary Directories
 Loaded: loaded (/usr/lib/systemd/system/systemd-tmpfiles-clean.timer; static)
 Active: active (waiting) since Tue 2018-04-09 15:30:36 CEST; 1 weeks 6 days ago
   Docs: man:tmpfiles.d(5)
         man:systemd-tmpfiles(8)

Apr 09 15:30:36 jupiter systemd[1]: Starting Daily Cleanup of Temporary Directories.
Apr 09 15:30:36 jupiter systemd[1]: Started Daily Cleanup of Temporary Directories.

For more information on temporary files handling, see man 5 tmpfiles.d.

10.6.2 System log Edit source

Section 10.6.9, “Debugging services” explains how to view log messages for a given service. However, displaying log messages is not restricted to service logs. You can also access and query the complete log messages written by systemd—the so-called Journal. Use the command journalctl to display the complete log messages starting with the oldest entries. Refer to man 1 journalctl for options such as applying filters or changing the output format.

10.6.3 Snapshots Edit source

You can save the current state of systemd to a named snapshot and later revert to it with the isolate subcommand. This is useful when testing services or custom targets, because it allows you to return to a defined state at any time. A snapshot is only available in the current session and will automatically be deleted on reboot. A snapshot name must end in .snapshot.

Create a snapshot
> sudo systemctl snapshot MY_SNAPSHOT.snapshot
Delete a snapshot
> sudo systemctl delete MY_SNAPSHOT.snapshot
View a snapshot
> sudo systemctl show MY_SNAPSHOT.snapshot
Activate a snapshot
> sudo systemctl isolate MY_SNAPSHOT.snapshot

10.6.4 Loading kernel modules Edit source

With systemd, kernel modules can automatically be loaded at boot time via a configuration file in /etc/modules-load.d. The file should be named MODULE.conf and have the following content:

# load module MODULE at boot time
MODULE

In case a package installs a configuration file for loading a kernel module, the file gets installed to /usr/lib/modules-load.d. If two configuration files with the same name exist, the one in /etc/modules-load.d tales precedence.

For more information, see the modules-load.d(5) man page.

10.6.5 Performing actions before loading a service Edit source

With System V init actions that need to be performed before loading a service, needed to be specified in /etc/init.d/before.local . This procedure is no longer supported with systemd. If you need to do actions before starting services, do the following:

Loading kernel modules

Create a drop-in file in /etc/modules-load.d directory (see man modules-load.d for the syntax)

Creating Files or Directories, Cleaning-up Directories, Changing Ownership

Create a drop-in file in /etc/tmpfiles.d (see man tmpfiles.d for the syntax)

Other tasks

Create a system service file, for example /etc/systemd/system/before.service, from the following template:

[Unit]
Before=NAME OF THE SERVICE YOU WANT THIS SERVICE TO BE STARTED BEFORE
[Service]
Type=oneshot
RemainAfterExit=true
ExecStart=YOUR_COMMAND
# beware, executable is run directly, not through a shell, check the man pages
# systemd.service and systemd.unit for full syntax
[Install]
# target in which to start the service
WantedBy=multi-user.target
#WantedBy=graphical.target

When the service file is created, you should run the following commands (as root):

> sudo systemctl daemon-reload
> sudo systemctl enable before

Every time you modify the service file, you need to run:

> sudo systemctl daemon-reload

10.6.6 Kernel control groups (cgroups) Edit source

On a traditional System V init system it is not always possible to clearly assign a process to the service that spawned it. Some services, such as Apache, spawn a lot of third-party processes (for example CGI or Java processes), which themselves spawn more processes. This makes a clear assignment difficult or even impossible. Additionally, a service may not finish correctly, leaving certain children alive.

systemd solves this problem by placing each service into its own cgroup. cgroups are a kernel feature that allows aggregating processes and all their children into hierarchical organized groups. systemd names each cgroup after its service. Since a non-privileged process is not allowed to leave its cgroup, this provides an effective way to label all processes spawned by a service with the name of the service.

To list all processes belonging to a service, use the command systemd-cgls. The result will look like the following (shortened) example:

Example 10.3: List all processes belonging to a service
# systemd-cgls --no-pager
├─1 /usr/lib/systemd/systemd --switched-root --system --deserialize 20
├─user.slice
│ └─user-1000.slice
│   ├─session-102.scope
│   │ ├─12426 gdm-session-worker [pam/gdm-password]
│   │ ├─15831 gdm-session-worker [pam/gdm-password]
│   │ ├─15839 gdm-session-worker [pam/gdm-password]
│   │ ├─15858 /usr/lib/gnome-terminal-server

[...]

└─system.slice
  ├─systemd-hostnamed.service
  │ └─17616 /usr/lib/systemd/systemd-hostnamed
  ├─cron.service
  │ └─1689 /usr/sbin/cron -n
  ├─postfix.service
  │ ├─ 1676 /usr/lib/postfix/master -w
  │ ├─ 1679 qmgr -l -t fifo -u
  │ └─15590 pickup -l -t fifo -u
  ├─sshd.service
  │ └─1436 /usr/sbin/sshd -D

[...]

See Book “System Analysis and Tuning Guide”, Chapter 9 “Kernel control groups” for more information about cgroups.

10.6.7 Terminating services (sending signals) Edit source

As explained in Section 10.6.6, “Kernel control groups (cgroups)”, it is not always possible to assign a process to its parent service process in a System V init system. This makes it difficult to stop a service and its children. Child processes that have not been terminated remain as zombie processes.

systemd's concept of confining each service into a cgroup makes it possible to identify all child processes of a service and therefore allows you to send a signal to each of these processes. Use systemctl kill to send signals to services. For a list of available signals refer to man 7 signals.

Sending SIGTERM to a service

SIGTERM is the default signal that is sent.

> sudo systemctl kill MY_SERVICE
Sending SIGNAL to a service

Use the -s option to specify the signal that should be sent.

> sudo systemctl kill -s SIGNAL MY_SERVICE
Selecting processes

By default the kill command sends the signal to all processes of the specified cgroup. You can restrict it to the control or the main process. The latter is for example useful to force a service to reload its configuration by sending SIGHUP:

> sudo systemctl kill -s SIGHUP --kill-who=main MY_SERVICE

10.6.8 Important notes on the D-Bus service Edit source

The D-Bus service is the message bus for communication between systemd clients and the systemd manager that is running as pid 1. Even though dbus is a stand-alone daemon, it is an integral part of the init infrastructure.

Terminating dbus or restarting it in the running system is similar to an attempt to terminate or restart pid 1. It will break systemd client/server communication and make most systemd functions unusable.

Therefore, terminating or restarting dbus is neither recommended nor supported.

Updating the dbus or dbus-related packages requires a reboot. When in doubt whether a reboot is necessary, run the sudo zypper ps -s. If dbus appears among the listed services, you need to reboot the system.

Keep in mind that dbus is updated even when automatic updates are configured to skip the packages that require reboot.

10.6.9 Debugging services Edit source

By default, systemd is not overly verbose. If a service was started successfully, no output will be produced. In case of a failure, a short error message will be displayed. However, systemctl status provides means to debug start-up and operation of a service.

systemd comes with its own logging mechanism (The Journal) that logs system messages. This allows you to display the service messages together with status messages. The status command works similar to tail and can also display the log messages in different formats, making it a powerful debugging tool.

Show service start-up failure

Whenever a service fails to start, use systemctl status MY_SERVICE to get a detailed error message:

# systemctl start apache2
Job failed. See system journal and 'systemctl status' for details.
# systemctl status apache2
   Loaded: loaded (/usr/lib/systemd/system/apache2.service; disabled)
   Active: failed (Result: exit-code) since Mon, 04 Apr 2018 16:52:26 +0200; 29s ago
   Process: 3088 ExecStart=/usr/sbin/start_apache2 -D SYSTEMD -k start (code=exited, status=1/FAILURE)
   CGroup: name=systemd:/system/apache2.service

Apr 04 16:52:26 g144 start_apache2[3088]: httpd2-prefork: Syntax error on line
205 of /etc/apache2/httpd.conf: Syntax error on li...alHost>
Show last N service messages

The default behavior of the status subcommand is to display the last ten messages a service issued. To change the number of messages to show, use the --lines=N parameter:

> sudo systemctl status chronyd
> sudo systemctl --lines=20 status chronyd
Show service messages in append mode

To display a live stream of service messages, use the --follow option, which works like tail -f:

> sudo systemctl --follow status chronyd
Messages output format

The --output=MODE parameter allows you to change the output format of service messages. The most important modes available are:

short

The default format. Shows the log messages with a human readable time stamp.

verbose

Full output with all fields.

cat

Terse output without time stamps.

10.7 systemd timer units Edit source

Similar to cron, systemd timer units provide a mechanism for scheduling jobs on Linux. Although systemd timer units serve the same purpose as cron, they offer several advantages.

  • Jobs scheduled using a timer unit can depend on other systemd services.

  • Timer units are treated as regular systemd services, so can be managed with systemctl.

  • Timers can be realtime and monotonic.

  • Time units are logged to the systemd journal, which makes it easier to monitor and troubleshoot them.

systemd timer units are identified by the .timer file name extension.

10.7.1 systemd timer types Edit source

Timer units can use monotonic and realtime timers.

  • Similar to cronjobs, realtime timers are triggered on calendar events. Realtime timers are defined using the option OnCalendar.

  • Monotonic timers are triggered at a specified time elapsed from a certain starting point. The latter could be a system boot or system unit activation event. There are several options for defining monotonic timers including OnBootSec, OnUnitActiveSec, and OnTypeSec. Monotonic timers are not persistent, and they are reset after each reboot.

10.7.2 systemd timers and service units Edit source

Every timer unit must have a corresponding systemd unit file it controls. In other words, a .timer file activates and manages the corresponding .service file. When used with a timer, the .service file does not require an [Install] section, as the service is managed by the timer.

10.7.3 Practical example Edit source

To understand the basics of systemd timer units, we set up a timer that triggers the foo.sh shell script.

First step is to create a systemd service unit that controls the shell script. To do this, open a new text file for editing and add the following service unit definition:

[Unit]
Description="Foo shell script"

[Service]
ExecStart=/usr/local/bin/foo.sh

Save the file under the name foo.service in the directory /etc/systemd/system/.

Next, open a new text file for editing and add the following timer definition:

[Unit]
Description="Run foo shell script"

[Timer]
OnBootSec=5min
OnUnitActiveSec=24h
Unit=foo.service

[Install]
WantedBy=multi-user.target

The [Timer] section in the example above specifies what service to trigger (foo.service) and when to trigger it. In this case, the option OnBootSec specifies a monotonic timer that triggers the service five minutes after the system boot, while the option OnUnitActiveSec triggers the service 24 hours after the service has been activated (that is, the timer will trigger the service once a day). Finally the option WantedBy specifies that the timer should start when the system has reached the multi-user target.

Instead of a monotonic timer, you can specify a realtime one using the option OnCalendar. The following realtime timer definition triggers the related service unit once a week, starting on Monday at 12:00.

[Timer]
OnCalendar=weekly
Persistent=true

The option Persistent=true indicates that the service will be triggered immediately after the timer activation if the timer missed the last start time (for example, because of the system being powered off).

The option OnCalendar can also be used to define specific dates times for triggering a service using the following format: DayOfWeek Year-Month-Day Hour:Minute:Second. The example below triggers a service at 5am every day:

OnCalendar=*-*-* 5:00:00

You can use an asterisk to specify any value, and commas to list possible values. Use two values separated by .. to indicate a contiguous range. The following example triggers a service at 6pm on Friday of every month:

OnCalendar=Fri *-*-1..7 18:00:00

To trigger a service at different times, you can specify several OnCalendar entries:

OnCalendar=Mon..Fri 10:00
OnCalendar=Sat,Sun 22:00

In the example above, a service is triggered at 10am on week days and at 10pm on weekends.

When you are done editing the timer unit file, save it under the name foo.timer in the /etc/systemd/system/ directory. To check the correctness of the created unit files, run the following command:

> sudo  systemd-analyze verify /etc/systemd/system/foo.*

If the command returns no output, the files have passed the verification successfully.

To start the timer, use the command sudo systemctl start foo.timer. To enable the timer on boot, run the command sudo systemctl enable foo.timer.

10.7.4 Managing systemd timers Edit source

Since timers are treated as regular systemd units, you can manage them using systemctl. You can start a timer with systemctl start, enable a timer with systemctl enable, and so on. Additionally, you can list all active timers using the command systemctl list-timers. To list all timers, including inactive ones, run the command systemctl list-timers --all.

10.8 More information Edit source

For more information on systemd refer to the following online resources:

Homepage

http://www.freedesktop.org/wiki/Software/systemd

systemd for administrators

Lennart Pöttering, one of the systemd authors, has written a series of blog entries (13 at the time of writing this chapter). Find them at http://0pointer.de/blog/projects.

11 journalctl: query the systemd journal Edit source

systemd features its own logging system called journal. There is no need to run a syslog-based service, as all system events are written to the journal.

The journal itself is a system service managed by systemd. Its full name is systemd-journald.service. It collects and stores logging data by maintaining structured indexed journals based on logging information received from the kernel, user processes, standard input, and system service errors. The systemd-journald service is on by default:

> sudo systemctl status systemd-journald
systemd-journald.service - Journal Service
   Loaded: loaded (/usr/lib/systemd/system/systemd-journald.service; static)
   Active: active (running) since Mon 2014-05-26 08:36:59 EDT; 3 days ago
     Docs: man:systemd-journald.service(8)
           man:journald.conf(5)
 Main PID: 413 (systemd-journal)
   Status: "Processing requests..."
   CGroup: /system.slice/systemd-journald.service
           └─413 /usr/lib/systemd/systemd-journald
[...]

11.1 Making the journal persistent Edit source

The journal stores log data in /run/log/journal/ by default. Because the /run/ directory is volatile by nature, log data is lost at reboot. To make the log data persistent, create the directory /var/log/journal/ and make sure it has the correct access modes and ownership, so the systemd-journald service can store its data. To switch to persistent logging, execute the following commands:

> sudo  mkdir /var/log/journal
> sudo  systemd-tmpfiles --create --prefix=/var/log/journal
> sudo  journalctl --flush

Any log data stored in /run/log/journal/ will be flushed into /var/log/journal/.

11.2 journalctl: useful switches Edit source

This section introduces several common useful options to enhance the default journalctl behavior. All switches are described in the journalctl manual page, man 1 journalctl.

Tip
Tip: Messages related to a specific executable

To show all journal messages related to a specific executable, specify the full path to the executable:

> sudo journalctl /usr/lib/systemd/systemd
-f

Shows only the most recent journal messages, and prints new log entries as they are added to the journal.

Prints the messages and jumps to the end of the journal, so that the latest entries are visible within the pager.

-r

Prints the messages of the journal in reverse order, so that the latest entries are listed first.

-k

Shows only kernel messages. This is equivalent to the field match _TRANSPORT=kernel (see Section 11.3.3, “Filtering based on fields”).

-u

Shows only messages for the specified systemd unit. This is equivalent to the field match _SYSTEMD_UNIT=UNIT (see Section 11.3.3, “Filtering based on fields”).

> sudo journalctl -u apache2
[...]
Jun 03 10:07:11 pinkiepie systemd[1]: Starting The Apache Webserver...
Jun 03 10:07:12 pinkiepie systemd[1]: Started The Apache Webserver.

11.3 Filtering the journal output Edit source

When called without switches, journalctl shows the full content of the journal, the oldest entries listed first. The output can be filtered by specific switches and fields.

11.3.1 Filtering based on a boot number Edit source

journalctl can filter messages based on a specific system boot. To list all available boots, run

> sudo journalctl --list-boots
-1 097ed2cd99124a2391d2cffab1b566f0 Mon 2014-05-26 08:36:56 EDT—Fri 2014-05-30 05:33:44 EDT
 0 156019a44a774a0bb0148a92df4af81b Fri 2014-05-30 05:34:09 EDT—Fri 2014-05-30 06:15:01 EDT

The first column lists the boot offset: 0 for the current boot, -1 for the previous one, -2 for the one before that, etc. The second column contains the boot ID followed by the limiting time stamps of the specific boot.

Show all messages from the current boot:

> sudo journalctl -b

If you need to see journal messages from the previous boot, add an offset parameter. The following example outputs the previous boot messages:

> sudo journalctl -b -1

Another way is to list boot messages based on the boot ID. For this purpose, use the _BOOT_ID field:

> sudo journalctl _BOOT_ID=156019a44a774a0bb0148a92df4af81b

11.3.2 Filtering based on time interval Edit source

You can filter the output of journalctl by specifying the starting and/or ending date. The date specification should be of the format "2014-06-30 9:17:16". If the time part is omitted, midnight is assumed. If seconds are omitted, ":00" is assumed. If the date part is omitted, the current day is assumed. Instead of numeric expression, you can specify the keywords "yesterday", "today", or "tomorrow". They refer to midnight of the day before the current day, of the current day, or of the day after the current day. If you specify "now", it refers to the current time. You can also specify relative times prefixed with - or +, referring to times before or after the current time.

Show only new messages since now, and update the output continuously:

> sudo journalctl --since "now" -f

Show all messages since last midnight till 3:20am:

> sudo journalctl --since "today" --until "3:20"

11.3.3 Filtering based on fields Edit source

You can filter the output of the journal by specific fields. The syntax of a field to be matched is FIELD_NAME=MATCHED_VALUE, such as _SYSTEMD_UNIT=httpd.service. You can specify multiple matches in a single query to filter the output messages even more. See man 7 systemd.journal-fields for a list of default fields.

Show messages produced by a specific process ID:

> sudo journalctl _PID=1039

Show messages belonging to a specific user ID:

# journalctl _UID=1000

Show messages from the kernel ring buffer (the same as dmesg produces):

> sudo journalctl _TRANSPORT=kernel

Show messages from the service's standard or error output:

> sudo journalctl _TRANSPORT=stdout

Show messages produced by a specified service only:

> sudo journalctl _SYSTEMD_UNIT=avahi-daemon.service

If two different fields are specified, only entries that match both expressions at the same time are shown:

> sudo journalctl _SYSTEMD_UNIT=avahi-daemon.service _PID=1488

If two matches refer to the same field, all entries matching either expression are shown:

> sudo journalctl _SYSTEMD_UNIT=avahi-daemon.service _SYSTEMD_UNIT=dbus.service

You can use the '+' separator to combine two expressions in a logical 'OR'. The following example shows all messages from the Avahi service process with the process ID 1480 together with all messages from the D-Bus service:

> sudo journalctl _SYSTEMD_UNIT=avahi-daemon.service _PID=1480 + _SYSTEMD_UNIT=dbus.service

11.4 Investigating systemd errors Edit source

This section introduces a simple example to illustrate how to find and fix the error reported by systemd during apache2 start-up.

  1. Try to start the apache2 service:

    # systemctl start apache2
    Job for apache2.service failed. See 'systemctl status apache2' and 'journalctl -xn' for details.
  2. Let us see what the service's status says:

    > sudo systemctl status apache2
    apache2.service - The Apache Webserver
       Loaded: loaded (/usr/lib/systemd/system/apache2.service; disabled)
       Active: failed (Result: exit-code) since Tue 2014-06-03 11:08:13 CEST; 7min ago
      Process: 11026 ExecStop=/usr/sbin/start_apache2 -D SYSTEMD -DFOREGROUND \
               -k graceful-stop (code=exited, status=1/FAILURE)

    The ID of the process causing the failure is 11026.

  3. Show the verbose version of messages related to process ID 11026:

    > sudo journalctl -o verbose _PID=11026
    [...]
    MESSAGE=AH00526: Syntax error on line 6 of /etc/apache2/default-server.conf:
    [...]
    MESSAGE=Invalid command 'DocumenttRoot', perhaps misspelled or defined by a module
    [...]
  4. Fix the typo inside /etc/apache2/default-server.conf, start the apache2 service, and print its status:

    > sudo systemctl start apache2 && systemctl status apache2
    apache2.service - The Apache Webserver
       Loaded: loaded (/usr/lib/systemd/system/apache2.service; disabled)
       Active: active (running) since Tue 2014-06-03 11:26:24 CEST; 4ms ago
      Process: 11026 ExecStop=/usr/sbin/start_apache2 -D SYSTEMD -DFOREGROUND
               -k graceful-stop (code=exited, status=1/FAILURE)
     Main PID: 11263 (httpd2-prefork)
       Status: "Processing requests..."
       CGroup: /system.slice/apache2.service
               ├─11263 /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf -D [...]
               ├─11280 /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf -D [...]
               ├─11281 /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf -D [...]
               ├─11282 /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf -D [...]
               ├─11283 /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf -D [...]
               └─11285 /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf -D [...]

11.5 Journald configuration Edit source

The behavior of the systemd-journald service can be adjusted by modifying /etc/systemd/journald.conf. This section introduces only basic option settings. For a complete file description, see man 5 journald.conf. You need to restart the journal for the changes to take effect with

> sudo systemctl restart systemd-journald

11.5.1 Changing the journal size limit Edit source

If the journal log data is saved to a persistent location (see Section 11.1, “Making the journal persistent”), it uses up to 10% of the file system the /var/log/journal resides on. For example, if /var/log/journal is located on a 30 GB /var partition, the journal may use up to 3 GB of the disk space. To change this limit, change (and uncomment) the SystemMaxUse option:

SystemMaxUse=50M

11.5.2 Forwarding the journal to /dev/ttyX Edit source

You can forward the journal to a terminal device to inform you about system messages on a preferred terminal screen, for example /dev/tty12. Change the following journald options to

ForwardToConsole=yes
TTYPath=/dev/tty12

11.5.3 Forwarding the journal to syslog facility Edit source

Journald is backward compatible with traditional syslog implementations such as rsyslog. Make sure the following is valid:

  • rsyslog is installed.

    > sudo rpm -q rsyslog
    rsyslog-7.4.8-2.16.x86_64
  • rsyslog service is enabled.

    > sudo systemctl is-enabled rsyslog
    enabled
  • Forwarding to syslog is enabled in /etc/systemd/journald.conf.

    ForwardToSyslog=yes

11.6 Using YaST to filter the systemd journal Edit source

For an easy way of filtering the systemd journal (without dealing with the journalctl syntax), you can use the YaST journal module. After installing it with sudo zypper in yast2-journal, start it from YaST by selecting System › Systemd Journal. Alternatively, start it from command line by entering sudo yast2 journal.

YaST systemd journal
Figure 11.1: YaST systemd journal

The module displays the log entries in a table. The search box on top allows you to search for entries that contain certain characters, similar to using grep. To filter the entries by date and time, unit, file or priority, click Change filters and set the respective options.

11.7 Viewing logs in GNOME Edit source

You can view the journal with GNOME Logs. Start it from the application menu. To view system log messages, it needs to be run as root, for example with xdg-su gnome-logs. This command can be executed when pressing AltF2.

12 The boot loader GRUB 2 Edit source

Abstract

This chapter describes how to configure GRUB 2, the boot loader used in openSUSE® Leap. A YaST module is available for configuring the most important settings. The boot procedure as a whole is outlined in Chapter 9, Introduction to the boot process. For details on Secure Boot support for UEFI machines, see Chapter 14, UEFI (Unified Extensible Firmware Interface).

12.1 Main differences between GRUB legacy and GRUB 2 Edit source

  • The configuration is stored in different files.

  • More file systems are supported (for example, Btrfs).

  • Can directly read files stored on LVM or RAID devices.

  • The user interface can be translated and altered with themes.

  • Includes a mechanism for loading modules to support additional features, such as file systems, etc.

  • Automatically searches for and generates boot entries for other kernels and operating systems, such as Windows.

  • Includes a minimal Bash-like console.

12.2 Configuration file structure Edit source

The configuration of GRUB 2 is based on the following files:

/boot/grub2/grub.cfg

This file contains the configuration of the GRUB 2 menu items. It replaces menu.lst used in GRUB Legacy. grub.cfg should not be edited—it is automatically generated by the command grub2-mkconfig -o /boot/grub2/grub.cfg.

/boot/grub2/custom.cfg

This optional file is directly sourced by grub.cfg at boot time and can be used to add custom items to the boot menu. Starting with openSUSE Leap Leap 42.2 these entries will also be parsed when using grub-once.

/etc/default/grub

This file controls the user settings of GRUB 2 and normally includes additional environmental settings such as backgrounds and themes.

Scripts under /etc/grub.d/

The scripts in this directory are read during execution of the command grub2-mkconfig -o /boot/grub2/grub.cfg. Their instructions are integrated into the main configuration file /boot/grub/grub.cfg.

/etc/sysconfig/bootloader

This configuration file holds certain basic settings like the boot loader type and whether to enable UEFI Secure Boot support.

/boot/grub2/x86_64-efi,

These configuration files contain architecture-specific options.

GRUB 2 can be controlled in multiple ways. Boot entries from an existing configuration can be selected from the graphical menu (splash screen). The configuration is loaded from the file /boot/grub2/grub.cfg which is compiled from other configuration files (see below). All GRUB 2 configuration files are considered system files, and you need root privileges to edit them.

Note
Note: Activating configuration changes

After having manually edited GRUB 2 configuration files, you need to run grub2-mkconfig -o /boot/grub2/grub.cfg to activate the changes. However, this is not necessary when changing the configuration with YaST, because YaST will automatically run this command.

12.2.1 The file /boot/grub2/grub.cfg Edit source

The graphical splash screen with the boot menu is based on the GRUB 2 configuration file /boot/grub2/grub.cfg, which contains information about all partitions or operating systems that can be booted by the menu.

Every time the system is booted, GRUB 2 loads the menu file directly from the file system. For this reason, GRUB 2 does not need to be re-installed after changes to the configuration file. grub.cfg is automatically rebuilt with kernel installations or removals.

grub.cfg is compiled from the file /etc/default/grub and scripts found in the /etc/grub.d/ directory when running the command grub2-mkconfig -o /boot/grub2/grub.cfg. Therefore you should never edit the file manually. Instead, edit the related source files or use the YaST Boot Loader module to modify the configuration as described in Section 12.3, “Configuring the boot loader with YaST”.

12.2.2 The file /etc/default/grub Edit source

More general options of GRUB 2 belong here, such as the time the menu is displayed, or the default OS to boot. To list all available options, see the output of the following command:

> grep "export GRUB_DEFAULT" -A50 /usr/sbin/grub2-mkconfig | grep GRUB_

In addition to already defined variables, the user may introduce their own variables, and use them later in the scripts found in the /etc/grub.d directory.

After having edited /etc/default/grub, update the main configuration file with grub2-mkconfig -o /boot/grub2/grub.cfg.

Note
Note: Scope

All options set in this file are general options that affect all boot entries. Specific options for Xen kernels or the Xen hypervisor can be set via the GRUB_*_XEN_* configuration options. See below for details.

GRUB_DEFAULT

Sets the boot menu entry that is booted by default. Its value can be a numeric value, the complete name of a menu entry, or saved.

GRUB_DEFAULT=2 boots the third (counted from zero) boot menu entry.

GRUB_DEFAULT="2>0" boots the first submenu entry of the third top-level menu entry.

GRUB_DEFAULT="Example boot menu entry" boots the menu entry with the title Example boot menu entry.

GRUB_DEFAULT=saved boots the entry specified by the grub2-once or grub2-set-default commands. While grub2-reboot sets the default boot entry for the next reboot only, grub2-set-default sets the default boot entry until changed. grub2-editenv list lists the next boot entry.

GRUB_HIDDEN_TIMEOUT

Waits the specified number of seconds for the user to press a key. During the period no menu is shown unless the user presses a key. If no key is pressed during the time specified, the control is passed to GRUB_TIMEOUT. GRUB_HIDDEN_TIMEOUT=0 first checks whether Shift is pressed and shows the boot menu if yes, otherwise immediately boots the default menu entry. This is the default when only one bootable OS is identified by GRUB 2.

GRUB_HIDDEN_TIMEOUT_QUIET

If false is specified, a countdown timer is displayed on a blank screen when the GRUB_HIDDEN_TIMEOUT feature is active.

GRUB_TIMEOUT

Time period in seconds the boot menu is displayed before automatically booting the default boot entry. If you press a key, the timeout is cancelled and GRUB 2 waits for you to make the selection manually. GRUB_TIMEOUT=-1 will cause the menu to be displayed until you select the boot entry manually.

GRUB_CMDLINE_LINUX

Entries on this line are added at the end of the boot entries for normal and recovery mode. Use it to add kernel parameters to the boot entry.

GRUB_CMDLINE_LINUX_DEFAULT

Same as GRUB_CMDLINE_LINUX but the entries are appended in the normal mode only.

GRUB_CMDLINE_LINUX_RECOVERY

Same as GRUB_CMDLINE_LINUX but the entries are appended in the recovery mode only.

GRUB_CMDLINE_LINUX_XEN_REPLACE

This entry replaces the GRUB_CMDLINE_LINUX parameters for all Xen boot entries.

GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT

Same as GRUB_CMDLINE_LINUX_XEN_REPLACE but it will only replace parameters ofGRUB_CMDLINE_LINUX_DEFAULT.

GRUB_CMDLINE_XEN

This entry specifies the kernel parameters for the Xen guest kernel only—the operation principle is the same as for GRUB_CMDLINE_LINUX.

GRUB_CMDLINE_XEN_DEFAULT

Same as GRUB_CMDLINE_XEN—the operation principle is the same as for GRUB_CMDLINE_LINUX_DEFAULT.

GRUB_TERMINAL

Enables and specifies an input/output terminal device. Can be console (PC BIOS and EFI consoles), serial (serial terminal), ofconsole (Open Firmware console), or the default gfxterm (graphics-mode output). It is also possible to enable more than one device by quoting the required options, for example GRUB_TERMINAL="console serial".

GRUB_GFXMODE

The resolution used for the gfxterm graphical terminal. You can only use modes supported by your graphics card (VBE). The default is ‘auto’, which tries to select a preferred resolution. You can display the screen resolutions available to GRUB 2 by typing videoinfo in the GRUB 2 command line. The command line is accessed by typing C when the GRUB 2 boot menu screen is displayed.

You can also specify a color depth by appending it to the resolution setting, for example GRUB_GFXMODE=1280x1024x24.

GRUB_BACKGROUND

Set a background image for the gfxterm graphical terminal. The image must be a file readable by GRUB 2 at boot time, and it must end with the .png, .tga, .jpg, or .jpeg suffix. If necessary, the image will be scaled to fit the screen.

GRUB_DISABLE_OS_PROBER

If this option is set to true, automatic searching for other operating systems is disabled. Only the kernel images in /boot/ and the options from your own scripts in /etc/grub.d/ are detected.

SUSE_BTRFS_SNAPSHOT_BOOTING

If this option is set to true, GRUB 2 can boot directly into Snapper snapshots. For more information, see Section 3.3, “System rollback by booting from snapshots”.

For a complete list of options, see the GNU GRUB manual.

12.2.3 Scripts in /etc/grub.d Edit source

The scripts in this directory are read during execution of the command grub2-mkconfig -o /boot/grub2/grub.cfg. Their instructions are incorporated into /boot/grub2/grub.cfg. The order of menu items in grub.cfg is determined by the order in which the files in this directory are run. Files with a leading numeral are executed first, beginning with the lowest number. 00_header is run before 10_linux, which would run before 40_custom. If files with alphabetic names are present, they are executed after the numerically named files. Only executable files generate output to grub.cfg during execution of grub2-mkconfig. By default all files in the /etc/grub.d directory are executable.

Tip
Tip: Persistent custom content in grub.cfg

Because /boot/grub2/grub.cfg is recompiled each time grub2-mkconfig is run, any custom content is lost. To insert your lines directly into /boot/grub2/grub.cfg without losing them after grub2-mkconfig is run, insert them between

### BEGIN /etc/grub.d/90_persistent ###

and

### END /etc/grub.d/90_persistent ###

The 90_persistent script ensures that such content will be preserved.

A list of the most important scripts follows:

00_header

Sets environmental variables such as system file locations, display settings, themes, and previously saved entries. It also imports preferences stored in the /etc/default/grub. Normally you do not need to make changes to this file.

10_linux

Identifies Linux kernels on the root device and creates relevant menu entries. This includes the associated recovery mode option if enabled. Only the latest kernel is displayed on the main menu page, with additional kernels included in a submenu.

30_os-prober

This script uses os-prober to search for Linux and other operating systems and places the results in the GRUB 2 menu. There are sections to identify specific other operating systems, such as Windows or macOS.

40_custom

This file provides a simple way to include custom boot entries into grub.cfg. Make sure that you do not change the exec tail -n +3 $0 part at the beginning.

The processing sequence is set by the preceding numbers with the lowest number being executed first. If scripts are preceded by the same number the alphabetical order of the complete name decides the order.

Tip
Tip: /boot/grub2/custom.cfg

If you create /boot/grub2/custom.cfg and fill it with content, it will be automatically included into /boot/grub2/grub.cfg right after 40_custom at boot time.

12.2.4 Mapping between BIOS drives and Linux devices Edit source

In GRUB Legacy, the device.map configuration file was used to derive Linux device names from BIOS drive numbers. The mapping between BIOS drives and Linux devices cannot always be guessed correctly. For example, GRUB Legacy would get a wrong order if the boot sequence of IDE and SCSI drives is exchanged in the BIOS configuration.

GRUB 2 avoids this problem by using device ID strings (UUIDs) or file system labels when generating grub.cfg. GRUB 2 utilities create a temporary device map on the fly, which is normally sufficient, particularly for single-disk systems.

However, if you need to override the GRUB 2's automatic device mapping mechanism, create your custom mapping file /boot/grub2/device.map. The following example changes the mapping to make DISK 3 the boot disk. Note that GRUB 2 partition numbers start with 1 and not with 0 as in GRUB Legacy.

(hd1)  /dev/disk-by-id/DISK3 ID
(hd2)  /dev/disk-by-id/DISK1 ID
(hd3)  /dev/disk-by-id/DISK2 ID

12.2.5 Editing menu entries during the boot procedure Edit source

Being able to directly edit menu entries is useful when the system does not boot anymore because of a faulty configuration. It can also be used to test new settings without altering the system configuration.

  1. In the graphical boot menu, select the entry you want to edit with the arrow keys.

  2. Press E to open the text-based editor.

  3. Use the arrow keys to move to the line you want to edit.

    GRUB 2 boot editor
    Figure 12.1: GRUB 2 boot editor

    Now you have two options:

    1. Add space-separated parameters to the end of the line starting with linux or linuxefi to edit the kernel parameters. A complete list of parameters is available at https://en.opensuse.org/Linuxrc.

    2. Or edit the general options to change for example the kernel version. The →| key suggests all possible completions.

  4. Press F10 to boot the system with the changes you made or press Esc to discard your edits and return to the GRUB 2 menu.

Changes made this way only apply to the current boot process and are not saved permanently.

Important
Important: Keyboard layout during the boot procedure

The US keyboard layout is the only one available when booting. See Book “Start-Up”, Chapter 4 “Troubleshooting”, Section 4.3 “Booting from installation media fails”, US keyboard layout.

Note
Note: Boot loader on the installation media

The Boot Loader of the installation media on systems with a traditional BIOS is still GRUB Legacy. To add boot parameters, select an entry and start typing. Additions you make to the installation boot entry will be permanently saved in the installed system.

12.2.6 Setting a boot password Edit source

Even before the operating system is booted, GRUB 2 enables access to file systems. Users without root permissions can access files in your Linux system to which they have no access after the system is booted. To block this kind of access or to prevent users from booting certain menu entries, set a boot password.

Important
Important: Booting requires a password

If set, the boot password is required on every boot, which means the system does not boot automatically.

Proceed as follows to set a boot password. Alternatively use YaST (Protect Boot Loader with Password ).

  1. Encrypt the password using grub2-mkpasswd-pbkdf2:

    > sudo grub2-mkpasswd-pbkdf2
    Password: ****
    Reenter password: ****
    PBKDF2 hash of your password is grub.pbkdf2.sha512.10000.9CA4611006FE96BC77A...
  2. Paste the resulting string into the file /etc/grub.d/40_custom together with the set superusers command.

    set superusers="root"
    password_pbkdf2 root grub.pbkdf2.sha512.10000.9CA4611006FE96BC77A...
  3. To import the changes into the main configuration file, run:

    > sudo grub2-mkconfig -o /boot/grub2/grub.cfg

After you reboot, you will be prompted for a user name and a password when trying to boot a menu entry. Enter root and the password you typed during the grub2-mkpasswd-pbkdf2 command. If the credentials are correct, the system will boot the selected boot entry.

For more information, see https://www.gnu.org/software/grub/manual/grub.html#Security.

12.2.7 Authorized access to boot menu entries Edit source

You can configure GRUB 2 to allow access to boot menu entries depending on the level of authorization. You can configure multiple user accounts protected with passwords and assign them access to different menu entries. To configure authorization in GRUB 2, follow these steps:

  1. Create and encrypt one password for each user account you want to use in GRUB 2. Use the grub2-mkpasswd-pbkdf2 command as described in Section 12.2.6, “Setting a boot password”.

  2. Delete the file /etc/grub.d/10_linux. This prevents outputting the default GRUB 2 menu entries.

  3. Edit the /boot/grub2/custom.cfg file and add custom menu entries manually. The following template is an example, adjust it to better match your use case:

    set superusers=admin
    password admin ADMIN_PASSWORD
    password maintainer MAINTAINER_PASSWORD
    
    menuentry 'Operational mode' {
      insmod ext2
      set root=hd0,1
      echo 'Loading Linux ...'
      linux /boot/vmlinuz root=/dev/vda1 $GRUB_CMDLINE_LINUX_DEFAULT $GRUB_CMDLINE_LINUX mode=operation
      echo 'Loading Initrd ...'
      initrd /boot/initrd
    }
    
    menuentry 'Maintenance mode' --users maintainer {
      insmod ext2
      set root=hd0,1
      echo 'Loading Linux ...'
      linux /boot/vmlinuz root=/dev/vda1 $GRUB_CMDLINE_LINUX_DEFAULT $GRUB_CMDLINE_LINUX mode=maintenance
      echo 'Loading Initrd ...'
      initrd /boot/initrd
    }
  4. Import the changes into the main configuration file:

    > sudo grub2-mkconfig -o /boot/grub2/grub.cfg

In the above example:

  • The GRUB 2 menu has two entries, Operational mode and Maintenance mode.

  • If no user is specified, both boot menu entries are accessible, but no one can access GRUB 2 command line or edit existing menu entries.

  • admin user can access GRUB 2 command line and edit existing menu entries.

  • maintenance user can select the recovery menu item.

12.3 Configuring the boot loader with YaST Edit source

The easiest way to configure general options of the boot loader in your openSUSE Leap system is to use the YaST module. In the YaST Control Center, select System › Boot Loader. The module shows the current boot loader configuration of your system and allows you to make changes.

Use the Boot Code Options tab to view and change settings related to type, location and advanced loader settings. You can choose whether to use GRUB 2 in standard or EFI mode.

Important
Important: EFI systems require GRUB2-EFI

If you have an EFI system you can only install GRUB2-EFI, otherwise your system is no longer bootable.

Important
Important: Reinstalling the boot loader

To reinstall the boot loader, make sure to change a setting in YaST and then change it back. For example, to reinstall GRUB2-EFI, select GRUB2 first and then immediately switch back to GRUB2-EFI.

Otherwise, the boot loader may only be partially reinstalled.

Note
Note: Custom boot loader

To use a boot loader other than the ones listed, select Do Not Install Any Boot Loader. Read the documentation of your boot loader carefully before choosing this option.

12.3.1 Boot loader location and boot code options Edit source

The default location of the boot loader depends on the partition setup and is either the Master Boot Record (MBR) or the boot sector of the / partition. To modify the location of the boot loader, follow these steps:

Procedure 12.1: Changing the boot loader location
  1. Select the Boot Code Options tab and then choose one of the following options for Boot Loader Location:

    Boot from Master Boot Record

    This installs the boot loader in the MBR of the disk containing the directory /boot. Usually this will be the disk mounted to /, but if /boot is mounted to a separate partition on a different disk, the MBR of that disk will be used.

    Boot from Root Partition

    This installs the boot loader in the boot sector of the / partition.

    Custom Root Partition

    Use this option to specify the location of the boot loader manually.

  2. Click OK to apply the changes.

Boot code options
Figure 12.2: Boot code options

The Boot Code Options tab includes the following additional options:

Set Active Flag in Partition Table for Boot Partition

Activates the partition that contains the /boot directory. For POWER systems it activates the PReP partition. Use this option on systems with old BIOS and/or legacy operating systems because they may fail to boot from a non-active partition. It is safe to leave this option active.

Write Generic Boot Code to MBR

If MBR contains a custom 'non-GRUB' code, this option replaces it with a generic, operating system independent code. If you deactivate this option, the system may become unbootable.

Enable Trusted Boot Support

Starts TrustedGRUB2, which supports trusted computing functionality (Trusted Platform Module (TPM)). For more information refer to https://github.com/Sirrix-AG/TrustedGRUB2.

The Protective MBR flag section includes the following options:

set

This is appropriate for traditional legacy BIOS booting.

remove

This is appropriate for UEFI booting.

do not change

This is usually the best choice if you have an already working system.

In most cases YaST defaults to the appropriate choice.

12.3.2 Adjusting the disk order Edit source

If your computer has more than one hard disk, you can specify the boot sequence of the disks. The first disk in the list is where GRUB 2 will be installed in the case of booting from MBR. It is the disk where openSUSE Leap is installed by default. The rest of the list is a hint for GRUB 2's device mapper (see Section 12.2.4, “Mapping between BIOS drives and Linux devices”).

Warning
Warning: Unbootable system

The default value is usually valid for almost all deployments. If you change the boot order of disks wrongly, the system may become unbootable on the next reboot. For example, if the first disk in the list is not part of the BIOS boot order, and the other disks in the list have empty MBRs.

Procedure 12.2: Setting the disk order
  1. Open the Boot Code Options tab.

  2. Click Edit Disk Boot Order.

  3. If more than one disk is listed, select a disk and click Up or Down to reorder the displayed disks.

  4. Click OK two times to save the changes.

12.3.3 Configuring advanced options Edit source

Advanced boot parameters can be configured via the Boot Loader Options tab.

12.3.3.1 Boot Loader Options tab Edit source

Boot loader options
Figure 12.3: Boot loader options
Boot Loader Time-Out

Change the value of Time-Out in Seconds by typing in a new value and clicking the appropriate arrow key with your mouse.

Probe Foreign OS

When selected, the boot loader searches for other systems like Windows or other Linux installations.

Hide Menu on Boot

Hides the boot menu and boots the default entry.

Adjusting the Default Boot Entry

Select the desired entry from the Default Boot Section list. Note that the > sign in the boot entry name delimits the boot section and its subsection.

Protect Boot Loader with Password

Protects the boot loader and the system with an additional password. For details on manual configuration, see Section 12.2.6, “Setting a boot password”. If this option is activated, the boot password is required on every boot, which means the system does not boot automatically. However, if you prefer the behavior of GRUB 1, additionally enable Protect Entry Modification Only. With this setting, anybody is allowed to select a boot entry and boot the system, whereas the password for the GRUB 2 root user is only required for modifying boot entries.

12.3.3.2 Kernel Parameters tab Edit source

Kernel parameters
Figure 12.4: Kernel parameters
Optional Kernel Command Line Parameter

Specify optional kernel parameters here to enable/disable system features, add drivers, etc.

CPU Mitigations

SUSE has released one or more kernel boot command line parameters for all software mitigations that have been deployed to prevent CPU side-channel attacks. Some of those may result in performance loss. Choose one the following options to strike a balance between security and performance, depending on your setting:

Auto Enables all mitigations required for your CPU model, but does not protect against cross-CPU thread attacks. This setting may impact performance to some degree, depending on the workload.

Auto + No SMT Provides the full set of available security mitigations. Enables all mitigations required for your CPU model. In addition, it disables Simultaneous Multithreading (SMT) to avoid side-channel attacks across multiple CPU threads. This setting may further impact performance, depending on the workload.

Off Disables all mitigations. Side-channel attacks against your CPU are possible, depending on the CPU model. This setting has no impact on performance.

Manual Does not set any mitigation level. Specify your CPU mitigations manually by using the kernel command line options.

Use Graphical Console

When checked, the boot menu appears on a graphical splash screen rather than in a text mode. The resolution of the boot screen is set automatically by default, but you can manually set it via Console resolution. The graphical theme definition file can be specified with the Console theme file chooser. Only change this if you want to apply your own, custom-made theme.

Use Serial Console

If your machine is controlled via a serial console, activate this option and specify which COM port to use at which speed. See info grub or http://www.gnu.org/software/grub/manual/grub.html#Serial-terminal

12.4 Helpful GRUB 2 commands Edit source

grub2-mkconfig

Generates a new /boot/grub2/grub.cfg based on /etc/default/grub and the scripts from /etc/grub.d/.

Example 12.1: Usage of grub2-mkconfig
grub2-mkconfig -o /boot/grub2/grub.cfg
Tip
Tip: Syntax check

Running grub2-mkconfig without any parameters prints the configuration to STDOUT where it can be reviewed. Use grub2-script-check after /boot/grub2/grub.cfg has been written to check its syntax.

Important
Important: grub2-mkconfig cannot repair UEFI Secure Boot tables

If you are using UEFI Secure Boot and your system is not reaching GRUB 2 correctly anymore, you may need to additionally reinstall the Shim and regenerate the UEFI boot table. To do so, use:

# shim-install --config-file=/boot/grub2/grub.cfg
grub2-mkrescue

Creates a bootable rescue image of your installed GRUB 2 configuration.

Example 12.2: Usage of grub2-mkrescue
grub2-mkrescue -o save_path/name.iso iso
grub2-script-check

Checks the given file for syntax errors.

Example 12.3: Usage of grub2-script-check
grub2-script-check /boot/grub2/grub.cfg
grub2-once

Set the default boot entry for the next boot only. To get the list of available boot entries use the --list option.

Example 12.4: Usage of grub2-once
grub2-once number_of_the_boot_entry
Tip
Tip: grub2-once help

Call the program without any option to get a full list of all possible options.

12.5 More information Edit source

Extensive information about GRUB 2 is available at https://www.gnu.org/software/grub/. Also refer to the grub info page.

13 Basic networking Edit source

Abstract

Linux offers the necessary networking tools and features for integration into all types of network structures. Network access using a network card can be configured with YaST. Manual configuration is also possible. In this chapter, only the fundamental mechanisms and the relevant network configuration files are covered.

Linux and other Unix operating systems use the TCP/IP protocol. It is not a single network protocol, but a family of network protocols that offer multiple services. The protocols listed in Several protocols in the TCP/IP protocol family are provided for exchanging data between two machines via TCP/IP. Networks combined by TCP/IP, comprising a worldwide network, are also called the Internet.

RFC stands for Request for Comments. RFCs are documents that describe Internet protocols and implementation procedures for the operating system and its applications. The RFC documents describe the setup of Internet protocols. For more information about RFCs, see https://datatracker.ietf.org/.

Several protocols in the TCP/IP protocol family
TCP

Transmission Control Protocol: a connection-oriented secure protocol. The data to transmit is first sent by the application as a stream of data and converted into the appropriate format by the operating system. The data arrives at the respective application on the destination host in the original data stream format it was initially sent. TCP determines whether any data has been lost or jumbled during the transmission. TCP is implemented wherever the data sequence matters.

UDP

User Datagram Protocol: a connectionless, insecure protocol. The data to transmit is sent in the form of packets generated by the application. The order in which the data arrives at the recipient is not guaranteed and data loss is possible. UDP is suitable for record-oriented applications. It features a smaller latency period than TCP.

ICMP

Internet Control Message Protocol: this is not a protocol for the end user, but a special control protocol that issues error reports and can control the behavior of machines participating in TCP/IP data transfer. In addition, it provides a special echo mode that can be viewed using the program ping.

IGMP

Internet Group Management Protocol: this protocol controls machine behavior when implementing IP multicast.

As shown in Figure 13.1, “Simplified layer model for TCP/IP”, data exchange takes place in different layers. The actual network layer is the insecure data transfer via IP (Internet protocol). On top of IP, TCP (transmission control protocol) guarantees, to a certain extent, security of the data transfer. The IP layer is supported by the underlying hardware-dependent protocol, such as Ethernet.

OSI and TCP
Figure 13.1: Simplified layer model for TCP/IP

The diagram provides one or two examples for each layer. The layers are ordered according to abstraction levels. The lowest layer is close to the hardware. The uppermost layer, however, is almost a complete abstraction from the hardware. Every layer has its own special function. The special functions of each layer are implicit in their description. The data link and physical layers represent the physical network used, such as Ethernet.

Almost all hardware protocols work on a packet-oriented basis. The data to transmit is collected into packets (it cannot be sent all at once). The maximum size of a TCP/IP packet is approximately 64 KB. Packets are normally small, as the network hardware can be a limiting factor. The maximum size of a data packet on Ethernet is about fifteen hundred bytes. The size of a TCP/IP packet is limited to this amount when the data is sent over Ethernet. If more data is transferred, more data packets need to be sent by the operating system.

For the layers to serve their designated functions, additional information regarding each layer must be saved in the data packet. This takes place in the header of the packet. Every layer attaches a small block of data, called the protocol header, to the front of each emerging packet. A sample TCP/IP data packet traveling over an Ethernet cable is illustrated in Figure 13.2, “TCP/IP Ethernet packet”. The proof sum is located at the end of the packet, not at the beginning. This simplifies things for the network hardware.

TCP/IP Ethernet packet
Figure 13.2: TCP/IP Ethernet packet

When an application sends data over the network, the data passes through each layer, all implemented in the Linux kernel except the physical layer. Each layer is responsible for preparing the data so it can be passed to the next layer. The lowest layer is ultimately responsible for sending the data. The entire procedure is reversed when data is received. Like the layers of an onion, in each layer the protocol headers are removed from the transported data. Finally, the transport layer is responsible for making the data available for use by the applications at the destination. In this manner, one layer only communicates with the layer directly above or below it. For applications, it is irrelevant whether data is transmitted via a wireless or wired connection. Likewise, it is irrelevant for the data line which kind of data is transmitted, if packets are in the correct format.

13.1 IP addresses and routing Edit source

The discussion in this section is limited to IPv4 networks. For information about IPv6 protocol, the successor to IPv4, refer to Section 13.2, “IPv6—the next generation Internet”.

13.1.1 IP addresses Edit source

Every computer on the Internet has a unique 32-bit address. These 32 bits (or 4 bytes) are normally written as illustrated in the second row in Example 13.1, “Writing IP addresses”.

Example 13.1: Writing IP addresses
IP Address (binary):  11000000 10101000 00000000 00010100
IP Address (decimal):      192.     168.       0.      20

In decimal form, the four bytes are written in the decimal number system, separated by periods. The IP address is assigned to a host or a network interface. It can be used only once throughout the world. There are exceptions to this rule, but these are not relevant to the following passages.

The points in IP addresses indicate the hierarchical system. Until the 1990s, IP addresses were strictly categorized in classes. However, this system proved too inflexible and was discontinued. Now, classless routing (CIDR, classless interdomain routing) is used.

13.1.2 Netmasks and routing Edit source

Netmasks are used to define the address range of a subnet. If two hosts are in the same subnet, they can reach each other directly. If they are not in the same subnet, they need the address of a gateway that handles all the traffic for the subnet. To check if two IP addresses are in the same subnet, simply AND both addresses with the netmask. If the result is identical, both IP addresses are in the same local network. If there are differences, the remote IP address, and thus the remote interface, can only be reached over a gateway.

To understand how the netmask works, look at Example 13.2, “Linking IP addresses to the netmask”. The netmask consists of 32 bits that identify how much of an IP address belongs to the network. All those bits that are 1 mark the corresponding bit in the IP address as belonging to the network. All bits that are 0 mark bits inside the subnet. This means that the more bits are 1, the smaller the subnet is. Because the netmask always consists of several successive 1 bits, it is also possible to count the number of bits in the netmask. In Example 13.2, “Linking IP addresses to the netmask” the first net with 24 bits could also be written as 192.168.0.0/24.

Example 13.2: Linking IP addresses to the netmask
IP address (192.168.0.20):  11000000 10101000 00000000 00010100
Netmask   (255.255.255.0):  11111111 11111111 11111111 00000000
---------------------------------------------------------------
Result of the link:         11000000 10101000 00000000 00000000
In the decimal system:           192.     168.       0.       0

IP address (213.95.15.200): 11010101 10111111 00001111 11001000
Netmask    (255.255.255.0): 11111111 11111111 11111111 00000000
---------------------------------------------------------------
Result of the link:         11010101 10111111 00001111 00000000
In the decimal system:           213.      95.      15.       0

To give another example: all machines connected with the same Ethernet cable are normally located in the same subnet and are directly accessible. Even when the subnet is physically divided by switches or bridges, these hosts can still be reached directly.

IP addresses outside the local subnet can only be reached if a gateway is configured for the target network. In the most common case, there is only one gateway that handles all traffic that is external. However, it is also possible to configure several gateways for different subnets.

If a gateway has been configured, all external IP packets are sent to the appropriate gateway. This gateway then attempts to forward the packets in the same manner—from host to host—until it reaches the destination host or the packet's TTL (time to live) expires.

Specific addresses
Base Network Address

This is the netmask AND any address in the network, as shown in Example 13.2, “Linking IP addresses to the netmask” under Result. This address cannot be assigned to any hosts.

Broadcast Address

This could be paraphrased as: Access all hosts in this subnet. To generate this, the netmask is inverted in binary form and linked to the base network address with a logical OR. The above example therefore results in 192.168.0.255. This address cannot be assigned to any hosts.

Local Host

The address 127.0.0.1 is assigned to the loopback device on each host. A connection can be set up to your own machine with this address and with all addresses from the complete 127.0.0.0/8 loopback network as defined with IPv4. With IPv6 there is only one loopback address (::1).

Because IP addresses must be unique all over the world, you cannot select random addresses. There are three address domains to use to set up a private IP-based network. These cannot get any connection from the rest of the Internet, because they cannot be transmitted over the Internet. These address domains are specified in RFC 1597 and listed in Table 13.1, “Private IP address domains”.

Table 13.1: Private IP address domains

Network/Netmask

Domain

10.0.0.0/255.0.0.0

10.x.x.x

172.16.0.0/255.240.0.0

172.16.x.x172.31.x.x

192.168.0.0/255.255.0.0

192.168.x.x

13.2 IPv6—the next generation Internet Edit source

Because of the emergence of the World Wide Web (WWW), the Internet has experienced explosive growth, with an increasing number of computers communicating via TCP/IP in the past fifteen years. Since Tim Berners-Lee at CERN (http://public.web.cern.ch) invented the WWW in 1990, the number of Internet hosts has grown from a few thousand to about a hundred million.

As mentioned, an IPv4 address consists of only 32 bits. Also, a few IP addresses are lost—they cannot be used because of the way networks are organized. The number of addresses available in your subnet is two to the power of the number of bits, minus two. A subnet has, for example, 2, 6 or 14 addresses available. To connect 128 hosts to the Internet, for example, you need a subnet with 256 IP addresses, from which only 254 are usable, because two IP addresses are needed for the structure of the subnet itself: the broadcast and the base network address.

Under the current IPv4 protocol, DHCP or NAT (network address translation) are the typical mechanisms used to circumvent the potential address shortage. Combined with the convention to keep private and public address spaces separate, these methods can certainly mitigate the shortage. To set up a host in an IPv4 network, you need several address items, such as the host's own IP address, the subnetmask, the gateway address, and maybe a name server address. All these items need to be known and cannot be derived from somewhere else.

With IPv6, both the address shortage and the complicated configuration should be a thing of the past. The following sections tell more about the improvements and benefits brought by IPv6 and about the transition from the old protocol to the new one.

13.2.1 Advantages Edit source

The most important and most visible improvement brought by the IPv6 protocol is the enormous expansion of the available address space. An IPv6 address is made up of 128 bit values instead of the traditional 32 bits. This provides for as many as several quadrillion IP addresses.

However, IPv6 addresses are not only different from their predecessors with regard to their length. They also have a different internal structure that may contain more specific information about the systems and the networks to which they belong. More details about this are found in Section 13.2.2, “Address types and structure”.

The following is a list of other advantages of the IPv6 protocol:

Autoconfiguration

IPv6 makes the network plug and play capable, which means that a newly configured system integrates into the (local) network without any manual configuration. The new host uses its automatic configuration mechanism to derive its own address from the information made available by the neighboring routers, relying on a protocol called the neighbor discovery (ND) protocol. This method does not require any intervention on the administrator's part and there is no need to maintain a central server for address allocation—an additional advantage over IPv4, where automatic address allocation requires a DHCP server.

Nevertheless if a router is connected to a switch, the router should send periodic advertisements with flags telling the hosts of a network how they should interact with each other. For more information, see RFC 2462 and the radvd.conf(5) man page, and RFC 3315.

Mobility

IPv6 makes it possible to assign several addresses to one network interface at the same time. This allows users to access several networks easily, something that could be compared with the international roaming services offered by mobile phone companies. When you take your mobile phone abroad, the phone automatically logs in to a foreign service when it enters the corresponding area, so you can be reached under the same number everywhere and can place an outgoing call, as you would in your home area.

Secure communication

With IPv4, network security is an add-on function. IPv6 includes IPsec as one of its core features, allowing systems to communicate over a secure tunnel to avoid eavesdropping by outsiders on the Internet.

Backward compatibility

Realistically, it would be impossible to switch the entire Internet from IPv4 to IPv6 at one time. Therefore, it is crucial that both protocols can coexist not only on the Internet, but also on one system. This is ensured by compatible addresses (IPv4 addresses can easily be translated into IPv6 addresses) and by using several tunnels. See Section 13.2.3, “Coexistence of IPv4 and IPv6”. Also, systems can rely on a dual stack IP technique to support both protocols at the same time, meaning that they have two network stacks that are completely separate, such that there is no interference between the two protocol versions.

Custom tailored services through multicasting

With IPv4, certain services, such as SMB, need to broadcast their packets to all hosts in the local network. IPv6 allows a much more fine-grained approach by enabling servers to address hosts through multicasting, that is by addressing several hosts as parts of a group. This is different from addressing all hosts through broadcasting or each host individually through unicasting. Which hosts are addressed as a group may depend on the concrete application. There are specific predefined groups to address all name servers (the all name servers multicast group), for example, or all routers (the all routers multicast group).

13.2.2 Address types and structure Edit source

As mentioned, the current IP protocol has two major limitations: there is an increasing shortage of IP addresses and configuring the network and maintaining the routing tables is becoming a more complex and burdensome task. IPv6 solves the first problem by expanding the address space to 128 bits. The second one is mitigated by introducing a hierarchical address structure combined with sophisticated techniques to allocate network addresses, and multihoming (the ability to assign several addresses to one device, giving access to several networks).

When dealing with IPv6, it is useful to know about three different types of addresses:

Unicast

Addresses of this type are associated with exactly one network interface. Packets with such an address are delivered to only one destination. Accordingly, unicast addresses are used to transfer packets to individual hosts on the local network or the Internet.

Multicast

Addresses of this type relate to a group of network interfaces. Packets with such an address are delivered to all destinations that belong to the group. Multicast addresses are mainly used by certain network services to communicate with certain groups of hosts in a well-directed manner.

Anycast

Addresses of this type are related to a group of interfaces. Packets with such an address are delivered to the member of the group that is closest to the sender, according to the principles of the underlying routing protocol. Anycast addresses are used to make it easier for hosts to find out about servers offering certain services in the given network area. All servers of the same type have the same anycast address. Whenever a host requests a service, it receives a reply from the server with the closest location, as determined by the routing protocol. If this server should fail, the protocol automatically selects the second closest server, then the third one, and so forth.

An IPv6 address is made up of eight four-digit fields, each representing 16 bits, written in hexadecimal notation. They are separated by colons (:). Any leading zero bytes within a given field may be dropped, but zeros within the field or at its end may not. Another convention is that more than four consecutive zero bytes may be collapsed into a double colon. However, only one such :: is allowed per address. This kind of shorthand notation is shown in Example 13.3, “Sample IPv6 address”, where all three lines represent the same address.

Example 13.3: Sample IPv6 address
fe80 : 0000 : 0000 : 0000 : 0000 : 10 : 1000 : 1a4
fe80 :    0 :    0 :    0 :    0 : 10 : 1000 : 1a4
fe80 :                           : 10 : 1000 : 1a4

Each part of an IPv6 address has a defined function. The first bytes form the prefix and specify the type of address. The center part is the network portion of the address, but it may be unused. The end of the address forms the host part. With IPv6, the netmask is defined by indicating the length of the prefix after a slash at the end of the address. An address, as shown in Example 13.4, “IPv6 address specifying the prefix length”, contains the information that the first 64 bits form the network part of the address and the last 64 form its host part. In other words, the 64 means that the netmask is filled with 64 1-bit values from the left. As with IPv4, the IP address is combined with AND with the values from the netmask to determine whether the host is located in the same subnet or in another one.

Example 13.4: IPv6 address specifying the prefix length
fe80::10:1000:1a4/64

IPv6 knows about several predefined types of prefixes. Some are shown in IPv6 prefixes.

IPv6 prefixes
00

IPv4 addresses and IPv4 over IPv6 compatibility addresses. These are used to maintain compatibility with IPv4. Their use still requires a router able to translate IPv6 packets into IPv4 packets. Several special addresses, such as the one for the loopback device, have this prefix as well.

2 or 3 as the first digit

Aggregatable global unicast addresses. As is the case with IPv4, an interface can be assigned to form part of a certain subnet. Currently, there are the following address spaces: 2001::/16 (production quality address space) and 2002::/16 (6to4 address space).

fe80::/10

Link-local addresses. Addresses with this prefix should not be routed and should therefore only be reachable from within the same subnet.

fec0::/10

Site-local addresses. These may be routed, but only within the network of the organization to which they belong. In effect, they are the IPv6 equivalent of the current private network address space, such as 10.x.x.x.

ff

These are multicast addresses.

A unicast address consists of three basic components:

Public topology

The first part (which also contains one of the prefixes mentioned above) is used to route packets through the public Internet. It includes information about the company or institution that provides the Internet access.

Site topology

The second part contains routing information about the subnet to which to deliver the packet.

Interface ID

The third part identifies the interface to which to deliver the packet. This also allows for the MAC to form part of the address. Given that the MAC is a globally unique, fixed identifier coded into the device by the hardware maker, the configuration procedure is simplified. In fact, the first 64 address bits are consolidated to form the EUI-64 token, with the last 48 bits taken from the MAC, and the remaining 24 bits containing special information about the token type. This also makes it possible to assign an EUI-64 token to interfaces that do not have a MAC, such as those based on point-to-point protocol (PPP).

On top of this basic structure, IPv6 distinguishes between five different types of unicast addresses:

:: (unspecified)

This address is used by the host as its source address when the interface is initialized for the first time (at which point, the address cannot yet be determined by other means).

::1 (loopback)

The address of the loopback device.

IPv4 compatible addresses

The IPv6 address is formed by the IPv4 address and a prefix consisting of 96 zero bits. This type of compatibility address is used for tunneling (see Section 13.2.3, “Coexistence of IPv4 and IPv6”) to allow IPv4 and IPv6 hosts to communicate with others operating in a pure IPv4 environment.

IPv4 addresses mapped to IPv6

This type of address specifies a pure IPv4 address in IPv6 notation.

Local addresses

There are two address types for local use:

link-local

This type of address can only be used in the local subnet. Packets with a source or target address of this type should not be routed to the Internet or other subnets. These addresses contain a special prefix (fe80::/10) and the interface ID of the network card, with the middle part consisting of zero bytes. Addresses of this type are used during automatic configuration to communicate with other hosts belonging to the same subnet.

site-local

Packets with this type of address may be routed to other subnets, but not to the wider Internet—they must remain inside the organization's own network. Such addresses are used for intranets and are an equivalent of the private address space defined by IPv4. They contain a special prefix (fec0::/10), the interface ID, and a 16-bit field specifying the subnet ID. Again, the rest is filled with zero bytes.

As a new feature introduced with IPv6, each network interface normally gets several IP addresses, with the advantage that several networks can be accessed through the same interface. One of these networks can be configured automatically using the MAC and a known prefix with the result that all hosts on the local network can be reached when IPv6 is enabled (using the link-local address). With the MAC forming part of it, any IP address used in the world is unique. The only variable parts of the address are those specifying the site topology and the public topology, depending on the actual network in which the host is currently operating.

For a host to go back and forth between different networks, it needs at least two addresses. One of them, the home address, not only contains the interface ID but also an identifier of the home network to which it normally belongs (and the corresponding prefix). The home address is a static address and, as such, it does not normally change. Still, all packets destined to the mobile host can be delivered to it, regardless of whether it operates in the home network or somewhere outside. This is made possible by new features introduced with IPv6, such as stateless autoconfiguration and neighbor discovery. In addition to its home address, a mobile host gets one or more additional addresses that belong to the foreign networks where it is roaming. These are called care-of addresses. The home network has a facility that forwards any packets destined to the host when it is roaming outside. In an IPv6 environment, this task is performed by the home agent, which takes all packets destined to the home address and relays them through a tunnel. Those packets destined to the care-of address are directly transferred to the mobile host without any special detours.

13.2.3 Coexistence of IPv4 and IPv6 Edit source

The migration of all hosts connected to the Internet from IPv4 to IPv6 is a gradual process. Both protocols will coexist for a certain time to come. The coexistence on one system is guaranteed where there is a dual stack implementation of both protocols. That still leaves the question of how an IPv6 enabled host should communicate with an IPv4 host and how IPv6 packets should be transported by the current networks, which are predominantly IPv4-based. The best solutions offer tunneling and compatibility addresses (see Section 13.2.2, “Address types and structure”).

IPv6 hosts that are isolated in the (worldwide) IPv4 network can communicate through tunnels: IPv6 packets are encapsulated as IPv4 packets to move them across an IPv4 network. Such a connection between two IPv4 hosts is called a tunnel. To achieve this, packets must include the IPv6 destination address (or the corresponding prefix) and the IPv4 address of the remote host at the receiving end of the tunnel. A basic tunnel can be configured manually according to an agreement between the hosts' administrators. This is also called static tunneling.

However, the configuration and maintenance of static tunnels is often too labor-intensive to use them for daily communication needs. Therefore, IPv6 provides for three different methods of dynamic tunneling:

6over4

IPv6 packets are automatically encapsulated as IPv4 packets and sent over an IPv4 network capable of multicasting. IPv6 is tricked into seeing the whole network (Internet) as a huge local area network (LAN). This makes it possible to determine the receiving end of the IPv4 tunnel automatically. However, this method does not scale well and is also hampered because IP multicasting is far from widespread on the Internet. Therefore, it only provides a solution for smaller corporate or institutional networks where multicasting can be enabled. The specifications for this method are laid down in RFC 2529.

6to4

With this method, IPv4 addresses are automatically generated from IPv6 addresses, enabling isolated IPv6 hosts to communicate over an IPv4 network. However, several problems have been reported regarding the communication between those isolated IPv6 hosts and the Internet. The method is described in RFC 3056.

IPv6 tunnel broker

This method relies on special servers that provide dedicated tunnels for IPv6 hosts. It is described in RFC 3053.

13.2.4 Configuring IPv6 Edit source

To configure IPv6, you normally do not need to make any changes on the individual workstations. IPv6 is enabled by default. To disable or enable IPv6 on an installed system, use the YaST Network Settings module. On the Global Options tab, select or deselect the Enable IPv6 option as necessary. To enable it temporarily until the next reboot, enter modprobe -i ipv6 as root. It is impossible to unload the IPv6 module after it has been loaded.

Because of the autoconfiguration concept of IPv6, the network card is assigned an address in the link-local network. Normally, no routing table management takes place on a workstation. The network routers can be queried by the workstation, using the router advertisement protocol, for what prefix and gateways should be implemented. The radvd program can be used to set up an IPv6 router. This program informs the workstations which prefix to use for the IPv6 addresses and which routers. Alternatively, use zebra/quagga for automatic configuration of both addresses and routing.

For information about how to set up multiple types of tunnels using the /etc/sysconfig/network files, see the man page of ifcfg-tunnel (man ifcfg-tunnel).

13.2.5 More information Edit source

The above overview does not cover the topic of IPv6 comprehensively. For a more in-depth look at the newer protocol, refer to the following online documentation and books:

http://www.ipv6.org/

The starting point for everything about IPv6.

http://www.ipv6day.org

All information needed to start your own IPv6 network.

http://www.ipv6-to-standard.org/

The list of IPv6-enabled products.

http://www.bieringer.de/linux/IPv6/

Here, find the Linux IPv6-HOWTO and many links related to the topic.

RFC 2460

The fundamental RFC about IPv6.

IPv6 essentials

A book describing all the important aspects of the topic is IPv6 Essentials by Silvia Hagen (ISBN 0-596-00125-8).

13.3 Name resolution Edit source

DNS assists in assigning an IP address to one or more names and assigning a name to an IP address. In Linux, this conversion is normally carried out by a special type of software known as bind. The machine that takes care of this conversion is called a name server. The names make up a hierarchical system in which each name component is separated by a period. The name hierarchy is, however, independent of the IP address hierarchy described above.

Consider a complete name, such as jupiter.example.com, written in the format hostname.domain. A full name, called a fully qualified domain name (FQDN), consists of a host name and a domain name (example.com). The latter also includes the top level domain or TLD (com).

TLD assignment has become confusing for historical reasons. Traditionally, three-letter domain names are used in the USA. In the rest of the world, the two-letter ISO national codes are the standard. Additionally, longer TLDs were introduced in 2000 that represent certain spheres of activity (for example, .info, .name, .museum).

In the early days of the Internet (before 1990), the file /etc/hosts was used to store the names of all the machines represented over the Internet. This quickly proved to be impractical in the face of the rapidly growing number of computers connected to the Internet. For this reason, a decentralized database was developed to store the host names in a widely distributed manner. This database, similar to the name server, does not have the data pertaining to all hosts in the Internet available, but can dispatch requests to other name servers.

The top of the hierarchy is occupied by root name servers. These root name servers manage the top level domains and are run by the Network Information Center (NIC). Each root name server knows about the name servers responsible for a given top level domain. Information about top level domain NICs is available at http://www.internic.net.

DNS can do more than resolve host names. The name server also knows which host is receiving e-mails for an entire domain—the mail exchanger (MX).

For your machine to resolve an IP address, it must know about at least one name server and its IP address. Easily specify such a name server using YaST. The configuration of name server access with openSUSE® Leap is described in Section 13.4.1.4, “Configuring host name and DNS”. Setting up your own name server is described in Chapter 19, The domain name system.

The protocol whois is closely related to DNS. With this program, quickly find out who is responsible for a given domain.

Note
Note: MDNS and .local domain names

The .local top level domain is treated as link-local domain by the resolver. DNS requests are sent as multicast DNS requests instead of normal DNS requests. If you already use the .local domain in your name server configuration, you must switch this option off in /etc/host.conf. For more information, see the host.conf manual page.

To switch off MDNS during installation, use nomdns=1 as a boot parameter.

For more information on multicast DNS, see http://www.multicastdns.org.

13.4 Configuring a network connection with YaST Edit source

There are many supported networking types on Linux. Most of them use different device names and the configuration files are spread over several locations in the file system. For a detailed overview of the aspects of manual network configuration, see Section 13.6, “Configuring a network connection manually”.

All network interfaces with link up (with a network cable connected) are automatically configured. Additional hardware can be configured any time on the installed system. The following sections describe the network configuration for all types of network connections supported by openSUSE Leap.

13.4.1 Configuring the network card with YaST Edit source

To configure your Ethernet or Wi-Fi/Bluetooth card in YaST, select System › Network Settings. After starting the module, YaST displays the Network Settings dialog with four tabs: Global Options, Overview, Hostname/DNS and Routing.

The Global Options tab allows you to set general networking options such as the network setup method, IPv6, and general DHCP options. For more information, see Section 13.4.1.1, “Configuring global networking options”.

The Overview tab contains information about installed network interfaces and configurations. Any properly detected network card is listed with its name. You can manually configure new cards, remove or change their configuration in this dialog. To manually configure a card that was not automatically detected, see Section 13.4.1.3, “Configuring an undetected network card”. To change the configuration of an already configured card, see Section 13.4.1.2, “Changing the configuration of a network card”.

The Hostname/DNS tab allows to set the host name of the machine and name the servers to be used. For more information, see Section 13.4.1.4, “Configuring host name and DNS”.

The Routing tab is used for the configuration of routing. See Section 13.4.1.5, “Configuring routing” for more information.

Configuring network settings
Figure 13.3: Configuring network settings

13.4.1.1 Configuring global networking options Edit source

The Global Options tab of the YaST Network Settings module allows you to set important global networking options, such as the use of NetworkManager, IPv6 and DHCP client options. These settings are applicable for all network interfaces.

In the Network Setup Method choose the way network connections are managed. If you want a NetworkManager desktop applet to manage connections for all interfaces, choose NetworkManager Service. NetworkManager is well suited for switching between multiple wired and wireless networks. If you do not run a desktop environment, or if your computer is a Xen server, virtual system, or provides network services such as DHCP or DNS in your network, use the Wicked Service method. If NetworkManager is used, nm-applet should be used to configure network options and the Overview, Hostname/DNS and Routing tabs of the Network Settings module are disabled. For more information on NetworkManager, see Chapter 28, Using NetworkManager.

In the IPv6 Protocol Settings choose whether to use the IPv6 protocol. It is possible to use IPv6 together with IPv4. By default, IPv6 is enabled. However, in networks not using IPv6 protocol, response times can be faster with IPv6 protocol disabled. To disable IPv6, deactivate Enable IPv6. If IPv6 is disabled, the kernel no longer loads the IPv6 module automatically. This setting will be applied after reboot.

In the DHCP Client Options configure options for the DHCP client. The DHCP Client Identifier must be different for each DHCP client on a single network. If left empty, it defaults to the hardware address of the network interface. However, if you are running several virtual machines using the same network interface and, therefore, the same hardware address, specify a unique free-form identifier here.

The Hostname to Send specifies a string used for the host name option field when the DHCP client sends messages to DHCP server. Some DHCP servers update name server zones (forward and reverse records) according to this host name (Dynamic DNS). Also, some DHCP servers require the Hostname to Send option field to contain a specific string in the DHCP messages from clients. Leave AUTO to send the current host name (that is the one defined in /etc/HOSTNAME). Make the option field empty for not sending any host name.

If you do not want to change the default route according to the information from DHCP, deactivate Change Default Route via DHCP.

13.4.1.2 Changing the configuration of a network card Edit source

To change the configuration of a network card, select a card from the list of the detected cards in Network Settings › Overview in YaST and click Edit. The Network Card Setup dialog appears in which to adjust the card configuration using the General, Address and Hardware tabs.

13.4.1.2.1 Configuring IP addresses Edit source

You can set the IP address of the network card or the way its IP address is determined in the Address tab of the Network Card Setup dialog. Both IPv4 and IPv6 addresses are supported. The network card can have No IP Address (which is useful for bonding devices), a Statically Assigned IP Address (IPv4 or IPv6) or a Dynamic Address assigned via DHCP or Zeroconf or both.

If using Dynamic Address, select whether to use DHCP Version 4 Only (for IPv4), DHCP Version 6 Only (for IPv6) or DHCP Both Version 4 and 6.

If possible, the first network card with link that is available during the installation is automatically configured to use automatic address setup via DHCP.

DHCP should also be used if you are using a DSL line but with no static IP assigned by the ISP (Internet Service Provider). If you decide to use DHCP, configure the details in DHCP Client Options in the Global Options tab of the Network Settings dialog of the YaST network card configuration module. If you have a virtual host setup where different hosts communicate through the same interface, an DHCP Client Identifier is necessary to distinguish them.

DHCP is a good choice for client configuration but it is not ideal for server configuration. To set a static IP address, proceed as follows:

  1. Select a card from the list of detected cards in the Overview tab of the YaST network card configuration module and click Edit.

  2. In the Address tab, choose Statically Assigned IP Address.

  3. Enter the IP Address. Both IPv4 and IPv6 addresses can be used. Enter the network mask in Subnet Mask. If the IPv6 address is used, use Subnet Mask for prefix length in format /64.

    Optionally, you can enter a fully qualified Hostname for this address, which will be written to the /etc/hosts configuration file.

  4. Click Next.

  5. To activate the configuration, click OK.

Note
Note: Interface activation and link detection

During activation of a network interface, wicked checks for a carrier and only applies the IP configuration when a link has been detected. If you need to apply the configuration regardless of the link status (for example, when you want to test a service listening to a certain address), you can skip link detection by adding the variable LINK_REQUIRED=no to the configuration file of the interface in /etc/sysconfig/network/ifcfg.

Additionally, you can use the variable LINK_READY_WAIT=5 to specify the timeout for waiting for a link in seconds.

For more information about the ifcfg-* configuration files, refer to Section 13.6.2.5, “/etc/sysconfig/network/ifcfg-* and man 5 ifcfg.

If you use the static address, the name servers and default gateway are not configured automatically. To configure name servers, proceed as described in Section 13.4.1.4, “Configuring host name and DNS”. To configure a gateway, proceed as described in Section 13.4.1.5, “Configuring routing”.

13.4.1.2.2 Configuring multiple addresses Edit source

A single network device can have multiple IP addresses called aliases or labels.

Note
Note: Aliases are a compatibility feature

Aliases or labels work with IPv4 only. Using iproute2 network interfaces makes it possible to have one or more addresses.

To set additional addresses for your network card using YaST, proceed as follows:

  1. Select a card from the list of detected cards in the Overview tab of the YaST Network Settings dialog and click Edit.

  2. In the Address › Additional Addresses tab, click Add.

  3. Enter IPv4 Address Label, IP Address, and Netmask. Note that IP aliases must be added with the /32 netmask. Do not include the interface name in the alias name.

  4. To activate the configuration, confirm the settings.

13.4.1.2.3 Changing the device name and udev rules Edit source

It is possible to change the device name of the network card when it is used. It is also possible to determine whether the network card should be identified by udev via its hardware (MAC) address or via the bus ID. The latter option is preferable in large servers to simplify hotplugging of cards. To set these options with YaST, proceed as follows:

  1. Select a card from the list of detected cards in the Overview tab of the YaST Network Settings dialog and click Edit.

  2. Go to the General tab. The current device name is shown in Udev Rules. Click Change.

  3. Select whether udev should identify the card by its MAC Address or Bus ID. The current MAC address and bus ID of the card are shown in the dialog.

  4. To change the device name, check the Change Device Name option and edit the name.

  5. To activate the configuration, confirm the settings.

13.4.1.2.4 Changing network card kernel driver Edit source

For some network cards, several kernel drivers may be available. If the card is already configured, YaST allows you to select a kernel driver to be used from a list of available suitable drivers. It is also possible to specify options for the kernel driver. To set these options with YaST, proceed as follows:

  1. Select a card from the list of detected cards in the Overview tab of the YaST Network Settings module and click Edit.

  2. Go to the Hardware tab.

  3. Select the kernel driver to be used in Module Name. Enter any options for the selected driver in Options in the form = =VALUE. If more options are used, they should be space-separated.

  4. To activate the configuration, confirm the settings.

13.4.1.2.5 Activating the network device Edit source

If you use the method with wicked, you can configure your device to either start during boot, on cable connection, on card detection, manually, or never. To change device start-up, proceed as follows:

  1. In YaST select a card from the list of detected cards in System › Network Settings and click Edit.

  2. In the General tab, select the desired entry from Device Activation.

    Choose At Boot Time to start the device during the system boot. With On Cable Connection, the interface is watched for any existing physical connection. With On Hotplug, the interface is set when available. It is similar to the At Boot Time option, and only differs in that no error occurs if the interface is not present at boot time. Choose Manually to control the interface manually with ifup. Choose Never to not start the device. The On NFSroot is similar to At Boot Time, but the interface does not shut down with the systemctl stop network command; the network service also cares about the wicked service if wicked is active. Use this if you use an NFS or iSCSI root file system.

  3. To activate the configuration, confirm the settings.

Tip
Tip: NFS as a root file system

On (diskless) systems where the root partition is mounted via network as an NFS share, you need to be careful when configuring the network device with which the NFS share is accessible.

When shutting down or rebooting the system, the default processing order is to turn off network connections, then unmount the root partition. With NFS root, this order causes problems as the root partition cannot be cleanly unmounted as the network connection to the NFS share is already not activated. To prevent the system from deactivating the relevant network device, open the network device configuration tab as described in Section 13.4.1.2.5, “Activating the network device” and choose On NFSroot in the Device Activation pane.

13.4.1.2.6 Setting up maximum transfer unit size Edit source

You can set a maximum transmission unit (MTU) for the interface. MTU refers to the largest allowed packet size in bytes. A higher MTU brings higher bandwidth efficiency. However, large packets can block up a slow interface for some time, increasing the lag for further packets.

  1. In YaST select a card from the list of detected cards in System › Network Settings and click Edit.

  2. In the General tab, select the desired entry from the Set MTU list.

  3. To activate the configuration, confirm the settings.

13.4.1.2.7 PCIe multifunction devices Edit source

Multifunction devices that support LAN, iSCSI, and FCoE are supported. The YaST FCoE client (yast2 fcoe-client) shows the private flags in additional columns to allow the user to select the device meant for FCoE. The YaST network module (yast2 lan) excludes storage only devices for network configuration.

13.4.1.2.8 Infiniband configuration for IP-over-InfiniBand (IPoIB) Edit source
  1. In YaST select the InfiniBand device in System › Network Settings and click Edit.

  2. In the General tab, select one of the IP-over-InfiniBand (IPoIB) modes: connected (default) or datagram.

  3. To activate the configuration, confirm the settings.

For more information about InfiniBand, see /usr/src/linux/Documentation/infiniband/ipoib.txt.

13.4.1.2.9 Configuring the firewall Edit source

Without having to perform the detailed firewall setup as described in Book “Security and Hardening Guide”, Chapter 23 “Masquerading and firewalls”, Section 23.4 “firewalld, you can determine the basic firewall configuration for your device as part of the device setup. Proceed as follows:

  1. Open the YaST System › Network Settings module. In the Overview tab, select a card from the list of detected cards and click Edit.

  2. Enter the General tab of the Network Settings dialog.

  3. Determine the Firewall Zone to which your interface should be assigned. The following options are available:

    Firewall disabled

    This option is available only if the firewall is disabled and the firewall does not run. Only use this option if your machine is part of a greater network that is protected by an outer firewall.

    Automatically assign zone

    This option is available only if the firewall is enabled. The firewall is running and the interface is automatically assigned to a firewall zone. The zone which contains the keyword any or the external zone will be used for such an interface.

    Internal zone (unprotected)

    The firewall is running, but does not enforce any rules to protect this interface. Use this option if your machine is part of a greater network that is protected by an outer firewall. It is also useful for the interfaces connected to the internal network, when the machine has more network interfaces.

    Demilitarized zone

    A demilitarized zone is an additional line of defense in front of an internal network and the (hostile) Internet. Hosts assigned to this zone can be reached from the internal network and from the Internet, but cannot access the internal network.

    External zone

    The firewall is running on this interface and fully protects it against other—presumably hostile—network traffic. This is the default option.

  4. To activate the configuration, confirm the settings.

13.4.1.3 Configuring an undetected network card Edit source

If a network card is not detected correctly, the card is not included in the list of detected cards. If you are sure that your system includes a driver for your card, you can configure it manually. You can also configure special network device types, such as bridge, bond, TUN or TAP. To configure an undetected network card (or a special device) proceed as follows:

  1. In the System › Network Settings › Overview dialog in YaST click Add.

  2. In the Hardware dialog, set the Device Type of the interface from the available options and Configuration Name. If the network card is a USB device, activate the respective check box and exit this dialog with Next. Otherwise, you can define the kernel Module Name to be used for the card and its Options, if necessary.

    In Ethtool Options, you can set ethtool options used by ifup for the interface. For information about available options, see the ethtool manual page.

    If the option string starts with a - (for example, -K INTERFACE_NAME rx on), the second word in the string is replaced with the current interface name. Otherwise (for example, autoneg off speed 10) ifup adds -s INTERFACE_NAME to the beginning.

  3. Click Next.

  4. Configure any needed options, such as the IP address, device activation or firewall zone for the interface in the General, Address, and Hardware tabs. For more information about the configuration options, see Section 13.4.1.2, “Changing the configuration of a network card”.

  5. If you selected Wireless as the device type of the interface, configure the wireless connection in the next dialog.

  6. To activate the new network configuration, confirm the settings.

13.4.1.4 Configuring host name and DNS Edit source

If you did not change the network configuration during installation and the Ethernet card was already available, a host name was automatically generated for your computer and DHCP was activated. The same applies to the name service information your host needs to integrate into a network environment. If DHCP is used for network address setup, the list of domain name servers is automatically filled with the appropriate data. If a static setup is preferred, set these values manually.

To change the name of your computer and adjust the name server search list, proceed as follows:

  1. Go to the Network Settings › Hostname/DNS tab in the System module in YaST.

  2. Enter the Hostname. Note that the host name is global and applies to all network interfaces.

    If you are using DHCP to get an IP address, the host name of your computer will be automatically set by the DHCP server. You should disable this behavior if you connect to different networks, because they may assign different host names and changing the host name at runtime may confuse the graphical desktop. To disable using DHCP to get an IP address deactivate Change Hostname via DHCP.

  3. In Modify DNS Configuration, select the way the DNS configuration (name servers, search list, the content of the /run/netconfig/resolv.conf file) is modified.

    If the Use Default Policy option is selected, the configuration is handled by the netconfig script which merges the data defined statically (with YaST or in the configuration files) with data obtained dynamically (from the DHCP client or NetworkManager). This default policy is usually sufficient.

    If the Only Manually option is selected, netconfig is not allowed to modify the /run/netconfig/resolv.conf file. However, this file can be edited manually.

    If the Custom Policy option is selected, a Custom Policy Rule string defining the merge policy should be specified. The string consists of a comma-separated list of interface names to be considered a valid source of settings. Except for complete interface names, basic wild cards to match multiple interfaces are allowed, as well. For example, eth* ppp? will first target all eth and then all ppp0-ppp9 interfaces. There are two special policy values that indicate how to apply the static settings defined in the /etc/sysconfig/network/config file:

    STATIC

    The static settings need to be merged together with the dynamic settings.

    STATIC_FALLBACK

    The static settings are used only when no dynamic configuration is available.

    For more information, see the man page of netconfig(8) (man 8 netconfig).

  4. Enter the Name Servers and fill in the Domain Search list. Name servers must be specified by IP addresses, such as 192.168.1.116, not by host names. Names specified in the Domain Search tab are domain names used for resolving host names without a specified domain. If more than one Domain Search is used, separate domains with commas or white space.

  5. To activate the configuration, confirm the settings.

It is also possible to edit the host name using YaST from the command line. The changes made by YaST take effect immediately (which is not the case when editing the /etc/HOSTNAME file manually). To change the host name, use the following command:

# yast dns edit hostname=HOSTNAME

To change the name servers, use the following commands:

# yast dns edit nameserver1=192.168.1.116
# yast dns edit nameserver2=192.168.1.117
# yast dns edit nameserver3=192.168.1.118

13.4.1.5 Configuring routing Edit source

To make your machine communicate with other machines and other networks, routing information must be given to make network traffic take the correct path. If DHCP is used, this information is automatically provided. If a static setup is used, this data must be added manually.

  1. In YaST go to Network Settings › Routing.

  2. Enter the IP address of the Default Gateway (IPv4 and IPv6 if necessary). The default gateway matches every possible destination, but if a routing table entry exists that matches the required address, this will be used instead of the default route via the Default Gateway.

  3. More entries can be entered in the Routing Table. Enter the Destination network IP address, Gateway IP address and the Netmask. Select the Device through which the traffic to the defined network will be routed (the minus sign stands for any device). To omit any of these values, use the minus sign -. To enter a default gateway into the table, use default in the Destination field.

    Note
    Note: Route prioritization

    If more default routes are used, it is possible to specify the metric option to determine which route has a higher priority. To specify the metric option, enter - metric NUMBER in Options. The lowest possible metric is 0. The route with the lowest metric has the highest priority and is used as default. If the network device is disconnected, its route will be removed and the next one will be used.

  4. If the system is a router, enable IPv4 Forwarding and IPv6 Forwarding in the Network Settings as needed.

  5. To activate the configuration, confirm the settings.

13.5 NetworkManager Edit source

NetworkManager is the ideal solution for laptops and other portable computers. With NetworkManager, you do not need to worry about configuring network interfaces and switching between networks when you are moving.

13.5.1 NetworkManager and wicked Edit source

However, NetworkManager is not a suitable solution for all cases, so you can still choose between the wicked controlled method for managing network connections and NetworkManager. If you want to manage your network connection with NetworkManager, enable NetworkManager in the YaST Network Settings module as described in Section 28.2, “Enabling or disabling NetworkManager” and configure your network connections with NetworkManager. For a list of use cases and a detailed description of how to configure and use NetworkManager, refer to Chapter 28, Using NetworkManager.

Some differences between wicked and NetworkManager:

root privileges

If you use NetworkManager for network setup, you can easily switch, stop or start your network connection at any time from within your desktop environment using an applet. NetworkManager also makes it possible to change and configure wireless card connections without requiring root privileges. For this reason, NetworkManager is the ideal solution for a mobile workstation.

wicked also provides some ways to switch, stop or start the connection with or without user intervention, like user-managed devices. However, this always requires root privileges to change or configure a network device. This is often a problem for mobile computing, where it is not possible to preconfigure all the connection possibilities.

Types of network connections

Both wicked and NetworkManager can handle network connections with a wireless network (with WEP, WPA-PSK, and WPA-Enterprise access) and wired networks using DHCP and static configuration. They also support connection through dial-up and VPN. With NetworkManager you can also connect a mobile broadband (3G) modem or set up a DSL connection, which is not possible with the traditional configuration.

NetworkManager tries to keep your computer connected at all times using the best connection available. If the network cable is accidentally disconnected, it tries to reconnect. It can find the network with the best signal strength from the list of your wireless connections and automatically use it to connect. To get the same functionality with wicked, more configuration effort is required.

13.5.2 NetworkManager functionality and configuration files Edit source

The individual network connection settings created with NetworkManager are stored in configuration profiles. The system connections configured with either NetworkManager or YaST are saved in /etc/NetworkManager/system-connections/* or in /etc/sysconfig/network/ifcfg-*. For GNOME, all user-defined connections are stored in GConf.

In case no profile is configured, NetworkManager automatically creates one and names it Auto $INTERFACE-NAME. That is made in an attempt to work without any configuration for as many cases as (securely) possible. If the automatically created profiles do not suit your needs, use the network connection configuration dialogs provided by GNOME to modify them as desired. For more information, see Section 28.3, “Configuring network connections”.

13.5.3 Controlling and locking down NetworkManager features Edit source

On centrally administered machines, certain NetworkManager features can be controlled or disabled with Polkit, for example if a user is allowed to modify administrator defined connections or if a user is allowed to define their own network configurations. To view or change the respective NetworkManager policies, start the graphical Authorizations tool for Polkit. In the tree on the left side, find them below the network-manager-settings entry. For an introduction to Polkit and details on how to use it, refer to Book “Security and Hardening Guide”, Chapter 18 “The Polkit authentication framework”.

13.6 Configuring a network connection manually Edit source

Manual configuration of the network software should be the last alternative. Using YaST is recommended. However, this background information about the network configuration can also assist your work with YaST.

13.6.1 The wicked network configuration Edit source

The tool and library called wicked provides a new framework for network configuration.

One of the challenges with traditional network interface management is that different layers of network management get jumbled together into one single script, or at most two different scripts. These scripts interact with each other in a way that is not well defined. This leads to unpredictable issues, obscure constraints and conventions, etc. Several layers of special hacks for a variety of different scenarios increase the maintenance burden. Address configuration protocols are being used that are implemented via daemons like dhcpcd, which interact rather poorly with the rest of the infrastructure. Funky interface naming schemes that require heavy udev support are introduced to achieve persistent identification of interfaces.

The idea of wicked is to decompose the problem in several ways. None of them is entirely novel, but trying to put ideas from different projects together is hopefully going to create a better solution overall.

One approach is to use a client/server model. This allows wicked to define standardized facilities for things like address configuration that are well integrated with the overall framework. For example, using a specific address configuration, the administrator may request that an interface should be configured via DHCP or IPv4 zeroconf. In this case, the address configuration service simply obtains the lease from its server and passes it on to the wicked server process that installs the requested addresses and routes.

The other approach to decomposing the problem is to enforce the layering aspect. For any type of network interface, it is possible to define a dbus service that configures the network interface's device layer—a VLAN, a bridge, a bonding, or a paravirtualized device. Common functionality, such as address configuration, is implemented by joint services that are layered on top of these device specific services without having to implement them specifically.

The wicked framework implements these two aspects by using a variety of dbus services, which get attached to a network interface depending on its type. Here is a rough overview of the current object hierarchy in wicked.

Each network interface is represented via a child object of /org/opensuse/Network/Interfaces. The name of the child object is given by its ifindex. For example, the loopback interface, which usually gets ifindex 1, is /org/opensuse/Network/Interfaces/1, the first Ethernet interface registered is /org/opensuse/Network/Interfaces/2.

Each network interface has a class associated with it, which is used to select the dbus interfaces it supports. By default, each network interface is of class netif, and wickedd will automatically attach all interfaces compatible with this class. In the current implementation, this includes the following interfaces:

org.opensuse.Network.Interface

Generic network interface functions, such as taking the link up or down, assigning an MTU, etc.

org.opensuse.Network.Addrconf.ipv4.dhcp, org.opensuse.Network.Addrconf.ipv6.dhcp, org.opensuse.Network.Addrconf.ipv4.auto

Address configuration services for DHCP, IPv4 zeroconf, etc.

Beyond this, network interfaces may require or offer special configuration mechanisms. For an Ethernet device, for example, you should be able to control the link speed, offloading of checksumming, etc. To achieve this, Ethernet devices have a class of their own, called netif-ethernet, which is a subclass of netif. As a consequence, the dbus interfaces assigned to an Ethernet interface include all the services listed above, plus the org.opensuse.Network.Ethernet service available only to objects belonging to the netif-ethernet class.

Similarly, there exist classes for interface types like bridges, VLANs, bonds, or infinibands.

How do you interact with an interface like VLAN (which is really a virtual network interface that sits on top of an Ethernet device) that needs to be created first? For this, wicked defines factory interfaces, such as org.opensuse.Network.VLAN.Factory. Such a factory interface offers a single function that lets you create an interface of the requested type. These factory interfaces are attached to the /org/opensuse/Network/Interfaces list node.

13.6.1.1 wicked architecture and features Edit source

The wicked service comprises several parts as depicted in Figure 13.4, “wicked architecture”.

wicked architecture
Figure 13.4: wicked architecture

wicked currently supports the following:

  • Configuration file back-ends to parse SUSE style /etc/sysconfig/network files.

  • An internal configuration back-end to represent network interface configuration in XML.

  • Bring up and shutdown of normal network interfaces such as Ethernet or InfiniBand, VLAN, bridge, bonds, tun, tap, dummy, macvlan, macvtap, hsi, qeth, iucv, and wireless (currently limited to one wpa-psk/eap network) devices.

  • A built-in DHCPv4 client and a built-in DHCPv6 client.

  • The nanny daemon (enabled by default) helps to automatically bring up configured interfaces when the device is available (interface hotplugging) and set up the IP configuration when a link (carrier) is detected. See Section 13.6.1.3, “Nanny” for more information.

  • wicked was implemented as a group of DBus services that are integrated with systemd. So the usual systemctl commands will apply to wicked.

13.6.1.2 Using wicked Edit source

On openSUSE Leap, wicked runs by default on desktop or server hardware. On mobile hardware NetworkManager runs by default. If you want to check what is currently enabled and whether it is running, call:

systemctl status network

If wicked is enabled, you will see something along these lines:

wicked.service - wicked managed network interfaces
    Loaded: loaded (/usr/lib/systemd/system/wicked.service; enabled)
    ...

In case something different is running (for example, NetworkManager) and you want to switch to wicked, first stop what is running and then enable wicked:

systemctl is-active network && \
systemctl stop      network
systemctl enable --force wicked

This enables the wicked services, creates the network.service to wicked.service alias link, and starts the network at the next boot.

Starting the server process:

systemctl start wickedd

This starts wickedd (the main server) and associated supplicants:

/usr/lib/wicked/bin/wickedd-auto4 --systemd --foreground
/usr/lib/wicked/bin/wickedd-dhcp4 --systemd --foreground
/usr/lib/wicked/bin/wickedd-dhcp6 --systemd --foreground
/usr/sbin/wickedd --systemd --foreground
/usr/sbin/wickedd-nanny --systemd --foreground

Then bringing up the network:

systemctl start wicked

Alternatively use the network.service alias:

systemctl start network

These commands are using the default or system configuration sources as defined in /etc/wicked/client.xml.

To enable debugging, set WICKED_DEBUG in /etc/sysconfig/network/config, for example:

WICKED_DEBUG="all"

Or, to omit some:

WICKED_DEBUG="all,-dbus,-objectmodel,-xpath,-xml"

Use the client utility to display interface information for all interfaces or the interface specified with IFNAME:

wicked show all
wicked show IFNAME

In XML output:

wicked show-xml all
wicked show-xml IFNAME

Bringing up one interface:

wicked ifup eth0
wicked ifup wlan0
...

Because there is no configuration source specified, the wicked client checks its default sources of configuration defined in /etc/wicked/client.xml:

  1. firmware: iSCSI Boot Firmware Table (iBFT)

  2. compat: ifcfg files—implemented for compatibility

Whatever wicked gets from those sources for a given interface is applied. The intended order of importance is firmware, then compat—this may be changed in the future.

For more information, see the wicked man page.

13.6.1.3 Nanny Edit source

Nanny is an event and policy driven daemon that is responsible for asynchronous or unsolicited scenarios such as hotplugging devices. Thus the nanny daemon helps with starting or restarting delayed or temporarily gone devices. Nanny monitors device and link changes, and integrates new devices defined by the current policy set. Nanny continues to set up even if ifup already exited because of specified timeout constraints.

By default, the nanny daemon is active on the system. It is enabled in the /etc/wicked/common.xml configuration file:

<config>
  ...
  <use-nanny>true</use-nanny>
</config>

This setting causes ifup and ifreload to apply a policy with the effective configuration to the nanny daemon; then, nanny configures wickedd and thus ensures hotplug support. It waits in the background for events or changes (such as new devices or carrier on).

13.6.1.4 Bringing up multiple interfaces Edit source

For bonds and bridges, it may make sense to define the entire device topology in one file (ifcfg-bondX), and bring it up in one go. wicked then can bring up the whole configuration if you specify the top level interface names (of the bridge or bond):

wicked ifup br0

This command automatically sets up the bridge and its dependencies in the appropriate order without the need to list the dependencies (ports, etc.) separately.

To bring up multiple interfaces in one command:

wicked ifup bond0 br0 br1 br2

Or also all interfaces:

wicked ifup all

13.6.1.5 Using tunnels with wicked Edit source

When you need to use tunnels with Wicked, the TUNNEL_DEVICE is used for this. It permits to specify an optional device name to bind the tunnel to the device. The tunneled packets will only be routed via this device.

For more information, refer to man 5 ifcfg-tunnel.

13.6.1.6 Handling incremental changes Edit source

With wicked, there is no need to actually take down an interface to reconfigure it (unless it is required by the kernel). For example, to add another IP address or route to a statically configured network interface, add the IP address to the interface definition, and do another ifup operation. The server will try hard to update only those settings that have changed. This applies to link-level options such as the device MTU or the MAC address, and network-level settings, such as addresses, routes, or even the address configuration mode (for example, when moving from a static configuration to DHCP).

Things get tricky of course with virtual interfaces combining several real devices such as bridges or bonds. For bonded devices, it is not possible to change certain parameters while the device is up. Doing that will result in an error.

However, what should still work, is the act of adding or removing the child devices of a bond or bridge, or choosing a bond's primary interface.

13.6.1.7 Wicked extensions: address configuration Edit source

wicked is designed to be extensible with shell scripts. These extensions can be defined in the config.xml file.

Currently, several classes of extensions are supported:

  • link configuration: these are scripts responsible for setting up a device's link layer according to the configuration provided by the client, and for tearing it down again.

  • address configuration: these are scripts responsible for managing a device's address configuration. Usually address configuration and DHCP are managed by wicked itself, but can be implemented by means of extensions.

  • firewall extension: these scripts can apply firewall rules.

Typically, extensions have a start and a stop command, an optional pid file, and a set of environment variables that get passed to the script.

To illustrate how this is supposed to work, look at a firewall extension defined in etc/server.xml:

<dbus-service interface="org.opensuse.Network.Firewall">
 <action name="firewallUp"   command="/etc/wicked/extensions/firewall up"/>
 <action name="firewallDown" command="/etc/wicked/extensions/firewall down"/>

 <!-- default environment for all calls to this extension script -->
 <putenv name="WICKED_OBJECT_PATH" value="$object-path"/>
 <putenv name="WICKED_INTERFACE_NAME" value="$property:name"/>
 <putenv name="WICKED_INTERFACE_INDEX" value="$property:index"/>
</dbus-service>

The extension is attached to the <dbus-service> tag and defines commands to execute for the actions of this interface. Further, the declaration can define and initialize environment variables passed to the actions.

13.6.1.8 Wicked extensions: configuration files Edit source

You can extend the handling of configuration files with scripts as well. For example, DNS updates from leases are ultimately handled by the extensions/resolver script, with behavior configured in server.xml:

<system-updater name="resolver">
 <action name="backup" command="/etc/wicked/extensions/resolver backup"/>
 <action name="restore" command="/etc/wicked/extensions/resolver restore"/>
 <action name="install" command="/etc/wicked/extensions/resolver install"/>
 <action name="remove" command="/etc/wicked/extensions/resolver remove"/>
</system-updater>

When an update arrives in wickedd, the system updater routines parse the lease and call the appropriate commands (backup, install, etc.) in the resolver script. This in turn configures the DNS settings using /sbin/netconfig, or by manually writing /run/netconfig/resolv.conf as a fallback.

13.6.2 Configuration files Edit source

This section provides an overview of the network configuration files and explains their purpose and the format used.

13.6.2.1 /etc/wicked/common.xml Edit source

The /etc/wicked/common.xml file contains common definitions that should be used by all applications. It is sourced/included by the other configuration files in this directory. Although you can use this file to enable debugging across all wicked components, we recommend to use the file /etc/wicked/local.xml for this purpose. After applying maintenance updates you might lose your changes as the /etc/wicked/common.xml might be overwritten. The /etc/wicked/common.xml file includes the /etc/wicked/local.xml in the default installation, thus you typically do not need to modify the /etc/wicked/common.xml.

In case you want to disable nanny by setting the <use-nanny> to false, restart the wickedd.service and then run the following command to apply all configurations and policies:

> sudo wicked ifup all
Note
Note: Configuration files

The wickedd, wicked, or nanny programs try to read /etc/wicked/common.xml if their own configuration files do not exist.

13.6.2.2 /etc/wicked/server.xml Edit source

The file /etc/wicked/server.xml is read by the wickedd server process at start-up. The file stores extensions to the /etc/wicked/common.xml. On top of that this file configures handling of a resolver and receiving information from addrconf supplicants, for example DHCP.

We recommend to add changes required to this file into a separate file /etc/wicked/server-local.xml, that gets included by /etc/wicked/server.xml. By using a separate file you avoid overwriting of your changes during maintenance updates.

13.6.2.3 /etc/wicked/client.xml Edit source

The /etc/wicked/client.xml is used by the wicked command. The file specifies the location of a script used when discovering devices managed by ibft and configures locations of network interface configurations.

We recommend to add changes required to this file into a separate file /etc/wicked/client-local.xml, that gets included by /etc/wicked/server.xml. By using a separate file you avoid overwriting of your changes during maintenance updates.

13.6.2.4 /etc/wicked/nanny.xml Edit source

The /etc/wicked/nanny.xml configures types of link layers. We recommend to add specific configuration into a separate file: /etc/wicked/nanny-local.xml to avoid losing the changes during maintenance updates.

13.6.2.5 /etc/sysconfig/network/ifcfg-* Edit source

These files contain the traditional configurations for network interfaces.

Note
Note: wicked and the ifcfg-* files

wicked reads these files if you specify the compat: prefix. According to the openSUSE Leap default configuration in /etc/wicked/client.xml, wicked tries these files before the XML configuration files in /etc/wicked/ifconfig.

The --ifconfig switch is provided mostly for testing only. If specified, default configuration sources defined in /etc/wicked/ifconfig are not applied.

The ifcfg-* files include information such as the start mode and the IP address. Possible parameters are described in the manual page of ifup. Additionally, most variables from the dhcp and wireless files can be used in the ifcfg-* files if a general setting should be used for only one interface. However, most of the /etc/sysconfig/network/config variables are global and cannot be overridden in ifcfg files. For example, NETCONFIG_* variables are global.

For configuring macvlan and macvtab interfaces, see the ifcfg-macvlan and ifcfg-macvtap man pages. For example, for a macvlan interface provide a ifcfg-macvlan0 with settings as follows:

STARTMODE='auto'
MACVLAN_DEVICE='eth0'
#MACVLAN_MODE='vepa'
#LLADDR=02:03:04:05:06:aa

For ifcfg.template, see Section 13.6.2.6, “/etc/sysconfig/network/config, /etc/sysconfig/network/dhcp, and /etc/sysconfig/network/wireless.

13.6.2.6 /etc/sysconfig/network/config, /etc/sysconfig/network/dhcp, and /etc/sysconfig/network/wireless Edit source

The file config contains general settings for the behavior of ifup, ifdown and ifstatus. dhcp contains settings for DHCP and wireless for wireless LAN cards. The variables in all three configuration files are commented. Some variables from /etc/sysconfig/network/config can also be used in ifcfg-* files, where they are given a higher priority. The /etc/sysconfig/network/ifcfg.template file lists variables that can be specified in a per interface scope. However, most of the /etc/sysconfig/network/config variables are global and cannot be overridden in ifcfg-files. For example, NETWORKMANAGER or NETCONFIG_* variables are global.

Note
Note: Using DHCPv6

DHCPv6 requires that at least one of the routers on the network sends out RAs that indicate that this network is managed by DHCPv6.

For networks where the router cannot be configured correctly, the ifcfg option allows the user to override this behavior by specifying DHCLIENT6_MODE='managed' in the ifcfg file. You can also activate this workaround with a boot parameter in the installation system:

ifcfg=eth0=dhcp6,DHCLIENT6_MODE=managed

13.6.2.7 /etc/sysconfig/network/routes and /etc/sysconfig/network/ifroute-* Edit source

The static routing of TCP/IP packets is determined by the /etc/sysconfig/network/routes and /etc/sysconfig/network/ifroute-* files. All the static routes required by the various system tasks can be specified in /etc/sysconfig/network/routes: routes to a host, routes to a host via a gateway and routes to a network. For each interface that needs individual routing, define an additional configuration file: /etc/sysconfig/network/ifroute-*. Replace the wild card (*) with the name of the interface. The entries in the routing configuration files look like this:

# Destination     Gateway           Netmask            Interface  Options

The route's destination is in the first column. This column may contain the IP address of a network or host or, in the case of reachable name servers, the fully qualified network or host name. The network should be written in CIDR notation (address with the associated routing prefix-length) such as 10.10.0.0/16 for IPv4 or fc00::/7 for IPv6 routes. The keyword default indicates that the route is the default gateway in the same address family as the gateway. For devices without a gateway use explicit 0.0.0.0/0 or ::/0 destinations.

The second column contains the default gateway or a gateway through which a host or network can be accessed.

The third column is deprecated; it used to contain the IPv4 netmask of the destination. For IPv6 routes, the default route, or when using a prefix-length (CIDR notation) in the first column, enter a dash (-) here.

The fourth column contains the name of the interface. If you leave it empty using a dash (-), it can cause unintended behavior in /etc/sysconfig/network/routes. For more information, see the routes man page.

An (optional) fifth column can be used to specify special options. For details, see the routes man page.

Example 13.5: Common network interfaces and some static routes
# --- IPv4 routes in CIDR prefix notation:
# Destination     [Gateway]         -                  Interface
127.0.0.0/8       -                 -                  lo
204.127.235.0/24  -                 -                  eth0
default           204.127.235.41    -                  eth0
207.68.156.51/32  207.68.145.45     -                  eth1
192.168.0.0/16    207.68.156.51     -                  eth1

# --- IPv4 routes in deprecated netmask notation"
# Destination     [Dummy/Gateway]   Netmask            Interface
#
127.0.0.0         0.0.0.0           255.255.255.0      lo
204.127.235.0     0.0.0.0           255.255.255.0      eth0
default           204.127.235.41    0.0.0.0            eth0
207.68.156.51     207.68.145.45     255.255.255.255    eth1
192.168.0.0       207.68.156.51     255.255.0.0        eth1

# --- IPv6 routes are always using CIDR notation:
# Destination     [Gateway]                -           Interface
2001:DB8:100::/64 -                        -           eth0
2001:DB8:100::/32 fe80::216:3eff:fe6d:c042 -           eth0

13.6.2.8 /var/run/netconfig/resolv.conf Edit source

The domain to which the host belongs is specified in /var/run/netconfig/resolv.conf (keyword search). Up to six domains with a total of 256 characters can be specified with the search option. When resolving a name that is not fully qualified, an attempt is made to generate one by attaching the individual search entries. Up to three name servers can be specified with the nameserver option, each on a line of its own. Comments are preceded by hash mark or semicolon signs (# or ;). As an example, see Example 13.6, “/var/run/netconfig/resolv.conf.

However, /etc/resolv.conf should not be edited by hand. It is generated by the netconfig script and is a symbolic link to /run/netconfig/resolv.conf. To define static DNS configuration without using YaST, edit the appropriate variables manually in the /etc/sysconfig/network/config file:

NETCONFIG_DNS_STATIC_SEARCHLIST

list of DNS domain names used for host name lookup

NETCONFIG_DNS_STATIC_SERVERS

list of name server IP addresses to use for host name lookup

NETCONFIG_DNS_FORWARDER

the name of the DNS forwarder that needs to be configured, for example bind or resolver

NETCONFIG_DNS_RESOLVER_OPTIONS

arbitrary options that will be written to /var/run/netconfig/resolv.conf, for example:

debug attempts:1 timeout:10

For more information, see the resolv.conf man page.

NETCONFIG_DNS_RESOLVER_SORTLIST

list of up to 10 items, for example:

130.155.160.0/255.255.240.0 130.155.0.0

For more information, see the resolv.conf man page.

To disable DNS configuration using netconfig, set NETCONFIG_DNS_POLICY=''. For more information about netconfig, see the netconfig(8) man page (man 8 netconfig).

Example 13.6: /var/run/netconfig/resolv.conf
# Our domain
search example.com
#
# We use dns.example.com (192.168.1.116) as nameserver
nameserver 192.168.1.116

13.6.2.9 /sbin/netconfig Edit source

netconfig is a modular tool to manage additional network configuration settings. It merges statically defined settings with settings provided by autoconfiguration mechanisms as DHCP or PPP according to a predefined policy. The required changes are applied to the system by calling the netconfig modules that are responsible for modifying a configuration file and restarting a service or a similar action.

netconfig recognizes three main actions. The netconfig modify and netconfig remove commands are used by daemons such as DHCP or PPP to provide or remove settings to netconfig. Only the netconfig update command is available for the user:

modify

The netconfig modify command modifies the current interface and service specific dynamic settings and updates the network configuration. Netconfig reads settings from standard input or from a file specified with the --lease-file FILENAME option and internally stores them until a system reboot (or the next modify or remove action). Already existing settings for the same interface and service combination are overwritten. The interface is specified by the -i INTERFACE_NAME parameter. The service is specified by the -s SERVICE_NAME parameter.

remove

The netconfig remove command removes the dynamic settings provided by an editing action for the specified interface and service combination and updates the network configuration. The interface is specified by the -i INTERFACE_NAME parameter. The service is specified by the -s SERVICE_NAME parameter.

update

The netconfig update command updates the network configuration using current settings. This is useful when the policy or the static configuration has changed. Use the -m MODULE_TYPE parameter to update a specified service only (dns, nis, or ntp).

The netconfig policy and the static configuration settings are defined either manually or using YaST in the /etc/sysconfig/network/config file. The dynamic configuration settings provided by autoconfiguration tools such as DHCP or PPP are delivered directly by these tools with the netconfig modify and netconfig remove actions. When NetworkManager is enabled, netconfig (in policy mode auto) uses only NetworkManager settings, ignoring settings from any other interfaces configured using the traditional ifup method. If NetworkManager does not provide any setting, static settings are used as a fallback. A mixed usage of NetworkManager and the wicked method is not supported.

For more information about netconfig, see man 8 netconfig.

13.6.2.10 /etc/hosts Edit source

In this file, shown in Example 13.7, “/etc/hosts, IP addresses are assigned to host names. If no name server is implemented, all hosts to which an IP connection will be set up must be listed here. For each host, enter a line consisting of the IP address, the fully qualified host name, and the host name into the file. The IP address must be at the beginning of the line and the entries separated by blanks and tabs. Comments are always preceded by the # sign.

Example 13.7: /etc/hosts
127.0.0.1 localhost
192.168.2.100 jupiter.example.com jupiter
192.168.2.101 venus.example.com venus

13.6.2.11 /etc/networks Edit source

Here, network names are converted to network addresses. The format is similar to that of the hosts file, except the network names precede the addresses. See Example 13.8, “/etc/networks.

Example 13.8: /etc/networks
loopback     127.0.0.0
localnet     192.168.0.0

13.6.2.12 /etc/host.conf Edit source

Name resolution—the translation of host and network names via the resolver library—is controlled by this file. This file is only used for programs linked to libc4 or libc5. For current glibc programs, refer to the settings in /etc/nsswitch.conf. Each parameter must always be entered on a separate line. Comments are preceded by a # sign. Table 13.2, “Parameters for /etc/host.conf” shows the parameters available. A sample /etc/host.conf is shown in Example 13.9, “/etc/host.conf.

Table 13.2: Parameters for /etc/host.conf

order hosts, bind

Specifies in which order the services are accessed for the name resolution. Available arguments are (separated by blank spaces or commas):

hosts: searches the /etc/hosts file

bind: accesses a name server

nis: uses NIS

multi on/off

Defines if a host entered in /etc/hosts can have multiple IP addresses.

nospoof on spoofalert on/off

These parameters influence the name server spoofing but do not exert any influence on the network configuration.

trim domainname

The specified domain name is separated from the host name after host name resolution (as long as the host name includes the domain name). This option is useful only if names from the local domain are in the /etc/hosts file, but should still be recognized with the attached domain names.

Example 13.9: /etc/host.conf
# We have named running
order hosts bind
# Allow multiple address
multi on

13.6.2.13 /etc/nsswitch.conf Edit source

The introduction of the GNU C Library 2.0 was accompanied by the introduction of the Name Service Switch (NSS). Refer to the nsswitch.conf(5) man page and The GNU C Library Reference Manual for details.

The order for queries is defined in the file /etc/nsswitch.conf. A sample nsswitch.conf is shown in Example 13.10, “/etc/nsswitch.conf. Comments are preceded by # signs. In this example, the entry under the hosts database means that a request is sent to /etc/hosts (files) via DNS (see Chapter 19, The domain name system).

Example 13.10: /etc/nsswitch.conf
passwd:     compat
group:      compat

hosts:      files dns
networks:   files dns

services:   db files
protocols:  db files
rpc:        files
ethers:     files
netmasks:   files
netgroup:   files nis
publickey:  files

bootparams: files
automount:  files nis
aliases:    files nis
shadow:     compat

The databases available over NSS are listed in Table 13.3, “Databases available via /etc/nsswitch.conf”. The configuration options for NSS databases are listed in Table 13.4, “Configuration options for NSS databases.

Table 13.3: Databases available via /etc/nsswitch.conf

aliases

Mail aliases implemented by sendmail; see man 5 aliases.

ethers

Ethernet addresses.

netmasks

List of networks and their subnet masks. Only needed, if you use subnetting.

group

User groups used by getgrent. See also the man page for group.

hosts

Host names and IP addresses, used by gethostbyname and similar functions.

netgroup

Valid host and user lists in the network for controlling access permissions; see the netgroup(5) man page.

networks

Network names and addresses, used by getnetent.

publickey

Public and secret keys for Secure_RPC used by NFS and NIS+.

passwd

User passwords, used by getpwent; see the passwd(5) man page.

protocols

Network protocols, used by getprotoent; see the protocols(5) man page.

rpc

Remote procedure call names and addresses, used by getrpcbyname and similar functions.

services

Network services, used by getservent.

shadow

Shadow passwords of users, used by getspnam; see the shadow(5) man page.

Table 13.4: Configuration options for NSS databases

files

directly access files, for example, /etc/aliases

db

access via a database

nis, nisplus

NIS, see also Book “Security and Hardening Guide”, Chapter 3 “Using NIS”

dns

can only be used as an extension for hosts and networks

compat

can only be used as an extension for passwd, shadow and group

13.6.2.14 /etc/nscd.conf Edit source

This file is used to configure nscd (name service cache daemon). See the nscd(8) and nscd.conf(5) man pages. By default, the system entries of passwd, groups and hostsare cached by nscd. This is important for the performance of directory services, like NIS and LDAP, because otherwise the network connection needs to be used for every access to names, groups or hosts.

If the caching for passwd is activated, it usually takes about fifteen seconds until a newly added local user is recognized. Reduce this waiting time by restarting nscd with:

> sudo systemctl restart nscd

13.6.2.15 /etc/HOSTNAME Edit source

/etc/HOSTNAME contains the fully qualified host name (FQHN). The fully qualified host name is the host name with the domain name attached. This file must contain only one line (in which the host name is set). It is read while the machine is booting.

13.6.3 Testing the configuration Edit source

Before you write your configuration to the configuration files, you can test it. To set up a test configuration, use the ip command. To test the connection, use the ping command.

The command ip changes the network configuration directly without saving it in the configuration file. Unless you enter your configuration in the correct configuration files, the changed network configuration is lost on reboot.

Note
Note: ifconfig and route are obsolete

The ifconfig and route tools are obsolete. Use ip instead. ifconfig, for example, limits interface names to 9 characters.

13.6.3.1 Configuring a network interface with ip Edit source

ip is a tool to show and configure network devices, routing, policy routing, and tunnels.

ip is a very complex tool. Its common syntax is ip OPTIONS OBJECT COMMAND. You can work with the following objects:

link

This object represents a network device.

address

This object represents the IP address of device.

neighbor

This object represents an ARP or NDISC cache entry.

route

This object represents the routing table entry.

rule

This object represents a rule in the routing policy database.

maddress

This object represents a multicast address.

mroute

This object represents a multicast routing cache entry.

tunnel

This object represents a tunnel over IP.

If no command is given, the default command is used (usually list).

Change the state of a device with the command:

> sudo ip link set DEV_NAME

For example, to deactivate device eth0, enter

> sudo ip link set eth0 down

To activate it again, use

> sudo ip link set eth0 up
Tip
Tip: Disconnecting NIC device

If you deactivate a device with

> sudo ip link set DEV_NAME down

it disables the network interface on a software level.

If you want to simulate losing the link as if the Ethernet cable is unplugged or the connected switch is turned off, run

> sudo ip link set DEV_NAME carrier off

For example, while ip link set DEV_NAME down drops all routes using DEV_NAME, ip link set DEV carrier off does not. Be aware that carrier off requires support from the network device driver.

To connect the device back to the physical network, run

> sudo ip link set DEV_NAME carrier on

After activating a device, you can configure it. To set the IP address, use

> sudo ip addr add IP_ADDRESS + dev DEV_NAME

For example, to set the address of the interface eth0 to 192.168.12.154/30 with standard broadcast (option brd), enter

> sudo ip addr add 192.168.12.154/30 brd + dev eth0

To have a working connection, you must also configure the default gateway. To set a gateway for your system, enter

> sudo ip route add default via gateway_ip_address

To display all devices, use

> sudo ip link ls

To display the running interfaces only, use

> sudo ip link ls up

To print interface statistics for a device, enter

> sudo ip -s link ls DEV_NAME

To view additional useful information, specifically about virtual network devices, enter

> sudo ip -d link ls DEV_NAME

Moreover, to view network layer (IPv4, IPv6) addresses of your devices, enter

> sudo ip addr

In the output, you can find information about MAC addresses of your devices. To show all routes, use

> sudo ip route show

For more information about using ip, enter ip help or see the man 8 ip manual page. The help option is also available for all ip subcommands, such as:

> sudo ip addr help

Find the ip manual in /usr/share/doc/packages/iproute2/ip-cref.pdf.

13.6.3.2 Testing a connection with ping Edit source

The ping command is the standard tool for testing whether a TCP/IP connection works. It uses the ICMP protocol to send a small data packet, ECHO_REQUEST datagram, to the destination host, requesting an immediate reply. If this works, ping displays a message to that effect. This indicates that the network link is functioning.

ping does more than only test the function of the connection between two computers: it also provides some basic information about the quality of the connection. In Example 13.11, “Output of the command ping”, you can see an example of the ping output. The second-to-last line contains information about the number of transmitted packets, packet loss, and total time of ping running.

As the destination, you can use a host name or IP address, for example, ping example.com or ping 192.168.3.100. The program sends packets until you press CtrlC.

If you only need to check the functionality of the connection, you can limit the number of the packets with the -c option. For example to limit ping to three packets, enter ping -c 3 example.com.

Example 13.11: Output of the command ping
ping -c 3 example.com
PING example.com (192.168.3.100) 56(84) bytes of data.
64 bytes from example.com (192.168.3.100): icmp_seq=1 ttl=49 time=188 ms
64 bytes from example.com (192.168.3.100): icmp_seq=2 ttl=49 time=184 ms
64 bytes from example.com (192.168.3.100): icmp_seq=3 ttl=49 time=183 ms
--- example.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2007ms
rtt min/avg/max/mdev = 183.417/185.447/188.259/2.052 ms

The default interval between two packets is one second. To change the interval, ping provides the option -i. For example, to increase the ping interval to ten seconds, enter ping -i 10 example.com.

In a system with multiple network devices, it is sometimes useful to send the ping through a specific interface address. To do so, use the -I option with the name of the selected device, for example, ping -I wlan1 example.com.

For more options and information about using ping, enter ping -h or see the ping (8) man page.

Tip
Tip: Pinging IPv6 addresses

For IPv6 addresses use the ping6 command. Note, to ping link-local addresses, you must specify the interface with -I. The following command works, if the address is reachable via eth1:

ping6 -I eth1 fe80::117:21ff:feda:a425

13.6.4 Unit files and start-up scripts Edit source

Apart from the configuration files described above, there are also systemd unit files and various scripts that load the network services while the machine is booting. These are started when the system is switched to the multi-user.target target. Some of these unit files and scripts are described in Some unit files and start-up scripts for network programs. For more information about systemd, see Chapter 10, The systemd daemon and for more information about the systemd targets, see the man page of systemd.special (man systemd.special).

Some unit files and start-up scripts for network programs
network.target

network.target is the systemd target for networking, but its mean depends on the settings provided by the system administrator.

For more information, see http://www.freedesktop.org/wiki/Software/systemd/NetworkTarget/.

multi-user.target

multi-user.target is the systemd target for a multiuser system with all required network services.

rpcbind

Starts the rpcbind utility that converts RPC program numbers to universal addresses. It is needed for RPC services, such as an NFS server.

ypserv

Starts the NIS server.

ypbind

Starts the NIS client.

/etc/init.d/nfsserver

Starts the NFS server.

/etc/init.d/postfix

Controls the postfix process.

13.7 Basic router setup Edit source

A router is a networking device that delivers and receives data (network packets) to or from more than one network back and forth. You often use a router to connect your local network to the remote network (Internet) or to connect local network segments. With openSUSE Leap you can build a router with features such as NAT (Network Address Translation) or advanced firewalling.

The following are basic steps to turn openSUSE Leap into a router.

  1. Enable forwarding, for example in /etc/sysctl.d/50-router.conf

    net.ipv4.conf.all.forwarding = 1
    net.ipv6.conf.all.forwarding = 1

    Then provide a static IPv4 and IPv6 IP setup for the interfaces. Enabling forwarding disables several mechanisms, for example IPv6 does not accept an IPv6 RA (router advertisement) anymore, which also prevents the creation of a default route.

  2. In many situations (for example, when you can reach the same network via more than one interface, or when VPN usually is used and already on normal multi-home hosts), you must disable the IPv4 reverse path filter (this feature does not currently exist for IPv6):

    net.ipv4.conf.all.rp_filter = 0

    You can also filter with firewall settings instead.

  3. To accept an IPv6 RA (from the router on an external, uplink, or ISP interface) and create a default (or also a more specific) IPv6 route again, set:

    net.ipv6.conf.${ifname}.accept_ra = 2
    net.ipv6.conf.${ifname}.autoconf = 0

    (Note: eth0.42 needs to be written as eth0/42 in a dot-separated sysfs path.)

More router behavior and forwarding dependencies are described in https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt.

To provide IPv6 on your internal (DMZ) interfaces, and announce yourself as an IPv6 router and autoconf networks to the clients, install and configure radvd in /etc/radvd.conf, for example:

interface eth0
{
    IgnoreIfMissing on;         # do not fail if interface missed

    AdvSendAdvert on;           # enable sending RAs
    AdvManagedFlag on;          # IPv6 addresses managed via DHCPv6
    AdvOtherConfigFlag on;      # DNS, NTP... only via DHCPv6

    AdvDefaultLifetime 3600;    # client default route lifetime of 1 hour

    prefix 2001:db8:0:1::/64    # (/64 is default and required for autoconf)
    {
        AdvAutonomous off;         # Disable address autoconf (DHCPv6 only)

        AdvValidLifetime 3600;     # prefix (autoconf addr) is valid 1 h
        AdvPreferredLifetime 1800; # prefix (autoconf addr) is preferred 1/2 h
    }
}

Configure the firewall to masquerade traffic with NAT from the LAN into the WAN and to block inbound traffic on the WAN interface:

> sudo firewall-cmd --permanent --zone=external --change-interface=WAN_INTERFACE
> sudo firewall-cmd --permanent --zone=external --add-masquerade
> sudo firewall-cmd --permanent --zone=internal --change-interface=LAN_INTERFACE
> sudo firewall-cmd --reload

13.8 Setting up bonding devices Edit source

For some systems, there is a desire to implement network connections that comply to more than the standard data security or availability requirements of a typical Ethernet device. In these cases, several Ethernet devices can be aggregated to a single bonding device.

The configuration of the bonding device is done by means of bonding module options. The behavior is mainly affected by the mode of the bonding device. By default, this is active-backup which means that a different bond port will become active if the active port fails. The following bonding modes are available:

0 (balance-rr)

Packets are transmitted in round-robin fashion from the first to the last available interface. Provides fault tolerance and load balancing.

1 (active-backup)

Only one network interface is active. If it fails, a different interface becomes active. This setting is the default for openSUSE Leap. Provides fault tolerance.

2 (balance-xor)

Traffic is split between all available interfaces based on the number of devices included in the bonding. It requires support from the switch. Provides fault tolerance and load balancing.

3 (broadcast)

All traffic is broadcast on all interfaces. Requires support from the switch. Provides fault tolerance.

4 (802.3ad)

Aggregates interfaces into groups that share the same speed and duplex settings. Requires ethtool support in the interface drivers, and a switch that supports and is configured for IEEE 802.3ad Dynamic link aggregation. Provides fault tolerance and load balancing.

5 (balance-tlb)

Adaptive transmit load balancing. Requires ethtool support in the interface drivers but not switch support. Provides fault tolerance and load balancing.

6 (balance-alb)

Adaptive load balancing. Requires ethtool support in the interface drivers but not switch support. Provides fault tolerance and load balancing.

For a more detailed description of the modes, see https://www.kernel.org/doc/Documentation/networking/bonding.txt.

Tip
Tip: Bonding and Xen

Using bonding devices is only of interest for machines where you have multiple real network cards available. In most configurations, this means that you should use the bonding configuration only in Dom0. Only if you have multiple network cards assigned to a VM Guest system it may also be useful to set up the bond in a VM Guest.

To configure a bonding device, use the following procedure:

  1. Run YaST › System › Network Settings.

  2. Use Add and change the Device Type to Bond. Proceed with Next.

  3. Select how to assign the IP address to the bonding device. Three methods are at your disposal:

    • No IP Address

    • Dynamic Address (with DHCP or Zeroconf)

    • Statically assigned IP Address

    Use the method that is appropriate for your environment.

  4. In the Bond Ports tab, select the Ethernet devices that should be included into the bond by activating the related check box.

  5. Edit the Bond Driver Options and choose a bonding mode.

  6. Make sure that the parameter miimon=100 is added to the Bond Driver Options. Without this parameter, the data integrity is not checked regularly.

  7. Click Next and leave YaST with OK to create the device.

13.8.1 Hotplugging of bond ports Edit source

In specific network environments (such as High Availability), there are cases when you need to replace a bond port interface with another one. The reason may be a constantly failing network device. The solution is to set up hotplugging of bond ports.

The bond is configured as usual (according to man 5 ifcfg-bonding), for example:

ifcfg-bond0
          STARTMODE='auto' # or 'onboot'
          BOOTPROTO='static'
          IPADDR='192.168.0.1/24'
          BONDING_MASTER='yes'
          BONDING_SLAVE_0='eth0'
          BONDING_SLAVE_1='eth1'
          BONDING_MODULE_OPTS='mode=active-backup miimon=100'

The bond ports are specified with STARTMODE=hotplug and BOOTPROTO=none:

ifcfg-eth0
          STARTMODE='hotplug'
          BOOTPROTO='none'

ifcfg-eth1
          STARTMODE='hotplug'
          BOOTPROTO='none'

BOOTPROTO=none uses the ethtool options (when provided), but does not set the link up on ifup eth0. The reason is that the bond port interface is controlled by the bond device.

STARTMODE=hotplug causes the bond port interface to join the bond automatically when it is available.

The udev rules in /etc/udev/rules.d/70-persistent-net.rules need to be changed to match the device by bus ID (udev KERNELS keyword equal to "SysFS BusID" as visible in hwinfo --netcard) instead of by MAC address. This allows replacement of defective hardware (a network card in the same slot but with a different MAC) and prevents confusion when the bond changes the MAC address of all its bond ports.

For example:

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
KERNELS=="0000:00:19.0", ATTR{dev_id}=="0x0", ATTR{type}=="1",
KERNEL=="eth*", NAME="eth0"

At boot time, the systemd network.service does not wait for the hotplug bond ports, but for the bond to become ready, which requires at least one available bond port. When one of the bond port interfaces gets removed (unbind from NIC driver, rmmod of the NIC driver or true PCI hotplug remove) from the system, the kernel removes it from the bond automatically. When a new card is added to the system (replacement of the hardware in the slot), udev renames it using the bus-based persistent name rule to the name of the bond port, and calls ifup for it. The ifup call automatically joins it into the bond.

13.9 Setting up team devices for Network Teaming Edit source

The term link aggregation is the general term which describes combining (or aggregating) a network connection to provide a logical layer. Sometimes you find the terms channel teaming, Ethernet bonding, port truncating, etc. which are synonyms and refer to the same concept.

This concept is widely known as bonding and was originally integrated into the Linux kernel (see Section 13.8, “Setting up bonding devices” for the original implementation). The term Network Teaming is used to refer to the new implementation of this concept.

The main difference between bonding and Network Teaming is that teaming supplies a set of small kernel modules responsible for providing an interface for teamd instances. Everything else is handled in user space. This is different from the original bonding implementation which contains all of its functionality exclusively in the kernel. For a comparison refer to Table 13.5, “Feature comparison between bonding and team”.

Table 13.5: Feature comparison between bonding and team
FeatureBondingTeam
broadcast, round-robin TX policyyesyes
active-backup TX policyyesyes
LACP (802.3ad) supportyesyes
hash-based TX policyyesyes
user can set hash functionnoyes
TX load-balancing support (TLB)yesyes
TX load-balancing support for LACPnoyes
Ethtool link monitoringyesyes
ARP link monitoringyesyes
NS/NA (IPV6) link monitoringnoyes
RCU locking on TX/RX pathsnoyes
port prio and stickinessnoyes
separate per-port link monitoring setupnoyes
multiple link monitoring setuplimitedyes
VLAN supportyesyes
multiple device stackingyesyes
Source: http://libteam.org/files/teamdev.pp.pdf

Both implementations, bonding and Network Teaming, can be used in parallel. Network Teaming is an alternative to the existing bonding implementation. It does not replace bonding.

Network Teaming can be used for different use cases. The two most important use cases are explained later and involve:

  • Load balancing between different network devices.

  • Failover from one network device to another in case one of the devices should fail.

Currently, there is no YaST module to support creating a teaming device. You need to configure Network Teaming manually. The general procedure is shown below which can be applied for all your Network Teaming configurations:

Procedure 13.1: General procedure
  1. Install the package libteam-tools:

    > sudo zypper in libteam-tools
  2. Create a configuration file under /etc/sysconfig/network/. Usually it will be ifcfg-team0. If you need more than one Network Teaming device, give them ascending numbers.

    This configuration file contains several variables which are explained in the man pages (see man ifcfg and man ifcfg-team). An example configuration can be found in your system in the file /etc/sysconfig/network/ifcfg.template.

  3. Remove the configuration files of the interfaces which will be used for the teaming device (usually ifcfg-eth0 and ifcfg-eth1).

    It is recommended to make a backup and remove both files. Wicked will re-create the configuration files with the necessary parameters for teaming.

  4. Optionally, check if everything is included in Wicked's configuration file:

    > sudo wicked show-config
  5. Start the Network Teaming device team0:

    > sudo wicked ifup all team0

    In case you need additional debug information, use the option --debug all after the all subcommand.

  6. Check the status of the Network Teaming device. This can be done by the following commands:

    • Get the state of the teamd instance from Wicked:

      > sudo wicked ifstatus --verbose team0
    • Get the state of the entire instance:

      > sudo teamdctl team0 state
    • Get the systemd state of the teamd instance:

      > sudo systemctl status teamd@team0

    Each of them shows a slightly different view depending on your needs.

  7. In case you need to change something in the ifcfg-team0 file afterward, reload its configuration with:

    > sudo wicked ifreload team0

Do not use systemctl for starting or stopping the teaming device! Instead, use the wicked command as shown above.

To completely remove the team device, use this procedure:

Procedure 13.2: Removing a team device
  1. Stop the Network Teaming device team0:

    > sudo wicked ifdown team0
  2. Rename the file /etc/sysconfig/network/ifcfg-team0 to /etc/sysconfig/network/.ifcfg-team0. Inserting a dot in front of the file name makes it invisible for wicked. If you really do not need the configuration anymore, you can also remove the file.

  3. Reload the configuration:

    > sudo wicked ifreload all

13.9.1 Use case: load balancing with Network Teaming Edit source

Load balancing is used to improve bandwidth. Use the following configuration file to create a Network Teaming device with load balancing capabilities. Proceed with Procedure 13.1, “General procedure” to set up the device. Check the output with teamdctl.

Example 13.12: Configuration for load balancing with Network Teaming
STARTMODE=auto 1
BOOTPROTO=static 2
IPADDRESS="192.168.1.1/24" 2
IPADDR6="fd00:deca:fbad:50::1/64" 2

TEAM_RUNNER="loadbalance" 3
TEAM_LB_TX_HASH="ipv4,ipv6,eth,vlan"
TEAM_LB_TX_BALANCER_NAME="basic"
TEAM_LB_TX_BALANCER_INTERVAL="100"

TEAM_PORT_DEVICE_0="eth0" 4
TEAM_PORT_DEVICE_1="eth1" 4

TEAM_LW_NAME="ethtool" 5
TEAM_LW_ETHTOOL_DELAY_UP="10" 6
TEAM_LW_ETHTOOL_DELAY_DOWN="10" 6

1

Controls the start of the teaming device. The value of auto means, the interface will be set up when the network service is available and will be started automatically on every reboot.

In case you need to control the device yourself (and prevent it from starting automatically), set STARTMODE to manual.

2

Sets a static IP address (here 192.168.1.1 for IPv4 and fd00:deca:fbad:50::1 for IPv6).

If the Network Teaming device should use a dynamic IP address, set BOOTPROTO="dhcp" and remove (or comment) the line with IPADDRESS and IPADDR6.

3

Sets TEAM_RUNNER to loadbalance to activate the load balancing mode.

4

Specifies one or more devices which should be aggregated to create the Network Teaming device.

5

Defines a link watcher to monitor the state of subordinate devices. The default value ethtool checks only if the device is up and accessible. This makes this check fast enough. However, it does not check if the device can really send or receive packets.

If you need a higher confidence in the connection, use the arp_ping option. This sends pings to an arbitrary host (configured in the TEAM_LW_ARP_PING_TARGET_HOST variable). The Network Teaming device is considered to be up only if the replies are received.

6

Defines the delay in milliseconds between the link coming up (or down) and the runner being notified.

13.9.2 Use case: failover with Network Teaming Edit source

Failover is used to ensure high availability of a critical Network Teaming device by involving a parallel backup network device. The backup network device is running all the time and takes over if and when the main device fails.

Use the following configuration file to create a Network Teaming device with failover capabilities. Proceed with Procedure 13.1, “General procedure” to set up the device. Check the output with teamdctl.

Example 13.13: Configuration for DHCP Network Teaming device
STARTMODE=auto 1
BOOTPROTO=static 2
IPADDR="192.168.1.2/24" 2
IPADDR6="fd00:deca:fbad:50::2/64" 2

TEAM_RUNNER=activebackup 3
TEAM_PORT_DEVICE_0="eth0" 4
TEAM_PORT_DEVICE_1="eth1" 4

TEAM_LW_NAME=ethtool 5
TEAM_LW_ETHTOOL_DELAY_UP="10" 6
TEAM_LW_ETHTOOL_DELAY_DOWN="10" 6

1

Controls the start of the teaming device. The value of auto means the interface will be set up when the network service is available and will be started automatically on every reboot.

In case you need to control the device yourself (and prevent it from starting automatically), set STARTMODE to manual.

2

Sets a static IP address (here 192.168.1.2 for IPv4 and fd00:deca:fbad:50::2 for IPv6).

If the Network Teaming device should use a dynamic IP address, set BOOTPROTO="dhcp" and remove (or comment) the line with IPADDRESS and IPADDR6.

3

Sets TEAM_RUNNER to activebackup to activate the failover mode.

4

Specifies one or more devices which should be aggregated to create the Network Teaming device.

5

Defines a link watcher to monitor the state of subordinate devices. The default value ethtool checks only if the device is up and accessible. This makes this check fast enough. However, it does not check if the device can really send or receive packets.

If you need a higher confidence in the connection, use the arp_ping option. This sends pings to an arbitrary host (configured in the TEAM_LW_ARP_PING_TARGET_HOST variable). Only if the replies are received, the Network Teaming device is considered to be up.

6

Defines the delay in milliseconds between the link coming up (or down) and the runner being notified.

13.9.3 Use case: VLAN over team device Edit source

VLAN is an abbreviation of Virtual Local Area Network. It allows the running of multiple logical (virtual) Ethernets over one single physical Ethernet. It logically splits the network into different broadcast domains so that packets are only switched between ports that are designated for the same VLAN.

The following use case creates two static VLANs on top of a team device:

  • vlan0, bound to the IP address 192.168.10.1

  • vlan1, bound to the IP address 192.168.20.1

Proceed as follows:

  1. Enable the VLAN tags on your switch. To use load balancing for your team device, your switch needs to be capable of Link Aggregation Control Protocol (LACP) (802.3ad). Consult your hardware manual about the details.

  2. Decide if you want to use load balancing or failover for your team device. Set up your team device as described in Section 13.9.1, “Use case: load balancing with Network Teaming” or Section 13.9.2, “Use case: failover with Network Teaming”.

  3. In /etc/sysconfig/network create a file ifcfg-vlan0 with the following content:

    STARTMODE="auto"
    BOOTPROTO="static" 1
    IPADDR='192.168.10.1/24' 2
    ETHERDEVICE="team0" 3
    VLAN_ID="0" 4
    VLAN='yes'

    1

    Defines a fixed IP address, specified in IPADDR.

    2

    Defines the IP address, here with its netmask.

    3

    Contains the real interface to use for the VLAN interface, here our team device (team0).

    4

    Specifies a unique ID for the VLAN. Preferably, the file name and the VLAN_ID corresponds to the name ifcfg-vlanVLAN_ID. In our case VLAN_ID is 0 which leads to the file name ifcfg-vlan0.

  4. Copy the file /etc/sysconfig/network/ifcfg-vlan0 to /etc/sysconfig/network/ifcfg-vlan1 and change the following values:

    • IPADDR from 192.168.10.1/24 to 192.168.20.1/24.

    • VLAN_ID from 0 to 1.

  5. Start the two VLANs:

    # wicked ifup vlan0 vlan1
  6. Check the output of ifconfig:

    # ifconfig -a
    [...]
    vlan0     Link encap:Ethernet  HWaddr 08:00:27:DC:43:98
              inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fedc:4398/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 b)  TX bytes:816 (816.0 b)
    
    vlan1     Link encap:Ethernet  HWaddr 08:00:27:DC:43:98
              inet addr:192.168.20.1 Bcast:192.168.20.255 Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fedc:4398/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 b)  TX bytes:816 (816.0 b)

13.10 Software-defined networking with Open vSwitch Edit source

Software-defined networking (SDN) means separating the system that controls where traffic is sent (the control plane) from the underlying system that forwards traffic to the selected destination (the data plane, also called the forwarding plane). This means that the functions previously fulfilled by a single, usually inflexible switch can now be separated between a switch (data plane) and its controller (control plane). In this model, the controller is programmable and can be very flexible and adapt quickly to changing network conditions.

Open vSwitch is software that implements a distributed virtual multilayer switch that is compatible with the OpenFlow protocol. OpenFlow allows a controller application to modify the configuration of a switch. OpenFlow is layered onto the TCP protocol and is implemented in a range of hardware and software. A single controller can thus drive multiple, very different switches.

13.10.1 Advantages of Open vSwitch Edit source

Software-defined networking with Open vSwitch brings several advantages with it, especially when you used together with virtual machines:

  • Networking states can be identified easily.

  • Networks and their live state can be moved from one host to another.

  • Network dynamics are traceable and external software can be enabled to respond to them.

  • You can apply and manipulate tags in network packets to identify which machine they are coming from or going to and maintain other networking context. Tagging rules can be configured and migrated.

  • Open vSwitch implements the GRE protocol (Generic Routing Encapsulation). This allows you, for example, to connect private VM networks to each other.

  • Open vSwitch can be used on its own, but is designed to integrate with networking hardware and can control hardware switches.

13.10.2 Installing Open vSwitch Edit source

  1. Install Open vSwitch and supplementary packages:

    # zypper install openvswitch openvswitch-switch

    If you plan to use Open vSwitch together with the KVM hypervisor, additionally install tunctl . If you plan to use Open vSwitch together with the Xen hypervisor, additionally install openvswitch-kmp-xen .

  2. Enable the Open vSwitch service:

    # systemctl enable openvswitch
  3. Either restart the computer or use systemctl to start the Open vSwitch service immediately:

    # systemctl start openvswitch
  4. To check whether Open vSwitch was activated correctly, use:

    # systemctl status openvswitch

13.10.3 Overview of Open vSwitch daemons and utilities Edit source

Open vSwitch consists of several components. Among them are a kernel module and various user space components. The kernel module is used for accelerating the data path, but is not necessary for a minimal Open vSwitch installation.

13.10.3.1 Daemons Edit source

The central executables of Open vSwitch are its two daemons. When you start the openvswitch service, you are indirectly starting them.

The main Open vSwitch daemon (ovs-vswitchd) provides the implementation of a switch. The Open vSwitch database daemon (ovsdb-server) serves the database that stores the configuration and state of Open vSwitch.

13.10.3.2 Utilities Edit source

Open vSwitch also comes with several utilities that help you work with it. The following list is not exhaustive, but instead describes important commands only.

ovsdb-tool

Create, upgrade, compact, and query Open vSwitch databases. Do transactions on Open vSwitch databases.

ovs-appctl

Configure a running ovs-vswitchd or ovsdb-server daemon.

ovs-dpctl, ovs-dpctl-top

Create, modify, visualize, and delete data paths. Using this tool can interfere with ovs-vswitchd also performing data path management. Therefore, it is often used for diagnostics only.

ovs-dpctl-top creates a top-like visualization for data paths.

ovs-ofctl

Manage any switches adhering to the OpenFlow protocol. ovs-ofctl is not limited to interacting with Open vSwitch.

ovs-vsctl

Provides a high-level interface to the configuration database. It can be used to query and modify the database. In effect, it shows the status of ovs-vswitchd and can be used to configure it.

13.10.4 Creating a bridge with Open vSwitch Edit source

The following example configuration uses the Wicked network service that is used by default on openSUSE Leap. To learn more about Wicked, see Section 13.6, “Configuring a network connection manually”.

When you have installed and started Open vSwitch, proceed as follows:

  1. To configure a bridge for use by your virtual machine, create a file with content like this:

    STARTMODE='auto'1
    BOOTPROTO='dhcp'2
    OVS_BRIDGE='yes'3
    OVS_BRIDGE_PORT_DEVICE_1='eth0'4

    1

    Set up the bridge automatically when the network service is started.

    2

    The protocol to use for configuring the IP address.

    3

    Mark the configuration as an Open vSwitch bridge.

    4

    Choose which device/devices should be added to the bridge. To add more devices, append additional lines for each of them to the file:

    OVS_BRIDGE_PORT_DEVICE_SUFFIX='DEVICE'

    The SUFFIX can be any alphanumeric string. However, to avoid overwriting a previous definition, make sure the SUFFIX of each device is unique.

    Save the file in the directory /etc/sysconfig/network under the name ifcfg-br0. Instead of br0, you can use any name you want. However, the file name needs to begin with ifcfg-.

    To learn about further options, refer to the man pages of ifcfg (man 5 ifcfg) and ifcfg-ovs-bridge (man 5 ifcfg-ovs-bridge).

  2. Now start the bridge:

    # wicked ifup br0

    When Wicked is done, it should output the name of the bridge and next to it the state up.

13.10.5 Using Open vSwitch directly with KVM Edit source

After having created the bridge as described in Section 13.10.4, “Creating a bridge with Open vSwitch, you can use Open vSwitch to manage the network access of virtual machines created with KVM/QEMU.

  1. To be able to best use the capabilities of Wicked, make some further changes to the bridge configured before. Open the previously created /etc/sysconfig/network/ifcfg-br0 and append a line for another port device:

    OVS_BRIDGE_PORT_DEVICE_2='tap0'

    Additionally, set BOOTPROTO to none. The file should now look like this:

    STARTMODE='auto'
    BOOTPROTO='none'
    OVS_BRIDGE='yes'
    OVS_BRIDGE_PORT_DEVICE_1='eth0'
    OVS_BRIDGE_PORT_DEVICE_2='tap0'

    The new port device tap0 will be configured in the next step.

  2. Now add a configuration file for the tap0 device:

    STARTMODE='auto'
    BOOTPROTO='none'
    TUNNEL='tap'

    Save the file in the directory /etc/sysconfig/network under the name ifcfg-tap0.

    Tip
    Tip: Allowing other users to access the tap device

    To be able to use this tap device from a virtual machine started as a user who is not root, append:

    TUNNEL_SET_OWNER=USER_NAME

    To allow access for an entire group, append:

    TUNNEL_SET_GROUP=GROUP_NAME
  3. Finally, open the configuration for the device defined as the first OVS_BRIDGE_PORT_DEVICE. If you did not change the name, that should be eth0. Therefore, open /etc/sysconfig/network/ifcfg-eth0 and make sure that the following options are set:

    STARTMODE='auto'
    BOOTPROTO='none'

    If the file does not exist yet, create it.

  4. Restart the bridge interface using Wicked:

    # wicked ifreload br0

    This will also trigger a reload of the newly defined bridge port devices.

  5. To start a virtual machine, use, for example:

    # qemu-kvm \
    -drive file=/PATH/TO/DISK-IMAGE1 \
    -m 512 -net nic,vlan=0,macaddr=00:11:22:EE:EE:EE \
    -net tap,ifname=tap0,script=no,downscript=no2

    1

    The path to the QEMU disk image you want to start.

    2

    Use the tap device (tap0) created before.

    For further information on the usage of KVM/QEMU, see Book “Virtualization Guide.

13.10.6 Using Open vSwitch with libvirt Edit source

After having created the bridge as described before in Section 13.10.4, “Creating a bridge with Open vSwitch, you can add the bridge to an existing virtual machine managed with libvirt. Since libvirt has some support for Open vSwitch bridges already, you can use the bridge created in Section 13.10.4, “Creating a bridge with Open vSwitch without further changes to the networking configuration.

  1. Open the domain XML file for the intended virtual machine:

    # virsh edit VM_NAME

    Replace VM_NAME with the name of the desired virtual machine. This will open your default text editor.

  2. Find the networking section of the document by looking for a section starting with <interface type="..."> and ending in </interface>.

    Replace the existing section with a networking section that looks somewhat like this:

    <interface type='bridge'>
      <source bridge='br0'/>
      <virtualport type='openvswitch'/>
    </interface>
    Important
    Important: Compatibility of virsh iface-* and Virtual Machine Manager with Open vSwitch

    At the moment, the Open vSwitch compatibility of libvirt is not exposed through the virsh iface-* tools and Virtual Machine Manager. If you use any of these tools, your configuration can break.

  3. You can now start or restart the virtual machine as usual.

For further information on the usage of libvirt, see Book “Virtualization Guide.

13.10.7 More information Edit source

For more information on SDN, refer to the documentation section of the Open vSwitch project Web site at https://docs.openvswitch.org/en/latest/#documentation.

14 UEFI (Unified Extensible Firmware Interface) Edit source

UEFI (Unified Extensible Firmware Interface) is the interface between the firmware that comes with the system hardware, all the hardware components of the system, and the operating system.

UEFI is becoming more and more available on PC systems and thus is replacing the traditional PC-BIOS. UEFI, for example, properly supports 64-bit systems and offers secure booting (Secure Boot, firmware version 2.3.1c or better required), which is one of its most important features. Lastly, with UEFI a standard firmware will become available on all x86 platforms.

UEFI additionally offers the following advantages:

  • Booting from large disks (over 2 TiB) with a GUID Partition Table (GPT).

  • CPU-independent architecture and drivers.

  • Flexible pre-OS environment with network capabilities.

  • CSM (Compatibility Support Module) to support booting legacy operating systems via a PC-BIOS-like emulation.

For more information, see http://en.wikipedia.org/wiki/Unified_Extensible_Firmware_Interface. The following sections are not meant as a general UEFI overview; these are only hints about how certain features are implemented in openSUSE Leap.

14.1 Secure boot Edit source

In the world of UEFI, securing the bootstrapping process means establishing a chain of trust. The platform is the root of this chain of trust; in the context of openSUSE Leap, the mainboard and the on-board firmware could be considered the platform. In other words, it is the hardware vendor, and the chain of trust flows from that hardware vendor to the component manufacturers, the OS vendors, etc.

The trust is expressed via public key cryptography. The hardware vendor puts a so-called Platform Key (PK) into the firmware, representing the root of trust. The trust relationship with operating system vendors and others is documented by signing their keys with the Platform Key.

Finally, security is established by requiring that no code will be executed by the firmware unless it has been signed by one of these trusted keys—be it an OS boot loader, a driver located in the flash memory of certain PCI Express card or on disk, or be it an update of the firmware itself.

To use Secure Boot, you need to have your OS loader signed with a key trusted by the firmware, and you need the OS loader to verify that the kernel it loads can be trusted.

Key Exchange Keys (KEK) can be added to the UEFI key database. This way, you can use other certificates, if they are signed with the private part of the PK.

14.1.1 Implementation on openSUSE Leap Edit source

Microsoft’s Key Exchange Key (KEK) is installed by default.

Note
Note: GUID partitioning table (GPT) required

The Secure Boot feature is enabled by default on UEFI/x86_64 installations. You can find the Enable Secure Boot Support option in the Boot Code Options tab of the Boot Loader Settings dialog. It supports booting when the secure boot is activated in the firmware, while making it possible to boot when it is deactivated.

Secure boot support
Figure 14.1: Secure boot support

The Secure Boot feature requires that a GUID Partitioning Table (GPT) replaces the old partitioning with a Master Boot Record (MBR). If YaST detects EFI mode during the installation, it will try to create a GPT partition. UEFI expects to find the EFI programs on a FAT-formatted EFI System Partition (ESP).

Supporting UEFI Secure Boot requires having a boot loader with a digital signature that the firmware recognizes as a trusted key. That key is trusted by the firmware a priori, without requiring any manual intervention.

There are two ways of getting there. One is to work with hardware vendors to have them endorse a SUSE key, which SUSE then signs the boot loader with. The other way is to go through Microsoft’s Windows Logo Certification program to have the boot loader certified and have Microsoft recognize the SUSE signing key (that is, have it signed with their KEK). By now, SUSE got the loader signed by UEFI Signing Service (that is Microsoft in this case).

UEFI: secure boot process
Figure 14.2: UEFI: secure boot process

At the implementation layer, SUSE uses the shim loader which is installed by default. It is a smart solution that avoids legal issues, and simplifies the certification and signing step considerably. The shim loader’s job is to load a boot loader such as GRUB 2 and verify it; this boot loader in turn will load kernels signed by a SUSE key only.

There are two types of trusted users:

  • First, those who hold the keys. The Platform Key (PK) allows almost everything. The Key Exchange Key (KEK) allows all a PK can except changing the PK.

  • Second, anyone with physical access to the machine. A user with physical access can reboot the machine, and configure UEFI.

UEFI offers two types of variables to fulfill the needs of those users:

  • The first is the so-called Authenticated Variables, which can be updated from both within the boot process (the so-called Boot Services Environment) and the running OS. This can be done only when the new value of the variable is signed with the same key that the old value of the variable was signed with. And they can only be appended to or changed to a value with a higher serial number.

  • The second is the so-called Boot Services Only Variables. These variables are accessible to any code that runs during the boot process. After the boot process ends and before the OS starts, the boot loader must call the ExitBootServices call. After that, these variables are no longer accessible, and the OS cannot touch them.

UEFI key lists are of the first type, as this allows online updating, adding and blacklisting of keys, drivers and firmware fingerprints. It is the second type of variable, the Boot Services Only Variable, that helps to implement Secure Boot in a secure and open source-friendly manner, and thus compatible with GPLv3.

SUSE starts with shim—a small and simple EFI boot loader signed by SUSE and Microsoft.

This allows shim to load and execute.

shim then goes on to verify that the boot loader it wants to load is trusted. In a default situation shim will use an independent SUSE certificate embedded in its body. In addition, shim will allow to enroll additional keys, overriding the default SUSE key. In the following, we call them Machine Owner Keys or MOKs for short.

Next the boot loader will verify and then boot the kernel, and the kernel will do the same on the modules.

14.1.2 MOK (Machine Owner Key) Edit source

To replace specific kernels, drivers or other components that are part of the boot process, you need to use Machine Owner Keys (MOKs). The mokutil tool can help you to manage MOKs.

You can create a MOK enrollment request with mokutil. The request is stored in a UEFI runtime (RT) variable called MokNew. During the next boot, the shim boot loader detects MokNew and loads MokManager, which presents you with several options. You can use the Enroll key from disk and Enroll hash from disk options to add the key to the MokList. Use the Enroll MOK option to copy the key from the MokNew variable.

Enrolling a key from disk is normally done when the shim fails to load grub2 and falls back to loading MokManager. As MokNew does not exist yet, you have the option of locating the key on the UEFI partition.

14.1.3 Booting a custom kernel Edit source

The following is based on https://en.opensuse.org/openSUSE:UEFI#Booting_a_custom_kernel.

Secure Boot does not prevent you from using a self-compiled kernel. You must sign it with your own certificate and make that certificate known to the firmware or MOK.

  1. Create a custom X.509 key and certificate used for signing:

    openssl req -new -x509 -newkey rsa:2048 -keyout key.asc \
      -out cert.pem -nodes -days 666 -subj "/CN=$USER/"

    For more information about creating certificates, see https://en.opensuse.org/openSUSE:UEFI_Image_File_Sign_Tools#Create_Your_Own_Certificate.

  2. Package the key and the certificate as a PKCS#12 structure:

    > openssl pkcs12 -export -inkey key.asc -in cert.pem \
      -name kernel_cert -out cert.p12
  3. Generate an NSS database for use with pesign:

    > certutil -d . -N
  4. Import the key and the certificate contained in PKCS#12 into the NSS database:

    > pk12util -d . -i cert.p12
  5. Bless the kernel with the new signature using pesign:

    > pesign -n . -c kernel_cert -i arch/x86/boot/bzImage \
      -o vmlinuz.signed -s
  6. List the signatures on the kernel image:

    > pesign -n . -S -i vmlinuz.signed

    At that point, you can install the kernel in /boot as usual. Because the kernel now has a custom signature the certificate used for signing needs to be imported into the UEFI firmware or MOK.

  7. Convert the certificate to the DER format for import into the firmware or MOK:

    > openssl x509 -in cert.pem -outform der -out cert.der
  8. Copy the certificate to the ESP for easier access:

    > sudo cp cert.der /boot/efi/
  9. Use mokutil to launch the MOK list automatically.

      1. Import the certificate to MOK:

        > mokutil --root-pw --import cert.der

        The --root-pw option enables usage of the root user directly.

      2. Check the list of certificates that are prepared to be enrolled:

        > mokutil --list-new
      3. Reboot the system; shim should launch MokManager. You need to enter the root password to confirm the import of the certificate to the MOK list.

      4. Check if the newly imported key was enrolled:

        > mokutil --list-enrolled
      1. Alternatively, this is the procedure to launch MOK manually:

        Reboot

      2. In the GRUB 2 menu press the 'c' key.

      3. Type:

        chainloader $efibootdir/MokManager.efi
        boot
      4. Select Enroll key from disk.

      5. Navigate to the cert.der file and press Enter.

      6. Follow the instructions to enroll the key. Normally this should be pressing '0' and then 'y' to confirm.

        Alternatively, the firmware menu may provide ways to add a new key to the Signature Database.

14.1.4 Using non-inbox drivers Edit source

There is no support for adding non-inbox drivers (that is, drivers that do not come with openSUSE Leap) during installation with Secure Boot enabled. The signing key used for SolidDriver/PLDP is not trusted by default.

It is possible to install third party drivers during installation with Secure Boot enabled in two different ways. In both cases:

  • Add the needed keys to the firmware database via firmware/system management tools before the installation. This option depends on the specific hardware you are using. Consult your hardware vendor for more information.

  • Use a bootable driver ISO from https://drivers.suse.com/ or your hardware vendor to enroll the needed keys in the MOK list at first boot.

To use the bootable driver ISO to enroll the driver keys to the MOK list, follow these steps:

  1. Burn the ISO image above to an empty CD/DVD medium.

  2. Start the installation using the new CD/DVD medium, having the standard installation media at hand or a URL to a network installation server.

    If doing a network installation, enter the URL of the network installation source on the boot command line using the install= option.

    If doing installation from optical media, the installer will first boot from the driver kit and then ask to insert the first installation disk of the product.

  3. An initrd containing updated drivers will be used for installation.

For more information, see https://drivers.suse.com/doc/Usage/Secure_Boot_Certificate.html.

14.1.5 Features and limitations Edit source

When booting in Secure Boot mode, the following features apply:

  • Installation to UEFI default boot loader location, a mechanism to keep or restore the EFI boot entry.

  • Reboot via UEFI.

  • Xen hypervisor will boot with UEFI when there is no legacy BIOS to fall back to.

  • UEFI IPv6 PXE boot support.

  • UEFI video mode support, the kernel can retrieve video mode from UEFI to configure KMS mode with the same parameters.

  • UEFI booting from USB devices is supported.

  • Since openSUSE Leap 15.3, Kexec and Kdump are supported in Secure Boot mode.

When booting in Secure Boot mode, the following limitations apply:

  • To ensure that Secure Boot cannot be easily circumvented, certain kernel features are disabled when running under Secure Boot.

  • Boot loader, kernel, and kernel modules must be signed.

  • Hibernation (suspend on disk) is disabled.

  • Access to /dev/kmem and /dev/mem is not possible, not even as root user.

  • Access to the I/O port is not possible, not even as root user. All X11 graphical drivers must use a kernel driver.

  • PCI BAR access through sysfs is not possible.

  • custom_method in ACPI is not available.

  • debugfs for asus-wmi module is not available.

  • the acpi_rsdp parameter does not have any effect on the kernel.

14.2 More information Edit source

15 Special system features Edit source

Abstract

This chapter starts with information about various software packages, the virtual consoles and the keyboard layout. We talk about software components like bash, cron and logrotate, because they were changed or enhanced during the last release cycles. Even if they are small or considered of minor importance, users should change their default behavior, because these components are often closely coupled with the system. The chapter concludes with a section about language and country-specific settings (I18N and L10N).

15.1 Information about special software packages Edit source

The following chapter provides basic information about the following tools: bash, cron, logrotate, locate, ulimit and free.

15.1.1 The bash package and /etc/profile Edit source

Bash is the default system shell. When used as a login shell, it reads several initialization files. Bash processes them in the order they appear in this list:

  1. /etc/profile

  2. ~/.profile

  3. /etc/bash.bashrc

  4. ~/.bashrc

Make custom settings in ~/.profile or ~/.bashrc. To ensure the correct processing of these files, it is necessary to copy the basic settings from /etc/skel/.profile or /etc/skel/.bashrc into the home directory of the user. It is recommended to copy the settings from /etc/skel after an update. Execute the following shell commands to prevent the loss of personal adjustments:

> mv ~/.bashrc ~/.bashrc.old
> cp /etc/skel/.bashrc ~/.bashrc
> mv ~/.profile ~/.profile.old
> cp /etc/skel/.profile ~/.profile

Then copy personal adjustments back from the *.old files.

15.1.2 The cron package Edit source

Use cron to automatically run commands in the background at predefined times. cron uses specially formatted time tables, and the tool comes with several default ones. Users can also specify custom tables, if needed.

The cron tables are located in /var/spool/cron/tabs. /etc/crontab serves as a systemwide cron table. Enter the user name to run the command directly after the time table and before the command. In Example 15.1, “Entry in /etc/crontab”, root is entered. Package-specific tables, located in /etc/cron.d, have the same format. See the cron man page (man cron).

Example 15.1: Entry in /etc/crontab
1-59/5 * * * *   root   test -x /usr/sbin/atrun && /usr/sbin/atrun

You cannot edit /etc/crontab by calling the command crontab -e. This file must be loaded directly into an editor, then modified and saved.

Several packages install shell scripts to the directories /etc/cron.hourly, /etc/cron.daily, /etc/cron.weekly and /etc/cron.monthly, whose execution is controlled by /usr/lib/cron/run-crons. /usr/lib/cron/run-crons is run every 15 minutes from the main table (/etc/crontab). This guarantees that processes that may have been neglected can be run at the proper time.

To run the hourly, daily or other periodic maintenance scripts at custom times, remove the time stamp files regularly using /etc/crontab entries (see Example 15.2, “/etc/crontab: remove time stamp files”, which removes the hourly one before every full hour, the daily one once a day at 2:14 a.m., etc.).

Example 15.2: /etc/crontab: remove time stamp files
59 *  * * *     root  rm -f /var/spool/cron/lastrun/cron.hourly
14 2  * * *     root  rm -f /var/spool/cron/lastrun/cron.daily
29 2  * * 6     root  rm -f /var/spool/cron/lastrun/cron.weekly
44 2  1 * *     root  rm -f /var/spool/cron/lastrun/cron.monthly

Or you can set DAILY_TIME in /etc/sysconfig/cron to the time at which cron.daily should start. The setting of MAX_NOT_RUN ensures that the daily tasks get triggered to run, even if the user did not turn on the computer at the specified DAILY_TIME for a longer time. The maximum value of MAX_NOT_RUN is 14 days.

The daily system maintenance jobs are distributed to various scripts for reasons of clarity. They are contained in the package aaa_base. /etc/cron.daily contains, for example, the components suse.de-backup-rpmdb, suse.de-clean-tmp or suse.de-cron-local.

15.1.3 Stopping cron status messages Edit source

To avoid the mail flood caused by cron status messages, the default value of SEND_MAIL_ON_NO_ERROR in /etc/sysconfig/cron is set to "no" for new installations. Even with this setting to "no", cron data output will still be sent to the MAILTO address, as documented in the cron man page.

In the update case it is recommended to set these values according to your needs.

15.1.4 Log files: package logrotate Edit source

There are several system services (daemons) that, along with the kernel itself, regularly record the system status and specific events onto log files. This way, the administrator can regularly check the status of the system at a certain point in time, recognize errors or faulty functions and troubleshoot them with pinpoint precision. These log files are normally stored in /var/log as specified by FHS and grow on a daily basis. The logrotate package helps control the growth of these files. For more details refer to Book “System Analysis and Tuning Guide”, Chapter 3 “System log files”, Section 3.3 “Managing log files with logrotate.

15.1.5 The locate command Edit source

locate, a command for quickly finding files, is not included in the standard scope of installed software. If desired, install the package mlocate, the successor of the package findutils-locate. The updatedb process is started automatically every night or about 15 minutes after booting the system.

15.1.6 The ulimit command Edit source

With the ulimit (user limits) command, it is possible to set limits for the use of system resources and to have these displayed. ulimit is especially useful for limiting available memory for applications. With this, an application can be prevented from co-opting too much of the system resources and slowing or even hanging up the operating system.

ulimit can be used with various options. To limit memory usage, use the options listed in Table 15.1, “ulimit: Setting resources for the user”.

Table 15.1: ulimit: Setting resources for the user

-m

The maximum resident set size

-v

The maximum amount of virtual memory available to the shell

-s

The maximum size of the stack

-c

The maximum size of core files created

-a

All current limits are reported

Systemwide default entries are set in /etc/profile. Editing this file directly is not recommended, because changes will be overwritten during system upgrades. To customize systemwide profile settings, use /etc/profile.local. Per-user settings should be made in ~USER/.profile.

Example 15.3: ulimit: Settings in ~/.bashrc
# Limits maximum resident set size (physical memory):
ulimit -m 98304

# Limits of virtual memory:
ulimit -v 98304

Memory allocations must be specified in KB. For more detailed information, see man bash.

Important
Important: ulimit support

Not all shells support ulimit directives. PAM (for example, pam_limits) offers comprehensive adjustment possibilities as an alternative to ulimit.

15.1.7 The free command Edit source

The free command displays the total amount of free and used physical memory and swap space in the system and the buffers and cache consumed by the kernel. The concept of available RAM dates back to before the days of unified memory management. The slogan free memory is bad memory applies well to Linux. As a result, Linux has always made the effort to balance out caches without allowing free or unused memory.

The kernel does not have direct knowledge of any applications or user data. Instead, it manages applications and user data in a page cache. If memory runs short, parts of it are written to the swap partition or to files, from which they can initially be read using the mmap command (see man mmap).

The kernel also contains other caches, such as the slab cache, where the caches used for network access are stored. This may explain the differences between the counters in /proc/meminfo. Most, but not all, of them can be accessed via /proc/slabinfo.

However, if your goal is to find out how much RAM is currently being used, find this information in /proc/meminfo.

15.1.8 Man pages and info pages Edit source

For some GNU applications (such as tar), the man pages are no longer maintained. For these commands, use the --help option to get a quick overview of the info pages, which provide more in-depth instructions. Info is GNU's hypertext system. Read an introduction to this system by entering info info. Info pages can be viewed with Emacs by entering emacs -f info or directly in a console with info. You can also use tkinfo, xinfo or the help system to view info pages.

15.1.9 Selecting man pages using the man command Edit source

To read a man page enter man MAN_PAGE. If a man page with the same name exists in different sections, they will all be listed with the corresponding section numbers. Select the one to display. If you do not enter a section number within a few seconds, the first man page will be displayed.

To change this to the default system behavior, set MAN_POSIXLY_CORRECT=1 in a shell initialization file such as ~/.bashrc.

15.1.10 Settings for GNU Emacs Edit source

GNU Emacs is a complex work environment. The following sections cover the configuration files processed when GNU Emacs is started. More information is available at http://www.gnu.org/software/emacs/.

On start-up, Emacs reads several files containing the settings of the user, system administrator and distributor for customization or preconfiguration. The initialization file ~/.emacs is installed to the home directories of the individual users from /etc/skel. .emacs, in turn, reads the file /etc/skel/.gnu-emacs. To customize the program, copy .gnu-emacs to the home directory (with cp /etc/skel/.gnu-emacs ~/.gnu-emacs) and make the desired settings there.

.gnu-emacs defines the file ~/.gnu-emacs-custom as custom-file. If users make settings with the customize options in Emacs, the settings are saved to ~/.gnu-emacs-custom.

With openSUSE Leap, the emacs package installs the file site-start.el in the directory /usr/share/emacs/site-lisp. The file site-start.el is loaded before the initialization file ~/.emacs. Among other things, site-start.el ensures that special configuration files distributed with Emacs add-on packages, such as psgml, are loaded automatically. Configuration files of this type are located in /usr/share/emacs/site-lisp, too, and always begin with suse-start-. The local system administrator can specify systemwide settings in default.el.

More information about these files is available in the Emacs info file under Init File: info:/emacs/InitFile. Information about how to disable the loading of these files (if necessary) is also provided at this location.

The components of Emacs are divided into several packages:

  • The base package emacs.

  • emacs-x11 (usually installed): the program with X11 support.

  • emacs-nox: the program without X11 support.

  • emacs-info: online documentation in info format.

  • emacs-el: the uncompiled library files in Emacs Lisp. These are not required at runtime.

  • Numerous add-on packages can be installed if needed: emacs-auctex (LaTeX), psgml (SGML and XML), gnuserv (client and server operation) and others.

15.2 Virtual consoles Edit source

Linux is a multiuser and multitasking system. The advantages of these features can be appreciated even on a stand-alone PC system. In text mode, there are six virtual consoles available. Switch between them using AltF1 through AltF6. The seventh console is reserved for X and the tenth console shows kernel messages.

To switch to a console from X without shutting it down, use CtrlAltF1 to CtrlAltF6. To return to X, press AltF7.

15.3 Keyboard mapping Edit source

To standardize the keyboard mapping of programs, changes were made to the following files:

/etc/inputrc
/etc/X11/Xmodmap
/etc/skel/.emacs
/etc/skel/.gnu-emacs
/etc/skel/.vimrc
/etc/csh.cshrc
/etc/termcap
/usr/share/terminfo/x/xterm
/usr/share/X11/app-defaults/XTerm
/usr/share/emacs/VERSION/site-lisp/term/*.el

These changes only affect applications that use terminfo entries or whose configuration files are changed directly (vi, emacs, etc.). Applications not shipped with the system should be adapted to these defaults.

Under X, the compose key (multikey) can be enabled as explained in /etc/X11/Xmodmap.

Further settings are possible using the X Keyboard Extension (XKB).

Tip
Tip: More information

Information about XKB is available in the documents listed in /usr/share/doc/packages/xkeyboard-config (part of the xkeyboard-config package).

15.4 Language and country-specific settings Edit source

The system is, to a very large extent, internationalized and can be modified for local needs. Internationalization (I18N) allows specific localization (L10N). The abbreviations I18N and L10N are derived from the first and last letters of the words and, in between, the number of letters omitted.

Settings are made with LC_ variables defined in the file /etc/sysconfig/language. This refers not only to native language support, but also to the categories Messages (Language), Character Set, Sort Order, Time and Date, Numbers and Money. Each of these categories can be defined directly with its own variable or indirectly with a master variable in the file language (see the locale man page).

List of variables
RC_LC_MESSAGES, RC_LC_CTYPE, RC_LC_COLLATE, RC_LC_TIME, RC_LC_NUMERIC, RC_LC_MONETARY

These variables are passed to the shell without the RC_ prefix and represent the listed categories. The shell profiles concerned are listed below. The current setting can be shown with the command locale.

RC_LC_ALL

This variable, if set, overwrites the values of the variables already mentioned.

RC_LANG

If none of the previous variables are set, this is the fallback. By default, only RC_LANG is set. This makes it easier for users to enter their own values.

ROOT_USES_LANG

This variable can be set to yes or ctype (default). If set to yes, root uses language and country-specific settings, otherwise the system administrator always works in a POSIX environment.

The variables can be set with the YaST sysconfig editor. The value of such a variable contains the language code, country code, encoding and modifier. The individual components are joined by special characters:

LANG=<language>[[_<COUNTRY>].<Encoding>[@<Modifier>]]

15.4.1 System-wide locale settings Edit source

systemd reads /etc/locale.conf at early boot. The locale settings configured in this file are inherited by every service or user, unless there are individual settings.

Note
Note: Behavior of older configuration files under openSUSE Leap openSUSE Leap

Earlier versions of openSUSE Leap read locale settings from /etc/sysconfig/language, /etc/sysconfig/keyboard, and /etc/sysconfig/console. Starting with openSUSE Leap 15.0, these files are considered obsolete. systemd does not read settings from these files anymore. Instead, systemd reads /etc/locale.conf.

However, variables defined in /etc/sysconfig/language will still be used: They override the system-wide locale and can be used to define different locale settings for user shells (see Section 15.4.2, “Some examples”).

To set the system-wide locale, you can either:

  • Write your settings in /etc/locale.conf. Each line is a environment-like variable assignment (see man 5 locale.conf for a list of variables):

    LANG=de_DE.UTF-8

    To fine-tune the settings, you can add additional variables, one variable per line.

  • Use the command localectl:

    # localectl set-locale LANG=de_DE.UTF-8

    Same here, you can also specify additional variables after the localectl set-locale command.

To keep backward compatibility with old systems during the update of the systemd package, all variables mentioned will be migrated from sysconfig to their final destinations if they are not already defined there.

15.4.2 Some examples Edit source

You should always set the language and country codes together. Language settings follow the standard ISO 639 available at http://www.evertype.com/standards/iso639/iso639-en.html and http://www.loc.gov/standards/iso639-2/. Country codes are listed in ISO 3166, see http://en.wikipedia.org/wiki/ISO_3166.

It only makes sense to set values for which usable description files can be found in /usr/lib/locale. Additional description files can be created from the files in /usr/share/i18n using the command localedef. The description files are part of the glibc-i18ndata package. A description file for en_US.UTF-8 (for English and United States) can be created with:

localedef -i en_US -f UTF-8 en_US.UTF-8
LANG=en_US.UTF-8

This is the default setting if American English is selected during installation. If you selected another language, that language is enabled but still with UTF-8 as the character encoding.

LANG=en_US.ISO-8859-1

This sets the language to English, country to United States and the character set to ISO-8859-1. This character set does not support the Euro sign, but it can be useful sometimes for programs that have not been updated to support UTF-8. The string defining the charset (ISO-8859-1 in this case) is then evaluated by programs like Emacs.

LANG=en_IE@euro

The above example explicitly includes the Euro sign in a language setting. This setting is obsolete now, as UTF-8 also covers the Euro symbol. It is only useful if an application supports ISO-8859-15 and not UTF-8.

Changes to /etc/sysconfig/language are activated by the following process chain:

  • For the Bash: /etc/profile reads /etc/profile.d/lang.sh which, in turn, analyzes /etc/sysconfig/language.

  • For tcsh: At login, /etc/csh.login reads /etc/profile.d/lang.csh which, in turn, analyzes /etc/sysconfig/language.

This ensures that any changes to /etc/sysconfig/language are available at the next login to the respective shell, without having to manually activate them.

Users can override the system defaults by editing their ~/.bashrc accordingly. For example, if you do not want to use the system-wide en_US for program messages, include LC_MESSAGES=es_ES so that messages are displayed in Spanish instead.

15.4.3 Locale settings in ~/.i18n Edit source

If you are not satisfied with locale system defaults, change the settings in ~/.i18n according to the Bash scripting syntax. Entries in ~/.i18n override system defaults from /etc/sysconfig/language. Use the same variable names but without the RC_ namespace prefixes. For example, use LANG instead of RC_LANG:

LANG=cs_CZ.UTF-8
LC_COLLATE=C

15.4.4 Settings for language support Edit source

Files in the category Messages are, as a rule, only stored in the corresponding language directory (like en) to have a fallback. If you set LANG to en_US and the message file in /usr/share/locale/en_US/LC_MESSAGES does not exist, it falls back to /usr/share/locale/en/LC_MESSAGES.

A fallback chain can also be defined, for example, for Breton to French or for Galician to Spanish to Portuguese:

LANGUAGE="br_FR:fr_FR"

LANGUAGE="gl_ES:es_ES:pt_PT"

If desired, use the Norwegian variants Nynorsk and Bokmål instead (with additional fallback to no):

LANG="nn_NO"

LANGUAGE="nn_NO:nb_NO:no"

or

LANG="nb_NO"

LANGUAGE="nb_NO:nn_NO:no"

In Norwegian, LC_TIME is also treated differently.

One problem that can arise is a separator used to delimit groups of digits not being recognized properly. This occurs if LANG is set to only a two-letter language code like de, but the definition file glibc uses is located in /usr/share/lib/de_DE/LC_NUMERIC. Thus LC_NUMERIC must be set to de_DE to make the separator definition visible to the system.

15.4.5 More information Edit source

  • The GNU C Library Reference Manual, Chapter Locales and Internationalization. It is included in the package glibc-info.

  • Markus Kuhn, UTF-8 and Unicode FAQ for Unix/Linux, currently at https://www.cl.cam.ac.uk/~mgk25/unicode.html.

16 Dynamic kernel device management with udev Edit source

The kernel can add or remove almost any device in a running system. Changes in the device state (whether a device is plugged in or removed) need to be propagated to user space. Devices need to be configured when they are plugged in and recognized. Users of a certain device need to be informed about any changes in this device's recognized state. udev provides the needed infrastructure to dynamically maintain the device node files and symbolic links in the /dev directory. udev rules provide a way to plug external tools into the kernel device event processing. This allows you to customize udev device handling by adding certain scripts to execute as part of kernel device handling, or request and import additional data to evaluate during device handling.

16.1 The /dev directory Edit source

The device nodes in the /dev directory provide access to the corresponding kernel devices. With udev, the /dev directory reflects the current state of the kernel. Every kernel device has one corresponding device file. If a device is disconnected from the system, the device node is removed.

The content of the /dev directory is kept on a temporary file system and all files are rendered at every system start-up. Manually created or modified files do not, by design, survive a reboot. Static files and directories that should always be in the /dev directory regardless of the state of the corresponding kernel device can be created with systemd-tmpfiles. The configuration files are found in /usr/lib/tmpfiles.d/ and /etc/tmpfiles.d/; for more information, see the systemd-tmpfiles(8) man page.

16.2 Kernel uevents and udev Edit source

The required device information is exported by the sysfs file system. For every device the kernel has detected and initialized, a directory with the device name is created. It contains attribute files with device-specific properties.

Every time a device is added or removed, the kernel sends a uevent to notify udev of the change. The udev daemon reads and parses all rules from the /usr/lib/udev/rules.d/*.rules and /etc/udev/rules.d/*.rules files at start-up and keeps them in memory. If rules files are changed, added or removed, the daemon can reload their in-memory representation with the command udevadm control --reload. For more details on udev rules and their syntax, refer to Section 16.6, “Influencing kernel device event handling with udev rules”.

Every received event is matched against the set of provides rules. The rules can add or change event environment keys, request a specific name for the device node to create, add symbolic links pointing to the node or add programs to run after the device node is created. The driver core uevents are received from a kernel netlink socket.

16.3 Drivers, kernel modules and devices Edit source

The kernel bus drivers probe for devices. For every detected device, the kernel creates an internal device structure while the driver core sends a uevent to the udev daemon. Bus devices identify themselves by a specially formatted ID, which tells what kind of device it is. These IDs consist of vendor and product ID and other subsystem-specific values. Every bus has its own scheme for these IDs, called MODALIAS. The kernel takes the device information, composes a MODALIAS ID string from it and sends that string along with the event. For a USB mouse, it looks like this:

MODALIAS=usb:v046DpC03Ed2000dc00dsc00dp00ic03isc01ip02

Every device driver carries a list of known aliases for devices it can handle. The list is contained in the kernel module file itself. The program depmod reads the ID lists and creates the file modules.alias in the kernel's /lib/modules directory for all currently available modules. With this infrastructure, module loading is as easy as calling modprobe for every event that carries a MODALIAS key. If modprobe $MODALIAS is called, it matches the device alias composed for the device with the aliases provided by the modules. If a matching entry is found, that module is loaded. All this is automatically triggered by udev.

16.4 Booting and initial device setup Edit source

All device events happening during the boot process before the udev daemon is running are lost, because the infrastructure to handle these events resides on the root file system and is not available at that time. To cover that loss, the kernel provides a uevent file located in the device directory of every device in the sysfs file system. By writing add to that file, the kernel resends the same event as the one lost during boot. A simple loop over all uevent files in /sys triggers all events again to create the device nodes and perform device setup.

As an example, a USB mouse present during boot may not be initialized by the early boot logic, because the driver is not available at that time. The event for the device discovery was lost and failed to find a kernel module for the device. Instead of manually searching for connected devices, udev requests all device events from the kernel after the root file system is available, so the event for the USB mouse device runs again. Now it finds the kernel module on the mounted root file system and the USB mouse can be initialized.

From user space, there is no visible difference between a device coldplug sequence and a device discovery during runtime. In both cases, the same rules are used to match and the same configured programs are run.

16.5 Monitoring the running udev daemon Edit source

The program udevadm monitor can be used to visualize the driver core events and the timing of the udev event processes.

UEVENT[1185238505.276660] add   /devices/pci0000:00/0000:00:1d.2/usb3/3-1 (usb)
UDEV  [1185238505.279198] add   /devices/pci0000:00/0000:00:1d.2/usb3/3-1 (usb)
UEVENT[1185238505.279527] add   /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0 (usb)
UDEV  [1185238505.285573] add   /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0 (usb)
UEVENT[1185238505.298878] add   /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input10 (input)
UDEV  [1185238505.305026] add   /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input10 (input)
UEVENT[1185238505.305442] add   /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input10/mouse2 (input)
UEVENT[1185238505.306440] add   /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input10/event4 (input)
UDEV  [1185238505.325384] add   /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input10/event4 (input)
UDEV  [1185238505.342257] add   /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input10/mouse2 (input)

The UEVENT lines show the events the kernel has sent over netlink. The UDEV lines show the finished udev event handlers. The timing is printed in microseconds. The time between UEVENT and UDEV is the time udev took to process this event or the udev daemon has delayed its execution to synchronize this event with related and already running events. For example, events for hard disk partitions always wait for the main disk device event to finish, because the partition events may rely on the data that the main disk event has queried from the hardware.

udevadm monitor --env shows the complete event environment:

ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input10
SUBSYSTEM=input
SEQNUM=1181
NAME="Logitech USB-PS/2 Optical Mouse"
PHYS="usb-0000:00:1d.2-1/input0"
UNIQ=""
EV=7
KEY=70000 0 0 0 0
REL=103
MODALIAS=input:b0003v046DpC03Ee0110-e0,1,2,k110,111,112,r0,1,8,amlsfw

udev also sends messages to syslog. The default syslog priority that controls which messages are sent to syslog is specified in the udev configuration file /etc/udev/udev.conf. The log priority of the running daemon can be changed with udevadm control --log_priority=LEVEL/NUMBER.

16.6 Influencing kernel device event handling with udev rules Edit source

A udev rule can match any property the kernel adds to the event itself or any information that the kernel exports to sysfs. The rule can also request additional information from external programs. Events are matched against all rules provided in the directories /usr/lib/udev/rules.d/ (for default rules) and /etc/udev/rules.d (system-specific configuration).

Every line in the rules file contains at least one key value pair. There are two kinds of keys, match and assignment keys. If all match keys match their values, the rule is applied and the assignment keys are assigned the specified value. A matching rule may specify the name of the device node, add symbolic links pointing to the node or run a specified program as part of the event handling. If no matching rule is found, the default device node name is used to create the device node. Detailed information about the rule syntax and the provided keys to match or import data are described in the udev man page. The following example rules provide a basic introduction to udev rule syntax. The example rules are all taken from the udev default rule set /usr/lib/udev/rules.d/50-udev-default.rules.

Example 16.1: Example udev rules
# console
KERNEL=="console", MODE="0600", OPTIONS="last_rule"

# serial devices
KERNEL=="ttyUSB*", ATTRS{product}=="[Pp]alm*Handheld*", SYMLINK+="pilot"

# printer
SUBSYSTEM=="usb", KERNEL=="lp*", NAME="usb/%k", SYMLINK+="usb%k", GROUP="lp"

# kernel firmware loader
SUBSYSTEM=="firmware", ACTION=="add", RUN+="firmware.sh"

The console rule consists of three keys: one match key (KERNEL) and two assign keys (MODE, OPTIONS). The KERNEL match rule searches the device list for any items of the type console. Only exact matches are valid and trigger this rule to be executed. The MODE key assigns special permissions to the device node, in this case, read and write permissions to the owner of this device only. The OPTIONS key makes this rule the last rule to be applied to any device of this type. Any later rule matching this particular device type does not have any effect.

The serial devices rule is not available in 50-udev-default.rules anymore, but it is still worth considering. It consists of two match keys (KERNEL and ATTRS) and one assign key (SYMLINK). The KERNEL key searches for all devices of the ttyUSB type. Using the * wild card, this key matches several of these devices. The second match key, ATTRS, checks whether the product attribute file in sysfs for any ttyUSB device contains a certain string. The assign key (SYMLINK) triggers the addition of a symbolic link to this device under /dev/pilot. The operator used in this key (+=) tells udev to additionally perform this action, even if previous or later rules add other symbolic links. As this rule contains two match keys, it is only applied if both conditions are met.

The printer rule deals with USB printers and contains two match keys which must both apply to get the entire rule applied (SUBSYSTEM and KERNEL). Three assign keys deal with the naming for this device type (NAME), the creation of symbolic device links (SYMLINK) and the group membership for this device type (GROUP). Using the * wild card in the KERNEL key makes it match several lp printer devices. Substitutions are used in both, the NAME and the SYMLINK keys to extend these strings by the internal device name. For example, the symbolic link to the first lp USB printer would read /dev/usblp0.

The kernel firmware loader rule makes udev load additional firmware by an external helper script during runtime. The SUBSYSTEM match key searches for the firmware subsystem. The ACTION key checks whether any device belonging to the firmware subsystem has been added. The RUN+= key triggers the execution of the firmware.sh script to locate the firmware that is to be loaded.

Some general characteristics are common to all rules:

  • Each rule consists of one or more key value pairs separated by a comma.

  • A key's operation is determined by the operator. udev rules support several operators.

  • Each given value must be enclosed by quotation marks.

  • Each line of the rules file represents one rule. If a rule is longer than one line, use \ to join the different lines as you would do in shell syntax.

  • udev rules support a shell-style pattern that matches the *, ?, and [] patterns.

  • udev rules support substitutions.

16.6.1 Using operators in udev rules Edit source

Creating keys you can choose from several operators, depending on the type of key you want to create. Match keys will normally be used to find a value that either matches or explicitly mismatches the search value. Match keys contain either of the following operators:

==

Compare for equality. If the key contains a search pattern, all results matching this pattern are valid.

!=

Compare for non-equality. If the key contains a search pattern, all results matching this pattern are valid.

Any of the following operators can be used with assign keys:

=

Assign a value to a key. If the key previously consisted of a list of values, the key resets and only the single value is assigned.

+=

Add a value to a key that contains a list of entries.

:=

Assign a final value. Disallow any later change by later rules.

16.6.2 Using substitutions in udev rules Edit source

udev rules support the use of placeholders and substitutions. Use them in a similar fashion as you would do in any other scripts. The following substitutions can be used with udev rules:

%r, $root

The device directory, /dev by default.

%p, $devpath

The value of DEVPATH.

%k, $kernel

The value of KERNEL or the internal device name.

%n, $number

The device number.

%N, $tempnode

The temporary name of the device file.

%M, $major

The major number of the device.

%m, $minor

The minor number of the device.

%s{ATTRIBUTE}, $attr{ATTRIBUTE}

The value of a sysfs attribute (specified by ATTRIBUTE).

%E{VARIABLE}, $env{VARIABLE}

The value of an environment variable (specified by VARIABLE).

%c, $result

The output of PROGRAM.

%%

The % character.

$$

The $ character.

16.6.3 Using udev match keys Edit source

Match keys describe conditions that must be met before a udev rule can be applied. The following match keys are available:

ACTION

The name of the event action, for example, add or remove when adding or removing a device.

DEVPATH

The device path of the event device, for example, DEVPATH=/bus/pci/drivers/ipw3945 to search for all events related to the ipw3945 driver.

KERNEL

The internal (kernel) name of the event device.

SUBSYSTEM

The subsystem of the event device, for example, SUBSYSTEM=usb for all events related to USB devices.

ATTR{FILENAME}

sysfs attributes of the event device. To match a string contained in the vendor attribute file name, you could use ATTR{vendor}=="On[sS]tream", for example.

KERNELS

Let udev search the device path upward for a matching device name.

SUBSYSTEMS

Let udev search the device path upward for a matching device subsystem name.

DRIVERS

Let udev search the device path upward for a matching device driver name.

ATTRS{FILENAME}

Let udev search the device path upward for a device with matching sysfs attribute values.

ENV{KEY}

The value of an environment variable, for example, ENV{ID_BUS}="ieee1394 to search for all events related to the FireWire bus ID.

PROGRAM

Let udev execute an external program. To be successful, the program must return with exit code zero. The program's output, printed to STDOUT, is available to the RESULT key.

RESULT

Match the output string of the last PROGRAM call. Either include this key in the same rule as the PROGRAM key or in a later one.

16.6.4 Using udev assign keys Edit source

In contrast to the match keys described above, assign keys do not describe conditions that must be met. They assign values, names and actions to the device nodes maintained by udev.

NAME

The name of the device node to be created. After a rule has set a node name, all other rules with a NAME key for this node are ignored.

SYMLINK

The name of a symbolic link related to the node to be created. Multiple matching rules can add symbolic links to be created with the device node. You can also specify multiple symbolic links for one node in one rule using the space character to separate the symbolic link names.

OWNER, GROUP, MODE

The permissions for the new device node. Values specified here overwrite anything that has been compiled in.

ATTR{KEY}

Specify a value to be written to a sysfs attribute of the event device. If the == operator is used, this key is also used to match against the value of a sysfs attribute.

ENV{KEY}

Tell udev to export a variable to the environment. If the == operator is used, this key is also used to match against an environment variable.

RUN

Tell udev to add a program to the list of programs to be executed for this device. Keep in mind to restrict this to short tasks to avoid blocking further events for this device.

LABEL

Add a label where a GOTO can jump to.

GOTO

Tell udev to skip several rules and continue with the one that carries the label referenced by the GOTO key.

IMPORT{TYPE}

Load variables into the event environment such as the output of an external program. udev imports variables of several types. If no type is specified, udev tries to determine the type itself based on the executable bit of the file permissions.

  • program tells udev to execute an external program and import its output.

  • file tells udev to import a text file.

  • parent tells udev to import the stored keys from the parent device.

WAIT_FOR_SYSFS

Tells udev to wait for the specified sysfs file to be created for a certain device. For example, WAIT_FOR_SYSFS="ioerr_cnt" informs udev to wait until the ioerr_cnt file has been created.

OPTIONS

The OPTION key may have several values:

  • last_rule tells udev to ignore all later rules.

  • ignore_device tells udev to ignore this event.

  • ignore_remove tells udev to ignore all later remove events for the device.

  • all_partitions tells udev to create device nodes for all available partitions on a block device.

16.7 Persistent device naming Edit source

The dynamic device directory and the udev rules infrastructure make it possible to provide stable names for all disk devices—regardless of their order of recognition or the connection used for the device. Every appropriate block device the kernel creates is examined by tools with special knowledge about certain buses, drive types or file systems. Along with the dynamic kernel-provided device node name, udev maintains classes of persistent symbolic links pointing to the device:

/dev/disk
|-- by-id
|   |-- scsi-SATA_HTS726060M9AT00_MRH453M4HWHG7B -> ../../sda
|   |-- scsi-SATA_HTS726060M9AT00_MRH453M4HWHG7B-part1 -> ../../sda1
|   |-- scsi-SATA_HTS726060M9AT00_MRH453M4HWHG7B-part6 -> ../../sda6
|   |-- scsi-SATA_HTS726060M9AT00_MRH453M4HWHG7B-part7 -> ../../sda7
|   |-- usb-Generic_STORAGE_DEVICE_02773 -> ../../sdd
|   `-- usb-Generic_STORAGE_DEVICE_02773-part1 -> ../../sdd1
|-- by-label
|   |-- Photos -> ../../sdd1
|   |-- SUSE10 -> ../../sda7
|   `-- devel -> ../../sda6
|-- by-path
|   |-- pci-0000:00:1f.2-scsi-0:0:0:0 -> ../../sda
|   |-- pci-0000:00:1f.2-scsi-0:0:0:0-part1 -> ../../sda1
|   |-- pci-0000:00:1f.2-scsi-0:0:0:0-part6 -> ../../sda6
|   |-- pci-0000:00:1f.2-scsi-0:0:0:0-part7 -> ../../sda7
|   |-- pci-0000:00:1f.2-scsi-1:0:0:0 -> ../../sr0
|   |-- usb-02773:0:0:2 -> ../../sdd
|   |-- usb-02773:0:0:2-part1 -> ../../sdd1
`-- by-uuid
    |-- 159a47a4-e6e6-40be-a757-a629991479ae -> ../../sda7
    |-- 3e999973-00c9-4917-9442-b7633bd95b9e -> ../../sda6
    `-- 4210-8F8C -> ../../sdd1

16.8 Files used by udev Edit source

/sys/*

Virtual file system provided by the Linux kernel, exporting all currently known devices. This information is used by udev to create device nodes in /dev

/dev/*

Dynamically created device nodes and static content created with systemd-tmpfiles; for more information, see the systemd-tmpfiles(8) man page.

The following files and directories contain the crucial elements of the udev infrastructure:

/etc/udev/udev.conf

Main udev configuration file.

/etc/udev/rules.d/*

System-specific udev event matching rules. You can add custom rules here to modify or override the default rules from /usr/lib/udev/rules.d/*.

Files are parsed in alphanumeric order. Rules from files with a higher priority modify or override rules with lower priority. The lower the number, the higher the priority.

/usr/lib/udev/rules.d/*

Default udev event matching rules. The files in this directory are owned by packages and will be overwritten by updates. Do not add, remove or edit files here, use /etc/udev/rules.d instead.

/usr/lib/udev/*

Helper programs called from udev rules.

/usr/lib/tmpfiles.d/ and /etc/tmpfiles.d/

Responsible for static /dev content.

16.9 More information Edit source

For more information about the udev infrastructure, refer to the following man pages:

udev

General information about udev, keys, rules and other important configuration issues.

udevadm

udevadm can be used to control the runtime behavior of udev, request kernel events, manage the event queue and provide simple debugging mechanisms.

udevd

Information about the udev event managing daemon.

Part III Services Edit source

17 SLP

Configuring a network client requires detailed knowledge about services provided over the network (such as printing or LDAP, for example). To make it easier to configure such services on a network client, the service location protocol (SLP) was developed. SLP makes the availability and configuration data of selected services known to all clients in the local network. Applications that support SLP can use this information to be configured automatically.

18 Time synchronization with NTP

The NTP (network time protocol) mechanism is a protocol for synchronizing the system time over the network. First, a machine can obtain the time from a server that is a reliable time source. Second, a machine can itself act as a time source for other computers in the network. The goal is twofold—maintaining the absolute time and synchronizing the system time of all machines within a network.

19 The domain name system

DNS (domain name system) is needed to resolve the domain names and host names into IP addresses. In this way, the IP address 192.168.2.100 is assigned to the host name jupiter, for example. Before setting up your own name server, read the general information about DNS in Section 13.3, “Name resolution”. The following configuration examples refer to BIND, the default DNS server.

20 DHCP

The purpose of the Dynamic Host Configuration Protocol (DHCP) is to assign network settings centrally (from a server) rather than configuring them locally on every workstation. A host configured to use DHCP does not have control over its own static address. It is enabled to configure itself automatically according to directions from the server. If you use the NetworkManager on the client side, you do not need to configure the client. This is useful if you have changing environments and only one interface active at a time. Never use NetworkManager on a machine that runs a DHCP server.

21 Samba

Using Samba, a Unix machine can be configured as a file and print server for macOS, Windows, and OS/2 machines. Samba has developed into a fully-fledged and rather complex product. Configure Samba with YaST, or by editing the configuration file manually.

22 Sharing file systems with NFS

The Network File System (NFS) is a protocol that allows access to files on a server in a manner similar to accessing local files.

openSUSE Leap installs NFS v4.2, which introduces support for sparse files, file pre-allocation, server-side clone and copy, application data block (ADB), and labeled NFS for mandatory access control (MAC) (requires MAC on both client and server).

23 On-demand mounting with autofs

autofs is a program that automatically mounts specified directories on an on-demand basis. It is based on a kernel module for high efficiency, and can manage both local directories and network shares. These automatic mount points are mounted only when they are accessed, and unmounted after a certain period of inactivity. This on-demand behavior saves bandwidth and results in better performance than static mounts managed by /etc/fstab. While autofs is a control script, automount is the command (daemon) that does the actual auto-mounting.

24 The Apache HTTP server

According to the surveys from http://www.netcraft.com/ and https://w3techs.com/, the Apache HTTP Server (Apache) is one of the world's most popular Web servers. Developed by the Apache Software Foundation (http://www.apache.org/), it is available for most operating systems. openSUSE® Leap includes Apache version 2.4. This chapter describes how to install, configure and operate Apache. It also shows how to use additional modules, such as SSL, and how to troubleshoot Apache.

25 Setting up an FTP server with YaST

Using the YaST FTP Server module, you can configure your machine to function as an FTP (File Transfer Protocol) server. Anonymous and/or authenticated users can connect to your machine and download files using the FTP protocol. Depending on the configuration, they can also upload files to the FTP server. YaST uses vsftpd (Very Secure FTP Daemon).

26 Squid caching proxy server

Squid is a widely used caching proxy server for Linux and Unix platforms. This means that it stores requested Internet objects, such as data on a Web or FTP server, on a machine that is closer to the requesting workstation than the server. It can be set up in multiple hierarchies to assure optimal response times and low bandwidth usage, even in modes that are transparent to end users.

Abstract

Configuring a network client requires detailed knowledge about services provided over the network (such as printing or LDAP, for example). To make it easier to configure such services on a network client, the service location protocol (SLP) was developed. SLP makes the availability and configuration data of selected services known to all clients in the local network. Applications that support SLP can use this information to be configured automatically.

openSUSE® Leap supports installation using installation sources provided with SLP and contains many system services with integrated support for SLP. You can use SLP to provide networked clients with central functions, such as an installation server, file server, or print server on your system. Services that offer SLP support include cupsd, login, ntp, openldap2-client, postfix, rpasswd, rsyncd, saned, sshd (via fish), vnc, and ypserv.

All packages necessary to use SLP services on a network client are installed by default. However, if you want to provide services via SLP, check that the openslp-server package is installed.

17.1 The SLP front-end slptool Edit source

slptool is a command line tool to query and register SLP services. The query functions are useful for diagnostic purposes. The most important slptool subcommands are listed below. slptool --help lists all available options and functions.

findsrvtypes

List all service types available on the network.

> slptool findsrvtypes
service:install.suse:nfs
service:install.suse:ftp
service:install.suse:http
service:install.suse:smb
service:ssh
service:fish
service:YaST.installation.suse:vnc
service:smtp
service:domain
service:management-software.IBM:hardware-management-console
service:rsync
service:ntp
service:ypserv
findsrvs SERVICE_TYPE

List all servers providing SERVICE_TYPE

> slptool findsrvs service:ntp
service:ntp://ntp.example.com:123,57810
service:ntp://ntp2.example.com:123,57810
findattrs SERVICE_TYPE//HOST

List attributes for SERVICE_TYPE on HOST

> slptool findattrs service:ntp://ntp.example.com
(owner=tux),(email=tux@example.com)
register SERVICE type//HOST:PORT "(ATTRIBUTE=VALUE),(ATTRIBUTE=VALUE)"

Registers SERVICE_TYPE on HOST with an optional list of attributes

slptool register service:ntp://ntp.example.com:57810 \
"(owner=tux),(email=tux@example.com)"
deregister SERVICE_TYPE//host

Deregisters SERVICE_TYPE on HOST

slptool deregister service:ntp://ntp.example.com

For more information run slptool --help.

17.2 Providing services via SLP Edit source

To provide SLP services, the SLP daemon (slpd) must be running. Like most system services in openSUSE Leap, slpd is controlled by a separate start script. After the installation, the daemon is inactive by default. To activate it for the current session, run sudo systemctl start slpd. If slpd should be activated on system start-up, run sudo systemctl enable slpd.

Many applications in openSUSE Leap have integrated SLP support via the libslp library. If a service has not been compiled with SLP support, use one of the following methods to make it available via SLP:

Static registration with /etc/slp.reg.d

Create a separate registration file for each new service. The following example registers a scanner service:

## Register a saned service on this system
## en means english language
## 65535 disables the timeout, so the service registration does
## not need refreshes
service:scanner.sane://$HOSTNAME:6566,en,65535
watch-port-tcp=6566
description=SANE scanner daemon

The most important line in this file is the service URL, which begins with service:. This contains the service type (scanner.sane) and the address under which the service is available on the server. $HOSTNAME is automatically replaced with the full host name. The name of the TCP port on which the relevant service can be found follows, separated by a colon. Then enter the language in which the service should appear and the duration of registration in seconds. These should be separated from the service URL by commas. Set the value for the duration of registration between 0 and 65535. 0 prevents registration. 65535 removes all restrictions.

The registration file also contains the two variables watch-port-tcp and description. watch-port-tcp links the SLP service announcement to whether the relevant service is active by having slpd check the status of the service. The second variable contains a more precise description of the service that is displayed in suitable browsers.

Tip
Tip: YaST and SLP

Some services brokered by YaST, such as an installation server or YOU server, perform this registration automatically when you activate SLP in the module dialogs. YaST then creates registration files for these services.

Static registration with /etc/slp.reg

The only difference between this method and the procedure with /etc/slp.reg.d is that all services are grouped within a central file.

Dynamic registration with slptool

If a service needs to be registered dynamically without the need of configuration files, use the slptool command line utility. The same utility can also be used to deregister an existing service offering without restarting slpd. See Section 17.1, “The SLP front-end slptool for details.

17.2.1 Setting up an SLP installation server Edit source

Announcing the installation data via SLP within your network makes the network installation much easier, since the installation data such as IP address of the server or the path to the installation media are automatically required via SLP query.

17.3 More information Edit source

RFC 2608, 2609, 2610

RFC 2608 generally deals with the definition of SLP. RFC 2609 deals with the syntax of the service URLs used in greater detail and RFC 2610 deals with DHCP via SLP.

http://www.openslp.org

The home page of the OpenSLP project.

/usr/share/doc/packages/openslp

This directory contains the documentation for SLP coming with the openslp-server package, including a README.SUSE containing the openSUSE Leap details, the RFCs, and two introductory HTML documents. Programmers who want to use the SLP functions find more information in the Programmers Guide that is included in the openslp-devel package.

18 Time synchronization with NTP Edit source

Abstract

The NTP (network time protocol) mechanism is a protocol for synchronizing the system time over the network. First, a machine can obtain the time from a server that is a reliable time source. Second, a machine can itself act as a time source for other computers in the network. The goal is twofold—maintaining the absolute time and synchronizing the system time of all machines within a network.

Maintaining an exact system time is important in many situations. The built-in hardware clock does often not meet the requirements of applications such as databases or clusters. Manual correction of the system time would lead to severe problems because, for example, a backward leap can cause malfunction of critical applications. Within a network, it is usually necessary to synchronize the system time of all machines, but manual time adjustment is a bad approach. NTP provides a mechanism to solve these problems. The NTP service continuously adjusts the system time with reliable time servers in the network. It further enables the management of local reference clocks, such as radio-controlled clocks.

Since openSUSE Leap 15, chrony is the default implementation of NTP. chrony includes two parts; chronyd is a daemon that can be started at boot time and chronyc is a command line interface program to monitor the performance of chronyd, and to change various operating parameters at runtime.

Starting with openSUSE Leap 15.2, the YaST module for NTP client configuration configures the systemd-timer instead of the cron daemon to execute chrony, when it is not configured to run as a daemon.

Note
Note

To enable time synchronization via active directory, follow the instructions found at Book “Security and Hardening Guide”, Chapter 7 “Active Directory support”, Section 7.3.3 “Joining Active Directory using Windows domain membership”, Joining an Active Directory domain using Windows domain membership.

18.1 Configuring an NTP client with YaST Edit source

The NTP daemon (chronyd) coming with the chrony package is preset to use the local computer hardware clock as a time reference. The precision of the hardware clock heavily depends on its time source. For example, an atomic clock or GPS receiver is a very precise time source, while a common RTC chip is not a reliable time source. YaST simplifies the configuration of an NTP client.

In the YaST NTP client configuration (Network Services › NTP Configuration) window, you can specify when to start the NTP daemon, the type of the configuration source, and add custom time servers.

NTP configuration window
Figure 18.1: NTP configuration window

18.1.1 NTP daemon start Edit source

You can choose from three options for when to start the NTP daemon:

Only manually

Select Only Manually to manually start the chrony daemon.

Synchronize without daemon

Select Synchronize without Daemon to set the system time periodically without a permanently running chrony. You can set the Interval of the Synchronization in Minutes.

Now and on boot

Select Now and On Boot to start chronyd automatically when the system is booted. This setting is recommended.

18.1.2 Type of the configuration source Edit source

In the Configuration Source drop-down box, select either Dynamic or Static. Set Static if your server uses only a fixed set of (public) NTP servers, while Dynamic is better if your internal network offers NTP servers via DHCP.

18.1.3 Configure time servers Edit source

Time servers for the client to query are listed in the lower part of the NTP Configuration window. Modify this list as needed with Add, Edit, and Delete.

Click Add to add a new time server:

Adding a time server
Figure 18.2: Adding a time server
  1. In the Address field, type the URL of the time server or pool of time servers with which you want to synchronize the machine time. After the URL is complete, click Test to verify that it points to a valid time source.

  2. Activate Quick Initial Sync to speed up the time synchronization by sending more requests at the chronyd daemon start.

  3. Activate Start Offline to speed up the boot time on systems that start the chronyd daemon automatically and may not have an Internet connection at boot time. This option is useful, for example, for laptops with network connections managed by NetworkManager.

  4. Confirm with OK.

18.2 Manually configuring NTP in the network Edit source

chrony reads its configuration from the /etc/chrony.conf file. To keep the computer clock synchronized, you need to tell chrony what time servers to use. You can use specific server names or IP addresses, for example:

0.suse.pool.ntp.org
1.suse.pool.ntp.org
2.suse.pool.ntp.org
3.suse.pool.ntp.org

You can also specify a pool name. Pool name resolves to several IP addresses:

pool pool.ntp.org
Tip
Tip: Computers on the same network

To synchronize time on multiple computers on the same network, we do not recommend to synchronize all of them with an external server. A good practice is to make one computer the time server which is synchronized with an external time server, and the other computers act as its clients. Add a local directive to the server's /etc/chrony.conf to distinguish it from an authoritative time server:

local stratum 10

To start chrony, run:

systemctl start chronyd.service

After initializing chronyd, it takes some time before the time is stabilized and the drift file for correcting the local computer clock is created. With the drift file, the systematic error of the hardware clock can be computed when the computer is powered on. The correction is used immediately, resulting in a higher stability of the system time.

To enable the service so that chrony starts automatically at boot time, run:

systemctl enable chronyd.service
Warning
Warning: Conflicting yast-timesync.service service

In addition to the chronyd.service service, openSUSE Leap includes yast-timesync.service. yast-timesync.service is triggered by a timer every 5 minutes and runs chronyd with the -q option to set the system time and exit. Because only one instance of chronyd can be running at any given time, do not enable or start both chronyd-related services at the same time.

18.3 Configure chronyd at runtime using chronyc Edit source

You can use chronyc to change the behavior of chronyd at runtime. It also generates status reports about the operation of chronyd.

You can run chronyc either in interactive or non-interactive mode. To run chronyc interactively, enter chronyc on the command line. It displays a prompt and waits for your command input. For example, to check how many NTP sources are online or offline, run:

# chronyc
chronyc> activity
200 OK
4 sources online
2 sources offline
1 sources doing burst (return to online)
1 sources doing burst (return to offline)
0 sources with unknown address

To exit chronyc's prompt, enter quit or exit.

If you do not need to use the interactive prompt, enter the command directly:

# chronyc activity
Note
Note: Temporary changes

Changes made using chronyc are not permanent. They will be lost after the next chronyd restart. For permanent changes, modify /etc/chrony.conf.

For a complete list of chronyc commands, see its manual page (man 1 chronyc).

18.4 Dynamic time synchronization at runtime Edit source

Although chronyd starts up normally on a system that boots without a network connection, the tool cannot resolve the DNS names of the time servers specified in the configuration file.

chronyd keeps trying to resolve the time server names specified by the server, pool, and peer directives in an increasing time interval until it succeeds.

If the time server will not be reachable when chronyd is started, you can specify the offline option:

server server_address offline

chronyd will then not try to poll the server until it is enabled using the following command:

# chronyc online server_address

When the auto_offline option is set, chronyd assumes that the time server has gone offline when two requests have been sent to it without receiving a response. This option avoids the need to run the 'offline' command from chronyc when disconnecting the network link.

18.5 Setting up a local reference clock Edit source

The software package chrony relies on other programs (such as gpsd) to access the timing data via the SHM or SOCK driver. Use the refclock directive in /etc/chrony.conf to specify a hardware reference clock to be used as a time source. It has two mandatory parameters: a driver name and a driver-specific parameter. The two parameters are followed by zero or more refclock options. chronyd includes the following drivers:

  • PPS - driver for the kernel pulse per second API. For example:

    refclock PPS /dev/pps0 lock NMEA refid GPS
  • SHM - NTP shared memory driver. For example:

    refclock SHM 0 poll 3 refid GPS1
    refclock SHM 1:perm=0644 refid GPS2
  • SOCK - Unix domain socket driver. For example:

    refclock SOCK /var/run/chrony.ttyS0.sock
  • PHC - PTP hardware clock driver. For example:

    refclock PHC /dev/ptp0 poll 0 dpoll -2 offset -37
    refclock PHC /dev/ptp1:nocrossts poll 3 pps

For more information on individual drivers' options, see man 8 chrony.conf.

19 The domain name system Edit source

Abstract

DNS (domain name system) is needed to resolve the domain names and host names into IP addresses. In this way, the IP address 192.168.2.100 is assigned to the host name jupiter, for example. Before setting up your own name server, read the general information about DNS in Section 13.3, “Name resolution”. The following configuration examples refer to BIND, the default DNS server.

19.1 DNS terminology Edit source

Zone

The domain name space is divided into regions called zones. For example, if you have example.com, you have the example section (or zone) of the com domain.

DNS server

The DNS server is a server that maintains the name and IP information for a domain. You can have a primary DNS server for primary zone, a secondary server for secondary zone, or a secondary server without any zones for caching.

Primary zone DNS server

The primary zone includes all hosts from your network and a DNS server primary zone stores up-to-date records for all the hosts in your domain.

Secondary zone DNS server

A secondary zone is a copy of the primary zone. The secondary zone DNS server obtains its zone data with zone transfer operations from its primary server. The secondary zone DNS server responds authoritatively for the zone if it has valid (not expired) zone data. If the secondary server cannot obtain a new copy of the zone data, it stops responding for the zone.

Forwarder

Forwarders are DNS servers to which your DNS server should send queries it cannot answer. To enable different configuration sources in one configuration, netconfig is used (see also man 8 netconfig).

Record

The record is information about name and IP address. Supported records and their syntax are described in BIND documentation. Some special records are:

NS record

An NS record tells name servers which machines are in charge of a given domain zone.

MX record

The MX (mail exchange) records describe the machines to contact for directing mail across the Internet.

SOA record

SOA (Start of Authority) record is the first record in a zone file. The SOA record is used when using DNS to synchronize data between multiple computers.

19.2 Installation Edit source

To install a DNS server, start YaST and select Software › Software Management. Choose View › Patterns and select DHCP and DNS Server. Confirm the installation of the dependent packages to finish the installation process.

Alternatively use the following command on the command line:

> sudo zypper in -t pattern dhcp_dns_server

19.3 Configuration with YaST Edit source

Use the YaST DNS module to configure a DNS server for the local network. When starting the module for the first time, a wizard starts, prompting you to make a few decisions concerning administration of the server. Completing this initial setup produces a basic server configuration. Use the expert mode to deal with more advanced configuration tasks, such as setting up ACLs, logging, TSIG keys, and other options.

19.3.1 Wizard configuration Edit source

The wizard consists of three steps or dialogs. At the appropriate places in the dialogs, you can enter the expert configuration mode.

  1. When starting the module for the first time, the Forwarder Settings dialog, shown in Figure 19.1, “DNS server installation: forwarder settings”, opens. The Local DNS Resolution Policy allows to set the following options:

    • Merging forwarders is disabled

    • Automatic merging

    • Merging forwarders is enabled

    • Custom configuration—If Custom configuration is selected, Custom policy can be specified; by default (with Automatic merging selected), Custom policy is set to auto, but here you can either set interface names or select from the two special policy names STATIC and STATIC_FALLBACK.

    In Local DNS Resolution Forwarder, specify which service to use: Using system name servers, This name server (bind), or Local dnsmasq server.

    For more information about all these settings, see man 8 netconfig.

    DNS server installation: forwarder settings
    Figure 19.1: DNS server installation: forwarder settings

    Forwarders are DNS servers to which your DNS server sends queries it cannot answer itself. Enter their IP address and click Add.

  2. The DNS Zones dialog consists of several parts and is responsible for the management of zone files, described in Section 19.6, “Zone files”. For a new zone, provide a name for it in Name. To add a reverse zone, the name must end in .in-addr.arpa. Finally, select the Type (primary, secondary, or forward). See Figure 19.2, “DNS server installation: DNS zones”. Click Edit to configure other settings of an existing zone. To remove a zone, click Delete.

    DNS server installation: DNS zones
    Figure 19.2: DNS server installation: DNS zones
  3. In the final dialog, you can open the DNS port in the firewall by clicking Open Port in Firewall. Then decide whether to start the DNS server when booting (On or Off). You can also activate LDAP support. See Figure 19.3, “DNS server installation: finish wizard”.

    DNS server installation: finish wizard
    Figure 19.3: DNS server installation: finish wizard

19.3.2 Expert configuration Edit source

After starting the module, YaST opens a window displaying several configuration options. Completing it results in a DNS server configuration with the basic functions in place:

19.3.2.1 Start-up Edit source

Under Start-Up, define whether the DNS server should be started when the booting the system or manually. To start the DNS server immediately, click Start DNS Server Now. To stop the DNS server, click Stop DNS Server Now. To save the current settings, select Save Settings and Reload DNS Server Now. You can open the DNS port in the firewall with Open Port in Firewall and modify the firewall settings with Firewall Details.

By selecting LDAP Support Active, the zone files are managed by an LDAP database. Any changes to zone data written to the LDAP database are picked up by the DNS server when it is restarted or prompted to reload its configuration.

19.3.2.2 Forwarders Edit source

If your local DNS server cannot answer a request, it tries to forward the request to a Forwarder, if configured so. This forwarder may be added manually to the Forwarder List. If the forwarder is not static like in dial-up connections, netconfig handles the configuration. For more information about netconfig, see man 8 netconfig.

19.3.2.3 Basic options Edit source

In this section, set basic server options. From the Option menu, select the desired item then specify the value in the corresponding text box. Include the new entry by selecting Add.

19.3.2.4 Logging Edit source

To set what the DNS server should log and how, select Logging. Under Log Type, specify where the DNS server should write the log data. Use the system-wide log by selecting System Log or specify a different file by selecting File. In the latter case, additionally specify a name, the maximum file size in megabytes and the number of log file versions to store.

Further options are available under Additional Logging. Enabling Log All DNS Queries causes every query to be logged, in which case the log file could grow large. For this reason, it is not a good idea to enable this option for other than debugging purposes. To log the data traffic during zone updates between DHCP and DNS server, enable Log Zone Updates. To log the data traffic during a zone transfer from primary to secondary server, enable Log Zone Transfer. See Figure 19.4, “DNS server: logging”.

DNS server: logging
Figure 19.4: DNS server: logging

19.3.2.5 ACLs Edit source

Use this dialog to define ACLs (access control lists) to enforce access restrictions. After providing a distinct name under Name, specify an IP address (with or without netmask) under Value in the following fashion:

{ 192.168.1/24; }

The syntax of the configuration file requires that the address ends with a semicolon and is put into curly braces.

19.3.2.6 TSIG keys Edit source

The main purpose of TSIGs (transaction signatures) is to secure communications between DHCP and DNS servers. They are described in Section 19.8, “Secure transactions”.

To generate a TSIG key, enter a distinctive name in the field labeled Key ID and specify the file where the key should be stored (Filename). Confirm your choices with Generate.

To use a previously created key, leave the Key ID field blank and select the file where it is stored under Filename. After that, confirm with Add.

19.3.2.7 DNS zones (adding a secondary zone) Edit source

To add a secondary zone, select DNS Zones, choose the zone type Secondary, write the name of the new zone, and click Add.

In the Zone Editor sub-dialog under Primary DNS Server IP, specify the primary server from which the secondary server should pull its data. To limit access to the server, select one of the ACLs from the list.

19.3.2.8 DNS zones (adding a primary zone) Edit source

To add a primary zone, select DNS Zones, choose the zone type Primary, write the name of the new zone, and click Add. When adding a primary zone, a reverse zone is also needed. For example, when adding the zone example.com that points to hosts in a subnet 192.168.1.0/24, you should also add a reverse zone for the IP-address range covered. By definition, this should be named 1.168.192.in-addr.arpa.

19.3.2.9 DNS zones (editing a primary zone) Edit source

To edit a primary zone, select DNS Zones, select the primary zone from the table and click Edit. The dialog consists of several pages: Basics (the one opened first), NS Records, MX Records, SOA, and Records.

The basic dialog, shown in Figure 19.5, “DNS server: Zone Editor (Basics)”, lets you define settings for dynamic DNS and access options for zone transfers to clients and secondary name servers. To permit the dynamic updating of zones, select Allow Dynamic Updates and the corresponding TSIG key. The key must have been defined before the update action starts. To enable zone transfers, select the corresponding ACLs. ACLs must have been defined already.

In the Basics dialog, select whether to enable zone transfers. Use the listed ACLs to define who can download zones.

DNS server: Zone Editor (Basics)
Figure 19.5: DNS server: Zone Editor (Basics)
Zone Editor (NS Records)

The NS Records dialog allows you to define alternative name servers for the zones specified. Make sure that your own name server is included in the list. To add a record, enter its name under Name Server to Add then confirm with Add. See Figure 19.6, “DNS server: Zone Editor (NS Records)”.

DNS server: Zone Editor (NS Records)
Figure 19.6: DNS server: Zone Editor (NS Records)
Zone Editor (MX Records)

To add a mail server for the current zone to the existing list, enter the corresponding address and priority value. After doing so, confirm by selecting Add. See Figure 19.7, “DNS server: Zone Editor (MX Records)”.

DNS server: Zone Editor (MX Records)
Figure 19.7: DNS server: Zone Editor (MX Records)
Zone Editor (SOA)

This page allows you to create SOA (start of authority) records. For an explanation of the individual options, refer to Example 19.6, “The /var/lib/named/example.com.zone file”. Changing SOA records is not supported for dynamic zones managed via LDAP.

DNS server: Zone Editor (SOA)
Figure 19.8: DNS server: Zone Editor (SOA)
Zone Editor (Records)

This dialog manages name resolution. In Record Key, enter the host name then select its type. The A type represents the main entry. The value for this should be an IP address (IPv4). Use AAAA for IPv6 addresses. CNAME is an alias. Use the types NS and MX for detailed or partial records that expand on the information provided in the NS Records and MX Records tabs. These three types resolve to an existing A record. PTR is for reverse zones. It is the opposite of an A record, for example:

hostname.example.com. IN A 192.168.0.1
1.0.168.192.in-addr.arpa IN PTR hostname.example.com.
19.3.2.9.1 Adding reverse zones Edit source

To add a reverse zone, follow this procedure:

  1. Start YaST › DNS Server › DNS Zones.

  2. If you have not added a primary forward zone, add it and Edit it.

  3. In the Records tab, fill the corresponding Record Key and Value, then add the record with Add and confirm with OK. If YaST complains about a non-existing record for a name server, add it in the NS Records tab.

    Adding a record for a primary zone
    Figure 19.9: Adding a record for a primary zone
  4. Back in the DNS Zones window, add a reverse primary zone.

    Adding a reverse zone
    Figure 19.10: Adding a reverse zone
  5. Edit the reverse zone, and in the Records tab, you can see the PTR: Reverse translation record type. Add the corresponding Record Key and Value, then click Add and confirm with OK.

    Adding a reverse record
    Figure 19.11: Adding a reverse record

    Add a name server record if needed.

Tip
Tip: Editing the reverse zone

After adding a forward zone, go back to the main menu and select the reverse zone for editing. There in the tab Basics activate the check box Automatically Generate Records From and select your forward zone. That way, all changes to the forward zone are automatically updated in the reverse zone.

19.4 Starting the BIND name server Edit source

On a openSUSE® Leap system, the name server BIND (Berkeley Internet Name Domain) comes preconfigured, so it can be started right after installation without any problems. Normally, if you already have an Internet connection and entered 127.0.0.1 as the name server address for localhost in /var/run/netconfig/resolv.conf, you already have a working name resolution without needing to know the DNS of the provider. BIND carries out name resolution via the root name server, a notably slower process. Normally, the DNS of the provider should be entered with its IP address in the configuration file /etc/named.conf under forwarders to ensure effective and secure name resolution. If this works so far, the name server runs as a pure caching-only name server. Only when you configure its own zones it becomes a proper DNS. Find a simple example documented in /usr/share/doc/packages/bind/config.

Tip
Tip: Automatic adaptation of the name server information

Depending on the type of Internet connection or the network connection, the name server information can automatically be adapted to the current conditions. To do this, set the NETCONFIG_DNS_POLICY variable in the /etc/sysconfig/network/config file to auto.

However, do not set up an official domain until one is assigned to you by the responsible institution. Even if you have your own domain and it is managed by the provider, you are better off not using it, because BIND would otherwise not forward requests for this domain. The Web server at the provider, for example, would not be accessible for this domain.

To start the name server, enter the command systemctl start named as root. Check with systemctl status named whether named (as the name server process is called) has been started successfully. Test the name server immediately on the local system with the host or dig programs, which should return localhost as the default server with the address 127.0.0.1. If this is not the case, /var/run/netconfig/resolv.conf probably contains an incorrect name server entry or the file does not exist. For the first test, enter host 127.0.0.1, which should always work. If you get an error message, use systemctl status named to see whether the server is running. If the name server does not start or behaves unexpectedly, check the output of journalctl -e.

To use the name server of the provider (or one already running on your network) as the forwarder, enter the corresponding IP address or addresses in the options section under forwarders. The addresses included in Example 19.1, “Forwarding options in named.conf” are examples only. Adjust these entries to your own setup.

Example 19.1: Forwarding options in named.conf
options {
        directory "/var/lib/named";
        forwarders { 10.11.12.13; 10.11.12.14; };
        listen-on { 127.0.0.1; 192.168.1.116; };
        allow-query { 127/8; 192.168/16 };
        notify no;
};

The options entry is followed by entries for the zone, localhost, and 0.0.127.in-addr.arpa. The type hint entry under . should always be present. The corresponding files do not need to be modified and should work as they are. Also make sure that each entry is closed with a ; and that the curly braces are in the correct places. After changing the configuration file /etc/named.conf or the zone files, tell BIND to reread them with systemctl reload named. Achieve the same by stopping and restarting the name server with systemctl restart named. Stop the server at any time by entering systemctl stop named.

19.5 The /etc/named.conf configuration file Edit source

All the settings for the BIND name server itself are stored in the /etc/named.conf file. However, the zone data for the domains to handle (consisting of the host names, IP addresses, and so on) are stored in separate files in the /var/lib/named directory. The details of this are described later.

/etc/named.conf is roughly divided into two areas. One is the options section for general settings and the other consists of zone entries for the individual domains. A logging section and acl (access control list) entries are optional. Comment lines begin with a # sign or //. A minimal /etc/named.conf is shown in Example 19.2, “A basic /etc/named.conf”.

Example 19.2: A basic /etc/named.conf
options {
        directory "/var/lib/named";
        forwarders { 10.0.0.1; };
        notify no;
};

zone "localhost" in {
       type master;
       file "localhost.zone";
};

zone "0.0.127.in-addr.arpa" in {
        type master;
        file "127.0.0.zone";
};

zone "." in {
        type hint;
        file "root.hint";
};

19.5.1 Important configuration options Edit source

directory "FILENAME";

Specifies the directory in which BIND can find the files containing the zone data. Usually, this is /var/lib/named.

forwarders { IP-ADDRESS; };

Specifies the name servers (mostly of the provider) to which DNS requests should be forwarded if they cannot be resolved directly. Replace IP-ADDRESS with an IP address like 192.168.1.116.

forward first;

Causes DNS requests to be forwarded before an attempt is made to resolve them via the root name servers. Instead of forward first, forward only can be written to have all requests forwarded and none sent to the root name servers. This makes sense for firewall configurations.

listen-on port 53 { 127.0.0.1; IP-ADDRESS; };

Tells BIND on which network interfaces and port to accept client queries. port 53 does not need to be specified explicitly, because 53 is the default port. Enter 127.0.0.1 to permit requests from the local host. If you omit this entry entirely, all interfaces are used by default.

listen-on-v6 port 53 {any; };

Tells BIND on which port it should listen for IPv6 client requests. The only alternative to any is none. As far as IPv6 is concerned, the server only accepts wild card addresses.

query-source address * port 53;

This entry is necessary if a firewall is blocking outgoing DNS requests. This tells BIND to post requests externally from port 53 and not from any of the high ports above 1024.

query-source-v6 address * port 53;

Tells BIND which port to use for IPv6 queries.

allow-query { 127.0.0.1; NET; };

Defines the networks from which clients can post DNS requests. Replace NET with address information like 192.168.2.0/24. The /24 at the end is an abbreviated expression for the netmask (in this case 255.255.255.0).

allow-transfer ! *;;

Controls which hosts can request zone transfers. In the example, such requests are denied with ! *. Without this entry, zone transfers can be requested from anywhere without restrictions.

statistics-interval 0;

Without this entry, BIND generates several lines of statistical information per hour in the system's journal. Set it to 0 to suppress these statistics or set an interval in minutes.

cleaning-interval 720;

This option defines at which time intervals BIND clears its cache. This triggers an entry in the system's journal each time it occurs. The time specification is in minutes. The default is 60 minutes.

interface-interval 0;

BIND regularly searches the network interfaces for new or nonexistent interfaces. If this value is set to 0, this is not done and BIND only listens at the interfaces detected at start-up. Otherwise, the interval can be defined in minutes. The default is sixty minutes.

notify no;

no prevents other name servers from being informed when changes are made to the zone data or when the name server is restarted.

For a list of available options, read the manual page man 5 named.conf.

19.5.2 Logging Edit source

What, how and where logging takes place can be extensively configured in BIND. Normally, the default settings should be sufficient. Example 19.3, “Entry to disable logging”, shows the simplest form of such an entry and suppresses any logging.

Example 19.3: Entry to disable logging
logging {
        category default { null; };
};

19.5.3 Zone entries Edit source

Example 19.4: Zone entry for example.com
zone "example.com" in {
      type master;
      file "example.com.zone";
      notify no;
};

After zone, specify the name of the domain to administer (example.com) followed by in and a block of relevant options enclosed in curly braces, as shown in Example 19.4, “Zone entry for example.com”. To define a secondary zone, switch the type to secondary and specify a name server that administers this zone as primary (which, in turn, may be a secondary server of another primary server), as shown in Example 19.5, “Zone entry for example.net”.

Example 19.5: Zone entry for example.net
zone "example.net" in {
      type secondary;
      file "secondary/example.net.zone";
      
      masters { 10.0.0.1; }; 
};

The zone options:

type primary;

By specifying primary, tell BIND that the zone is handled by the local name server. This assumes that a zone file has been created in the correct format.

type secondary;

This zone is transferred from another name server. It must be used together with primary_servers.

type hint;

The zone . of the hint type is used to set the root name servers. This zone definition can be left as is.

file example.com.zone or file secondary/example.net.zone;

This entry specifies the file where zone data for the domain is located. This file is not required for a secondary server, because this data is pulled from another name server. To differentiate files of the primary and secondary server, use the directory secondary for the secondary files.

primary_servers { SERVER_IP_ADDRESS; };

This entry is only needed for secondary zones. It specifies from which name server the zone file should be transferred.

allow-update {! *; };

This option controls external write access, which would allow clients to make a DNS entry—something not normally desirable for security reasons. Without this entry, zone updates are not allowed. The above entry achieves the same because ! * effectively bans any such activity.

19.6 Zone files Edit source

Two types of zone files are needed. One assigns IP addresses to host names and the other does the reverse: it supplies a host name for an IP address.

Tip
Tip: Using the dot (period, full stop) in zone files

The "." has an important meaning in the zone files. If host names are given without a final dot (.), the zone is appended. Complete host names specified with a full domain name must end with a dot (.) to avoid having the domain added to it again. A missing or wrongly placed "." is the most frequent cause of name server configuration errors.

The first case to consider is the zone file example.com.zone, responsible for the domain example.com, shown in Example 19.6, “The /var/lib/named/example.com.zone file”.

Example 19.6: The /var/lib/named/example.com.zone file
$TTL 2D 1
example.com. IN SOA      dns  root.example.com. ( 2
             2003072441  ; serial 3
             1D          ; refresh 4
             2H          ; retry 5
             1W          ; expiry 6
             2D )        ; minimum 7

             IN NS       dns 8
             IN MX       10 mail dns 9
gate         IN A        192.168.5.1 10
             IN A        10.0.0.1
dns          IN A        192.168.1.116
mail         IN A        192.168.3.108
jupiter      IN A        192.168.2.100
venus        IN A        192.168.2.101
saturn       IN A        192.168.2.102
mercury      IN A        192.168.2.103
ntp          IN CNAME    dns 11
dns6         IN A6  0    2002:c0a8:174::

1

$TTL defines the default time to live that should apply to all the entries in this file. In this example, entries are valid for a period of two days (2 D).

2

This is where the SOA (start of authority) control record begins:

  • The name of the domain to administer is example.com in the first position. This ends with ".", because otherwise the zone would be appended a second time. Alternatively, @ can be entered here, in which case the zone would be extracted from the corresponding entry in /etc/named.conf.

  • After IN SOA is the name of the name server in charge as a primary server for this zone. The name is expanded from dns to dns.example.com, because it does not end with a ".".

  • An e-mail address of the person in charge of this name server follows. Because the @ sign already has a special meaning, "." is entered here instead. For root@example.com the entry must read root.example.com.. The "." must be included at the end to prevent the zone from being added.

  • The ( includes all lines up to ) into the SOA record.

3

The serial number is a 10-digit number. It must be changed each time this file is changed. It is needed to inform the secondary name servers (secondary servers) of changes. For this, a 10-digit number of the date and run number, written as YYYYMMDDNN, has become the customary format (YYYY = year, MM = month and DD = day. NN is a sequence number in case you update it more than once on the given day).

4

The refresh rate specifies the time interval at which the secondary name servers verify the zone serial number. In this case, one day.

5

The retry rate specifies the time interval at which a secondary name server, in case of error, attempts to contact the primary server again. Here, two hours.

6

The expiration time specifies the time frame after which a secondary name server discards the cached data if it has not regained contact to the primary server. Here, a week.

7

The last entry in the SOA record specifies the negative caching TTL—the time for which results of unresolved DNS queries from other servers may be cached.

8

The IN NS specifies the name server responsible for this domain. dns is extended to dns.example.com because it does not end with a ".". There can be several lines like this—one for the primary and one for each secondary name server. If notify is not set to no in /etc/named.conf, all the name servers listed here are informed of the changes made to the zone data.

9

The MX record specifies the mail server that accepts, processes, and forwards e-mails for the domain example.com. In this example, this is the host mail.example.com. The number in front of the host name is the preference value. If there are multiple MX entries, the mail server with the smallest value is taken first. If mail delivery to this server fails, the entry with the next-smallest value is used.

10

This and the following lines are the actual address records where one or more IP addresses are assigned to host names. The names are listed here without a "." because they do not include their domain, so example.com is added to all of them. Two IP addresses are assigned to the host gate, as it has two network cards. Wherever the host address is a traditional one (IPv4), the record is marked with A. If the address is an IPv6 address, the entry is marked with AAAA.

Note
Note: IPv6 syntax

The IPv6 record has a slightly different syntax than IPv4. Because of the fragmentation possibility, it is necessary to provide information about missed bits before the address. To fill up the IPv6 address with the needed number of 0, add two colons at the correct place in the address.

pluto     AAAA 2345:00C1:CA11::1234:5678:9ABC:DEF0
pluto     AAAA 2345:00D2:DA11::1234:5678:9ABC:DEF0

11

The alias ntp can be used to address dns (CNAME means canonical name).

The pseudo domain in-addr.arpa is used for the reverse lookup of IP addresses into host names. It is appended to the network part of the address in reverse notation. So 192.168 is resolved into 168.192.in-addr.arpa. See Example 19.7, “Reverse lookup”.

Example 19.7: Reverse lookup
$TTL 2D 1
168.192.in-addr.arpa.   IN SOA dns.example.com. root.example.com. ( 2
                        2003072441      ; serial
                        1D              ; refresh
                        2H              ; retry
                        1W              ; expiry
                        2D )            ; minimum

                        IN NS           dns.example.com. 3

1.5                     IN PTR          gate.example.com. 4
100.3                   IN PTR          www.example.com.
253.2                   IN PTR          cups.example.com.

1

$TTL defines the standard TTL that applies to all entries here.

2

The configuration file should activate reverse lookup for the network 192.168. Given that the zone is called 168.192.in-addr.arpa, it should not be added to the host names. Therefore, all host names are entered in their complete form—with their domain and with a "." at the end. The remaining entries correspond to those described for the previous example.com example.

See Example 19.6, “The /var/lib/named/example.com.zone file” for detail on the entries within this record.

3

This line specifies the name server responsible for this zone. This time, however, the name is entered in its complete form with the domain and a "." at the end.

4

This, and the following lines, are the pointer records hinting at the IP addresses on the respective hosts. Only the last part of the IP address is entered at the beginning of the line, without the "." at the end. Appending the zone to this (without the .in-addr.arpa) results in the complete IP address in reverse order.

Normally, zone transfers between different versions of BIND should be possible without any problems.

19.7 Dynamic update of zone data Edit source

The term dynamic update refers to operations by which entries in the zone files of a primary server are added, changed or deleted. This mechanism is described in RFC 2136. Dynamic update is configured individually for each zone entry by adding an optional allow-update or update-policy rule. Zones to update dynamically should not be edited by hand.

Transmit the entries to update to the server with the command nsupdate. For the exact syntax of this command, check the manual page for nsupdate (man 8 nsupdate). For security reasons, any such update should be performed using TSIG keys as described in Section 19.8, “Secure transactions”.

19.8 Secure transactions Edit source

Secure transactions can be made with transaction signatures (TSIGs) based on shared secret keys (also called TSIG keys). This section describes how to generate and use such keys.

Secure transactions are needed for communication between different servers and for the dynamic update of zone data. Making the access control dependent on keys is much more secure than merely relying on IP addresses.

Generate a TSIG key with the following command (for details, see man tsig-keygen):

> sudo tsig-keygen -a hmac-md5 host1-host2 > host1-host2.key

This creates a file with the name host1-host2.key with contents that may look as follows:

key "host1-host2" {                       |
    algorithm hmac-md5;
    secret "oHpBLgtcZso6wxnRTWdJMA==";
};

The file must be transferred to the remote host, preferably in a secure way (using scp, for example). To enable a secure communication between host1 and host2, the key must be included in the /etc/named.conf file on both the local and the remote server.

key host1-host2 {
 algorithm hmac-md5;
 secret "ejIkuCyyGJwwuN3xAteKgg==";
};
Warning
Warning: File permissions of /etc/named.conf

Make sure that the permissions of /etc/named.conf are properly restricted. The default for this file is 0640, with the owner being root and the group named. As an alternative, move the keys to an extra file with specially limited permissions, which is then included from /etc/named.conf. To include an external file, use:

include  "filename"

Replace filename with an absolute path to your file with keys.

To enable the server host1 to use the key for host2 (which has the address 10.1.2.3 in this example), the server's /etc/named.conf must include the following rule:

server 10.1.2.3 {
  keys { host1-host2. ;};
};

Analogous entries must be included in the configuration files of host2.

Add TSIG keys for any ACLs (access control lists, not to be confused with file system ACLs) that are defined for IP addresses and address ranges to enable transaction security. The corresponding entry could look like this:

allow-update { key host1-host2. ;};

This topic is discussed in more detail in the BIND Administrator Reference Manual under update-policy.

19.9 DNS security Edit source

DNSSEC, or DNS security, is described in RFC 2535. The tools available for DNSSEC are discussed in the BIND Manual.

A zone considered secure must have one or several zone keys associated with it. These are generated with dnssec-keygen, as are the host keys. The DSA encryption algorithm is currently used to generate these keys. The public keys generated should be included in the corresponding zone file with an $INCLUDE rule.

With the command dnssec-signzone, you can create sets of generated keys (keyset- files), transfer them to the parent zone in a secure manner, and sign them. This generates the files to include for each zone in /etc/named.conf.

19.10 More information Edit source

For more information, see the BIND Administrator Reference Manual from the bind-doc package, which is installed under /usr/share/doc/packages/bind/arm. Consider additionally consulting the RFCs referenced by the manual and the manual pages included with BIND. /usr/share/doc/packages/bind/README.SUSE contains up-to-date information about BIND in openSUSE Leap.

20 DHCP Edit source

Abstract

The purpose of the Dynamic Host Configuration Protocol (DHCP) is to assign network settings centrally (from a server) rather than configuring them locally on every workstation. A host configured to use DHCP does not have control over its own static address. It is enabled to configure itself automatically according to directions from the server. If you use the NetworkManager on the client side, you do not need to configure the client. This is useful if you have changing environments and only one interface active at a time. Never use NetworkManager on a machine that runs a DHCP server.

One way to configure a DHCP server is to identify each client using the hardware address of its network card (which should usually be fixed), then supply that client with identical settings each time it connects to the server. DHCP can also be configured to assign addresses to each relevant client dynamically from an address pool set up for this purpose. In the latter case, the DHCP server tries to assign the same address to the client each time it receives a request, even over extended periods. This works only if the network does not have more clients than addresses.

DHCP makes life easier for system administrators. Any changes, even bigger ones, related to addresses and the network configuration can be implemented centrally by editing the server's configuration file. This is much more convenient than reconfiguring multiple workstations. It is also much easier to integrate machines, particularly new machines, into the network, because they can be given an IP address from the pool. Retrieving the appropriate network settings from a DHCP server is especially useful in case of laptops regularly used in different networks.

In this chapter, the DHCP server will run in the same subnet as the workstations, 192.168.2.0/24 with 192.168.2.1 as gateway. It has the fixed IP address 192.168.2.254 and serves two address ranges, 192.168.2.10 to 192.168.2.20 and 192.168.2.100 to 192.168.2.200.

A DHCP server supplies not only the IP address and the netmask, but also the host name, domain name, gateway and name server addresses for the client to use. In addition to that, DHCP allows several parameters to be configured in a centralized way, for example, a time server from which clients may poll the current time or even a print server.

20.1 Configuring a DHCP server with YaST Edit source

To install a DHCP server, start YaST and select Software › Software Management. Choose Filter › Patterns and select DHCP and DNS Server. Confirm the installation of the dependent packages to finish the installation process.

Important
Important: LDAP support

The YaST DHCP module can be set up to store the server configuration locally (on the host that runs the DHCP server) or to have its configuration data managed by an LDAP server. To use LDAP, set up your LDAP environment before configuring the DHCP server.

For more information about LDAP, see Book “Security and Hardening Guide”, Chapter 5 “LDAP with 389 Directory Server”.

The YaST DHCP module (yast2-dhcp-server) allows you to set up your own DHCP server for the local network. The module can run in wizard mode or expert configuration mode.

20.1.1 Initial configuration (wizard) Edit source

When the module is started for the first time, a wizard starts, prompting you to make a few basic decisions concerning server administration. Completing this initial setup produces a basic server configuration that should function in its essential aspects. The expert mode can be used to deal with more advanced configuration tasks. Proceed as follows:

  1. Select the interface from the list to which the DHCP server should listen and click Select and then Next. See Figure 20.1, “DHCP server: card selection”.

    Note
    Note: DHCP and firewalld

    The option Open Firewall for Selected Interfaces does not (yet) support firewalld in openSUSE Leap 15.5. To manually open the DHCP port, run

           > sudo firewall-cmd --zone=public --permanent --add-service=dhcp
           > sudo firewall-cmd --reload
    DHCP server: card selection
    Figure 20.1: DHCP server: card selection
  2. Use the check box to determine whether your DHCP settings should be automatically stored by an LDAP server. In the text boxes, provide the network specifics for all clients the DHCP server should manage. These specifics are the domain name, address of a time server, addresses of the primary and secondary name server, addresses of a print and a WINS server (for a mixed network with both Windows and Linux clients), gateway address, and lease time. See Figure 20.2, “DHCP server: global settings”.

    DHCP server: global settings
    Figure 20.2: DHCP server: global settings
  3. Configure how dynamic IP addresses should be assigned to clients. To do so, specify an IP range from which the server can assign addresses to DHCP clients. All these addresses must be covered by the same netmask. Also specify the lease time during which a client may keep its IP address without needing to request an extension of the lease. Optionally, specify the maximum lease time—the period during which the server reserves an IP address for a particular client. See Figure 20.3, “DHCP server: dynamic DHCP”.

    DHCP server: dynamic DHCP
    Figure 20.3: DHCP server: dynamic DHCP
  4. Define how the DHCP server should be started. Specify whether to start the DHCP server automatically when the system is booted or manually when needed (for example, for testing purposes). Click Finish to complete the configuration of the server. See Figure 20.4, “DHCP server: start-up”.

    DHCP server: start-up
    Figure 20.4: DHCP server: start-up
  5. Instead of using dynamic DHCP in the way described in the preceding steps, you can also configure the server to assign addresses in quasi-static fashion. Use the text boxes provided in the lower part to specify a list of the clients to manage in this way. Specifically, provide the Name and the IP Address to give to such a client, the Hardware Address, and the Network Type (token ring or Ethernet). Modify the list of clients, which is shown in the upper part with Add, Edit, and Delete from List. See Figure 20.5, “DHCP server: host management”.

    DHCP server: host management
    Figure 20.5: DHCP server: host management

20.1.2 DHCP server configuration (expert) Edit source

In addition to the configuration method discussed earlier, there is also an expert configuration mode that allows you to change the DHCP server setup in every detail. Start the expert configuration by clicking DHCP Server Expert Configuration in the Start-Up dialog (see Figure 20.4, “DHCP server: start-up”).

Chroot environment and declarations

In this first dialog, make the existing configuration editable by selecting Start DHCP Server. An important feature of the behavior of the DHCP server is its ability to run in a chroot environment, or chroot jail, to secure the server host. If the DHCP server should ever be compromised by an outside attack, the attacker will still be in the chroot jail, which prevents them from accessing the rest of the system. The lower part of the dialog displays a tree view with the declarations that have already been defined. Modify these with Add, Delete, and Edit. Selecting Advanced takes you to additional expert dialogs. See Figure 20.6, “DHCP server: chroot jail and declarations”. After selecting Add, define the type of declaration to add. With Advanced, view the log file of the server, configure TSIG key management, and adjust the configuration of the firewall according to the setup of the DHCP server.

DHCP server: chroot jail and declarations
Figure 20.6: DHCP server: chroot jail and declarations
Selecting the declaration type

The Global Options of the DHCP server are made up of several declarations. This dialog lets you set the declaration types Subnet, Host, Shared Network, Group, Pool of Addresses, and Class. This example shows the selection of a new subnet (see Figure 20.7, “DHCP server: selecting a declaration type”).

DHCP server: selecting a declaration type
Figure 20.7: DHCP server: selecting a declaration type
Subnet configuration

This dialog allows you specify a new subnet with its IP address and netmask. In the middle part of the dialog, modify the DHCP server start options for the selected subnet using Add, Edit, and Delete. To set up dynamic DNS for the subnet, select Dynamic DNS.

DHCP server: configuring subnets
Figure 20.8: DHCP server: configuring subnets
TSIG key management

If you chose to configure dynamic DNS in the previous dialog, you can now configure the key management for a secure zone transfer. Selecting OK takes you to another dialog in which to configure the interface for dynamic DNS (see Figure 20.10, “DHCP server: interface configuration for dynamic DNS”).

DHCP server: TSIG configuration
Figure 20.9: DHCP server: TSIG configuration
Dynamic DNS: interface configuration

You can now activate dynamic DNS for the subnet by selecting Enable Dynamic DNS for This Subnet. After doing so, use the drop-down box to activate the TSIG keys for forward and reverse zones, making sure that the keys are the same for the DNS and the DHCP server. With Update Global Dynamic DNS Settings, enable the automatic update and adjustment of the global DHCP server settings according to the dynamic DNS environment. Finally, define which forward and reverse zones should be updated per dynamic DNS, specifying the name of the primary name server for each of the two zones. Selecting OK returns to the subnet configuration dialog (see Figure 20.8, “DHCP server: configuring subnets”). Selecting OK again returns to the original expert configuration dialog.

DHCP server: interface configuration for dynamic DNS
Figure 20.10: DHCP server: interface configuration for dynamic DNS
Note
Note: ignore client-updates option

When enabling Dynamic DNS for a zone, YaST automatically adds the ignore client-updates option to improve client compatibility. The option can be disabled if it is not required.

Network interface configuration

To define the interfaces the DHCP server should listen to and to adjust the firewall configuration, select Advanced › Interface Configuration from the expert configuration dialog. From the list of interfaces displayed, select one or more that should be attended by the DHCP server. If clients in all subnets need to be able to communicate with the server and the server host also runs a firewall, adjust the firewall accordingly.

Note
Note: DHCP and firewalld

The option Open Firewall for Selected Interfaces does not (yet) support firewalld in openSUSE Leap 15.5. To manually open the DHCP port, run

        > sudo firewall-cmd --zone=public --permanent --add-service=dhcp
        > sudo firewall-cmd --reload
DHCP server: network interface and firewall
Figure 20.11: DHCP server: network interface and firewall

After completing all configuration steps, close the dialog with OK. The server is now started with its new configuration.

20.2 DHCP software packages Edit source

Both the DHCP server and the DHCP clients are available for openSUSE Leap. The DHCP server available is dhcpd (published by the Internet Systems Consortium). On the client side, there is dhcp-client (also from ISC) and tools coming with the wicked package.

By default, the wicked tools are installed with the services wickedd-dhcp4 and wickedd-dhcp6. Both are launched automatically on each system boot to watch for a DHCP server. They do not need a configuration file to do their job and work out of the box in most standard setups. For more complex situations, use the ISC dhcp-client, which is controlled by the configuration files /etc/dhclient.conf and /etc/dhclient6.conf.

20.3 The DHCP server dhcpd Edit source

The core of any DHCP system is the dynamic host configuration protocol daemon. This server leases addresses and watches how they are used, according to the settings defined in the configuration file /etc/dhcpd.conf. By changing the parameters and values in this file, a system administrator can influence the program's behavior in numerous ways. Look at the basic sample /etc/dhcpd.conf file in Example 20.1, “The configuration file /etc/dhcpd.conf”.

Example 20.1: The configuration file /etc/dhcpd.conf
default-lease-time 600;         # 10 minutes
max-lease-time 7200;            # 2  hours

option domain-name "example.com";
option domain-name-servers 192.168.1.116;
option broadcast-address 192.168.2.255;
option routers 192.168.2.1;
option subnet-mask 255.255.255.0;

subnet 192.168.2.0 netmask 255.255.255.0
 {
  range 192.168.2.10 192.168.2.20;
  range 192.168.2.100 192.168.2.200;
 }

This simple configuration file should be sufficient to get the DHCP server to assign IP addresses in the network. Make sure that a semicolon is inserted at the end of each line, because otherwise dhcpd is not started.

The sample file can be divided into three sections. The first one defines how many seconds an IP address is leased to a requesting client by default (default-lease-time) before it should apply for renewal. This section also includes a statement of the maximum period for which a machine may keep an IP address assigned by the DHCP server without applying for renewal (max-lease-time).

In the second part, some basic network parameters are defined on a global level:

  • The line option domain-name defines the default domain of your network.

  • With the entry option domain-name-servers, specify up to three values for the DNS servers used to resolve IP addresses into host names and vice versa. Ideally, configure a name server on your machine or somewhere else in your network before setting up DHCP. That name server should also define a host name for each dynamic address and vice versa. To learn how to configure your own name server, read Chapter 19, The domain name system.

  • The line option broadcast-address defines the broadcast address the requesting client should use.

  • With option routers, set where the server should send data packets that cannot be delivered to a host on the local network (according to the source and target host address and the subnet mask provided). Especially in smaller networks, this router is identical to the Internet gateway.

  • With option subnet-mask, specify the netmask assigned to clients.

The last section of the file defines a network, including a subnet mask. To finish, specify the address range that the DHCP daemon should use to assign IP addresses to interested clients. In Example 20.1, “The configuration file /etc/dhcpd.conf”, clients may be given any address between 192.168.2.10 and 192.168.2.20 or 192.168.2.100 and 192.168.2.200.

After editing these few lines, you should be able to activate the DHCP daemon with the command systemctl start dhcpd. It will be ready for use immediately. Use the command rcdhcpd check-syntax to perform a brief syntax check. If you encounter any unexpected problems with your configuration (the server aborts with an error or does not return done on start), you should be able to find out what has gone wrong by looking for information either in the main system log that can be queried with the command journalctl (see Chapter 11, journalctl: query the systemd journal for more information).

On a default openSUSE Leap system, the DHCP daemon is started in a chroot environment for security reasons. The configuration files must be copied to the chroot environment so the daemon can find them. Normally, there is no need to worry about this because the command systemctl start dhcpd automatically copies the files.

20.3.1 Clients with fixed IP addresses Edit source

DHCP can also be used to assign a predefined, static address to a specific client. Addresses assigned explicitly always take priority over dynamic addresses from the pool. A static address never expires in the way a dynamic address would, for example, if there were not enough addresses available and the server needed to redistribute them among clients.

To identify a client configured with a static address, dhcpd uses the hardware address (which is a globally unique, fixed numerical code consisting of six octet pairs) for the identification of all network devices (for example, 00:30:6E:08:EC:80). If the respective lines, like the ones in Example 20.2, “Additions to the configuration file”, are added to the configuration file of Example 20.1, “The configuration file /etc/dhcpd.conf”, the DHCP daemon always assigns the same set of data to the corresponding client.

Example 20.2: Additions to the configuration file
host jupiter {
hardware ethernet 00:30:6E:08:EC:80;
fixed-address 192.168.2.100;
}

The name of the respective client (host HOSTNAME, here jupiter) is entered in the first line and the MAC address in the second line. On Linux hosts, find the MAC address with the command ip link show followed by the network device (for example, eth0). The output should contain something like

link/ether 00:30:6E:08:EC:80

In the preceding example, a client with a network card having the MAC address 00:30:6E:08:EC:80 is assigned the IP address 192.168.2.100 and the host name jupiter automatically. The type of hardware to enter is ethernet in nearly all cases, although token-ring, which is often found on IBM systems, is also supported.

20.3.2 The openSUSE Leap version Edit source

To improve security, the openSUSE Leap version of the ISC's DHCP server comes with the non-root/chroot patch by Ari Edelkind applied. This enables dhcpd to run with the user ID nobody and run in a chroot environment (/var/lib/dhcp). To make this possible, the configuration file dhcpd.conf must be located in /var/lib/dhcp/etc. The init script automatically copies the file to this directory when starting.

Control the server's behavior regarding this feature via entries in the file /etc/sysconfig/dhcpd. To run dhcpd without the chroot environment, set the variable DHCPD_RUN_CHROOTED in /etc/sysconfig/dhcpd to no.

To enable dhcpd to resolve host names even from within the chroot environment, the following configuration files must be copied as well:

  • /etc/localtime

  • /etc/host.conf

  • /etc/hosts

  • /var/run/netconfig/resolv.conf

These files are copied to /var/lib/dhcp/etc/ when starting the init script. Take these copies into account for any changes that they require if they are dynamically modified by scripts like /etc/ppp/ip-up. However, there should be no need to worry about this if the configuration file only specifies IP addresses (instead of host names).

If your configuration includes additional files that should be copied into the chroot environment, set these under the variable DHCPD_CONF_INCLUDE_FILES in the file /etc/sysconfig/dhcpd. To ensure that the DHCP logging facility keeps working even after a restart of the syslog daemon, there is an additional entry SYSLOGD_ADDITIONAL_SOCKET_DHCP in the file /etc/sysconfig/syslog.

20.4 More information Edit source

More information about DHCP is available at the Web site of the Internet Systems Consortium (https://www.isc.org/dhcp/). Information is also available in the dhcpd, dhcpd.conf, dhcpd.leases, and dhcp-options man pages.

21 Samba Edit source

Abstract

Using Samba, a Unix machine can be configured as a file and print server for macOS, Windows, and OS/2 machines. Samba has developed into a fully-fledged and rather complex product. Configure Samba with YaST, or by editing the configuration file manually.

Important
Important: SMB1 is unsupported

Starting with Samba version 4.17, the SMB1 protocol has been disabled in openSUSE Leap.

21.1 Terminology Edit source

The following are some terms used in Samba documentation and in the YaST module.

SMB protocol

Samba uses the SMB (server message block) protocol, which is based on NetBIOS services. Microsoft released the protocol so that software from other manufacturers could establish connections to a servers running Microsoft operating systems. Samba implements the SMB protocol on top of the TCP/IP protocol, which means that TCP/IP must be installed and enabled on all clients.

CIFS protocol

The CIFS (Common Internet File System) protocol is an early version of the SMB protocol, also known as SMB1. CIFS defines a standard remote file system access protocol for use over TCP/IP, enabling groups of users to work together and share documents across the Internet.

SMB1 was superseded by SMB2, first released as part of Microsoft Windows Vista™. This was in turn superseded by SMB3 in Microsoft Windows 8™ and Microsoft Windows Server 2012. In recent versions of Samba, SMB1 is disabled by default for security reasons.

NetBIOS

NetBIOS is a software interface (API) designed for name resolution and communication between computers on a network. It enables machines connected to the network to reserve names for themselves. After reservation, these machines can be addressed by name. There is no central process that checks names. Any machine on the network can reserve as many names as it wants, as long as the names are not already in use. NetBIOS can be implemented on top of different network protocols. One relatively simple, non-routable implementation is called NetBEUI. (This is often confused with the NetBIOS API.) NetBIOS is also supported on top of the Novell IPX/SPX protocol. Since version 3.2, Samba supports NetBIOS over both IPv4 and IPv6.

The NetBIOS names sent via TCP/IP have nothing in common with the names used in /etc/hosts or those defined by DNS. NetBIOS uses its own, completely independent naming convention. However, it is recommended to use names that correspond to DNS host names, to make administration easier, or to use DNS natively. This is the default used by Samba.

Samba server

Samba server provides SMB/CIFS services and NetBIOS over IP naming services to clients. For Linux, there are three daemons for the Samba server: smbd for SMB/CIFS services, nmbd for naming services, and winbind for authentication.

Samba client

The Samba client is a system that uses Samba services from a Samba server over the SMB protocol. Common operating systems, such as Windows and macOS, support the SMB protocol. The TCP/IP protocol must be installed on all computers. Samba provides a client for the different Unix flavors. For Linux, there is a kernel module for SMB that allows the integration of SMB resources on the Linux system level. You do not need to run any daemon for the Samba client.

Shares

SMB servers provide resources to the clients by means of shares. Shares are directories (including their subdirectories) and printers on the server. A share is exported by means of a share name, and can be accessed by this name. The share name can be set to any name—it does not need to be the name of the export directory. Shared printers are also assigned names. Clients can access shared directories and printers by their names.

By convention, share names ending with a dollar symbol ($) are hidden; that is, when using a Windows computer to browse available shares, they will not be displayed.

DC

A domain controller (DC) is a server that handles accounts in a domain. For data replication, it is possible to have multiple domain controllers in a single domain.

21.2 Installing a Samba server Edit source

To install a Samba server, start YaST and select Software › Software Management. Choose View › Patterns and select File Server. Confirm the installation of the required packages to finish the installation process.

21.3 Starting and stopping Samba Edit source

You can start or stop the Samba server automatically (during boot) or manually. The starting and stopping policy is a part of the YaST Samba server configuration described in Section 21.4.1, “Configuring a Samba server with YaST”.

From a command line, stop services required for Samba with systemctl stop smb nmb and start them with systemctl start nmb smb. The smb service cares about winbind if needed.

Tip
Tip: winbind

winbind is an independent service, and as such is also offered as an individual samba-winbind package.

21.4 Configuring a Samba server Edit source

A Samba server in openSUSE® Leap can be configured in two different ways: with YaST or manually. Manual configuration offers a higher level of detail, but lacks the convenience of the YaST GUI.

21.4.1 Configuring a Samba server with YaST Edit source

To configure a Samba server, start YaST and select Network Services › Samba Server.

21.4.1.1 Initial Samba configuration Edit source

When starting the module for the first time, the Samba Installation dialog starts, prompting you to make a few basic decisions concerning administration of the server. At the end of the configuration, it prompts for the Samba administrator password (Samba Root Password). For later starts, the Samba Configuration dialog appears.

The Samba Installation dialog consists of two steps and optional detailed settings:

Workgroup or domain name

Select an existing name from Workgroup or Domain Name or enter a new one and click Next.

Samba server type

In the next step, specify whether your server should act as a primary domain controller (PDC), backup domain controller (BDC), or not act as a domain controller. Continue with Next.

If you do not want to proceed with a detailed server configuration, confirm with OK. Then in the final pop-up box, set the Samba root Password.

You can change all settings later in the Samba Configuration dialog with the Start-Up, Shares, Identity, Trusted Domains, and LDAP Settings tabs.

21.4.1.2 Enabling current versions of the SMB protocol on the server Edit source

On clients running current versions of openSUSE Leap or other recent Linux versions, the insecure SMB1/CIFS protocol is disabled by default. However, existing instances of Samba may be configured to only serve shares using the SMB1/CIFS version of the protocol. To interact with such clients, you need to configure Samba to serve shares using at least the SMB 2.1 protocol.

There are setups in which only SMB1 can be used—for example, because they rely on SMB1's/CIFS's Unix extensions. These extensions have not been ported to newer protocol versions. If you are in this situation, consider changing your setup or see Section 21.5.2, “Mounting SMB1/CIFS shares on clients”.

To do so, in the configuration file /etc/samba/smb.conf, set the global parameter server max protocol = SMB2_10. For a list of all possible values, see man smb.conf.

21.4.1.3 Advanced Samba configuration Edit source

During the first start of the Samba server module, the Samba Configuration dialog appears directly after the two initial steps described in Section 21.4.1.1, “Initial Samba configuration”. Use it to adjust your Samba server configuration.

After editing your configuration, click OK to save your settings.

21.4.1.3.1 Starting the server Edit source

In the Start Up tab, configure the start of the Samba server. To start the service every time your system boots, select During Boot. To activate manual start, choose Manually. More information about starting a Samba server is provided in Section 21.3, “Starting and stopping Samba”.

In this tab, you can also open ports in your firewall. To do so, select Open Port in Firewall. If you have multiple network interfaces, select the network interface for Samba services by clicking Firewall Details, selecting the interfaces, and clicking OK.

21.4.1.3.2 Shares Edit source

In the Shares tab, determine the Samba shares to activate. There are some predefined shares, like homes and printers. Use Toggle Status to switch between Active and Inactive. Click Add to add new shares and Delete to delete the selected share.

Allow Users to Share Their Directories enables members of the group in Permitted Group to share directories they own with other users. For example, users for a local scope or DOMAIN\Users for a domain scope. The user also must make sure that the file system permissions allow access. With Maximum Number of Shares, limit the total amount of shares that may be created. To permit access to user shares without authentication, enable Allow Guest Access.

21.4.1.3.3 Identity Edit source

In the Identity tab, you can determine the domain with which the host is associated (Base Settings) and whether to use an alternative host name in the network (NetBIOS Hostname). It is also possible to use Microsoft Windows Internet Name Service (WINS) for name resolution. In this case, activate Use WINS for Hostname Resolution and decide whether to Retrieve WINS server via DHCP. To set expert global settings or set a user authentication source, for example LDAP instead of TDB database, click Advanced Settings.

21.4.1.3.4 Trusted domains Edit source

To enable users from other domains to access your domain, make the appropriate settings in the Trusted Domains tab. To add a new domain, click Add. To remove the selected domain, click Delete.

21.4.1.3.5 LDAP settings Edit source

In the tab LDAP Settings, you can determine the LDAP server to use for authentication. To test the connection to your LDAP server, click Test Connection. To set expert LDAP settings or use default values, click Advanced Settings.

For more information about LDAP configuration, see Book “Security and Hardening Guide”, Chapter 5 “LDAP with 389 Directory Server”.

21.4.2 Configuring the server manually Edit source

If you intend to use Samba as a server, install samba. The main configuration file for Samba is /etc/samba/smb.conf. This file can be divided into two logical parts. The [global] section contains the central and global settings. The following default sections contain the individual file and printer shares:

  • [homes]

  • [profiles]

  • [users]

  • [groups]

  • [printers]

  • [print$]

Using this approach, options of the shares can be set differently or globally in the [global] section, which makes the configuration file easier to understand.

21.4.2.1 The global section Edit source

The following parameters of the [global] section should be modified to match the requirements of your network setup, so other machines can access your Samba server via SMB in a Windows environment.

workgroup = WORKGROUP

This line assigns the Samba server to a work group. Replace WORKGROUP with an appropriate work group of your networking environment. Your Samba server appears under its DNS name unless this name has been assigned to some other machine in the network. If the DNS name is not available, set the server name using netbiosname=MYNAME. For more details about this parameter, see the smb.conf man page.

os level = 20

This parameter triggers whether your Samba server tries to become LMB (local master browser) for its work group. Choose a very low value such as 2 to spare the existing Windows network from any interruptions caused by a misconfigured Samba server. More information about this topic can be found in the Network Browsing chapter of the Samba 3 Howto; for more information on the Samba 3 Howto, see Section 21.9, “More information”.

If no other SMB server is in your network (such as a Windows 2000 server) and you want the Samba server to keep a list of all systems present in the local environment, set the os level to a higher value (for example, 65). Your Samba server is then chosen as LMB for your local network.

When changing this setting, consider carefully how this could affect an existing Windows network environment. First test the changes in an isolated network or at a noncritical time of day.

wins support and wins server

To integrate your Samba server into an existing Windows network with an active WINS server, enable the wins server option and set its value to the IP address of that WINS server.

If your Windows machines are connected to separate subnets and need to still be aware of each other, you need to set up a WINS server. To turn a Samba server into such a WINS server, set the option wins support = Yes. Make sure that only one Samba server of the network has this setting enabled. The options wins server and wins support must never be enabled at the same time in your smb.conf file.

21.4.2.2 Shares Edit source

The following examples illustrate how a CD-ROM drive and the user directories (homes) are made available to the SMB clients.

[cdrom]

To avoid having the CD-ROM drive accidentally made available, these lines are deactivated with comment marks (semicolons in this case). Remove the semicolons in the first column to share the CD-ROM drive with Samba.

Example 21.1: A CD-ROM share
[cdrom]
       comment = Linux CD-ROM
       path = /media/cdrom
       locking = No
[cdrom] and comment

The [cdrom] section entry is the name of the share that can be seen by all SMB clients on the network. An additional comment can be added to further describe the share.

path = /media/cdrom

path exports the directory /media/cdrom.

By means of a very restrictive default configuration, this kind of share is only made available to the users present on this system. If this share should be made available to everybody, add a line guest ok = yes to the configuration. This setting gives read permissions to anyone on the network. It is recommended to handle this parameter with great care. This applies even more to the use of this parameter in the [global] section.

[homes]

The [homes] share is of special importance here. If the user has a valid account and password for the Linux file server and their own home directory, they can be connected to it.

Example 21.2: [homes] share
[homes]
        comment = Home Directories
        valid users = %S
        browseable = No
        read only = No
        inherit acls = Yes
[homes]

As long as there is no other share using the share name of the user connecting to the SMB server, a share is dynamically generated using the [homes] share directives. The resulting name of the share is the user name.

valid users = %S

%S is replaced with the concrete name of the share when a connection has been successfully established. For a [homes] share, this is always the user name. As a consequence, access rights to a user's share are restricted exclusively to that user.

browseable = No

This setting makes the share invisible in the network environment.

read only = No

By default, Samba prohibits write access to any exported share by means of the read only = Yes parameter. To make a share writable, set the value read only = No, which is synonymous with writable = Yes.

create mask = 0640

Systems that are not based on MS Windows NT do not understand the concept of Unix permissions, so they cannot assign permissions when creating a file. The parameter create mask defines the access permissions assigned to newly created files. This only applies to writable shares. In effect, this setting means the owner has read and write permissions and the members of the owner's primary group have read permissions. valid users = %S prevents read access even if the group has read permissions. For the group to have read or write access, deactivate the line valid users = %S.

Warning
Warning: Do not share NFS mounts with Samba

Sharing NFS mounts with Samba may result in data loss and is not supported. Install Samba directly on the file server or consider using alternatives such as iSCSI.

21.4.2.3 Security levels Edit source

To improve security, each share access can be protected with a password. SMB offers the following ways of checking permissions:

User level security (security = user)

This variant introduces the concept of the user to SMB. Each user must register with the server with their own password. After registration, the server can grant access to individual exported shares dependent on user names.

ADS level security (security = ADS)

In this mode, Samba will act as a domain member in an Active Directory environment. To operate in this mode, the machine running Samba needs Kerberos installed and configured. You must join the machine using Samba to the ADS realm. This can be done using the YaST Windows Domain Membership module.

Domain level security (security = domain)

This mode will only work correctly if the machine has been joined to a Windows NT domain. Samba will try to validate the user name and password by passing it to a Windows Primary or Backup Domain Controller, the same way as a Windows Server would do. It expects the encrypted passwords parameter to be set to yes.

The selection of share, user, server, or domain level security applies to the entire server. It is not possible to offer individual shares of a server configuration with share level security and others with user level security. However, you can run a separate Samba server for each configured IP address on a system.

More information about this subject can be found in the Samba 3 HOWTO. For multiple servers on one system, pay attention to the options interfaces and bind interfaces only.

21.5 Configuring clients Edit source

Clients can only access the Samba server via TCP/IP. NetBEUI and NetBIOS via IPX cannot be used with Samba.

21.5.1 Configuring a Samba client with YaST Edit source

Configure a Samba client to access resources (files or printers) on the Samba or Windows server. Enter the Windows or Active Directory domain or workgroup in the dialog Network Services › Windows Domain Membership. If you activate Also Use SMB Information for Linux Authentication, the user authentication runs over the Samba, Windows, or Kerberos server.

Click Expert Settings for advanced configuration options. For example, use the Mount Server Directories table to enable mounting server home directory automatically with authentication. This way users can access their home directories when hosted on CIFS. For details, see the pam_mount man page.

After completing all settings, confirm the dialog to finish the configuration.

21.5.2 Mounting SMB1/CIFS shares on clients Edit source

The first version of the SMB network protocol, SMB1 or CIFS, is an old and insecure protocol, which has been deprecated by its originator Microsoft. For security reasons, the mount command on openSUSE Leap will only mount SMB shares using newer protocol versions by default, namely SMB 2.1, SMB 3.0, or SMB 3.02.

However, this change only affects mount and mounting via /etc/fstab. SMB1 is still available by explicitly requiring it. Use the following:

  • The smbclient tool.

  • The Samba server software shipped with openSUSE.

There are setups in which this default setting will lead to connection failures, because only SMB1 can be used:

  • Setups using an SMB server that does not support newer SMB protocol versions. Windows has offered SMB 2.1 support since Windows 7 and Windows Server 2008.

  • Setups that rely on SMB1's/CIFS's Unix extensions. These extensions have not been ported to newer protocol versions.

Important
Important: Decreased system security

Following the instruction below makes it possible to exploit security issues. For more information about the issues, see https://blogs.technet.microsoft.com/filecab/2016/09/16/stop-using-smb1/.

As soon as possible, upgrade your server to allow for a more secure SMB version.

For information about enabling suitable protocol versions on openSUSE Leap, see Section 21.4.1.2, “Enabling current versions of the SMB protocol on the server”.

If you need to enable SMB1 shares on the current openSUSE Leap kernel, add the option vers=1.0 to the mount command line you use:

# mount -t cifs //HOST/SHARE /MOUNT_POINT –o username=USER_ID,vers=1.0

Alternatively, you can enable SMB1 shares globally within your openSUSE Leap installation. To do so, add the following to /etc/samba/smb.conf under the section [global]:

        client min protocol = CORE

21.6 Samba as login server Edit source

In business settings, it is often desirable to allow access only to users registered on a central instance. In a Windows-based network, this task is handled by a primary domain controller (PDC). You can use a Windows Server configured as PDC, but this task can also be done with a Samba server. The entries that must be made in the [global] section of smb.conf are shown in Example 21.3, “Global section in smb.conf”.

Example 21.3: Global section in smb.conf
[global]
    workgroup = WORKGROUP
    domain logons = Yes
    domain master = Yes

It is necessary to prepare user accounts and passwords in an encryption format that conforms with Windows. Do this with the command smbpasswd -a name. Create the domain account for the computers, required by the Windows domain concept, with the following commands:

useradd hostname
smbpasswd -a -m hostname

With the useradd command, a dollar sign is added. The command smbpasswd inserts this automatically when the parameter -m is used. The commented configuration example (/usr/share/doc/packages/samba/examples/smb.conf.SUSE) contains settings that automate this task.

add machine script = /usr/sbin/useradd -g nogroup -c "NT Machine Account" \
-s /bin/false %m

To make sure that Samba can execute this script correctly, choose a Samba user with the required administrator permissions and add it to the ntadmin group. Then all users belonging to this Linux group can be assigned Domain Admin status with the command:

net groupmap add ntgroup="Domain Admins" unixgroup=ntadmin

21.7 Samba server in the network with Active Directory Edit source

If you run Linux servers and Windows servers together, you can build two independent authentication systems and networks or connect servers to one network with one central authentication system. Because Samba can cooperate with an Active Directory domain, you can join your openSUSE Leap server with an Active Directory (AD) domain.

To join an AD domain proceed as follows:

  1. Log in as root and start YaST.

  2. Start Network Services › Windows Domain Membership.

  3. Enter the domain to join in the Domain or Workgroup field in the Windows Domain Membership screen.

    Determining Windows domain membership
    Figure 21.1: Determining Windows domain membership
  4. Check Also Use SMB Information for Linux Authentication to use the SMB source for Linux authentication on your server.

  5. Click OK and confirm the domain join when prompted for it.

  6. Provide the password for the Windows Administrator on the AD server and click OK.

    Your server is now set up to pull in all authentication data from the Active Directory domain controller.

Tip
Tip: Identity mapping

In an environment with more than one Samba server, UIDs and GIDs will not be created consistently. The UIDs that get assigned to users will be dependent on the order in which they first log in, which results in UID conflicts across servers. To fix this, you need to use identity mapping. See https://www.samba.org/samba/docs/man/Samba-HOWTO-Collection/idmapper.html for more details.

21.8 Advanced topics Edit source

This section introduces more advanced techniques to manage both the client and server parts of the Samba suite.

21.8.1 Automounting CIFS file system using systemd Edit source

You can use systemd to mount CIFS shares on startup. To do so, proceed as described further:

  1. Create the mount points:

    > mkdir -p PATH_SERVER_SHARED_FOLDER

    where PATH_SERVER_SHARED_FOLDER is /cifs/shared in further steps.

  2. Create the systemd unit file and generate a file name from the path specified in the previous step where "/" are replaced with "-", for example:

    > sudo touch /etc/systemd/system/cifs-shared.mount

    with the following content:

    [Unit]
    Description=CIFS share from The-Server
    
    [Mount]
    What=//The-Server/Shared-Folder
    Where=/cifs/shared
    Type=cifs
    Options=rw,username=vagrant,password=admin
    
    [Install]
    WantedBy=multi-user.target
  3. Enable the service:

    > sudo systemctl enable cifs-shared.mount
  4. Start the service:

    > sudo systemctl start cifs-shared.mount

    To verify that the service is running, run the command:

    > sudo systemctl status cifs-shared.mount
  5. To confirm that the CIFS shared path is available, try the following command:

    >  cd /cifs/shared
    > ls -l
    
    total 0
    -rwxrwxrwx. 1 root    root    0 Oct 24 22:31 hello-world-cifs.txt
    drwxrwxrwx. 2 root    root    0 Oct 24 22:31 subfolder
    -rw-r--r--. 1 vagrant vagrant 0 Oct 28 21:51 testfile.txt

21.8.2 Transparent file compression on Btrfs Edit source

Samba allows clients to remotely manipulate file and directory compression flags for shares placed on the Btrfs file system. Windows Explorer provides the ability to flag files/directories for transparent compression via the File › Properties › Advanced dialog:

Windows Explorer Advanced Attributes dialog
Figure 21.2: Windows Explorer Advanced Attributes dialog

Files flagged for compression are transparently compressed and decompressed by the underlying file system when accessed or modified. This normally results in storage capacity savings at the expense of extra CPU overhead when accessing the file. New files and directories inherit the compression flag from the parent directory, unless created with the FILE_NO_COMPRESSION option.

Windows Explorer presents compressed files and directories visually differently to those that are not compressed:

Windows Explorer directory listing with compressed files
Figure 21.3: Windows Explorer directory listing with compressed files

You can enable Samba share compression either manually by adding

vfs objects = btrfs

to the share configuration in /etc/samba/smb.conf, or using YaST: Network Services › Samba Server › Add, and checking Utilize Btrfs Features.

21.8.3 Snapshots Edit source

Snapshots, also called Shadow Copies, are copies of the state of a file system subvolume at a certain point in time. Snapper is the tool to manage these snapshots in Linux. Snapshots are supported on the Btrfs file system or thinly provisioned LVM volumes. The Samba suite supports managing remote snapshots through the FSRVP protocol on both the server and client side.

21.8.3.1 Previous versions Edit source

Snapshots on a Samba server can be exposed to remote Windows clients as previous versions of files or directories.

To enable snapshots on a Samba server, the following conditions must be fulfilled:

  • The SMB network share resides on a Btrfs subvolume.

  • The SMB network share path has a related Snapper configuration file. You can create the snapper file with

    > sudo snapper -c <cfg_name> create-config /path/to/share

    For more information on Snapper, see Chapter 3, System recovery and snapshot management with Snapper.

  • The snapshot directory tree must allow access for relevant users. For more information, see the PERMISSIONS section of the vfs_snapper manual page (man 8 vfs_snapper).

To support remote snapshots, you need to modify the /etc/samba/smb.conf file. You can do this either with YaST › Network Services › Samba Server, or manually by enhancing the relevant share section with

vfs objects = snapper

Note that you need to restart the Samba service for manual changes to smb.conf to take effect:

> sudo systemctl restart nmb smb
Adding a new Samba share with snapshots enabled
Figure 21.4: Adding a new Samba share with snapshots enabled

After being configured, snapshots created by Snapper for the Samba share path can be accessed from Windows Explorer from a file or directory's Previous Versions tab.

The Previous versions tab in Windows explorer
Figure 21.5: The Previous versions tab in Windows explorer

21.8.3.2 Remote share snapshots Edit source

By default, snapshots can only be created and deleted on the Samba server locally, via the Snapper command line utility, or using Snapper's timeline feature.

Samba can be configured to process share snapshot creation and deletion requests from remote hosts using the File Server Remote VSS Protocol (FSRVP).

In addition to the configuration and prerequisites documented in Section 21.8.3.1, “Previous versions”, the following global configuration is required in /etc/samba/smb.conf:

[global]
rpc_daemon:fssd = fork
registry shares = yes
include = registry

FSRVP clients, including Samba's rpcclient and Windows Server 2012 DiskShadow.exe, can then instruct Samba to create or delete a snapshot for a given share, and expose the snapshot as a new share.

21.8.3.3 Managing snapshots remotely from Linux with rpcclient Edit source

The samba-client package contains an FSRVP client that can remotely request a Windows/Samba server to create and expose a snapshot of a given share. You can then use existing tools in openSUSE Leap to mount the exposed share and back up its files. Requests to the server are sent using the rpcclient binary.

Example 21.4: Using rpcclient to request a Windows server 2012 share snapshot

Connect to win-server.example.com server as an administrator in an EXAMPLE domain:

# rpcclient -U 'EXAMPLE\Administrator' ncacn_np:win-server.example.com[ndr64,sign]
Enter EXAMPLE/Administrator's password:

Check that the SMB share is visible for rpcclient:

# rpcclient $> netshareenum
netname: windows_server_2012_share
remark:
path:   C:\Shares\windows_server_2012_share
password:       (null)

Check that the SMB share supports snapshot creation:

# rpcclient $> fss_is_path_sup windows_server_2012_share \
UNC \\WIN-SERVER\windows_server_2012_share\ supports shadow copy requests

Request the creation of a share snapshot:

# rpcclient $> fss_create_expose backup ro windows_server_2012_share
13fe880e-e232-493d-87e9-402f21019fb6: shadow-copy set created
13fe880e-e232-493d-87e9-402f21019fb6(1c26544e-8251-445f-be89-d1e0a3938777): \
\\WIN-SERVER\windows_server_2012_share\ shadow-copy added to set
13fe880e-e232-493d-87e9-402f21019fb6: prepare completed in 0 secs
13fe880e-e232-493d-87e9-402f21019fb6: commit completed in 1 secs
13fe880e-e232-493d-87e9-402f21019fb6(1c26544e-8251-445f-be89-d1e0a3938777): \
share windows_server_2012_share@{1C26544E-8251-445F-BE89-D1E0A3938777} \
exposed as a snapshot of \\WIN-SERVER\windows_server_2012_share\

Confirm that the snapshot share is exposed by the server:

# rpcclient $> netshareenum
netname: windows_server_2012_share
remark:
path:   C:\Shares\windows_server_2012_share
password:       (null)

netname: windows_server_2012_share@{1C26544E-8251-445F-BE89-D1E0A3938777}
remark: (null)
path:   \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy{F6E6507E-F537-11E3-9404-B8AC6F927453}\Shares\windows_server_2012_share\
password:       (null)

Attempt to delete the snapshot share:

# rpcclient $> fss_delete windows_server_2012_share \
13fe880e-e232-493d-87e9-402f21019fb6 1c26544e-8251-445f-be89-d1e0a3938777
13fe880e-e232-493d-87e9-402f21019fb6(1c26544e-8251-445f-be89-d1e0a3938777): \
\\WIN-SERVER\windows_server_2012_share\ shadow-copy deleted

Confirm that the snapshot share has been removed by the server:

# rpcclient $> netshareenum
netname: windows_server_2012_share
remark:
path:   C:\Shares\windows_server_2012_share
password:       (null)

21.8.3.4 Managing snapshots remotely from Windows with DiskShadow.exe Edit source

You can manage snapshots of SMB shares on the Linux Samba server from Windows clients as well. Windows Server 2012 includes the DiskShadow.exe utility which can manage remote shares similarly to the rpcclient command described in Section 21.8.3.3, “Managing snapshots remotely from Linux with rpcclient. Note that you need to carefully set up the Samba server first.

The following is an example procedure to set up the Samba server so that the Windows client can manage its shares' snapshots. Note that EXAMPLE is the Active Directory domain used in the testing environment, fsrvp-server.example.com is the host name of the Samba server, and /srv/smb is the path to the SMB share.

Procedure 21.1: Detailed Samba server configuration
  1. Join Active Directory domain via YaST. For more information, see Section 21.7, “Samba server in the network with Active Directory”.

  2. Ensure that the Active Directory domain's DNS entry is correct:

    fsrvp-server:~ # net -U 'Administrator' ads dns register \
    fsrvp-server.example.com <IP address>
    Successfully registered hostname with DNS
  3. Create Btrfs subvolume at /srv/smb

    fsrvp-server:~ # btrfs subvolume create /srv/smb
  4. Create a Snapper configuration file for the path /srv/smb:

    fsrvp-server:~ # snapper -c <snapper_config> create-config /srv/smb
  5. Create a new share with path /srv/smb, and the YaST Expose Snapshots check box enabled. Make sure to add the following snippets to the global section of /etc/samba/smb.conf, as mentioned in Section 21.8.3.2, “Remote share snapshots”:

    [global]
     rpc_daemon:fssd = fork
     registry shares = yes
     include = registry
  6. Restart Samba with systemctl restart nmb smb

  7. Configure Snapper permissions:

    fsrvp-server:~ # snapper -c <snapper_config> set-config \
    ALLOW_USERS="EXAMPLE\\\\Administrator EXAMPLE\\\\win-client$"

    Ensure that any instances of ALLOW_USERS are also permitted access to the .snapshots subdirectory.

    fsrvp-server:~ # snapper -c <snapper_config> set-config SYNC_ACL=yes
    Important
    Important: Path escaping

    Be careful about the '\' escapes! Escape twice to ensure that the value stored in /etc/snapper/configs/<snapper_config> is escaped once.

    "EXAMPLE\win-client$" corresponds to the Windows client computer account. Windows issues initial FSRVP requests while authenticated with this account.

  8. Grant Windows client account necessary privileges:

    fsrvp-server:~ # net -U 'Administrator' rpc rights grant \
    "EXAMPLE\\win-client$" SeBackupPrivilege
    Successfully granted rights.

    The previous command is not needed for the "EXAMPLE\Administrator" user, which has privileges already granted.

Procedure 21.2: Windows client setup and DiskShadow.exe in action
  1. Boot Windows Server 2012 (example host name WIN-CLIENT).

  2. Join the same Active Directory domain EXAMPLE as with the openSUSE Leap.

  3. Reboot.

  4. Open Powershell.

  5. Start DiskShadow.exe and begin the backup procedure:

    PS C:\Users\Administrator.EXAMPLE> diskshadow.exe
    Microsoft DiskShadow version 1.0
    Copyright (C) 2012 Microsoft Corporation
    On computer:  WIN-CLIENT,  6/17/2014 3:53:54 PM
    
    DISKSHADOW> begin backup
  6. Specify that shadow copies persist across program exits, resets, and reboots:

    DISKSHADOW> set context PERSISTENT
  7. Check whether the specified share supports snapshots, and create one:

    DISKSHADOW> add volume \\fsrvp-server\sles_snapper
    
    DISKSHADOW> create
    Alias VSS_SHADOW_1 for shadow ID {de4ddca4-4978-4805-8776-cdf82d190a4a} set as \
     environment variable.
    Alias VSS_SHADOW_SET for shadow set ID {c58e1452-c554-400e-a266-d11d5c837cb1} \
     set as environment variable.
    
    Querying all shadow copies with the shadow copy set ID \
     {c58e1452-c554-400e-a266-d11d5c837cb1}
    
     * Shadow copy ID = {de4ddca4-4978-4805-8776-cdf82d190a4a}     %VSS_SHADOW_1%
        - Shadow copy set: {c58e1452-c554-400e-a266-d11d5c837cb1}  %VSS_SHADOW_SET%
        - Original count of shadow copies = 1
        - Original volume name: \\FSRVP-SERVER\SLES_SNAPPER\ \
          [volume not on this machine]
        - Creation time: 6/17/2014 3:54:43 PM
        - Shadow copy device name:
          \\FSRVP-SERVER\SLES_SNAPPER@{31afd84a-44a7-41be-b9b0-751898756faa}
        - Originating machine: FSRVP-SERVER
        - Service machine: win-client.example.com
        - Not exposed
        - Provider ID: {89300202-3cec-4981-9171-19f59559e0f2}
        - Attributes:  No_Auto_Release Persistent FileShare
    
    Number of shadow copies listed: 1
  8. Finish the backup procedure:

    DISKSHADOW> end backup
  9. After the snapshot was created, try to delete it and verify the deletion:

    DISKSHADOW> delete shadows volume \\FSRVP-SERVER\SLES_SNAPPER\
    Deleting shadow copy {de4ddca4-4978-4805-8776-cdf82d190a4a} on volume \
     \\FSRVP-SERVER\SLES_SNAPPER\ from provider \
    {89300202-3cec-4981-9171-19f59559e0f2} [Attributes: 0x04000009]...
    
    Number of shadow copies deleted: 1
    
    DISKSHADOW> list shadows all
    
    Querying all shadow copies on the computer ...
    No shadow copies found in system.

21.9 More information Edit source

  • Man pages:  To see a list of all man pages installed with the package samba, run apropos samba. Open any of the man pages with man NAME_OF_MAN_PAGE.

  • SUSE-specific README file:  The package samba-client contains the file /usr/share/doc/packages/samba/README.SUSE.

  • Additional package documentation:  Install the package samba-doc with zypper install samba-doc.

    This documentation installs into /usr/share/doc/packages/samba. It contains an HTML version of the man pages and a library of example configurations (such as smb.conf.SUSE).

  • Online documentation:  The Samba wiki contains extensive User Documentation at https://wiki.samba.org/index.php/User_Documentation.

22 Sharing file systems with NFS Edit source

Abstract

The Network File System (NFS) is a protocol that allows access to files on a server in a manner similar to accessing local files.

openSUSE Leap installs NFS v4.2, which introduces support for sparse files, file pre-allocation, server-side clone and copy, application data block (ADB), and labeled NFS for mandatory access control (MAC) (requires MAC on both client and server).

22.1 Overview Edit source

The Network File System (NFS) is a standardized, well-proven and widely supported network protocol that allows sharing files between separate hosts.

The Network Information Service (NIS) can be used to have centralized user management in the network. Combining NFS and NIS allows using file and directory permissions for access control in the network. NFS with NIS makes a network transparent to the user.

In the default configuration, NFS completely trusts the network and thus any machine that is connected to a trusted network. Any user with administrator privileges on any computer with physical access to any network the NFS server trusts can access any files that the server makes available.

Often, this level of security is perfectly satisfactory, such as when the network that is trusted is truly private, often localized to a single cabinet or machine room, and no unauthorized access is possible. In other cases, the need to trust a whole subnet as a unit is restrictive, and there is a need for more fine-grained trust. To meet the need in these cases, NFS supports various security levels using the Kerberos infrastructure. Kerberos requires NFSv4, which is used by default. For details, see Book “Security and Hardening Guide”, Chapter 6 “Network authentication with Kerberos”.

The following are terms used in the YaST module.

Exports

A directory exported by an NFS server, which clients can integrate into their systems.

NFS client

The NFS client is a system that uses NFS services from an NFS server over the Network File System protocol. The TCP/IP protocol is already integrated into the Linux kernel; there is no need to install any additional software.

NFS server

The NFS server provides NFS services to clients. A running server depends on the following daemons: nfsd (worker), idmapd (ID-to-name mapping for NFSv4, needed for certain scenarios only), statd (file locking), and mountd (mount requests).

NFSv3

NFSv3 is the version 3 implementation, the old stateless NFS that supports client authentication.

NFSv4

NFSv4 is the new version 4 implementation that supports secure user authentication via Kerberos. NFSv4 requires one single port only and thus is better suited for environments behind a firewall than NFSv3.

The protocol is specified as https://datatracker.ietf.org/doc/html/rfc3530.

pNFS

Parallel NFS, a protocol extension of NFSv4. Any pNFS clients can directly access the data on an NFS server.

Important
Important: Need for DNS

In principle, all exports can be made using IP addresses only. To avoid timeouts, you need a working DNS system. DNS is necessary at least for logging purposes, because the mountd daemon does reverse lookups.

22.2 Installing NFS server Edit source

The NFS server is not part of the default installation. To install the NFS server using YaST, choose Software › Software Management, select Patterns, and enable the File Server option in the Server Functions section. Click Accept to install the required packages.

Like NIS, NFS is a client/server system. However, a machine can be both—it can supply file systems over the network (export) and mount file systems from other hosts (import).

Note
Note: Mounting NFS volumes locally on the exporting server

Mounting NFS volumes locally on the exporting server is not supported on openSUSE Leap.

22.3 Configuring NFS server Edit source

Configuring an NFS server can be done either through YaST or manually. For authentication, NFS can also be combined with Kerberos.

22.3.1 Exporting file systems with YaST Edit source

With YaST, turn a host in your network into an NFS server—a server that exports directories and files to all hosts granted access to it or to all members of a group. Thus, the server can also provide applications without installing the applications locally on every host.

To set up such a server, proceed as follows:

Procedure 22.1: Setting up an NFS server
  1. Start YaST and select Network Services › NFS Server; see Figure 22.1, “NFS server configuration tool”. You may be prompted to install additional software.

    NFS server configuration tool
    Figure 22.1: NFS server configuration tool
  2. Click the Start radio button.

  3. If firewalld is active on your system, configure it separately for NFS (see Book “Security and Hardening Guide”, Chapter 23 “Masquerading and firewalls”, Section 23.4 “firewalld). YaST does not yet have complete support for firewalld, so ignore the "Firewall not configurable" message and continue.

    When configuring firewalld rules, add the nfs3 or nfs service with the port value of 2049 for both TCP and UDP. Also add the mountd service with the port value of 20048 for both TCP and UDP.

  4. Check whether you want to Enable NFSv4. If you deactivate NFSv4, YaST will only support NFSv3. For information about enabling NFSv2, see Note: NFSv2.

    1. If NFSv4 is selected, additionally enter the appropriate NFSv4 domain name. This parameter is used by the idmapd daemon that is required for Kerberos setups or if clients cannot work with numeric user names. Leave it as localdomain (the default) if you do not run idmapd or do not have any special requirements. For more information on the idmapd daemon, see /etc/idmapd.conf.

  5. Click Enable GSS Security if you need secure access to the server. A prerequisite for this is to have Kerberos installed on your domain and to have both the server and the clients kerberized. Click Next to proceed with the next configuration dialog.

  6. Click Add Directory in the upper half of the dialog to export your directory.

  7. If you have not configured the allowed hosts already, another dialog for entering the client information and options pops up automatically. Enter the host wild card (usually you can leave the default settings as they are).

    There are four possible types of host wild cards that can be set for each host: a single host (name or IP address), netgroups, wild cards (such as * indicating all machines can access the server), and IP networks.

    For more information about these options, see the exports man page.

  8. Click Finish to complete the configuration.

22.3.2 Exporting file systems manually Edit source

The configuration files for the NFS export service are /etc/exports and /etc/sysconfig/nfs. In addition to these files, /etc/idmapd.conf is needed for the NFSv4 server configuration with kerberized NFS or if the clients cannot work with numeric user names.

To start or restart the services, run the command systemctl restart nfsserver. This also restarts the RPC port mapper that is required by the NFS server.

To make sure the NFS server always starts at boot time, run sudo systemctl enable nfsserver.

Note
Note: NFSv4

NFSv4 is the latest version of the NFS protocol available on openSUSE Leap. Configuring directories for export with NFSv4 is now the same as with NFSv3.

On openSUSE prior to Leap, the bind mount in /etc/exports was mandatory. It is still supported, but now deprecated.

/etc/exports

The /etc/exports file contains a list of entries. Each entry indicates a directory that is shared and how it is shared. A typical entry in /etc/exports consists of:

/SHARED/DIRECTORY   HOST(OPTION_LIST)

For example:

/export/data   192.168.1.2(rw,sync)

Here the IP address 192.168.1.2 is used to identify the allowed client. You can also use the name of the host, a wild card indicating a set of hosts (*.abc.com, *, etc.), or netgroups (@my-hosts).

For a detailed explanation of all options and their meanings, refer to the man page of /etc/exports: (man exports).

In case you have modified /etc/exports while the NFS server was running, you need to restart it for the changes to become active: sudo systemctl restart nfsserver.

/etc/sysconfig/nfs

The /etc/sysconfig/nfs file contains a few parameters that determine NFSv4 server daemon behavior. It is important to set the parameter NFS4_SUPPORT to yes (default). NFS4_SUPPORT determines whether the NFS server supports NFSv4 exports and clients.

In case you have modified /etc/sysconfig/nfs while the NFS server was running, you need to restart it for the changes to become active: sudo systemctl restart nfsserver.

Tip
Tip: Mount options

On openSUSE prior to Leap, the --bind mount in /etc/exports was mandatory. It is still supported, but now deprecated. Configuring directories for export with NFSv4 is now the same as with NFSv3.

Note
Note: NFSv2

If NFS clients still depend on NFSv2, enable it on the server in /etc/sysconfig/nfs by setting:

NFSD_OPTIONS="-V2"
MOUNTD_OPTIONS="-V2"

After restarting the service, check whether version 2 is available with the command:

> cat /proc/fs/nfsd/versions
+2 +3 +4 +4.1 +4.2
/etc/idmapd.conf

The idmapd daemon is only required if Kerberos authentication is used or if clients cannot work with numeric user names. Linux clients can work with numeric user names since Linux kernel 2.6.39. The idmapd daemon does the name-to-ID mapping for NFSv4 requests to the server and replies to the client.

If required, idmapd needs to run on the NFSv4 server. Name-to-ID mapping on the client will be done by nfsidmap provided by the package nfs-client.

Make sure that there is a uniform way in which user names and IDs (UIDs) are assigned to users across machines that might be sharing file systems using NFS. This can be achieved by using NIS, LDAP, or any uniform domain authentication mechanism in your domain.

The parameter Domain must be set the same for both client and server in the /etc/idmapd.conf file. If you are not sure, leave the domain as localdomain in the server and client files. A sample configuration file looks like the following:

[General]
Verbosity = 0
Pipefs-Directory = /var/lib/nfs/rpc_pipefs
Domain = localdomain

[Mapping]
Nobody-User = nobody
Nobody-Group = nobody

To start the idmapd daemon, run systemctl start nfs-idmapd. In case you have modified /etc/idmapd.conf while the daemon was running, you need to restart it for the changes to become active: systemctl start nfs-idmapd.

For more information, see the man pages of idmapd and idmapd.conf (man idmapd and man idmapd.conf).

22.3.3 NFS with Kerberos Edit source

To use Kerberos authentication for NFS, Generic Security Services (GSS) must be enabled. Select Enable GSS Security in the initial YaST NFS Server dialog. You must have a working Kerberos server to use this feature. YaST does not set up the server but only uses the provided functionality. To use Kerberos authentication in addition to the YaST configuration, complete at least the following steps before running the NFS configuration:

  1. Make sure that both the server and the client are in the same Kerberos domain. They must access the same KDC (Key Distribution Center) server and share their krb5.keytab file (the default location on any machine is /etc/krb5.keytab). For more information about Kerberos, see Book “Security and Hardening Guide”, Chapter 6 “Network authentication with Kerberos”.

  2. Start the gssd service on the client with systemctl start rpc-gssd.service.

  3. Start the svcgssd service on the server with systemctl start rpc-svcgssd.service.

Kerberos authentication also requires the idmapd daemon to run on the server. For more information, refer to /etc/idmapd.conf.

For more information about configuring kerberized NFS, refer to the links in Section 22.6, “More information”.

22.4 Configuring clients Edit source

To configure your host as an NFS client, you do not need to install additional software. All needed packages are installed by default.

22.4.1 Importing file systems with YaST Edit source

Authorized users can mount NFS directories from an NFS server into the local file tree using the YaST NFS client module. Proceed as follows:

Procedure 22.2: Importing NFS directories
  1. Start the YaST NFS client module.

  2. Click Add in the NFS Shares tab. Enter the host name of the NFS server, the directory to import, and the mount point at which to mount this directory locally.

  3. When using NFSv4, select Enable NFSv4 in the NFS Settings tab. Additionally, the NFSv4 Domain Name must contain the same value as used by the NFSv4 server. The default domain is localdomain.

  4. To use Kerberos authentication for NFS, GSS security must be enabled. Select Enable GSS Security.

  5. Enable Open Port in Firewall in the NFS Settings tab if you use a firewall and want to allow access to the service from remote computers. The firewall status is displayed next to the check box.

  6. Click OK to save your changes.

The configuration is written to /etc/fstab and the specified file systems are mounted. When you start the YaST configuration client at a later time, it also reads the existing configuration from this file.

Tip
Tip: NFS as a root file system

On (diskless) systems where the root partition is mounted via network as an NFS share, you need to be careful when configuring the network device with which the NFS share is accessible.

When shutting down or rebooting the system, the default processing order is to turn off network connections then unmount the root partition. With NFS root, this order causes problems as the root partition cannot be cleanly unmounted as the network connection to the NFS share is already deactivated. To prevent the system from deactivating the relevant network device, open the network device configuration tab as described in Section 13.4.1.2.5, “Activating the network device” and choose On NFSroot in the Device Activation pane.

22.4.2 Importing file systems manually Edit source

The prerequisite for importing file systems manually from an NFS server is a running RPC port mapper. The nfs service takes care to start it properly; thus, start it by entering systemctl start nfs as root. Then remote file systems can be mounted in the file system just like local partitions, using the mount:

> sudo mount HOST:REMOTE-PATHLOCAL-PATH

To import user directories from the nfs.example.com machine, for example, use:

> sudo mount nfs.example.com:/home /home

To define a count of TCP connections that the clients make to the NFS server, you can use the nconnect option of the mount command. You can specify any number between 1 and 16, where 1 is the default value if the mount option has not been specified.

The nconnect setting is applied only during the first mount process to the particular NFS server. If the same client executes the mount command to the same NFS server, all already established connections will be shared—no new connection will be established. To change the nconnect setting, you have to unmount all client connections to the particular NFS server. Then you can define a new value for the nconnect option.

You can find the value of nconnect that is in currently in effect in the output of the mount, or in the file /proc/mounts. If there is no value for the mount option, then the option has not been used during mounting and the default value of 1 is in use.

Note
Note: Different number of connections than defined by nconnect

As you can close and open connections after the first mount, the actual count of connections does not necessarily have to be the same as the value of nconnect.

22.4.2.1 Using the automount service Edit source

The autofs daemon can be used to mount remote file systems automatically. Add the following entry to the /etc/auto.master file:

/nfsmounts /etc/auto.nfs

Now the /nfsmounts directory acts as the root for all the NFS mounts on the client if the auto.nfs file is filled appropriately. The name auto.nfs is chosen for the sake of convenience—you can choose any name. In auto.nfs add entries for all the NFS mounts as follows:

localdata -fstype=nfs server1:/data
nfs4mount -fstype=nfs4 server2:/

Activate the settings with systemctl start autofs as root. In this example, /nfsmounts/localdata, the /data directory of server1, is mounted with NFS and /nfsmounts/nfs4mount from server2 is mounted with NFSv4.

If the /etc/auto.master file is edited while the service autofs is running, the automounter must be restarted for the changes to take effect with systemctl restart autofs.

22.4.2.2 Manually editing /etc/fstab Edit source

A typical NFSv3 mount entry in /etc/fstab looks like this:

nfs.example.com:/data /local/path nfs rw,noauto 0 0

For NFSv4 mounts, use nfs4 instead of nfs in the third column:

nfs.example.com:/data /local/pathv4 nfs4 rw,noauto 0 0

The noauto option prevents the file system from being mounted automatically at start-up. If you want to mount the respective file system manually, it is possible to shorten the mount command specifying the mount point only:

> sudo mount /local/path
Note
Note: Mounting at start-up

If you do not enter the noauto option, the init scripts of the system will handle the mount of those file systems at start-up.

22.4.3 Parallel NFS (pNFS) Edit source

NFS is one of the oldest protocols, developed in the 1980s. As such, NFS is usually sufficient if you want to share small files. However, when you want to transfer big files or many clients want to access data, an NFS server becomes a bottleneck and has a significant impact on the system performance. This is because files are quickly getting bigger, whereas the relative speed of Ethernet has not fully kept pace.

When you request a file from a regular NFS server, the server looks up the file metadata, collects all the data, and transfers it over the network to your client. However, the performance bottleneck becomes apparent no matter how small or big the files are:

  • With small files, most of the time is spent collecting the metadata.

  • With big files, most of the time is spent on transferring the data from server to client.

pNFS, or parallel NFS, overcomes this limitation as it separates the file system metadata from the location of the data. As such, pNFS requires two types of servers:

  • A metadata or control server that handles all the non-data traffic

  • One or more storage server(s) that hold(s) the data

The metadata and the storage servers form a single, logical NFS server. When a client wants to read or write, the metadata server tells the NFSv4 client which storage server to use to access the file chunks. The client can access the data directly on the server.

openSUSE Leap supports pNFS on the client side only.

22.4.3.1 Configuring pNFS client with YaST Edit source

Proceed as described in Procedure 22.2, “Importing NFS directories”, but click the pNFS (v4.2) check box and optionally NFSv4 share. YaST will do all the necessary steps and will write all the required options in the file /etc/exports.

22.4.3.2 Configuring pNFS client manually Edit source

Refer to Section 22.4.2, “Importing file systems manually” to start. Most of the configuration is done by the NFSv4 server. For pNFS, the only difference is to add the minorversion option and the metadata server MDS_SERVER to your mount command:

> sudo mount -t nfs4 -o minorversion=1 MDS_SERVER MOUNTPOINT

To help with debugging, change the value in the /proc file system:

> sudo echo 32767 > /proc/sys/sunrpc/nfsd_debug
> sudo echo 32767 > /proc/sys/sunrpc/nfs_debug

22.5 Managing Access Control Lists over NFSv4 Edit source

There is no single standard for Access Control Lists (ACLs) in Linux beyond the simple read, write, and execute (rwx) flags for user, group, and others (ugo). One option for finer control is the Draft POSIX ACLs, which were never formally standardized by POSIX. Another is the NFSv4 ACLs, which were designed to be part of the NFSv4 network file system with the goal of making something that provided reasonable compatibility between POSIX systems on Linux and WIN32 systems on Microsoft Windows.

NFSv4 ACLs are not sufficient to correctly implement Draft POSIX ACLs so no attempt has been made to map ACL accesses on an NFSv4 client (such as using setfacl).

When using NFSv4, Draft POSIX ACLs cannot be used even in emulation and NFSv4 ACLs need to be used directly; that means while setfacl can work on NFSv3, it cannot work on NFSv4. To allow NFSv4 ACLs to be used on an NFSv4 file system, openSUSE Leap provides the nfs4-acl-tools package, which contains the following:

  • nfs4-getfacl

  • nfs4-setfacl

  • nfs4-editacl

These operate in a generally similar way to getfacl and setfacl for examining and modifying NFSv4 ACLs. These commands are effective only if the file system on the NFS server provides full support for NFSv4 ACLs. Any limitation imposed by the server will affect programs running on the client in that some particular combinations of Access Control Entries (ACEs) might not be possible.

It is not supported to mount NFS volumes locally on the exporting NFS server.

Additional InformationEdit source

For information, see Introduction to NFSv4 ACLs at http://wiki.linux-nfs.org/wiki/index.php/ACLs#Introduction_to_NFSv4_ACLs.

22.6 More information Edit source

In addition to the man pages of exports, nfs, and mount, information about configuring an NFS server and client is available in /usr/share/doc/packages/nfsidmap/README. For further documentation online, refer to the following Web sites:

  • For general information about network security, refer to Book “Security and Hardening Guide”, Chapter 23 “Masquerading and firewalls”.

  • Refer to Section 23.4, “Auto-mounting an NFS share” if you need to automatically mount NFS exports.

  • For more details about configuring NFS by using AutoYaST, refer to Book “AutoYaST Guide”, Chapter 4 “Configuration and installation options”, Section 4.19 “NFS client and server”.

  • For instructions about securing NFS exports with Kerberos, refer to Book “Security and Hardening Guide”, Chapter 6 “Network authentication with Kerberos”, Section 6.6 “Kerberos and NFS”.

  • Find the detailed technical documentation online at SourceForge.

22.7 Gathering information for NFS troubleshooting Edit source

22.7.1 Common troubleshooting Edit source

In some cases, you can understand the problem in your NFS by reading the error messages produced and looking into the /var/log/messages file. However, in many cases, the information provided by the error messages and in /var/log/messages is not detailed enough. In these cases, most NFS problems can be best understood through capturing network packets while reproducing the problem.

Clearly define the problem. Examine the problem by testing the system in a variety of ways and determining when the problem occurs. Isolate the simplest steps that lead to the problem. Then try to reproduce the problem as described in the procedure below.

Procedure 22.3: Reproducing the problem
  1. Capture network packets. On Linux, you can use the tcpdump command, which is supplied by the tcpdump package.

    An example of tcpdump syntax follows:

    tcpdump -s0 -i eth0 -w /tmp/nfs-demo.cap host x.x.x.x

    Where:

    s0

    Prevents packet truncation

    eth0

    Should be replaced with the name of the local interface which the packets will pass through. You can use the any value to capture all interfaces at the same time, but usage of this attribute often results in inferior data as well as confusion in analysis.

    w

    Designates the name of the capture file to write.

    x.x.x.x

    Should be replaced with the IP address of the other end of the NFS connection. For example, when taking a tcpdump at the NFS client side, specify the IP address of the NFS Server, and vice versa.

    Note
    Note

    In some cases, capturing the data at either the NFS client or NFS server is sufficient. However, in cases where end-to-end network integrity is in doubt, it is often necessary to capture data at both ends.

    Do not shut down the tcpdump process and proceed to the next step.

  2. (Optional) If the problem occurs during execution of the nfs mount command itself, you can try to use the high-verbosity option (-vvv) of the nfs mount command to get more output.

  3. (Optional) Get an strace of the reproduction method. An strace of reproduction steps records exactly what system calls were made at exactly what time. This information can be used to further determine on which events in the tcpdump you should focus.

    For example, if you found out that executing the command mycommand --param was failing on an NFS mount, then you could strace the command with:

    strace -ttf -s128 -o/tmp/nfs-strace.out mycommand --param

    In case you do not get any strace of the reproduction step, note the time when the problem was reproduced. Check the /var/log/messages log file to isolate the problem.

  4. Once the problem has been reproduced, stop tcpdump running in your terminal by pressing CTRLc. If the strace command resulted in a hang, also terminate the strace command.

  5. An administrator with experience in analyzing packet traces and strace data can now inspect data in /tmp/nfs-demo.cap and /tmp/nfs-strace.out.

22.7.2 Advanced NFS debugging Edit source

Important
Important: Advanced debugging is for experts

Please bear in mind that the following section is intended only for skilled NFS administrators who understand the NFS code. Therefore, perform the first steps described in Section 22.7.1, “Common troubleshooting” to help narrow down the problem and to inform an expert about which areas of debug code (if any) might be needed to learn deeper details.

There are various areas of debug code that can be enabled to gather additional NFS-related information. However, the debug messages are quite cryptic and the volume of them can be so large that the use of debug code can affect system performance. It may even impact the system enough to prevent the problem from occurring. In the majority of cases, the debug code output is not needed, nor is it typically useful to anyone who is not highly familiar with the NFS code.

22.7.2.1 Activating debugging with rpcdebug Edit source

The rpcdebug tool allows you to set and clear NFS client and server debug flags. In case the rpcdebug tool is not available in your openSUSE Leap installation, you can install it from the package nfs-client or nfs-kernel-server for the NFS server.

To set debug flags, run:

rpcdebug -m module -s flags

To clear the debug flags, run:

rpcdebug -m module -c flags

where module can be:

nfsd

Debug for the NFS server code

nfs

Debug for the NFS client code

nlm

Debug for the NFS Lock Manager, at either the NFS client or NFS server. This only applies to NFS v2/v3.

rpc

Debug for the Remote Procedure Call module, at either the NFS client or NFS server.

For information on detailed usage of the rpcdebug command, refer to the manual page:

man 8 rpcdebug

22.7.2.2 Activating debug for other code upon which NFS depends Edit source

NFS activities may depend on other related services, such as the NFS mount daemon—rpc.mountd. You can set options for related services within /etc/sysconfig/nfs.

For example, /etc/sysconfig/nfs contains the parameter:

MOUNTD_OPTIONS=""

To enable the debug mode, you have to use the -d option followed by any of the values: all, auth, call, general, or parse.

For example, the following code enables all forms of rpc.mountd logging:

MOUNTD_OPTIONS="-d all"

For all available options refer to the manual pages:

man 8 rpc.mountd

After changing /etc/sysconfig/nfs, services need to be restarted:

systemctl restart nfsserver  # for nfs server related changes
systemctl restart nfs  # for nfs client related changes

23 On-demand mounting with autofs Edit source

Abstract

autofs is a program that automatically mounts specified directories on an on-demand basis. It is based on a kernel module for high efficiency, and can manage both local directories and network shares. These automatic mount points are mounted only when they are accessed, and unmounted after a certain period of inactivity. This on-demand behavior saves bandwidth and results in better performance than static mounts managed by /etc/fstab. While autofs is a control script, automount is the command (daemon) that does the actual auto-mounting.

23.1 Installation Edit source

autofs is not installed on openSUSE Leap by default. To use its auto-mounting capabilities, first install it with

> sudo zypper install autofs

23.2 Configuration Edit source

You need to configure autofs manually by editing its configuration files with a text editor, such as vim. There are two basic steps to configure autofs—the master map file, and specific map files.

23.2.1 The master map file Edit source

The default master configuration file for autofs is /etc/auto.master. You can change its location by changing the value of the DEFAULT_MASTER_MAP_NAME option in /etc/sysconfig/autofs. Here is the content of the default one for openSUSE Leap:

#
# Sample auto.master file
# This is an automounter map and it has the following format
# key [ -mount-options-separated-by-comma ] location
# For details of the format look at autofs(5).1
#
#/misc  /etc/auto.misc2
#/net -hosts
#
# Include /etc/auto.master.d/*.autofs3
#
#+dir:/etc/auto.master.d
#
# Include central master map if it can be found using
# nsswitch sources.
#
# Note that if there are entries for /net or /misc (as
# above) in the included master map any keys that are the
# same will not be seen as the first read key seen takes
# precedence.
#
+auto.master4

1

The autofs manual page (man 5 autofs) offers a lot of valuable information on the format of the automounter maps.

2

Although commented out (#) by default, this is an example of a simple automounter mapping syntax.

3

In case you need to split the master map into several files, uncomment the line, and put the mappings (suffixed with .autofs) in the /etc/auto.master.d/ directory.

4

+auto.master ensures that those using NIS (see Book “Security and Hardening Guide”, Chapter 3 “Using NIS”, Section 3.1 “Configuring NIS servers” for more information on NIS) will still find their master map.

Entries in auto.master have three fields with the following syntax:

mount point      map name      options
mount point

The base location where to mount the autofs file system, such as /home.

map name

The name of a map source to use for mounting. For the syntax of the map files, see Section 23.2.2, “Map files”.

options

These options (if specified) will apply as defaults to all entries in the given map.

Tip
Tip: More information

For more detailed information on the specific values of the optional map-type, format, and options, see the auto.master manual page (man 5 auto.master).

The following entry in auto.master tells autofs to look in /etc/auto.smb, and create mount points in the /smb directory:

/smb   /etc/auto.smb

23.2.1.1 Direct mounts Edit source

Direct mounts create a mount point at the path specified inside the relevant map file. Instead of specifying the mount point in auto.master, replace the mount point field with /-. For example, the following line tells autofs to create a mount point in the place specified in auto.smb:

/-        /etc/auto.smb
Tip
Tip: Maps without full path

If the map file is not specified with its full local or network path, it is located using the Name Service Switch (NSS) configuration:

/-        auto.smb

23.2.2 Map files Edit source

Important
Important: Other types of maps

Although files are the most common types of maps for auto-mounting with autofs, there are other types as well. A map specification can be the output of a command, or a result of a query in LDAP or a database. For more detailed information on map types, see the manual page man 5 auto.master.

Map files specify the (local or network) source location, and the mount point where to mount the source locally. The general format of maps is similar to the master map. The difference is that the options appear between the mount point and the location instead of at the end of the entry:

mount point      options      location

Make sure that map files are not marked as executable. You can remove the executable bits by executing chmod -x MAP_FILE.

mount point

Specifies where to mount the source location. This can be either a single directory name (so-called indirect mount) to be added to the base mount point specified in auto.master, or the full path of the mount point (direct mount, see Section 23.2.1.1, “Direct mounts”).

options

Specifies an optional comma-separated list of mount options for the relevant entries. If auto.master contains options for this map file as well, these are appended.

location

Specifies from where the file system is to be mounted. It is usually an NFS or SMB volume in the usual notation host_name:path_name. If the file system to be mounted begins with a '/' (such as local /dev entries or smbfs shares), a colon symbol ':' needs to be prefixed, such as :/dev/sda1.

23.3 Operation and debugging Edit source

This section introduces information on how to control the autofs service operation, and how to view more debugging information when tuning the automounter operation.

23.3.1 Controlling the autofs service Edit source

The operation of the autofs service is controlled by systemd. The general syntax of the systemctl command for autofs is

> sudo systemctl SUB_COMMAND autofs

where SUB_COMMAND is one of:

enable

Starts the automounter daemon at boot.

start

Starts the automounter daemon.

stop

Stops the automounter daemon. Automatic mount points are not accessible.

status

Prints the current status of the autofs service together with a part of a relevant log file.

restart

Stops and starts the automounter, terminating all running daemons and starting new ones.

reload

Checks the current auto.master map, restarts those daemons whose entries have changed, and starts new ones for new entries.

23.3.2 Debugging automounter problems Edit source

If you experience problems when mounting directories with autofs, it is useful to run the automount daemon manually and watch its output messages:

  1. Stop autofs.

    > sudo systemctl stop autofs
  2. From one terminal, run automount manually in the foreground, producing verbose output.

    > sudo automount -f -v
  3. From another terminal, try to mount the auto-mounting file systems by accessing the mount points (for example by cd or ls).

  4. Check the output of automount from the first terminal for more information on why the mount failed, or why it was not even attempted.

23.4 Auto-mounting an NFS share Edit source

The following procedure illustrates how to configure autofs to auto-mount an NFS share available on your network. It uses the information mentioned above, and assumes you are familiar with NFS exports. For more information on NFS, see Chapter 22, Sharing file systems with NFS.

  1. Edit the master map file /etc/auto.master:

    > sudo vim /etc/auto.master

    Add a new entry for the new NFS mount at the end of /etc/auto.master:

    /nfs      /etc/auto.nfs      --timeout=10

    This tells autofs that the base mount point is /nfs, the NFS shares are specified in the /etc/auto.nfs map, and that all shares in this map will be automatically unmounted after 10 seconds of inactivity.

  2. Create a new map file for NFS shares:

    > sudo vim /etc/auto.nfs

    /etc/auto.nfs normally contains a separate line for each NFS share. Its format is described in Section 23.2.2, “Map files”. Add the line describing the mount point and the NFS share network address:

    export      jupiter.com:/home/geeko/doc/export

    The above line means that the /home/geeko/doc/export directory on the jupiter.com host will be auto-mounted to the /nfs/export directory on the local host (/nfs is taken from the auto.master map) when requested. The /nfs/export directory will be created automatically by autofs.

  3. Optionally comment out the related line in /etc/fstab if you previously mounted the same NFS share statically. The line should look similar to this:

    #jupiter.com:/home/geeko/doc/export /nfs/export nfs defaults 0 0
  4. Reload autofs and check if it works:

    > sudo systemctl restart autofs
    # ls -l /nfs/export
    total 20
    drwxr-xr-x  5 1001 users 4096 Jan 14  2017 .images/
    drwxr-xr-x 10 1001 users 4096 Aug 16  2017 .profiled/
    drwxr-xr-x  3 1001 users 4096 Aug 30  2017 .tmp/
    drwxr-xr-x  4 1001 users 4096 Apr 25 08:56 manual/

    If you can see the list of files on the remote share, then autofs is functioning.

23.5 Advanced topics Edit source

This section describes topics that are beyond the basic introduction to autofs—auto-mounting of NFS shares that are available on your network, using wild cards in map files, and information specific to the CIFS file system.

23.5.1 /net mount point Edit source

This helper mount point is useful if you use a lot of NFS shares. /net auto-mounts all NFS shares on your local network on demand. The entry is already present in the auto.master file, so all you need to do is uncomment it and restart autofs:

/net      -hosts
> sudo systemctl restart autofs

For example, if you have a server named jupiter with an NFS share called /export, you can mount it by typing

> sudo cd /net/jupiter/export

on the command line.

23.5.2 Using wild cards to auto-mount subdirectories Edit source

If you have a directory with subdirectories that you need to auto-mount individually—the typical case is the /home directory with individual users' home directories inside—autofs offers a clever solution.

In case of home directories, add the following line in auto.master:

/home      /etc/auto.home

Now you need to add the correct mapping to the /etc/auto.home file, so that the users' home directories are mounted automatically. One solution is to create separate entries for each directory:

wilber      jupiter.com:/home/wilber
penguin      jupiter.com:/home/penguin
tux      jupiter.com:/home/tux
[...]

This is very awkward as you need to manage the list of users inside auto.home. You can use the asterisk '*' instead of the mount point, and the ampersand '&' instead of the directory to be mounted:

*      jupiter:/home/&

23.5.3 Auto-mounting CIFS file system Edit source

If you want to auto-mount an SMB/CIFS share (see Chapter 21, Samba for more information on the SMB/CIFS protocol), you need to modify the syntax of the map file. Add -fstype=cifs in the option field, and prefix the share location with a colon ':'.

mount point      -fstype=cifs      ://jupiter.com/export

24 The Apache HTTP server Edit source

Abstract

According to the surveys from http://www.netcraft.com/ and https://w3techs.com/, the Apache HTTP Server (Apache) is one of the world's most popular Web servers. Developed by the Apache Software Foundation (http://www.apache.org/), it is available for most operating systems. openSUSE® Leap includes Apache version 2.4. This chapter describes how to install, configure and operate Apache. It also shows how to use additional modules, such as SSL, and how to troubleshoot Apache.

24.1 Quick start Edit source

This section will help you quickly configure and start Apache. You must be root to install and configure Apache.

24.1.1 Requirements Edit source

Make sure the following requirements are met before trying to set up the Apache Web server:

  1. The machine's network is configured properly. For more information about this topic, refer to Chapter 13, Basic networking.

  2. The machine's exact system time is maintained by synchronizing with a time server. This is necessary because parts of the HTTP protocol depend on the correct time. See Chapter 18, Time synchronization with NTP to learn more about this topic.

  3. The latest security updates are installed. If in doubt, run a YaST Online Update.

  4. The default Web server port (80) is opened in the firewall. For this, configure firewalld to allow the service http in the public zone. See Book “Security and Hardening Guide”, Chapter 23 “Masquerading and firewalls”, Section 23.4.1 “Configuring the firewall on the command line” for details.

24.1.2 Installation Edit source

Apache on openSUSE Leap is not installed by default. To install it with a standard, predefined configuration that runs out of the box, proceed as follows:

Procedure 24.1: Installing Apache with the default configuration
  1. Start YaST and select Software › Software Management.

  2. Choose Filter › Patterns and select Web and LAMP Server.

  3. Confirm the installation of the dependent packages to finish the installation process.

24.1.3 Start Edit source

You can start Apache automatically at boot time or start it manually.

To make sure that Apache is automatically started during boot in the targets multi-user.target and graphical.target, execute the following command:

> sudo systemctl enable apache2.service

For more information about the systemd targets in openSUSE Leap and a description of the YaST Services Manager, refer to Section 10.4, “Managing services with YaST”.

To manually start Apache using the shell, run systemctl start apache2.service.

Procedure 24.2: Checking if Apache is running

If you do not receive error messages when starting Apache, this usually indicates that the Web server is running. To test this:

  1. Start a browser and open http://localhost/.

    If Apache is up and running, you get a test page stating It works!.

  2. If you do not see this page, refer to Section 24.9, “Troubleshooting”.

Now that the Web server is running, you can add your own documents, adjust the configuration according to your needs, or add functionality by installing modules.

24.2 Configuring Apache Edit source

openSUSE Leap offers two configuration options:

Manual configuration offers a higher level of detail, but lacks the convenience of the YaST GUI.

Important
Important: Reload or restart Apache after configuration changes

Most configuration changes require a reload (some also a restart) of Apache to take effect. Manually reload Apache with systemctl reload apache2.service or use one of the restart options as described in Section 24.3, “Starting and stopping Apache”.

If you configure Apache with YaST, this can be taken care of automatically if you set HTTP Service to Enabled as described in Section 24.2.3.2, “HTTP server configuration”.

24.2.1 Apache configuration files Edit source

This section gives an overview of the Apache configuration files. If you use YaST for configuration, you do not need to touch these files—however, the information might be useful for you to switch to manual configuration later on.

Apache configuration files can be found in two different locations:

24.2.1.1 /etc/sysconfig/apache2 Edit source

/etc/sysconfig/apache2 controls global Apache settings, like modules to load, additional configuration files to include, flags with which the server should be started, and flags that should be added to the command line. Every configuration option in this file is extensively documented and therefore not mentioned here. For a general-purpose Web server, the settings in /etc/sysconfig/apache2 should be sufficient for any configuration needs.

24.2.1.2 /etc/apache2/ Edit source

/etc/apache2/ hosts all configuration files for Apache. In the following, the purpose of each file is explained. Each file includes several configuration options (also called directives). Every configuration option in these files is extensively documented and therefore not mentioned here.

The Apache configuration files are organized as follows:

/etc/apache2/
     |
     |- charset.conv
     |- conf.d/
     |   |
     |   |- *.conf
     |
     |- default-server.conf
     |- errors.conf
     |- global.conf
     |- httpd.conf
     |- listen.conf
     |- loadmodule.conf
     |- magic
     |- mime.types
     |- mod_*.conf
     |- protocols.conf
     |- server-tuning.conf
     |- ssl-global.conf
     |- ssl.*
     |- sysconfig.d
     |   |
     |   |- global.conf
     |   |- include.conf
     |   |- loadmodule.conf . .
     |
     |- uid.conf
     |- vhosts.d
     |   |- *.conf
Apache configuration files in /etc/apache2/
charset.conv

Specifies which character sets to use for different languages. Do not edit this file.

conf.d/*.conf

Configuration files added by other modules. These configuration files can be included into your virtual host configuration where needed. See vhosts.d/vhost.template for examples. By doing so, you can provide different module sets for different virtual hosts.

default-server.conf

Global configuration for all virtual hosts with reasonable defaults. Instead of changing the values, overwrite them with a virtual host configuration.

errors.conf

Defines how Apache responds to errors. To customize these messages for all virtual hosts, edit this file. Otherwise overwrite these directives in your virtual host configurations.

global.conf

General configuration of the main Web server process, such as the access path, error logs, or the level of logging.

httpd.conf

The main Apache server configuration file. Avoid changing this file. It primarily contains include statements and global settings. Overwrite global settings in the pertinent configuration files listed here. Change host-specific settings (such as document root) in your virtual host configuration.

listen.conf

Binds Apache to specific IP addresses and ports. Name-based virtual hosting is also configured here. For details, see Section 24.2.2.1.1, “Name-based virtual hosts”.

magic

Data for the mime_magic module that helps Apache automatically determine the MIME type of an unknown file. Do not change this file.

mime.types

MIME types known by the system (this is a link to /etc/mime.types). Do not edit this file. If you need to add MIME types not listed here, add them to mod_mime-defaults.conf.

mod_*.conf

Configuration files for the modules that are installed by default. Refer to Section 24.4, “Installing, activating and configuring modules” for details. Configuration files for optional modules reside in the directory conf.d.

protocols.conf

Configuration directives for serving pages over HTTP2 connection.

server-tuning.conf

Contains configuration directives for the different MPMs (see Section 24.4.4, “Multiprocessing modules”) and general configuration options that control Apache's performance. Properly test your Web server when making changes here.

ssl-global.conf and ssl.*

Global SSL configuration and SSL certificate data. Refer to Section 24.6, “Setting up a secure Web server with SSL” for details.

sysconfig.d/*.conf

Configuration files automatically generated from /etc/sysconfig/apache2. Do not change any of these files—edit /etc/sysconfig/apache2 instead. Do not put other configuration files in this directory.

uid.conf

Specifies under which user and group ID Apache runs. Do not change this file.

vhosts.d/*.conf

Your virtual host configuration should be located here. The directory contains template files for virtual hosts with and without SSL. Every file in this directory ending with .conf is automatically included in the Apache configuration. Refer to Section 24.2.2.1, “Virtual host configuration” for details.

24.2.2 Configuring Apache manually Edit source

Configuring Apache manually involves editing plain text configuration files as user root.

24.2.2.1 Virtual host configuration Edit source

The term virtual host refers to Apache's ability to serve multiple universal resource identifiers (URIs) from the same physical machine. This means that several domains, such as www.example.com and www.example.net, are run by a single Web server on one physical machine.

It is common practice to use virtual hosts to save administrative effort (only a single Web server needs to be maintained) and hardware expenses (each domain does not require a dedicated server). Virtual hosts can be name based, IP based, or port based.

To list all existing virtual hosts, use the command apache2ctl -S. This outputs a list showing the default server and all virtual hosts together with their IP addresses and listening ports. Furthermore, the list also contains an entry for each virtual host showing its location in the configuration files.

Virtual hosts can be configured via YaST as described in Section 24.2.3.1.4, “Virtual hosts” or by manually editing a configuration file. By default, Apache in openSUSE Leap is prepared for one configuration file per virtual host in /etc/apache2/vhosts.d/. All files in this directory with the extension .conf are automatically included to the configuration. A basic template for a virtual host is provided in this directory (vhost.template or vhost-ssl.template for a virtual host with SSL support).

Tip
Tip: Always create a virtual host configuration

It is recommended to always create a virtual host configuration file, even if your Web server only hosts one domain. By doing so, you not only have the domain-specific configuration in one file, but you can always fall back to a working basic configuration by simply moving, deleting or renaming the configuration file for the virtual host. For the same reason, you should also create separate configuration files for each virtual host.

When using name-based virtual hosts it is recommended to set up a default configuration that will be used when a domain name does not match a virtual host configuration. The default virtual host is the one whose configuration is loaded first. Since the order of the configuration files is determined by file name, start the file name of the default virtual host configuration with an underscore character (_) to make sure it is loaded first (for example: _default_vhost.conf).

The <VirtualHost></VirtualHost> block holds the information that applies to a particular domain. When Apache receives a client request for a defined virtual host, it uses the directives enclosed in this section. Almost all directives can be used in a virtual host context. See http://httpd.apache.org/docs/2.4/mod/quickreference.html for further information about Apache's configuration directives.

24.2.2.1.1 Name-based virtual hosts Edit source

With name-based virtual hosts, more than one Web site is served per IP address. Apache uses the host field in the HTTP header that is sent by the client to connect the request to a matching ServerName entry of one of the virtual host declarations. If no matching ServerName is found, the first specified virtual host is used as a default.

The first step is to create a <VirtualHost> block for each different name-based host that you want to serve. Inside each <VirtualHost> block, you will need at minimum a ServerName directive to designate which host is served and a DocumentRoot directive to show where in the file system the content for that host resides.

Example 24.1: Basic examples of name-based VirtualHost entries
<VirtualHost *:80>
# This first-listed virtual host is also the default for *:80
ServerName www.example.com
ServerAlias example.com
DocumentRoot /srv/www/htdocs/domain
</VirtualHost>

<VirtualHost *:80>
ServerName other.example.com
DocumentRoot /srv/www/htdocs/otherdomain
</VirtualHost>

The opening VirtualHost tag takes the IP address (or fully qualified domain name) as an argument in a name-based virtual host configuration. A port number directive is optional.

The wild card * is also allowed as a substitute for the IP address. When using IPv6 addresses, the address must be included in square brackets.

Example 24.2: Name-based VirtualHost directives
<VirtualHost 192.168.3.100:80>
  ...
</VirtualHost>

<VirtualHost 192.168.3.100>
  ...
</VirtualHost>

<VirtualHost *:80>
  ...
</VirtualHost>

<VirtualHost *>
  ...
</VirtualHost>

<VirtualHost [2002:c0a8:364::]>
  ...
</VirtualHost>
24.2.2.1.2 IP-based virtual hosts Edit source

This alternative virtual host configuration requires the setup of multiple IP addresses for a machine. One instance of Apache hosts several domains, each of which is assigned a different IP.

The physical server must have one IP address for each IP-based virtual host. If the machine does not have multiple network cards, virtual network interfaces (IP aliasing) can also be used.

The following example shows Apache running on a machine with the IP 192.168.3.100, hosting two domains on the additional IP addresses 192.168.3.101 and 192.168.3.102. A separate VirtualHost block is needed for every virtual server.

Example 24.3: IP-based VirtualHost directives
<VirtualHost 192.168.3.101>
  ...
</VirtualHost>

<VirtualHost 192.168.3.102>
  ...
</VirtualHost>

Here, VirtualHost directives are only specified for interfaces other than 192.168.3.100. When a Listen directive is also configured for 192.168.3.100, a separate IP-based virtual host must be created to answer HTTP requests to that interface—otherwise the directives found in the default server configuration (/etc/apache2/default-server.conf) are applied.

24.2.2.1.3 Basic virtual host configuration Edit source

At least the following directives should be in each virtual host configuration to set up a virtual host. See /etc/apache2/vhosts.d/vhost.template for more options.

ServerName

The fully qualified domain name under which the host should be addressed.

DocumentRoot

Path to the directory from which Apache should serve files for this host. For security reasons, access to the entire file system is forbidden by default, so you must explicitly unlock this directory within a Directory container.

ServerAdmin

E-mail address of the server administrator. This address is, for example, shown on error pages Apache creates.

ErrorLog

The error log file for this virtual host. Although it is not necessary to create separate error log files for each virtual host, it is common practice to do so, because it makes the debugging of errors much easier. /var/log/apache2/ is the default directory for Apache's log files.

CustomLog

The access log file for this virtual host. Although it is not necessary to create separate access log files for each virtual host, it is common practice to do so, because it allows the separate analysis of access statistics for each host. /var/log/apache2/ is the default directory for Apache's log files.

As mentioned above, access to the whole file system is forbidden by default for security reasons. Therefore, explicitly unlock the directories in which you have placed the files Apache should serve—for example the DocumentRoot:

<Directory "/srv/www/www.example.com/htdocs">
  Require all granted
</Directory>
Note
Note: Require all granted

In previous versions of Apache, the statement Require all granted was expressed as:

Order allow,deny
Allow from all

This old syntax is still supported by the mod_access_compat module.

The complete configuration file looks like this:

Example 24.4: Basic VirtualHost configuration
<VirtualHost 192.168.3.100>
  ServerName www.example.com
  DocumentRoot /srv/www/www.example.com/htdocs
  ServerAdmin webmaster@example.com
  ErrorLog /var/log/apache2/www.example.com_log
  CustomLog /var/log/apache2/www.example.com-access_log common
  <Directory "/srv/www/www.example.com/htdocs">
  Require all granted
  </Directory>
</VirtualHost>

24.2.3 Configuring Apache with YaST Edit source

To configure your Web server with YaST, start YaST and select Network Services › HTTP Server. When starting the module for the first time, the HTTP Server Wizard starts, prompting you to make a few basic decisions concerning administration of the server. After having finished the wizard, the HTTP Server Configuration dialog starts each time you call the HTTP Server module. For more information, see Section 24.2.3.2, “HTTP server configuration”.

24.2.3.1 HTTP server wizard Edit source

The HTTP Server Wizard consists of five steps. In the last step of the dialog, you may enter the expert configuration mode to make even more specific settings.

24.2.3.1.1 Network device selection Edit source

Here, specify the network interfaces and ports Apache uses to listen for incoming requests. You can select any combination of existing network interfaces and their respective IP addresses. Ports from all three ranges (well-known ports, registered ports, and dynamic or private ports) that are not reserved by other services can be used. The default setting is to listen on all network interfaces (IP addresses) on port 80.

Check Open Port In Firewall to open the ports in the firewall that the Web server listens on. This is necessary to make the Web server available on the network, which can be a LAN, WAN, or the public Internet. Keeping the port closed is only useful in test situations where no external access to the Web server is necessary. If you have multiple network interfaces, click Firewall Details to specify on which interface(s) the port(s) should be opened.

Click Next to continue with the configuration.

24.2.3.1.2 Modules Edit source

The Modules configuration option allows for the activation or deactivation of the script languages that the Web server should support. For the activation or deactivation of other modules, refer to Section 24.2.3.2.2, “Server modules”. Click Next to advance to the next dialog.

24.2.3.1.3 Default host Edit source

This option pertains to the default Web server. As explained in Section 24.2.2.1, “Virtual host configuration”, Apache can serve multiple virtual hosts from a single physical machine. The first declared virtual host in the configuration file is commonly called the default host. Each virtual host inherits the default host's configuration.

To edit the host settings (also called directives), select the appropriate entry in the table then click Edit. To add new directives, click Add. To delete a directive, select it and click Delete.

HTTP server wizard: default host
Figure 24.1: HTTP server wizard: default host

Here is list of the default settings of the server:

Document Root

Path to the directory from which Apache serves files for this host. /srv/www/htdocs is the default location.

Alias

Using Alias directives, URLs can be mapped to physical file system locations. This means that a certain path even outside the Document Root in the file system can be accessed via a URL aliasing that path.

The default openSUSE Leap Alias /icons points to /usr/share/apache2/icons for the Apache icons displayed in the directory index view.

ScriptAlias

Similar to the Alias directive, the ScriptAlias directive maps a URL to a file system location. The difference is that ScriptAlias designates the target directory as a CGI location, meaning that CGI scripts should be executed in that location.

Directory

With Directory settings, you can enclose a group of configuration options that will only apply to the specified directory.

Access and display options for the directories /srv/www/htdocs, /usr/share/apache2/icons and /srv/www/cgi-bin are configured here. It should not be necessary to change the defaults.

Include

With include, additional configuration files can be specified. Two Include directives are already preconfigured: /etc/apache2/conf.d/ is the directory containing the configuration files that come with external modules. With this directive, all files in this directory ending in .conf are included. With the second directive, /etc/apache2/conf.d/apache2-manual.conf, the apache2-manual configuration file is included.

Server Name

This specifies the default URL used by clients to contact the Web server. Use a fully qualified domain name (FQDN) to reach the Web server at http://FQDN/ or its IP address. You cannot choose an arbitrary name here—the server must be known under this name.

Server Administrator E-Mail

E-mail address of the server administrator. This address is, for example, shown on error pages Apache creates.

After finishing with the Default Host step, click Next to continue with the configuration.

24.2.3.1.4 Virtual hosts Edit source

In this step, the wizard displays a list of already configured virtual hosts (see Section 24.2.2.1, “Virtual host configuration”). If you have not made manual changes prior to starting the YaST HTTP wizard, no virtual host is present.

To add a host, click Add to open a dialog in which to enter basic information about the host, such as Server Name, Server Contents Root (DocumentRoot), and the Administrator E-Mail. Server Resolution is used to determine how a host is identified (name based or IP based). Specify the name or IP address with Change Virtual Host ID

Clicking Next advances to the second part of the virtual host configuration dialog.

In part two of the virtual host configuration you can specify whether to enable CGI scripts and which directory to use for these scripts. It is also possible to enable SSL. If you do so, you must specify the path to the certificate as well. See Section 24.6.2, “Configuring Apache with SSL” for details on SSL and certificates. With the Directory Index option, you can specify which file to display when the client requests a directory (by default, index.html). Add one or more file names (space-separated) to change this. With Enable Public HTML, the content of the users public directories (~USER/public_html/) is made available on the server under http://www.example.com/~USER.

Important
Important: Creating virtual hosts

It is not possible to add virtual hosts at will. If using name-based virtual hosts, each host name must be resolved on the network. If using IP-based virtual hosts, you can assign only one host to each IP address available.

24.2.3.1.5 Summary Edit source

This is the final step of the wizard. Here, determine how and when the Apache server is started: when booting or manually. Also see a short summary of the configuration made so far. If you are satisfied with your settings, click Finish to complete configuration. To change something, click Back until you have reached the desired dialog. Clicking HTTP Server Expert Configuration opens the dialog described in Section 24.2.3.2, “HTTP server configuration”.

HTTP server wizard: summary
Figure 24.2: HTTP server wizard: summary

24.2.3.2 HTTP server configuration Edit source

The HTTP Server Configuration dialog also lets you make even more adjustments to the configuration than the wizard (which only runs if you configure your Web server for the first time). It consists of four tabs described in the following. No configuration option you change here is effective immediately—you always must confirm your changes with Finish to make them effective. Clicking Abort leaves the configuration module and discards your changes.

24.2.3.2.1 Listen ports and addresses Edit source

In HTTP Service, select whether Apache should be running (Enabled) or stopped (Disabled). In Listen on Ports, Add, Edit, or Delete addresses and ports on which the server should be available. The default is to listen on all interfaces on port 80. You should always check Open Port In Firewall, because otherwise the Web server is not reachable from outside. Keeping the port closed is only useful in test situations where no external access to the Web server is necessary. If you have multiple network interfaces, click Firewall Details to specify on which interface(s) the port(s) should be opened.

With Log Files, watch either the access log file or the error log file. This is useful if you want to test your configuration. The log file opens in a separate window from which you can also restart or reload the Web server. For details, see Section 24.3, “Starting and stopping Apache”. These commands are effective immediately and their log messages are also displayed immediately.

HTTP server configuration: listen ports and addresses
Figure 24.3: HTTP server configuration: listen ports and addresses
24.2.3.2.2 Server modules Edit source

You can change the status (enabled or disabled) of Apache2 modules by clicking Toggle Status. Click Add Module to add a new module that is already installed but not yet listed. Learn more about modules in Section 24.4, “Installing, activating and configuring modules”.

HTTP server configuration: server modules
Figure 24.4: HTTP server configuration: server modules
24.2.3.2.3 Main host or hosts Edit source

These dialogs are identical to the ones already described. Refer to Section 24.2.3.1.3, “Default host” and Section 24.2.3.1.4, “Virtual hosts”.

24.3 Starting and stopping Apache Edit source

If configured with YaST as described in Section 24.2.3, “Configuring Apache with YaST”, Apache is started at boot time in the multi-user.target and graphical.target. You can change this behavior using YaST's Services Manager or with the systemctl command line tool (systemctl enable or systemctl disable).

To start, stop or manipulate Apache on a running system, use either the systemctl or the apachectl commands as described below.

For general information about systemctl commands, refer to Section 10.2.1, “Managing services in a running system”.

systemctl status apache2.service

Checks if Apache is started.

systemctl start apache2.service

Starts Apache if it is not already running.

systemctl stop apache2.service

Stops Apache by terminating the parent process.

systemctl restart apache2.service

Stops and then restarts Apache. Starts the Web server if it was not running before.

systemctl try-restart apache2.service

Stops then restarts Apache only if it is already running.

systemctl reload apache2.service

Stops the Web server by advising all forked Apache processes to first finish their requests before shutting down. As each process dies, it is replaced by a newly started one, resulting in a complete restart of Apache.

Tip
Tip: Restarting Apache in production environments

This command allows activating changes in the Apache configuration without causing connection break-offs.

systemctl stop apache2.service

Stops the Web server after a defined period of time configured with GracefulShutdownTimeout to ensure that existing requests can be finished.

apachectl configtest

Checks the syntax of the configuration files without affecting a running Web server. Because this check is forced every time the server is started, reloaded or restarted, it is usually not necessary to run the test explicitly (if a configuration error is found, the Web server is not started, reloaded or restarted).

apachectl status and apachectl fullstatus

Dumps a short or full status screen, respectively. Requires the module mod_status to be enabled and a text-based browser (such as links or w3m) to be installed. In addition to that, STATUS must be added to APACHE_SERVER_FLAGS in the file /etc/sysconfig/apache2.

Tip
Tip: Additional flags

If you specify additional flags to the commands, these are passed through to the Web server.

24.4 Installing, activating and configuring modules Edit source

The Apache software is built in a modular fashion: all functionality except certain core tasks are handled by modules. This has progressed so far that even HTTP is processed by a module (http_core).

Apache modules can be compiled into the Apache binary at build time or be dynamically loaded at runtime. Refer to Section 24.4.2, “Activation and deactivation” for details of how to load modules dynamically.

Apache modules are organized into the following categories:

Base modules

Base modules are compiled into Apache by default. Apache in openSUSE Leap has only mod_so (needed to load other modules) and http_core compiled in. All others are available as shared objects: rather than being included in the server binary itself, they can be included at runtime.

Extension modules

Modules labeled as extensions are included in the Apache software package, but are usually not compiled into the server statically. In openSUSE Leap, they are available as shared objects that can be loaded into Apache at runtime.

External modules

Modules labeled external are not included in the official Apache distribution. However, openSUSE Leap provides several of them.

Multiprocessing modules (MPMs)

MPMs are responsible for accepting and handling requests to the Web server, representing the core of the Web server software.

24.4.1 Module installation Edit source

If you have done a default installation as described in Section 24.1.2, “Installation”, the following modules are already installed: all base and extension modules, the multiprocessing module Prefork MPM, and the external module mod_python.

You can install additional external modules by starting YaST and choosing Software › Software Management. Now choose View › Search and search for apache. Among other packages, the results list contains all available external Apache modules.

24.4.2 Activation and deactivation Edit source

Activate or deactivate particular modules either manually or with YaST. In YaST, script language modules (PHP 8 and Python) need to be enabled or disabled with the module configuration described in Section 24.2.3.1, “HTTP server wizard”. All other modules can be enabled or disabled as described in Section 24.2.3.2.2, “Server modules”.

If you prefer to activate or deactivate the modules manually, use the commands a2enmod MODULE or a2dismod MODULE, respectively. a2enmod -l outputs a list of all currently active modules.

Important
Important: Including configuration files for external modules

If you have activated external modules manually, make sure to load their configuration files in all virtual host configurations. Configuration files for external modules are located under /etc/apache2/conf.d/ and are loaded in /etc/apache2/default-server.conf by default. For more fine-grained control you can comment out the inclusion in /etc/apache2/default-server.conf and add it to specific virtual hosts only. See /etc/apache2/vhosts.d/vhost.template for examples.

24.4.3 Base and extension modules Edit source

All base and extension modules are described in detail in the Apache documentation. Only a brief description of the most important modules is available here. Refer to http://httpd.apache.org/docs/2.4/mod/ to learn details about each module.

mod_actions

Provides methods to execute a script whenever a certain MIME type (such as application/pdf), a file with a specific extension (like .rpm), or a certain request method (such as GET) is requested. This module is enabled by default.

mod_alias

Provides Alias and Redirect directives with which you can map a URL to a specific directory (Alias) or redirect a requested URL to another location. This module is enabled by default.

mod_auth*

The authentication modules provide different authentication methods: basic authentication with mod_auth_basic or digest authentication with mod_auth_digest.

mod_auth_basic and mod_auth_digest must be combined with an authentication provider module, mod_authn_* (for example, mod_authn_file for text file–based authentication) and with an authorization module mod_authz_* (for example, mod_authz_user for user authorization).

More information about this topic is available in the Authentication HOWTO at http://httpd.apache.org/docs/2.4/howto/auth.html.

mod_auth_openidc

mod_auth_openidc the only certified way to use OpenID Connect with the Apache HTTP server. (See https://openid.net/developers/certified/.)

mod_autoindex

Autoindex generates directory listings when no index file (for example, index.html) is present. The look and feel of these indexes is configurable. This module is enabled by default. However, directory listings are disabled by default via the Options directive—overwrite this setting in your virtual host configuration. The default configuration file for this module is located at /etc/apache2/mod_autoindex-defaults.conf.

mod_cgi

mod_cgi is needed to execute CGI scripts. This module is enabled by default.

mod_deflate

Using this module, Apache can be configured to compress given file types on the fly before delivering them.

mod_dir

mod_dir provides the DirectoryIndex directive with which you can configure which files are automatically delivered when a directory is requested (index.html by default). It also provides an automatic redirect to the correct URL when a directory request does not contain a trailing slash. This module is enabled by default.

mod_env

Controls the environment that is passed to CGI scripts or SSI pages. Environment variables can be set or unset or passed from the shell that invoked the httpd process. This module is enabled by default.

mod_expires

With mod_expires, you can control how often proxy and browser caches refresh your documents by sending an Expires header. This module is enabled by default.

mod_http2

With mod_http2, Apache gains support for the HTTP/2 protocol. It can be enabled by specifying Protocols h2 http/1.1 in a VirtualHost.

mod_include

mod_include lets you use Server Side Includes (SSI), which provide a basic functionality to generate HTML pages dynamically. This module is enabled by default.

mod_info

Provides a comprehensive overview of the server configuration under http://localhost/server-info/. For security reasons, you should always limit access to this URL. By default only localhost is allowed to access this URL. mod_info is configured at /etc/apache2/mod_info.conf.

mod_log_config

With this module, you can configure the look of the Apache log files. This module is enabled by default.

mod_mime

The mime module ensures that a file is delivered with the correct MIME header based on the file name's extension (for example text/html for HTML documents). This module is enabled by default.

mod_negotiation

Necessary for content negotiation. See http://httpd.apache.org/docs/2.4/content-negotiation.html for more information. This module is enabled by default.

mod_rewrite

Provides the functionality of mod_alias, but offers more features and flexibility. With mod_rewrite, you can redirect URLs based on multiple rules, request headers, and more.

mod_setenvif

Sets environment variables based on details of the client's request, such as the browser string the client sends, or the client's IP address. This module is enabled by default.

mod_spelling

mod_spelling attempts to automatically correct typographical errors in URLs, such as capitalization errors.

mod_ssl

Enables encrypted connections between Web server and clients. See Section 24.6, “Setting up a secure Web server with SSL” for details. This module is enabled by default.

mod_status

Provides information on server activity and performance under http://localhost/server-status/. For security reasons, you should always limit access to this URL. By default, only localhost is allowed to access this URL. mod_status is configured at /etc/apache2/mod_status.conf.

mod_suexec

mod_suexec lets you run CGI scripts under a different user and group. This module is enabled by default.

mod_userdir

Enables user-specific directories available under ~USER/. The UserDir directive must be specified in the configuration. This module is enabled by default.

24.4.4 Multiprocessing modules Edit source

openSUSE Leap provides two different multiprocessing modules (MPMs) for use with Apache:

24.4.4.1 Prefork MPM Edit source

The prefork MPM implements a non-threaded, preforking Web server. It makes the Web server behave similarly to Apache version 1.x. In this version it isolates each request and handles it by forking a separate child process. Thus problematic requests cannot affect others, avoiding a lockup of the Web server.

While providing stability with this process-based approach, the prefork MPM consumes more system resources than its counterpart, the worker MPM. The prefork MPM is considered the default MPM for Unix-based operating systems.

Important
Important: MPMs in this document

This document assumes Apache is used with the prefork MPM.

24.4.4.2 Worker MPM Edit source

The worker MPM provides a multi-threaded Web server. A thread is a lighter form of a process. The advantage of a thread over a process is its lower resource consumption. Instead of only forking child processes, the worker MPM serves requests by using threads with server processes. The preforked child processes are multi-threaded. This approach makes Apache perform better by consuming fewer system resources than the prefork MPM.

One major disadvantage is the stability of the worker MPM: if a thread becomes corrupt, all threads of a process can be affected. In the worst case, this may result in a server crash. Especially when using the Common Gateway Interface (CGI) with Apache under heavy load, internal server errors might occur because of threads being unable to communicate with system resources. Another argument against using the worker MPM with Apache is that not all available Apache modules are thread-safe and thus cannot be used with the worker MPM.

Warning
Warning: Using PHP modules with MPMs

Not all available PHP modules are thread-safe. Using the worker MPM with mod_php is strongly discouraged.

24.4.5 External modules Edit source

Find a list of all external modules shipped with openSUSE Leap here. Find the module's documentation in the listed directory.

mod_apparmor

Adds support to Apache to provide AppArmor confinement to individual CGI scripts handled by modules like mod_php8.

Package Name: apache2-mod_apparmor
More Information: Book “Security and Hardening Guide
mod_php8

PHP is a server-side, cross-platform HTML embedded scripting language.

Package Name: apache2-mod_php8
Configuration File: /etc/apache2/conf.d/php8.conf
mod_python

mod_python allows embedding Python within the Apache HTTP server for a considerable boost in performance and added flexibility in designing Web-based applications.

Package Name: apache2-mod_python
More Information: /usr/share/doc/packages/apache2-mod_python
mod_security

mod_security provides a Web application firewall to protect Web applications from a range of attacks. It also enables HTTP traffic monitoring and real-time analysis.

Package Name: apache2-mod_security2
Configuration File: /etc/apache2/conf.d/mod_security2.conf
More Information: /usr/share/doc/packages/apache2-mod_security2
Documentation: http://modsecurity.org/documentation/

24.4.6 Compilation Edit source

Apache can be extended by advanced users by writing custom modules. To develop modules for Apache or compile third-party modules, the package apache2-devel is required along with the corresponding development tools. apache2-devel also contains the apxs2 tools, which are necessary for compiling additional modules for Apache.

apxs2 enables the compilation and installation of modules from source code (including the required changes to the configuration files), which creates dynamic shared objects (DSOs) that can be loaded into Apache at runtime.

The apxs2 binaries are located under /usr/sbin:

  • /usr/sbin/apxs2—suitable for building an extension module that works with any MPM. The installation location is /usr/lib64/apache2.

  • /usr/sbin/apxs2-prefork—suitable for prefork MPM modules. The installation location is /usr/lib64/apache2-prefork.

  • /usr/sbin/apxs2-worker—suitable for worker MPM modules. The installation location is /usr/lib64/apache2-worker.

Install and activate a module from source code with the following commands:

> sudo cd /path/to/module/source
> sudo apxs2 -cia MODULE.c

where -c compiles the module, -i installs it, and -a activates it. Other options of apxs2 are described in the apxs2(1) man page.

24.5 Enabling CGI scripts Edit source

Apache's Common Gateway Interface (CGI) lets you create dynamic content with programs or scripts (CGI scripts). CGI scripts can be written in any programming language. Mostly, script languages such as PHP are used.

To enable Apache to deliver content created by CGI scripts, mod_cgi needs to be activated. mod_alias is also needed. Both modules are enabled by default. Refer to Section 24.4.2, “Activation and deactivation” for details on activating modules.

Warning
Warning: CGI security

Allowing the server to execute CGI scripts is a potential security hole. Refer to Section 24.8, “Avoiding security problems” for additional information.

24.5.1 Apache configuration Edit source

In openSUSE Leap, the execution of CGI scripts is only allowed in the directory /srv/www/cgi-bin/. This location is already configured to execute CGI scripts. If you have created a virtual host configuration (see Section 24.2.2.1, “Virtual host configuration”) and want to place your scripts in a host-specific directory, you must unlock and configure this directory.

Example 24.5: VirtualHost CGI configuration
ScriptAlias /cgi-bin/ "/srv/www/www.example.com/cgi-bin/"1

<Directory "/srv/www/www.example.com/cgi-bin/">
 Options +ExecCGI2
 AddHandler cgi-script .cgi .pl3
 Require all granted4
</Directory>

1

Tells Apache to handle all files within this directory as CGI scripts.

2

Enables CGI script execution

3

Tells the server to treat files with the extensions .pl and .cgi as CGI scripts. Adjust according to your needs.

4

The Require directive controls the default access state. In this case, access is granted to the specified directory without limitation. For more information on authentication and authorization, see http://httpd.apache.org/docs/2.4/howto/auth.html.

24.5.2 Running an example script Edit source

CGI programming differs from regular programming in that the CGI programs and scripts must be preceded by a MIME-Type header such as Content-type: text/html. This header is sent to the client, so it understands what kind of content it receives. Secondly, the script's output must be something the client, usually a Web browser, understands—HTML or plain text or images, for example.

A simple test script available under /usr/share/doc/packages/apache2/test-cgi is part of the Apache package. It outputs the content of certain environment variables as plain text. Copy this script to either /srv/www/cgi-bin/ or the script directory of your virtual host (/srv/www/www.example.com/cgi-bin/) and name it test.cgi. Edit the file to have #!/bin/sh as the first line.

Files accessible by the Web server should be owned by the user root. For additional information see Section 24.8, “Avoiding security problems”. Because the Web server runs with a different user, the CGI scripts must be world-executable and world-readable. Change into the CGI directory and use the command chmod 755 test.cgi to apply the proper permissions.

Now call http://localhost/cgi-bin/test.cgi or http://www.example.com/cgi-bin/test.cgi. You should see the CGI/1.0 test script report.

24.5.3 CGI troubleshooting Edit source

If you do not see the output of the test program but an error message instead, check the following:

CGI troubleshooting
  • Have you reloaded the server after having changed the configuration? If not, reload with systemctl reload apache2.service.

  • If you have configured your custom CGI directory, is it configured properly? If in doubt, try the script within the default CGI directory /srv/www/cgi-bin/ and call it with http://localhost/cgi-bin/test.cgi.

  • Are the file permissions correct? Change into the CGI directory and execute ls -l test.cgi. The output should start with

    -rwxr-xr-x  1 root root
  • Make sure that the script does not contain programming errors. If you have not changed test.cgi, this should not be the case, but if you are using your own programs, always make sure that they do not contain programming errors.

24.6 Setting up a secure Web server with SSL Edit source

Whenever sensitive data, such as credit card information, is transferred between Web server and client, it is desirable to have a secure, encrypted connection with authentication. mod_ssl provides strong encryption using the secure sockets layer (SSL) and transport layer security (TLS) protocols for HTTP communication between a client and the Web server. Using TLS/SSL, a private connection between Web server and client is established. Data integrity is ensured and client and server can authenticate each other.

For this purpose, the server sends an SSL certificate that holds information proving the server's valid identity before any request to a URL is answered. In turn, this guarantees that the server is the uniquely correct end point for the communication. Additionally, the certificate generates an encrypted connection between client and server that can transport information without the risk of exposing sensitive, plain-text content.

mod_ssl does not implement the TLS/SSL protocols itself, but acts as an interface between Apache and an SSL library. In openSUSE Leap, the OpenSSL library is used. OpenSSL is automatically installed with Apache.

The most visible effect of using mod_ssl with Apache is that URLs are prefixed with https:// instead of http://.

24.6.1 Creating an SSL certificate Edit source

To use TLS/SSL with the Web server, you need to create an SSL certificate. This certificate is needed for the authorization between Web server and client, so that each party can identify the other party. To ensure the integrity of the certificate, it must be signed by a party every user trusts.

There are three types of certificates you can create: a test certificate for testing purposes only, a self-signed certificate for a defined circle of users that trust you, and a certificate signed by an independent, publicly known certificate authority (CA).

Creating a certificate is a two step process. First, a private key for the certificate authority is generated then the server certificate is signed with this key.

Tip
Tip: More information

To learn more about concepts and definitions of TLS/SSL, refer to http://httpd.apache.org/docs/2.4/ssl/ssl_intro.html.

24.6.1.1 Creating a test certificate Edit source

To generate a test certificate, call the script /usr/bin/gensslcert. It creates or overwrites the files listed below. Use gensslcert's optional switches to fine-tune the certificate. Call /usr/bin/gensslcert -h for more information.

  • /etc/apache2/ssl.crt/ca.crt

  • /etc/apache2/ssl.crt/server.crt

  • /etc/apache2/ssl.key/server.key

  • /etc/apache2/ssl.csr/server.csr

A copy of ca.crt is also placed at /srv/www/htdocs/CA.crt for download.

Important
Important: For testing purposes only

A test certificate should never be used on a production system. Only use it for testing purposes.

24.6.1.2 Creating a self-signed certificate Edit source

If you are setting up a secure Web server for an intranet or for a defined circle of users, it is probably sufficient if you sign a certificate with your own certificate authority (CA). Note that visitors to such a site will see a warning like this is an untrusted site, as Web browsers do not recognize self-signed certificates.

Important
Important: Self-signed certificates

Only use a self-signed certificate on a Web server that is accessed by people who know and trust you as a certificate authority. It is not recommended to use such a certificate for a public shop, for example.

First you need to generate a certificate signing request (CSR). You are going to use openssl, with PEM as the certificate format. During this step, you will be asked for a passphrase, and to answer several questions. Remember the passphrase you enter as you will need it in the future.

> sudo openssl req -new > new.cert.csr
Generating a 1024 bit RSA private key
..++++++
.........++++++
writing new private key to 'privkey.pem'
Enter PEM pass phrase:1
Verifying - Enter PEM pass phrase:2
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:3
State or Province Name (full name) [Some-State]:4
Locality Name (eg, city) []:5
Organization Name (eg, company) [Internet Widgits Pty Ltd]:6
Organizational Unit Name (eg, section) []:7
Common Name (for example server FQDN, or YOUR name) []:8
Email Address []:9

Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:10
An optional company name []:11

1

Fill in your passphrase.

2

Fill it in once more (and remember it).

3

Fill in your 2 letter country code, such as GB or CZ.

4

Fill in the name of the state where you live.

5

Fill in the city name, such as Prague.

6

Fill in the name of the organization you work for.

7

Fill in your organization unit, or leave blank if you have none.

8

Fill in either the domain name of the server, or your first and last name.

9

Fill in your work e-mail address.

10

Leave the challenge password empty, otherwise you need to enter it every time you restart the Apache Web server.

11

Fill in the optional company name, or leave blank.

Now you can generate the certificate. You are going to use openssl again, and the format of the certificate is the default PEM.

Procedure 24.3: Generating the certificate
  1. Export the private part of the key to new.cert.key. You will be prompted for the passphrase you entered when creating the certificate signing request (CSR).

    > sudo openssl rsa -in privkey.pem -out new.cert.key
  2. Generate the public part of the certificate according to the information you filled out in the signing request. The -days option specifies the length of time before the certificate expires. You can revoke a certificate, or replace one before it expires.

    > sudo openssl x509 -in new.cert.csr -out new.cert.cert -req \
    -signkey new.cert.key -days 365
  3. Copy the certificate files to the relevant directories, so that the Apache server can read them. Make sure that the private key /etc/apache2/ssl.key/server.key is not world-readable, while the public PEM certificate /etc/apache2/ssl.crt/server.crt is.

    > sudo cp new.cert.cert /etc/apache2/ssl.crt/server.crt
    > sudo cp new.cert.key /etc/apache2/ssl.key/server.key
Tip
Tip: Public certificate location

The last step is to copy the public certificate file from /etc/apache2/ssl.crt/server.crt to a location where your users can access it to incorporate it into the list of known and trusted CAs in their Web browsers. Otherwise a browser complains that the certificate was issued by an unknown authority.

24.6.1.3 Getting an officially signed certificate Edit source

There are several official certificate authorities that sign your certificates. The certificate is signed by a trustworthy third party, so can be fully trusted. Publicly operating secure Web servers usually have an officially signed certificate. A list of the most used Certificate Authorities (CAs) is available at https://en.wikipedia.org/wiki/Certificate_authority#Providers.

When requesting an officially signed certificate, you do not send a certificate to the CA. Instead, issue a Certificate Signing Request (CSR). To create a CSR, run the following command:

> openssl req -new -newkey rsa:2048 -nodes -keyout newkey.pem -out newreq.pem

You are asked to enter a distinguished name. This requires you to answer a few questions, such as country name or organization name. Enter valid data—everything you enter here later shows up in the certificate and is checked. You do not need to answer every question. If one does not apply to you or you want to leave it blank, use .. Common name is the name of the CA itself—choose a significant name, such as My company CA. Last, a challenge password and an alternative company name must be entered.

Find the CSR in the directory from which you called the script. The file is named newreq.pem.

24.6.2 Configuring Apache with SSL Edit source

The default port for TLS/SSL requests on the Web server side is 443. There is no conflict between a regular Apache listening on port 80 and an TLS/SSL-enabled Apache listening on port 443. In fact, HTTP and HTTPS can be run with the same Apache instance. Usually separate virtual hosts are used to dispatch requests to port 80 and port 443 to separate virtual servers.

Important
Important: Firewall configuration

Do not forget to open the firewall for SSL-enabled Apache on port 443. This can be done with firewalld as described in Book “Security and Hardening Guide”, Chapter 23 “Masquerading and firewalls”, Section 23.4.1 “Configuring the firewall on the command line”.

The SSL module is enabled by default in the global server configuration. In case it has been disabled on your host, activate it with the following command: a2enmod ssl. To finally enable SSL, the server needs to be started with the flag SSL. To do so, call a2enflag SSL (case-sensitive!). If you have chosen to encrypt your server certificate with a password, you should also increase the value for APACHE_TIMEOUT in /etc/sysconfig/apache2, so you have enough time to enter the passphrase when Apache starts. Restart the server to make these changes active. A reload is not sufficient.

The virtual host configuration directory contains a template /etc/apache2/vhosts.d/vhost-ssl.template with SSL-specific directives that are extensively documented. Refer to Section 24.2.2.1, “Virtual host configuration” for the general virtual host configuration.

To get started, copy the template to /etc/apache2/vhosts.d/MYSSL-HOST.conf and edit it. Adjusting the values for the following directives should be sufficient:

  • DocumentRoot

  • ServerName

  • ServerAdmin

  • ErrorLog

  • TransferLog

24.6.2.1 Name-based virtual hosts and SSL Edit source

By default it is not possible to run multiple SSL-enabled virtual hosts on a server with only one IP address. Name-based virtual hosting requires that Apache knows which server name has been requested. The problem with SSL connections is, that such a request can only be read after the SSL connection has already been established (by using the default virtual host). As a result, users will receive a warning message stating that the certificate does not match the server name.

openSUSE Leap comes with an extension to the SSL protocol called Server Name Indication (SNI) addresses this issue by sending the name of the virtual domain as part of the SSL negotiation. This enables the server to switch to the correct virtual domain early and present the browser the correct certificate.

SNI is enabled by default on openSUSE Leap. To enable Name-Based Virtual Hosts for SSL, configure the server as described in Section 24.2.2.1.1, “Name-based virtual hosts” (you need to use port 443 rather than port 80 with SSL).

Important
Important: SNI browser support

SNI must also be supported on the client side. However, SNI is supported by most browsers, except for certain older browsers. For more information, see https://en.wikipedia.org/wiki/Server_Name_Indication#Support.

To configure handling of non-SNI capable browsers, use the directive SSLStrictSNIVHostCheck. When set to on in the server configuration, non-SNI capable browser will be rejected for all virtual hosts. When set to on within a VirtualHost directive, access to this particular host will be rejected.

When set to off in the server configuration, the server will behave as if not having SNI support. SSL requests will be handled by the first virtual host defined (for port 443).

24.7 Running multiple Apache instances on the same server Edit source

Running multiple Apache instances on the same server has several advantages over running multiple virtual hosts (see Section 24.2.2.1, “Virtual host configuration”):

  • When a virtual host needs to be disabled for some time, you need to change the Web server configuration and restart it so that the change takes effect.

  • In case of problems with one virtual host, you need to restart all of them.

You can run the default Apache instance as usual:

> sudo systemctl start apache2.service

It reads the default /etc/sysconfig/apache2 file. If the file is not present, or it is present but it does not set the APACHE_HTTPD_CONF variable, it reads /etc/apache2/httpd.conf.

To activate another Apache instance, run:

> sudo systemctl start apache2@INSTANCE_NAME

For example:

> sudo systemctl start apache2@example_web.org

By default, the instance uses /etc/apache2@example_web.org/httpd.conf as a main configuration file, which can be overwritten by setting APACHE_HTTPD_CONF in /etc/sysconfig/apache2@example_web.org.

An example to set up an additional instance of Apache follows. Note that you need to execute all the commands as root.

Procedure 24.4: Configuring an additional Apache instance
  1. Create a new configuration file based on /etc/sysconfig/apache2, for example /etc/sysconfig/apache2@example_web.org:

    > sudo cp /etc/sysconfig/apache2 /etc/sysconfig/apache2@example_web.org
  2. Edit the file /etc/sysconfig/apache2@example_web.org and change the line containing

    APACHE_HTTPD_CONF

    to

    APACHE_HTTPD_CONF="/etc/apache2/httpd@example_web.org.conf"
  3. Create the file /etc/apache2/httpd@example_web.org.conf based on /etc/apache2/httpd.conf.

    > sudo cp /etc/apache2/httpd.conf /etc/apache2/httpd@example_web.org.conf
  4. Edit /etc/apache2/httpd@example_web.org.conf and change

    Include /etc/apache2/listen.conf

    to

    Include /etc/apache2/listen@example_web.org.conf

    Review all the directives and change them to fit your needs. You probably want to change

    Include /etc/apache2/global.conf

    and create new global@example_web.org.conf for each instance. We suggest to change

    ErrorLog /var/log/apache2/error_log

    to

    ErrorLog /var/log/apache2/error@example_web.org_log

    to have separate logs for each instance.

  5. Create /etc/apache2/listen@example_web.org.conf based on /etc/apache2/listen.conf.

    > sudo cp /etc/apache2/listen.conf /etc/apache2/listen@example_web.org.conf
  6. Edit /etc/apache2/listen@example_web.org.conf and change

    Listen 80

    to the port number you want the new instance to run on, for example 82:

    Listen 82

    To run the new Apache instance over a secured protocol (see Section 24.6, “Setting up a secure Web server with SSL”), change also the line

    Listen 443

    for example to

    Listen 445
  7. Start the new Apache instance:

    > sudo systemctl start apache2@example_web.org
  8. Check if the server is running by pointing your Web browser at http://server_name:82. If you previously changed the name of the error log file for the new instance, you can check it:

    > sudo tail -f /var/log/apache2/error@example_web.org_log

Here are several points to consider when setting up more Apache instances on the same server:

  • The file /etc/sysconfig/apache2@INSTANCE_NAME can include the same variables as /etc/sysconfig/apache2, including module loading and MPM setting.

  • The default Apache instance does not need to be running while other instances run.

  • The Apache helper utilities a2enmod, a2dismod and apachectl operate on the default Apache instance if not specified otherwise with the HTTPD_INSTANCE environment variable. The following example

    > sudo export HTTPD_INSTANCE=example_web.org
    > sudo a2enmod access_compat
    > sudo a2enmod status
    > sudo apachectl start

    will add access_compat and status modules to the APACHE_MODULES variable of /etc/sysconfig/apache2@example_web.org, and then start the example_web.org instance.

24.8 Avoiding security problems Edit source

A Web server exposed to the public Internet requires an ongoing administrative effort. It is inevitable that security issues appear, both related to the software and to accidental misconfiguration. Here are some tips for how to deal with them.

24.8.1 Up-to-date software Edit source

If there are vulnerabilities found in the Apache software, a security advisory will be issued by SUSE. It contains instructions for fixing the vulnerabilities, which in turn should be applied when possible. The SUSE security announcements are available from the following locations:

24.8.2 DocumentRoot permissions Edit source

By default in openSUSE Leap, the DocumentRoot directory /srv/www/htdocs and the CGI directory /srv/www/cgi-bin belong to the user and group root. You should not change these permissions. If the directories are writable for all, any user can place files into them. These files might then be executed by Apache with the permissions of wwwrun, which may give the user unintended access to file system resources. Use subdirectories of /srv/www to place the DocumentRoot and CGI directories for your virtual hosts and make sure that directories and files belong to user and group root.

24.8.3 File system access Edit source

By default, access to the whole file system is denied in /etc/apache2/httpd.conf. You should never overwrite these directives, but specifically enable access to all directories Apache should be able to read. For details, see Section 24.2.2.1.3, “Basic virtual host configuration”. In doing so, ensure that no critical files, such as password or system configuration files, can be read from the outside.

24.8.4 CGI scripts Edit source

Interactive scripts in PHP, SSI or any other programming language can run arbitrary commands and therefore present a general security issue. Scripts that will be executed from the server should only be installed from sources the server administrator trusts—allowing users to run their own scripts is generally not a good idea. It is also recommended to do security audits for all scripts.

To make the administration of scripts as easy as possible, it is common practice to limit the execution of CGI scripts to specific directories instead of globally allowing them. The directives ScriptAlias and Option ExecCGI are used for configuration. The openSUSE Leap default configuration does not allow execution of CGI scripts from everywhere.

All CGI scripts run as the same user, so different scripts can potentially conflict with each other. The module suEXEC lets you run CGI scripts under a different user and group.

24.8.5 User directories Edit source

When enabling user directories (with mod_userdir or mod_rewrite) you should strongly consider not allowing .htaccess files, which would allow users to overwrite security settings. At least you should limit the user's engagement by using the directive AllowOverRide. In openSUSE Leap, .htaccess files are enabled by default, but the user is not allowed to overwrite any Option directives when using mod_userdir (see the /etc/apache2/mod_userdir.conf configuration file).

24.9 Troubleshooting Edit source

If Apache does not start, the Web page is not accessible, or users cannot connect to the Web server, it is important to find the cause of the problem. Here are typical places to look for error explanations and important things to check:

Output of the apache2.service subcommand:

Instead of starting and stopping the Web server with the binary /usr/sbin/apache2ctl, rather use the systemctl commands instead (described in Section 24.3, “Starting and stopping Apache”). systemctl status apache2.service is verbose about errors, and it even provides tips and hints for fixing configuration errors.

Log files and verbosity

In case of both fatal and nonfatal errors, check the Apache log files for causes, mainly the error log file located at /var/log/apache2/error_log by default. Additionally, you can control the verbosity of the logged messages with the LogLevel directive if more detail is needed in the log files.

Tip
Tip: A simple test

Watch the Apache log messages with the command tail -F /var/log/apache2/MY_ERROR_LOG. Then run systemctl restart apache2.service. Now, try to connect with a browser and check the output.

Firewall and ports

A common mistake is to not open the ports for Apache in the firewall configuration of the server. If you configure Apache with YaST, there is a separate option available to take care of this specific issue (see Section 24.2.3, “Configuring Apache with YaST”). If you are configuring Apache manually, open firewall ports for HTTP and HTTPS via YaST's firewall module.

If the error cannot be tracked down with any of these, check the online Apache bug database at http://httpd.apache.org/bug_report.html. Additionally, the Apache user community can be reached via a mailing list available at http://httpd.apache.org/userslist.html.

24.10 More information Edit source

The package apache2-doc contains the complete Apache manual in multiple localizations for local installation and reference. It is not installed by default—the quickest way to install it is to use the command zypper in apache2-doc. Having been installed, the Apache manual is available at http://localhost/manual/. You may also access it on the Web at http://httpd.apache.org/docs-2.4/. SUSE-specific configuration hints are available in the directory /usr/share/doc/packages/apache2/README.*.

24.10.1 Apache 2.4 Edit source

For a list of new features in Apache 2.4, refer to http://httpd.apache.org/docs/2.4/new_features_2_4.html. Information about upgrading from version 2.2 to 2.4 is available at http://httpd.apache.org/docs-2.4/upgrading.html.

24.10.2 Apache modules Edit source

More information about external Apache modules that are briefly described in Section 24.4.5, “External modules” is available at the following locations:

mod_apparmor

https://en.opensuse.org/SDB:AppArmor

mod_php8

http://www.php.net/manual/en/install.unix.apache2.php

You can obtain detailed information about mod_php8 configuration in its well-commented main configuration file /etc/php8/apache2/php.ini.

mod_python

http://www.modpython.org/

mod_security

http://modsecurity.org/

24.10.3 Development Edit source

More information about developing Apache modules or about getting involved in the Apache Web server project are available at the following locations:

Apache developer information

http://httpd.apache.org/dev/

Apache developer documentation

http://httpd.apache.org/docs/2.4/developer/

25 Setting up an FTP server with YaST Edit source

Abstract

Using the YaST FTP Server module, you can configure your machine to function as an FTP (File Transfer Protocol) server. Anonymous and/or authenticated users can connect to your machine and download files using the FTP protocol. Depending on the configuration, they can also upload files to the FTP server. YaST uses vsftpd (Very Secure FTP Daemon).

If the YaST FTP Server module is not available in your system, install the yast2-ftp-server package. (For managing the FTP server from the command line, see Section 1.4.3.7, “yast ftp-server”.)

To configure the FTP server using YaST, follow these steps:

  1. Open the YaST control center and choose Network Services › FTP Server or run the yast2 ftp-server command as root.

  2. If there is not any FTP server installed in your system, you will be asked which server to install when the YaST FTP Server module starts. Choose the vsftpd server and confirm the dialog.

  3. In the Start-Up dialog, configure the options for starting of the FTP server. For more information, see Section 25.1, “Starting the FTP server”.

    In the General dialog, configure FTP directories, welcome message, file creation masks and other parameters. For more information, see Section 25.2, “FTP general settings”.

    In the Performance dialog, set the parameters that affect the load on the FTP server. For more information, see Section 25.3, “FTP performance settings”.

    In the Authentication dialog, set whether the FTP server should be available for anonymous and/or authenticated users. For more information, see Section 25.4, “Authentication”.

    In the Expert Settings dialog, configure the operation mode of the FTP server, SSL connections and firewall settings. For more information, see Section 25.5, “Expert settings”.

  4. Click Finish to save the configurations.

25.1 Starting the FTP server Edit source

In the Service Start frame of the FTP Start-Up dialog set the way the FTP server is started up. You can choose between starting the server automatically during the system boot and starting it manually. If the FTP server should be started only after an FTP connection request, choose Via socket.

The current status of the FTP server is shown in the Switch On and Off frame of the FTP Start-Up dialog. Start the FTP server by clicking Start FTP Now. To stop the server, click Stop FTP Now. After having changed the settings of the server click Save Settings and Restart FTP Now. Your configurations will be saved by leaving the configuration module with Finish.

FTP server configuration — start-up
Figure 25.1: FTP server configuration — start-up

25.2 FTP general settings Edit source

In the General Settings frame of the FTP General Settings dialog you can set the Welcome message which is shown after connecting to the FTP server.

If you check the Chroot Everyone option, all local users will be placed in a chroot jail in their home directory after login. This option has security implications, especially if the users have upload permission or shell access, so be careful enabling this option.

If you check the Verbose Logging option, all FTP requests and responses are logged.

You can limit permissions of files created by anonymous and/or authenticated users with umask. Set the file creation mask for anonymous users in Umask for Anonymous and the file creation mask for authenticated users in Umask for Authenticated Users. The masks should be entered as octal numbers with a leading zero. For more information about umask, see the umask man page (man 1p umask).

In the FTP Directories frame set the directories used for anonymous and authorized users. With Browse, you can select a directory to be used from the local file system. The default FTP directory for anonymous users is /srv/ftp. Note that vsftpd does not allow this directory to be writable for all users. The subdirectory upload with write permissions for anonymous users is created instead.

25.3 FTP performance settings Edit source

In the Performance dialog set the parameters which affect the load on the FTP server. Max Idle Time is the maximum time (in minutes) the remote client may spend between FTP commands. In case of longer inactivity, the remote client is disconnected. Max Clients for One IP determines the maximum number of clients which can be connected from a single IP address. Max Clients determines the maximum number of clients which may be connected. Any additional clients will get an error message.

The maximum data transfer rate (in KB/s) is set in Local Max Rate for local authenticated users, and in Anonymous Max Rate for anonymous clients respectively. The default value for the rate settings is 0, which means unlimited data transfer rate.

25.4 Authentication Edit source

In the Enable/Disable Anonymous and Local Users frame of the Authentication dialog, you can set which users are allowed to access your FTP server. You can choose between the following options: granting access to anonymous users only, to authenticated users only (with accounts on the system) or to both types of users.

To allow users to upload files to the FTP server, check Enable Upload in the Uploading frame of the Authentication dialog. Here you can allow uploading or creating directories even for anonymous users by checking the respective box.

Note
Note: vsftp—allowing file upload for anonymous users

If a vsftpd server is used and you want anonymous users to be able to upload files or create directories, a subdirectory with writing permissions for all users needs to be created in the anonymous FTP directory.

25.5 Expert settings Edit source

An FTP server can run in active or in passive mode. By default the server runs in passive mode. To switch into active mode, deselect the Enable Passive Mode option in the Expert Settings dialog. You can also change the range of ports on the server used for the data stream by tweaking the Min Port for Pas. Mode and Max Port for Pas. Mode options.

If you want encrypted communication between clients and the server, you can Enable SSL and, additionally, Enable TLS. Specify the RSA certificate to be used for SSL encrypted connections.

Important
Important

By default, new versions of the vsftpd daemon have the TLS protocol older than version 1.2 disabled. If you use an FTP client that requires an older version of the TLS protocol, you need to add the following configuration to the /etc/vsftpd.conf file:

ssl_tlsv1 = YES
ssl_tlsv1_1 = YES

Then restart the vsftpd daemon to reread the configuration:

> sudo systemctl restart vsftpd.service

If your system is protected by a firewall, check Open Port in Firewall to enable a connection to the FTP server.

25.6 More information Edit source

For more information about the FTP server read the manual pages of vsftpd and vsftpd.conf.

26 Squid caching proxy server Edit source

Abstract

Squid is a widely used caching proxy server for Linux and Unix platforms. This means that it stores requested Internet objects, such as data on a Web or FTP server, on a machine that is closer to the requesting workstation than the server. It can be set up in multiple hierarchies to assure optimal response times and low bandwidth usage, even in modes that are transparent to end users.

Squid acts as a caching proxy server. It redirects object requests from clients (in this case, from Web browsers) to the server. When the requested objects arrive from the server, it delivers the objects to the client and keeps a copy of them in the hard disk cache. An advantage of caching is that several clients requesting the same object can be served from the hard disk cache. This enables clients to receive the data much faster than from the Internet. This procedure also reduces the network traffic.

Along with actual caching, Squid offers a wide range of features:

  • Distributing load over intercommunicating hierarchies of proxy servers

  • Defining strict access control lists for all clients accessing the proxy server

  • Allowing or denying access to specific Web pages using other applications

  • Generating statistics about frequently visited Web pages for the assessment of surfing habits

Squid is not a generic proxy server. It normally proxies only HTTP connections. It supports the protocols FTP, Gopher, SSL and WAIS, but it does not support other Internet protocols, such as the news protocol, or video conferencing protocols. Because Squid only supports the UDP protocol to provide communication between different caches, many multimedia programs are not supported.

26.1 Some facts about proxy servers Edit source

As a caching proxy server, Squid can be used in several ways. When combined with a firewall, it can help with security. Multiple proxies can be used together. It can also determine what types of objects should be cached and for how long.

26.1.1 Squid and security Edit source

It is possible to use Squid together with a firewall to secure internal networks from the outside. The firewall denies all clients access to external services except Squid. All Web connections must be established by the proxy server. With this configuration, Squid fully controls Web access.

If the firewall configuration includes a demilitarized zone (DMZ), the proxy server should operate within this zone. Section 26.6, “Configuring a transparent proxy” describes how to implement a transparent proxy. This simplifies the configuration of the clients, because in this case, they do not need any information about the proxy server.

26.1.2 Multiple caches Edit source

Several instances of Squid can be configured to exchange objects between them. This reduces the total system load and increases the chances of retrieving an object from the local network. It is also possible to configure cache hierarchies, so a cache can forward object requests to sibling caches or to a parent cache—causing it to request objects from another cache in the local network, or directly from the source.

Choosing the appropriate topology for the cache hierarchy is important, because it is not desirable to increase the overall traffic on the network. For a very large network, it would make sense to configure a proxy server for every subnet and connect them to a parent proxy server, which in turn is connected to the caching proxy server of the ISP.

All this communication is handled by ICP (Internet cache protocol) running on top of the UDP protocol. Data transfers between caches are handled using HTTP (hypertext transmission protocol) based on TCP.

To find the most appropriate server from which to request objects, a cache sends an ICP request to all sibling proxies. The sibling proxies answer these requests via ICP responses. If the object was detected, they use the code HIT, if not, they use MISS.

If multiple HIT responses were found, the proxy server decides from which server to download, depending on factors such as which cache sent the fastest answer or which one is closer. If no satisfactory responses are received, the request is sent to the parent cache.

Note
Note: How Squid avoids duplication of objects

To avoid duplication of objects in different caches in the network, other ICP protocols are used, such as CARP (cache array routing protocol) or HTCP (hypertext cache protocol). The more objects maintained in the network, the greater the possibility of finding the desired object.

26.1.3 Caching Internet objects Edit source

Many objects available in the network are not static, such as dynamically generated pages and TLS/SSL-encrypted content. Objects like these are not cached because they change each time they are accessed.

To determine how long objects should remain in the cache, objects are assigned one of several states. Web and proxy servers find out the status of an object by adding headers to these objects, such as Last modified or Expires and the corresponding date. Other headers specifying that objects must not be cached can be used as well.

Objects in the cache are normally replaced, because of a lack of free disk space, using algorithms such as LRU (last recently used). This means that the proxy expunges those objects that have not been requested for the longest time.

26.2 System requirements Edit source

System requirements largely depend on the maximum network load that the system must bear. Therefore, examine load peaks, as during those times, load might be more than four times the day's average. When in doubt, slightly overestimate the system's requirements. Having Squid working close to the limit of its capabilities can lead to a severe loss in quality of service. The following sections point to system factors in order of significance:

  1. RAM size

  2. CPU speed/physical CPU cores

  3. Size of the disk cache

  4. Hard disks/SSDs and their architecture

26.2.1 RAM Edit source

The amount of memory (RAM) required by Squid directly correlates with the number of objects in the cache. Random access memory is much faster than a hard disk/SSD. Therefore, it is important to have sufficient memory for the Squid process, because system performance is dramatically reduced if the swap disk is used.

Squid also stores cache object references and frequently requested objects in the main memory to speed up retrieval of this data. In addition to that, there is other data that Squid needs to keep in memory, such as a table with all the IP addresses handled, an exact domain name cache, the most frequently requested objects, access control lists, buffers and more.

26.2.2 CPU Edit source

Squid is tuned to work best with lower processor core counts (4–8 physical cores), with each providing high performance. Technologies providing virtual cores such as hyperthreading can hurt performance.

To make the best use of multiple CPU cores, it is necessary to set up multiple worker threads writing to different caching devices. By default, multi-core support is mostly disabled.

26.2.3 Size of the disk cache Edit source

In a small cache, the probability of a HIT (finding the requested object already located there) is small, because the cache is easily filled and less requested objects are replaced by newer ones. If, for example, 1 GB is available for the cache and the users use up only 10 MB per day surfing, it would take more than one hundred days to fill the cache.

The easiest way to determine the necessary cache size is to consider the maximum transfer rate of the connection. With a 1 Mbit/s connection, the maximum transfer rate is 128 KB/s. If all this traffic ended up in the cache, in one hour it would add up to 460 MB. Assuming that all this traffic is generated in only eight working hours, it would reach 3.6 GB in one day. Because the connection is normally not used to its upper volume limit, it can be assumed that the total data volume handled by the cache is approximately 2 GB. Hence, in this example, 2 GB of disk space is required for Squid to keep one day's worth of browsing data cached.

26.2.4 Hard disk/SSD architecture Edit source

Speed plays an important role in the caching process, so this factor deserves special attention. For hard disks/SSDs, this parameter is described as random seek time or random read performance, measured in milliseconds. Because the data blocks that Squid reads from or writes to the hard disk/SSD tend to be small, the seek time/read performance of the hard disk/SSD is more important than its data throughput.

For use as a proxy server, hard disks with high rotation speeds or SSDs are the best choice. When using hard disks, it can be better to use multiple smaller hard disks, each with a single cache directory to avoid excessive read times.

Using a RAID system allows increasing reliability at expense of speed. However, for performance reasons, avoid (software) RAID5 and similar settings.

In most cases, the choice of file system choice does not matter. However, using the mount option noatime can improve performance—Squid provides its own time stamps, so it does not need the file system to track access times.

26.3 Basic usage of Squid Edit source

Since squid is not installed by default on openSUSE® Leap, make sure the package is installed on your system.

As Squid is preconfigured in openSUSE Leap, you can start it immediately after the installation. To avoid problems during the start-up, make sure that the network is connected to the Internet connection and has at least one name server. Using a dial-up connection with a dynamic DNS configuration may cause problems. In this case, specify at least the name server, as Squid does not start if it does not detect a DNS server in /var/run/netconfig/resolv.conf.

26.3.1 Starting Squid Edit source

To start Squid, run the following command:

> sudo systemctl start squid

To start Squid on system boot, enable the service with systemctl enable squid.

26.3.2 Checking whether Squid is working Edit source

There are several ways to check whether Squid is running:

  • Using systemctl:

    > systemctl status squid

    The output should indicate that Squid is loaded and active (running).

  • Using Squid itself:

    > sudo squid -k check | echo $?

    The output should be 0, but it can also contain additional messages, such as warnings.

To test the functionality of Squid on the local system, choose one of the following options:

  • Use squidclient, a command-line tool that outputs the response to a Web request, similar to wget or curl.

    Unlike wget or curl, squidclient automatically connects to the default proxy setup of Squid, localhost:3128. However, if you modified the configuration of Squid, you must configure squidclient accordingly. For more information, see squidclient --help.

    Example 26.1: A request with squidclient
    > squidclient http://www.example.org
    HTTP/1.1 200 OK
    Cache-Control: max-age=604800
    Content-Type: text/html
    Date: Fri, 22 Jun 2016 12:00:00 GMT
    Expires: Fri, 29 Jun 2016 12:00:00 GMT
    Last-Modified: Fri, 09 Aug 2013 23:54:35 GMT
    Server: ECS (iad/182A)
    Vary: Accept-Encoding
    X-Cache: HIT
    x-ec-custom-error: 1
    Content-Length: 1270
    X-Cache: MISS from moon1
    X-Cache-Lookup: MISS from moon:3128
    Via: 1.1 moon (squid/3.5.16)2
    Connection: close
    
    <!doctype html>
    <html>
    <head>
        <title>Example domain</title>
    [...]
    </body>
    </html>

    The output shown in Example 26.1, “A request with squidclient consists of two parts:

    1. The protocol headers of the response (the lines before the blank line).

    2. The actual content of the response (the lines after the blank line).

    To verify that Squid is used, refer to the selected header lines:

    1

    The value of the header X-Cache shows that the requested document was not in the Squid cache (MISS) of the computer moon.

    The example above contains two X-Cache lines. The first X-Cache header can be safely ignored, as it is produced by the internal caching software of the originating Web server.

    2

    The value of the header Via shows the HTTP version, the name of the computer, and the version of Squid in use.

  • Using a browser: Set up localhost as the proxy and 3128 as the port. Then load a page and check the response headers in the Network panel of the browser's Inspector or Developer Tools. The headers should be reproduced similarly to the way shown in Example 26.1, “A request with squidclient.

To allow users from the local system and other systems to access Squid and the Internet, change the entry in the configuration files /etc/squid/squid.conf from http_access deny all to http_access allow all. However, keep in mind that this makes Squid fully accessible to anyone. Therefore, define ACLs (access control lists) that control access to the proxy server. After modifying the configuration file, Squid must be reloaded or restarted. For more information on ACLs, see Section 26.5.2, “Options for access controls”.

If Squid stops working after a short period of time, check whether there is an incorrect name server entry or whether the /var/run/netconfig/resolv.conf file is missing. Squid logs the cause of a start-up failure in the file /var/log/squid/cache.log.

26.3.3 Stopping, reloading, and restarting Squid Edit source

There are two ways to reload Squid:

  • Using systemctl:

    > sudo systemctl reload squid

    or

    > sudo systemctl restart squid
  • Using YaST:

    In the Squid module, click the Save Settings and Restart Squid Now button.

To stop Squid, use one of the following options:

  • Using systemctl:

    > sudo systemctl stop squid
  • Using YaST

    In the Squid module click the Stop Squid Now. button.

Shutting down Squid can take a while, because Squid waits up to half a minute before dropping the connections to the clients and writing its data to the disk (see shutdown_lifetime option in /etc/squid/squid.conf),

Warning
Warning: Terminating Squid

Terminating Squid with kill or killall can damage the cache. To be able to restart Squid, damaged caches must be deleted.

26.3.4 Removing Squid Edit source

Removing Squid from the system does not remove the cache hierarchy and log files. To remove them, delete the /var/cache/squid directory manually.

26.3.5 Local DNS server Edit source

Setting up a local DNS server makes sense even if it does not manage its own domain. In that case, it acts as a caching-only name server, and it can also resolve DNS requests via the root name servers without requiring any special configuration (see Section 19.4, “Starting the BIND name server”). How this can be done depends on whether you chose dynamic DNS during the configuration of the Internet connection.

Dynamic DNS

Normally, with dynamic DNS, the DNS server is set by the provider when establishing the Internet connection and the local /var/run/netconfig/resolv.conf file is adjusted automatically. This behavior is specified in the /etc/sysconfig/network/config file using the NETCONFIG_DNS_POLICY sysconfig variable. Set NETCONFIG_DNS_POLICY to "" with the YaST sysconfig editor.

Then add the local DNS server in the /var/run/netconfig/resolv.conf file with the IP address 127.0.0.1 for localhost. This way, Squid can always find the local name server when it starts.

To make the provider's name server accessible, specify it in the configuration file /etc/named.conf under forwarders along with its IP address. With dynamic DNS, this can be done automatically when establishing the connection by setting the sysconfig variable NETCONFIG_DNS_POLICY to auto.

Static DNS

With static DNS, no automatic DNS adjustments take place while establishing a connection, so there is no need to change any sysconfig variables. However, you must specify the local DNS server in the file /var/run/netconfig/resolv.conf as described in Dynamic DNS. Additionally, the provider's static name server must be specified manually in the /etc/named.conf file under forwarders along with its IP address.

Tip
Tip: DNS and firewall

If you have a firewall running, make sure DNS requests can pass through it.

26.4 The YaST Squid module Edit source

The YaST Squid module contains the following tabs:

Start-Up

Specifies how Squid is started and which firewall port is open in which interfaces.

HTTP Ports

Define all ports for Squid to listen for HTTP requests from clients.

Refresh Patterns

Defines how Squid treats objects in the cache.

Cache Settings

Defines settings related to cache memory, maximum and minimum object size, and more.

Cache Directory

Defines the top-level directory for Squid to store cache swap files.

Access Control

Controls the access to the Squid server via ACL groups.

Logging and Timeout

Define paths to access, cache, and cache store log files and connection timeouts and client lifetime.

Miscellaneous

Specifies language and mail address of administrator.

26.5 The Squid configuration file Edit source

Squid proxy server settings are stored in the /etc/squid/squid.conf file. Although starting Squid for the first time does not require any changes to the file, external clients are initially denied access. The proxy is available for localhost. The default port is 3128. The preinstalled configuration file /etc/squid/squid.conf provides detailed information about the options and many examples.

Many entries are disabled using the comment character #. The relevant specifications can be found at the end of the line. The given values usually correlate with the default values, so removing the comment signs without changing any of the parameters usually has no effect. If possible, leave the commented lines as they are and insert the options along with the modified values in the line below. This way, the default values may easily be recovered and compared with the changes.

Tip
Tip: Adapting the configuration file after an update

If you have updated from an earlier Squid version, it is recommended to edit the new /etc/squid/squid.conf and only apply the changes made in the previous file.

Sometimes, Squid options are added, removed or modified. Therefore, if you try to use the old squid.conf, Squid might stop working properly.

26.5.1 General configuration options Edit source

The following is a list of a selection of configuration options for Squid. It is not exhaustive. The Squid package contains a full, lightly documented list of options in /etc/squid/squid.conf.documented.

http_port PORT

This is the port on which Squid listens for client requests. The default port is 3128, but 8080 is also common.

cache_peer HOST_NAME TYPE PROXY_PORT ICP_PORT

This option allows creating a network of caches that work together. The cache peer is a computer that also hosts a network cache and stands in a relationship to your own. The type of relationship is specified as the TYPE. The type can either be parent or sibling.

As the HOST_NAME, specify the name or IP address of the proxy server to use. For PROXY_PORT, specify the port number for use in a browser (usually 8080). Set ICP_PORT to 7 or, if the ICP port of the parent is not known and its use is irrelevant to the provider, to 0.

To make Squid behave like a Web browser instead of a proxy server, disable the use of the ICP protocol by appending the options default and no-query.

cache_mem SIZE

This option defines the amount of memory Squid can use for the most frequent replies. The default is 8 MB. This does not specify the memory usage of Squid and may be exceeded.

cache_dir STORAGE_TYPE CACHE_DIRECTORY CACHE_SIZE LEVEL_1_DIRECTORIES LEVEL_2_DIRECTORIES

The option cache_dir defines the directory for the disk cache. In the default configuration on openSUSE Leap, Squid does not create a disk cache.

The placeholder STORAGE_TYPE can be one of the following:

  • Directory-based storage types: ufs, aufs (the default), diskd. All three are variations of the storage format ufs. However, while ufs runs as part of the core Squid thread, aufs runs in a separate thread, and diskd uses a separate process. This means that the latter two types avoid blocking Squid because of disk I/O.

  • Database-based storage systems: rock. This storage format relies on a single database file, in which each object takes up one or more memory units of a fixed size (slots).

In the following, only the parameters for storage types based on ufs will be discussed. rock has different parameters.

The CACHE_DIRECTORY is the directory for the disk cache. By default, that is /var/cache/squid. CACHE_SIZE is the maximum size of that directory in megabytes; by default, this is set to 100 MB. Set it to between 50% and a maximum of 80% of available disk space.

The LEVEL_1_DIRECTORIES and LEVEL_2_DIRECTORIES values specify how many subdirectories are created in the CACHE_DIRECTORY. By default, 16 subdirectories are created at the first level below CACHE_DIRECTORY and 256 within each of these. These values should only be increased with caution, because creating too many directories can lead to performance problems.

If you have several disks that share a cache, specify several cache_dir lines.

cache_access_log LOG_FILE, cache_log LOG_FILE, cache_store_log LOG_FILE

These three options specify the paths where Squid logs all its actions. Normally, nothing needs to be changed here. If Squid is under heavy load, it might make sense to distribute the cache and the log files over several disks.

client_netmask NETMASK

This option allows masking IP addresses of clients in the log files by applying a subnet mask. For example, to set the last digit of the IP address to 0, specify 255.255.255.0.

ftp_user E-MAIL

This option allows setting the password that Squid should use for anonymous FTP login. Specify a valid e-mail address here, as some FTP servers check these for validity.

cache_mgr E-MAIL

When Squid crashes, it sends a message to the specified e-mail address. The default is webmaster.

logfile_rotate VALUE

When used with squid -k rotate, squid rotates log files. The files are numbered and, after reaching the specified value, the oldest file is overwritten. The default value is 10 which rotates log files with the numbers 0 to 9.

However, on openSUSE Leap, rotating log files is performed automatically using logrotate and the configuration file /etc/logrotate.d/squid.

append_domain DOMAIN

Use append_domain to specify which domain to append automatically when none is given. Usually, your own domain is specified here, so pointing the browser to www navigates to your own Web server.

forwarded_for STATE

If this option is set to on, it adds a line to the header similar to this:

X-Forwarded-For: 192.168.0.1

If you set this option to off, Squid removes the IP address and the system name of the client from HTTP requests.

negative_ttl TIME, negative_dns_ttl TIME

If these options are configured, Squid caches certain types of failures, such as 404 responses. It then refuses to issue new requests, even if the resource becomes available.

By default, negative_ttl is set to 0, negative_dns_ttl is set to 1 minutes. This means that negative responses to Web requests are not cached by default, while negative responses to DNS requests are cached for 1 minute.

never_direct allow ACL_NAME

To prevent Squid from accepting requests directly from the Internet, use the option never_direct to force connection to another proxy server. This must have previously been specified in cache_peer. If all is specified as the ACL_NAME, all requests are forwarded directly to the parent. This can be necessary, for example, if you are using a provider that dictates the use of its proxies or denies its firewall direct Internet access.

26.5.2 Options for access controls Edit source

Squid can control the access to the proxy server through Access Control Lists (ACL), lists with rules that are processed sequentially. ACLs must be defined before they can be used. Squid includes default ACLs, such as all and localhost. However, for an ACL to take effect, it must have a corresponding http_access rule.

The syntax for the option acl is as follows:

acl ACL_NAME TYPE DATA

The placeholders within this syntax stand for the following:

  • ACL_NAME can be any name.

  • For TYPE, select from the options available in the ACCESS CONTROLS section of the /etc/squid/squid.conf file.

  • The specification for DATA depends on the individual ACL type, for example host names, IP addresses, or URLs.

To add rules in the YaST Squid module, open the module and click the Access Control tab. Click Add under the ACL Groups list and enter the name of your rule, the type, and its parameters.

For more information on types of ACL rules, see the Squid documentation at http://www.squid-cache.org/Versions/v3/3.5/cfgman/acl.html.

Example 26.2: Defining ACL rules
acl mysurfers srcdomain .example.com 1
acl teachers src 192.168.1.0/255.255.255.0 2
acl students src 192.168.7.0-192.168.9.0/255.255.255.0 3
acl lunch time MTWHF 12:00-15:00 4

1

This ACL defines mysurfers as all users coming from within .example.com (as determined by a reverse lookup for the IP).

2

This ACL defines teachers as the users of computers with IP addresses starting with 192.168.1..

3

This ACL defines students as the users of the computer with IP addresses starting with 192.168.7., 192.168.8., or 192.168.9..

4

This ACL defines lunch as a time on the days Monday through Friday between noon and 3 p.m.

http_access allow ACL_NAME

http_access defines who is allowed to use the proxy server and who can access what on the Internet. You need to define ACLs for this. The localhost and all ACLs have already been defined above, and you can deny or allow access to them via deny or allow. A list containing any number of http_access entries can be created, processed from top to bottom. Depending on which occurs first, access is allowed or denied to the respective URL. The last entry should always be http_access deny all. In the following example, localhost has free access to everything, while all other hosts are denied access:

http_access allow localhost
http_access deny all

In another example using these rules, the group teachers always has access to the Internet. The group students only has access between Monday and Friday during lunch time:

http_access deny localhost
http_access allow teachers
http_access allow students lunch time
http_access deny all

For better readability, specify all http_access options as a block in the configuration file /etc/squid/squid.conf.

url_rewrite_program PATH

Use this option to specify a URL rewriter.

auth_param basic program PATH

If users must be authenticated on the proxy server, set a corresponding program, such as /usr/sbin/pam_auth. When accessing pam_auth for the first time, the user is prompted to provide a user name and a password. In addition to that, you need an ACL, so only clients with a valid login can use the Internet:

acl password proxy_auth REQUIRED

http_access allow password
http_access deny all

In the acl proxy_auth option, using REQUIRED means that all valid user names are accepted. REQUIRED can also be replaced with a list of permitted user names.

ident_lookup_access allow ACL_NAME

Use this option to enable an ident request action to find each user's identity for all clients defined by an ACL of the type src. To enable this for all clients, apply the predefined ACL all as the ACL_NAME.

All clients specified by ident_lookup_access must run an ident daemon. On Linux, you can use pidentd (package pidentd) as the ident daemon. To ensure that only clients with a successful ident lookup are permitted, define a corresponding ACL:

acl identhosts ident REQUIRED

http_access allow identhosts
http_access deny all

Setting the acl identhosts ident option to REQUIRED ensures that all valid user names are accepted. REQUIRED can also be replaced with a list of permitted user names.

Using ident can slow down access time, because ident lookups are repeated for each request.

26.6 Configuring a transparent proxy Edit source

A transparent proxy intercepts and answers the requests of the Web browser, so the Web browser receives the requested pages without knowing where they are coming from. As the name indicates, the entire process is transparent to the user.

The standard way of working with proxy servers is as follows: the Web browser sends requests to a certain port of the proxy server and the proxy always provides these required objects, regardless of whether they are in its cache. However, in the following cases using the transparent proxy mode of Squid makes sense:

  • When for security reasons it is desirable for all clients to use a proxy server to access the Internet.

  • When all clients must use a proxy server, regardless of whether they are aware of it.

  • When the proxy server in a network is moved, but the existing clients need to retain their old configuration.

Procedure 26.1: Squid as a transparent proxy server (command line)
  1. In /etc/squid/squid.conf, add the parameter transparent to the line http_port. You should then have 2 lines:

    http_port 3128⎄
    http_port 3128 transparent
  2. Restart Squid:

    > sudo systemctl restart squid
  3. Set up the firewall to redirect HTTP traffic to the port given in http_proxy (in the example above, it is port 3128). Then reload the firewall configuration. This assumes that the zone internal is assigned to your LAN interface.

    > sudo firewall-cmd --permanent --zone=internal \
        --add-forward-port=port=80:proto=tcp:toport=3128:toaddr=LAN_IP
    > sudo firewall-cmd --permanent --zone=internal --add-port=3128/tcp
    > sudo firewall-cmd --reload

    Replace LAN_IP with the IP address of your LAN interface or the interface Squid is listening on.

  4. To verify that everything is working properly, check the Squid log files in /var/log/squid/access.log.

26.7 Using the Squid cache manager CGI interface (cachemgr.cgi) Edit source

The Squid cache manager CGI interface (cachemgr.cgi) is a CGI utility for displaying statistics about the memory usage of a running Squid process. It also provides a convenient way to manage the cache and view statistics without logging the server.

Procedure 26.2: Setting up cachemgr.cgi
  1. Make sure the Apache Web server is running on your system. Configure Apache as described in Chapter 24, The Apache HTTP server. In particular, see Section 24.5, “Enabling CGI scripts”. To check whether Apache is already running, use:

    > sudo systemctl status apache2

    If the status is inactive, start Apache with the openSUSE Leap default settings:

    > sudo systemctl start apache2
  2. Now enable cachemgr.cgi in Apache. To do this, create a configuration file for a ScriptAlias.

    Create the file in the directory /etc/apache2/conf.d and name it cachemgr.conf. Add the following to the file:

    ScriptAlias /squid/cgi-bin/ /usr/lib64/squid/
    
    <Directory "/usr/lib64/squid/">
    Options +ExecCGI
    AddHandler cgi-script .cgi
    Require host HOST_NAME
    </Directory>

    Replace HOST_NAME with the host name of the computer you want to access cachemgr.cgi from. This allows only your computer to access cachemgr.cgi. To allow access from anywhere, use Require all granted instead.

    • If Squid and the Apache Web server run on the same computer, the /etc/squid/squid.conf configuration file requires no modifications. However, verify that the file contains the following lines:

      http_access allow manager localhost
      http_access deny manager

      This allows you to access the manager interface from your computer (localhost) only.

    • If Squid and the Apache Web server run on different computers, you need to add extra rules to allow access from the CGI script to Squid. Define an ACL for the server (replace WEB_SERVER_IP with the IP address of the Web server):

      acl webserver src WEB_SERVER_IP/255.255.255.255

      Make sure the following rules are in the configuration file. Keep in mind that the order is important.

      http_access allow manager localhost
      http_access allow manager webserver
      http_access deny manager
  3. (Optional) Optionally, you can configure one or more passwords for cachemgr.cgi. This also gives you access to more actions such as closing the cache remotely or viewing more information about the cache. To enable access, configure the options cache_mgr and cachemgr_passwd with one or more password for the manager and a list of allowed actions.

    The following example configuration enables viewing the index page, the menu, and 60-minute average of counters without authentication. The configuration also enables toggling offline mode using the password secretpassword and to disable everything else.

    cache_mgr user
    cachemgr_passwd none index menu 60min
    cachemgr_passwd secretpassword offline_toggle
    cachemgr_passwd disable all

    cache_mgr defines a user name. cache_mgr defines which actions are allowed using which password.

    The keywords none and disable are special: none removes the need for a password, disable disables functionality outright.

    The full list of actions can be best seen after logging in to cachemgr.cgi. To find out how the operation needs to be referenced in the configuration file, see the string after &operation= in the URL of the action page. all is a special keyword meaning all actions.

  4. Reload Squid and Apache to enable the changes:

    > sudo systemctl reload squid
  5. To view the statistics, go to the cachemgr.cgi page that you set up before. For example, it could be http://webserver.example.org/squid/cgi-bin/cachemgr.cgi.

    Choose the right server. If a user name and password are configured, specify them. Click Continue and browse through the available statistics.

26.8 Cache report generation with Calamaris Edit source

Calamaris is a Perl script for generating reports of cache activity in ASCII or HTML format. It works with native Squid access log files. This tool does not belong to the openSUSE Leap default installation scope—to use it, install the calamaris package. Further info on Calamaris is available at http://cord.de/calamaris-english.

Log in as root, then enter:

# cat access1.log [access2.log access3.log] | calamaris OPTIONS > reportfile

When using more than one log file, make sure they are ordered chronologically, with older files listed first. This can be done either by listing the files one after the other as in the example above or by using access{1..3}.log.

calamaris accepts the following options:

-a

output all available reports

-w

output as HTML report

-l

include a message or logo in report header

Further information about options can be found in the program's manual page with man calamaris.

A typical example is:

# cat access.log.{10..1} access.log | calamaris -a -w \
> /usr/local/httpd/htdocs/Squid/squidreport.html

This saves the report in the directory of the Web server. Apache is required to view the reports.

26.9 More Information Edit source

Visit the home page of Squid at http://www.squid-cache.org/. Here, find the Squid User Guide and a very extensive collection of FAQs on Squid.

In addition, mailing lists are available for Squid at http://www.squid-cache.org/Support/mailing-lists.html.

Part IV Mobile computers Edit source

27 Mobile computing with Linux

Mobile computing is mostly associated with laptops, PDAs and cellular phones (and the data exchange between them). Mobile hardware components, such as external hard disks, flash disks, or digital cameras, can be connected to laptops or desktop systems. A number of software components are involved in mobile computing scenarios and some applications are tailor-made for mobile use.

28 Using NetworkManager

NetworkManager is the ideal solution for laptops and other portable computers. It supports state-of-the-art encryption types and standards for network connections, including connections to 802.1X protected networks. 802.1X is the “IEEE Standard for Local and Metropolitan Area Networks—Port-Based Net…

29 Power management

Power management is especially important on laptop computers, but is also useful on other systems. ACPI (Advanced Configuration and Power Interface) is available on all modern computers (laptops, desktops and servers). Power management technologies require suitable hardware and BIOS routines. Most l…

27 Mobile computing with Linux Edit source

Abstract

Mobile computing is mostly associated with laptops, PDAs and cellular phones (and the data exchange between them). Mobile hardware components, such as external hard disks, flash disks, or digital cameras, can be connected to laptops or desktop systems. A number of software components are involved in mobile computing scenarios and some applications are tailor-made for mobile use.

27.1 Laptops Edit source

The hardware of laptops differs from that of a normal desktop system. This is because criteria like exchangeability, space requirements and power consumption must be taken into account. The manufacturers of mobile hardware have developed standard interfaces like Mini PCI and Mini PCIe that can be used to extend the hardware of laptops. The standards cover memory cards, network interface cards, and external hard disks.

27.1.1 Power conservation Edit source

The inclusion of energy-optimized system components during laptop manufacturing contributes to their suitability for use without access to the electrical power grid. Their contribution to conservation of power is at least as important as that of the operating system. openSUSE® Leap supports various methods that control the power consumption of a laptop and have varying effects on the operating time under battery power. The following list is in descending order of contribution to power conservation:

  • Throttling the CPU speed.

  • Switching off the display illumination during pauses.

  • Manually adjusting the display illumination.

  • Disconnecting unused, hotplug-enabled accessories (USB CD-ROM, external mouse, Wi-Fi, etc.).

  • Spinning down the hard disk when idling.

Detailed background information about power management in openSUSE Leap is provided in Chapter 29, Power management.

27.1.2 Integration in changing operating environments Edit source

Your system needs to adapt to changing operating environments when used for mobile computing. Many services depend on the environment and the underlying clients must be reconfigured. openSUSE Leap handles this task for you.

Integrating a mobile computer in an existing environment
Figure 27.1: Integrating a mobile computer in an existing environment

The services affected in the case of a laptop commuting back and forth between a small home network and an office network are:

Network

This includes IP address assignment, name resolution, Internet connectivity and connectivity to other networks.

Printing

A current database of available printers and an available print server must be present, depending on the network.

E-mail and proxies

As with printing, the list of the corresponding servers must be current.

X (graphical environment)

If your laptop is temporarily connected to a projector or an external monitor, different display configurations must be available.

openSUSE Leap offers several ways of integrating laptops into existing operating environments:

NetworkManager

NetworkManager is designed for mobile networking on laptops. It provides a means to easily and automatically switch between network environments or different types of networks such as mobile broadband (such as GPRS, EDGE, or 3G), wireless LAN, and Ethernet. NetworkManager supports WEP and WPA-PSK encryption in wireless LANs. It also supports dial-up connections. The GNOME desktop includes a front-end for NetworkManager. For more information, see Section 28.3, “Configuring network connections”.

Table 27.1: Use cases for NetworkManager

My computer…

Use NetworkManager

is a laptop

Yes

is sometimes attached to different networks

Yes

provides network services (such as DNS or DHCP)

No

only uses a static IP address

No

Use the YaST tools to configure networking whenever NetworkManager should not handle network configuration.

Tip
Tip: DNS configuration and various types of network connections

If you travel frequently with your laptop and change different types of network connections, NetworkManager works fine when all DNS addresses are assigned correctly assigned with DHCP. If some connections use static DNS address(es), add it to the NETCONFIG_DNS_STATIC_SERVERS option in /etc/sysconfig/network/config.

SLP

The service location protocol (SLP) simplifies the connection of a laptop to an existing network. Without SLP, the administrator of a laptop usually requires detailed knowledge of the services available in a network. SLP broadcasts the availability of a certain type of service to all clients in a local network. Applications that support SLP can process the information dispatched by SLP and be configured automatically. SLP can also be used to install a system, minimizing the effort of searching for a suitable installation source. Find detailed information about SLP in Chapter 17, SLP.

27.1.3 Software options Edit source

There are various task areas in mobile use that are covered by dedicated software: system monitoring (especially the battery charge), data synchronization, and wireless communication with peripherals and the Internet. The following sections cover the most important applications that openSUSE Leap provides for each task.

27.1.3.1 System monitoring Edit source

Two system monitoring tools are provided by openSUSE Leap:

Power management

Power Management is an application that lets you adjust the energy saving related behavior of the GNOME desktop. You can typically access it via Computer › Control Center › System › Power Management.

System monitor

The System Monitor gathers measurable system parameters into one monitoring environment. It presents the output information in three tabs by default. Processes gives detailed information about currently running processes, such as CPU load, memory usage, or process ID number and priority. The presentation and filtering of the collected data can be customized—to add a new type of process information, left-click the process table header and choose which column to hide or add to the view. It is also possible to monitor different system parameters in various data pages or collect the data of various machines in parallel over the network. The Resources tab shows graphs of CPU, memory and network history and the File System tab lists all partitions and their usage.

27.1.3.2 Synchronizing data Edit source

When switching between working on a mobile machine disconnected from the network and working at a networked workstation in an office, it is necessary to keep processed data synchronized across all instances. This could include e-mail folders, directories and individual files that need to be present for work on the road and at the office. The solution in both cases is as follows:

Synchronizing e-mail

Use an IMAP account for storing your e-mails in the office network. Then access the e-mails from the workstation using any disconnected IMAP-enabled e-mail client, like Mozilla Thunderbird or Evolution as described in Book “GNOME User Guide. The e-mail client must be configured so that the same folder is always accessed for Sent messages. This ensures that all messages are available along with their status information after the synchronization process has completed. Use an SMTP server implemented in the mail client for sending messages instead of the system-wide MTA postfix or sendmail to receive reliable feedback about unsent mail.

Synchronizing files and directories

There are several utilities suitable for synchronizing data between a laptop and a workstation. One of the most widely used is a command-line tool called rsync. For more information, see its manual page (man 1 rsync).

27.1.3.3 Wireless communication: Wi-Fi Edit source

With the largest range of these wireless technologies, Wi-Fi is the only one suitable for the operation of large and sometimes even spatially separate networks. Single machines can connect with each other to form an independent wireless network or access the Internet. Devices called access points act as base stations for Wi-Fi-enabled devices and act as intermediaries for access to the Internet. A mobile user can switch among access points depending on location and which access point is offering the best connection. Like in cellular telephony, a large network is available to Wi-Fi users without binding them to a specific location for accessing it.

Wi-Fi cards communicate using the 802.11 standard, prepared by the IEEE organization. Originally, this standard provided for a maximum transmission rate of 2 Mbit/s. Meanwhile, several supplements have been added to increase the data rate. These supplements define details such as the modulation, transmission output, and transmission rates (see Table 27.2, “Overview of various Wi-Fi standards”). Additionally, many companies implement hardware with proprietary or draft features.

Table 27.2: Overview of various Wi-Fi standards

Name (802.11)

Frequency (GHz)

Maximum Transmission Rate (Mbit/s)

Note

a

5

54

Less interference-prone

b

2.4

11

Less common

g

2.4

54

Widespread, backward-compatible with 11b

n

2.4 and/or 5

300

Common

ac

5

up to ~865

Expected to be common in 2015

ad

60

up to appr. 7000

Released 2012, currently less common; not supported in openSUSE Leap

802.11 Legacy cards are not supported by openSUSE® Leap. Most cards using 802.11 a/b/g/n are supported. New cards usually comply with the 802.11n standard, but cards using 802.11g are still available.

27.1.3.3.1 Operating modes Edit source

In wireless networking, various techniques and configurations are used to ensure fast, high-quality, and secure connections. Usually your Wi-Fi card operates in managed mode. However, different operating types need different setups. Wireless networks can be classified into four network modes:

Managed mode (infrastructure mode), via access point (default mode)

Managed networks have a managing element: the access point. In this mode (also called infrastructure or default mode), all connections of the Wi-Fi stations in the network run through the access point, which may also serve as a connection to an Ethernet. To make sure only authorized stations can connect, various authentication mechanisms (WPA, etc.) are used. This is also the main mode that consumes the least amount of energy.

Ad-hoc mode (peer-to-peer network)

Ad-hoc networks do not have an access point. The stations communicate directly with each other, therefore an ad-hoc network is usually slower than a managed network. However, the transmission range and number of participating stations are greatly limited in ad-hoc networks. They also do not support WPA authentication. Additionally, not all cards support ad-hoc mode reliably.

Master mode

In master mode, your Wi-Fi card is used as the access point, assuming your card supports this mode. Find out the details of your Wi-Fi card at http://linux-wless.passys.nl.

Mesh mode

Wireless mesh networks are organized in a mesh topology. A wireless mesh network's connection is spread among all wireless mesh nodes. Each node belonging to this network is connected to other nodes to share the connection, possibly over a large area.

27.1.3.3.2 Authentication Edit source

Because a wireless network is much easier to intercept and compromise than a wired network, the various standards include authentication and encryption methods.

Old Wi-Fi cards support only WEP (Wired Equivalent Privacy). However, because WEP has proven to be insecure, the Wi-Fi industry has defined an extension called WPA, which is supposed to eliminate the weaknesses of WEP. WPA, sometimes synonymous with WPA2, should be the default authentication method.

Usually the user cannot choose the authentication method. For example, when a card operates in managed mode the authentication is set by the access point. NetworkManager shows the authentication method.

27.1.3.3.3 Encryption Edit source

There are various encryption methods to ensure that no unauthorized person can read the data packets that are exchanged in a wireless network or gain access to the network:

WEP (defined in IEEE 802.11)

This standard uses the RC4 encryption algorithm, originally with a key length of 40 bits, later also with 104 bits. Often, the length is declared as 64 bits or 128 bits, depending on whether the 24 bits of the initialization vector are included. However, this standard has some weaknesses. Attacks against the keys generated by this system may be successful. Nevertheless, it is better to use WEP than not to encrypt the network.

Some vendors have implemented the non-standard Dynamic WEP. It works exactly as WEP and shares the same weaknesses, except that the key is periodically changed by a key management service.

TKIP (defined in WPA/IEEE 802.11i)

This key management protocol defined in the WPA standard uses the same encryption algorithm as WEP, but eliminates its weakness. Because a new key is generated for every data packet, attacks against these keys are fruitless. TKIP is used together with WPA-PSK.

CCMP (defined in IEEE 802.11i)

CCMP describes the key management. Usually, it is used in connection with WPA-EAP, but it can also be used with WPA-PSK. The encryption takes place according to AES and is stronger than the RC4 encryption of the WEP standard.

27.1.3.4 Wireless communication: Bluetooth Edit source

Bluetooth has the broadest application spectrum of all wireless technologies. It can be used for communication between computers (laptops) and PDAs or cellular phones, as can IrDA. It can also be used to connect various computers within range. Bluetooth is also used to connect wireless system components, like a keyboard or a mouse. The range of this technology is, however, not sufficient to connect remote systems to a network. Wi-Fi is the technology of choice for communicating through physical obstacles like walls.

27.1.3.5 Wireless communication: IrDA Edit source

IrDA is the wireless technology with the shortest range. Both communication parties must be within viewing distance of each other. Obstacles like walls cannot be overcome. One possible application of IrDA is the transmission of a file from a laptop to a cellular phone. The short path from the laptop to the cellular phone is then covered using IrDA. Long-range transmission of the file to the recipient is handled by the mobile network. Another application of IrDA is the wireless transmission of printing jobs in the office.

27.1.4 Data security Edit source

Ideally, you protect data on your laptop against unauthorized access in multiple ways. Possible security measures can be taken in the following areas:

Protection against theft

Always physically secure your system against theft whenever possible. Various securing tools (like chains) are available in retail stores.

Strong authentication

Use biometric authentication in addition to standard authentication via login and password. openSUSE Leap supports fingerprint authentication.

Securing data on the system

Important data should not only be encrypted during transmission, but also on the hard disk. This ensures its safety in case of theft. The creation of an encrypted partition with openSUSE Leap is described in Book “Security and Hardening Guide”, Chapter 12 “Encrypting partitions and files”. Another possibility is to create encrypted home directories when adding the user with YaST.

Important
Important: Data security and suspend to disk

Encrypted partitions are not unmounted during a suspend to disk event. Thus, all data on these partitions is available to any party who manages to steal the hardware and issue a resume of the hard disk.

Network security

Any transfer of data should be secured, no matter how the transfer is done. Find general security issues regarding Linux and networks in Book “Security and Hardening Guide”, Chapter 1 “Security and confidentiality”.

27.2 Mobile hardware Edit source

openSUSE Leap supports the automatic detection of mobile storage devices over FireWire (IEEE 1394) or USB. The term mobile storage device applies to any kind of FireWire or USB hard disk, flash disk, or digital camera. These devices are automatically detected and configured when they are connected with the system over the corresponding interface. The file manager of GNOME offers flexible handling of mobile hardware items. To unmount any of these media safely, use the Unmount Volume (GNOME) feature of the file manager. For more details refer to Book “GNOME User Guide.

External hard disks (USB and FireWire)

When an external hard disk is correctly recognized by the system, its icon appears in the file manager. Clicking the icon displays the contents of the drive. It is possible to create directories and files here and edit or delete them. To rename a hard disk, select the corresponding menu item from the right-click contextual menu. This name change is limited to display in the file manager. The descriptor by which the device is mounted in /media remains unaffected.

USB Flash Drives

These devices are handled by the system like external hard disks. It is similarly possible to rename the entries in the file manager.

Digital cameras (USB and FireWire)

Digital cameras recognized by the system also appear as external drives in the overview of the file manager. The images can then be processed using the default image editor. For advanced photo processing use The GIMP. For a short introduction to The GIMP, see Book “GNOME User Guide”, Chapter 17 “GIMP: manipulating graphics”.

27.3 Mobile devices (smartphones and tablets) Edit source

A desktop system or a laptop can communicate with mobile devices via Bluetooth, Wi-Fi, or a direct USB connection. Choosing a connection method depends on your mobile device model and your specific needs. Connecting a mobile device to a desktop machine or laptop via USB usually makes it possible to work with the device as conventional external storage. Setting up a Bluetooth or Wi-Fi connection allows you to interact with the mobile device and control its functions directly from your desktop machine or laptop. There are several open-source graphical utilities you can use to control the connected mobile device (notably KDE Connect and GSConnect).

28 Using NetworkManager Edit source

NetworkManager is the ideal solution for laptops and other portable computers. It supports state-of-the-art encryption types and standards for network connections, including connections to 802.1X protected networks. 802.1X is the IEEE Standard for Local and Metropolitan Area Networks—Port-Based Network Access Control. With NetworkManager, you need not worry about configuring network interfaces and switching between wired or wireless networks when you are on the move. NetworkManager can automatically connect to known wireless networks or manage several network connections in parallel—the fastest connection is then used as default. Furthermore, you can manually switch between available networks and manage your network connection using an applet in the system tray.

Instead of only one connection being active, multiple connections may be active at once. This enables you to unplug your laptop from an Ethernet and remain connected via a wireless connection.

28.1 Use cases for NetworkManager Edit source

NetworkManager provides a sophisticated and intuitive user interface, which enables users to easily switch their network environment. However, NetworkManager is not a suitable solution in the following cases:

  • Your computer provides network services for other computers in your network, for example, it is a DHCP or DNS server.

  • Your computer is a Xen server or your system is a virtual system inside Xen.

28.2 Enabling or disabling NetworkManager Edit source

On desktop and laptop computers, NetworkManager is enabled by default. You can disable and enable it at any time using the Network Settings module in YaST.

  1. Run YaST and go to System › Network Settings.

  2. The Network Settings dialog opens. Go to the Global Options tab.

  3. To configure and manage your network connections with NetworkManager:

    1. In the Network Setup Method field, select User Controlled with NetworkManager.

    2. Click OK and close YaST.

    3. Configure your network connections with NetworkManager as described in Section 28.3, “Configuring network connections”.

  4. To deactivate NetworkManager and control the network with your own configuration:

    1. In the Network Setup Method field, choose Controlled by wicked.

    2. Click OK.

    3. Set up your network card with YaST using automatic configuration via DHCP or a static external IP address.

      Find a detailed description of the network configuration with YaST in Section 13.4, “Configuring a network connection with YaST”.

28.3 Configuring network connections Edit source

After enabling NetworkManager in YaST, configure your network connections with the NetworkManager front-end available in GNOME. It shows tabs for all types of network connections, such as wired, wireless, mobile broadband, DSL and VPN connections.

Tip
Tip: NetworkManager connection editor

In previous openSUSE Leap releases, network connections were configured using an application called NetworkManager Connection Editor. This is no longer installed by default, because GNOME Control Center has fully replaced its configuration capabilities.

If you still need to use NetworkManager Connection Editor to configure network connections, install the NetworkManager-connection-editor package manually:

> sudo zypper install NetworkManager-connection-editor

To open the network configuration dialog in GNOME, open the settings menu via the status menu and click the Network entry.

Note
Note: Availability of options

Depending on your system setup, you may not be allowed to configure connections. In a secured environment, some options may be locked or require root permission. Ask your system administrator for details.

GNOME Network Connections dialog
Figure 28.1: GNOME Network Connections dialog
Procedure 28.1: Adding and editing connections
  1. Open the NetworkManager configuration dialog.

  2. To add a Connection:

    1. Click the + icon in the lower left corner.

    2. Select your preferred connection type and follow the instructions.

    3. When you are finished click Add.

    4. After confirming your changes, the newly-configured network connection appears in the list of available networks in the Status Menu.

  3. To edit a connection:

    1. Select the entry to edit.

    2. Click the gear icon to open the Connection Settings dialog.

    3. Insert your changes and click Apply to save them.

    4. To make your connection available as a system connection go to the Identity tab and set the check box Make available to other users. For more information about user and system connections, see Section 28.4.1, “User and system connections”.

28.3.1 Managing wired network connections Edit source

If your computer is connected to a wired network, use the NetworkManager applet to manage the connection.

  1. Open the Status Menu and click Wired to change the connection details or to switch it off.

  2. To change the settings click Wired Settings and then click the gear icon.

  3. To switch off all network connections, activate the Airplane Mode setting.

28.3.2 Managing wireless network connections Edit source

Visible wireless networks are listed in the GNOME NetworkManager applet menu under Wireless Networks. The signal strength of each network is also shown in the menu. Encrypted wireless networks are marked with a shield icon.

Procedure 28.2: Connecting to a visible wireless network
  1. To connect to a visible wireless network, open the Status Menu and click Wi-Fi.

  2. Click Turn On to enable it.

  3. Click Select Network, select your Wi-Fi Network and click Connect.

  4. If the network is encrypted, a configuration dialog opens. It shows the type of encryption the network uses and text boxes for entering the login credentials.

Procedure 28.3: Connecting to an invisible wireless network
  1. To connect to a network that does not broadcast its service set identifier (SSID or ESSID) and therefore cannot be detected automatically, open the Status Menu and click Wi-Fi.

  2. Click Wi-Fi Settings to open the detailed settings menu.

  3. Make sure your Wi-Fi is enabled and click Connect to Hidden Network.

  4. In the dialog that opens, enter the SSID or ESSID in Network Name and set encryption parameters if necessary.

A wireless network that has been chosen explicitly will remain connected as long as possible. If a network cable is plugged in during that time, any connections that have been set to Stay connected when possible will be connected, while the wireless connection remains up.

28.3.3 Configuring your Wi-Fi/Bluetooth card as an access point Edit source

If your Wi-Fi/Bluetooth card supports access point mode, you can use NetworkManager for the configuration.

  1. Open the Status Menu and click Wi-Fi.

  2. Click Wi-Fi Settings to open the detailed settings menu.

  3. Click Use as Hotspot and follow the instructions.

  4. Use the credentials shown in the resulting dialog to connect to the hotspot from a remote machine.

28.3.4 NetworkManager and VPN Edit source

NetworkManager supports several Virtual Private Network (VPN) technologies. For each technology, openSUSE Leap comes with a base package providing the generic support for NetworkManager. In addition to that, you also need to install the respective desktop-specific package for your applet.

OpenVPN

To use this VPN technology, install:

  • NetworkManager-openvpn

  • NetworkManager-openvpn-gnome

OpenConnect

To use this VPN technology, install:

  • NetworkManager-openconnect

  • NetworkManager-openconnect-gnome

PPTP (point-to-point tunneling protocol)

To use this VPN technology, install:

  • NetworkManager-pptp

  • NetworkManager-pptp-gnome

The following procedure describes how to set up your computer as an OpenVPN client using NetworkManager. Setting up other types of VPNs works analogously.

Before you begin, make sure that the package NetworkManager-openvpn-gnome is installed and all dependencies have been resolved.

Procedure 28.4: Setting up OpenVPN with NetworkManager
  1. Open the application Settings by clicking the status icons at the right end of the panel and clicking the wrench and screwdriver icon. In the window All Settings, choose Network.

  2. Click the + icon.

  3. Select VPN and then OpenVPN.

  4. Choose the Authentication type. Depending on the setup of your OpenVPN server, choose Certificates (TLS) or Password with Certificates (TLS).

  5. Insert the necessary values into the respective text boxes. For our example configuration, these are:

    Gateway

    The remote endpoint of the VPN server

    User name

    The user (only available when you have selected Password with Certificates (TLS))

    Password

    The password for the user (only available when you have selected Password with Certificates (TLS))

    User Certificate

    /etc/openvpn/client1.crt

    CA Certificate

    /etc/openvpn/ca.crt

    Private Key

    /etc/openvpn/client1.key

  6. Finish the configuration with Add.

  7. To enable the connection, in the Network panel of the Settings application click the switch button. Alternatively, click the status icons at the right end of the panel, click the name of your VPN and then Connect.

28.4 NetworkManager and security Edit source

NetworkManager distinguishes two types of wireless connections: trusted and untrusted. A trusted connection is any network that you explicitly selected in the past. All others are untrusted. Trusted connections are identified by the name and MAC address of the access point. Using the MAC address ensures that you cannot use a different access point with the name of your trusted connection.

NetworkManager periodically scans for available wireless networks. If multiple trusted networks are found, the most recently used is automatically selected. NetworkManager waits for your selection in case if all networks are untrusted.

If the encryption setting changes but the name and MAC address remain the same, NetworkManager attempts to connect, but first you are asked to confirm the new encryption settings and provide any updates, such as a new key.

If you switch from using a wireless connection to offline mode, NetworkManager blanks the SSID or ESSID. This ensures that the card is disconnected.

28.4.1 User and system connections Edit source

NetworkManager knows two types of connections: user and system connections.

User connections require every user to authenticate in NetworkManager, which stores the user's credentials in their local GNOME keyring so that they do not need to re-enter them every time they connect.

System connections are available to all users automatically. The first user to create the connection enters any necessary credentials, and then all other users have access without needing to know the credentials. The difference in configuring a user or system connection is a single check box, Make available to other users. For information on how to configure user or system connections with NetworkManager, refer to Section 28.3, “Configuring network connections”.

28.4.2 Storing passwords and credentials Edit source

If you do not want to re-enter your credentials each time you want to connect to an encrypted network, you can use the GNOME Keyring Manager to store your credentials encrypted on the disk, secured by a master password.

28.5 Frequently asked questions Edit source

In the following, find some frequently asked questions about configuring special network options with NetworkManager.

Q: 1. How to tie a connection to a specific device?

By default, connections in NetworkManager are device type-specific: they apply to all physical devices with the same type. If more than one physical device per connection type is available (for example, your machine is equipped with two Ethernet cards), you can tie a connection to a certain device.

To do this in GNOME, first look up the MAC address of your device (use the Connection Information available from the applet, or use the output of command line tools like nm-tool or wicked show all). Then start the dialog for configuring network connections and choose the connection you want to modify. On the Wired or Wireless tab, enter the MAC Address of the device and confirm your changes.

Q: 2. How to specify a certain access point in case multiple access points with the same ESSID are detected?

When multiple access points with different wireless bands (a/b/g/n) are available, the access point with the strongest signal is automatically chosen by default. To override this, use the BSSID field when configuring wireless connections.

The Basic Service Set Identifier (BSSID) uniquely identifies each Basic Service Set. In an infrastructure Basic Service Set, the BSSID is the MAC address of the wireless access point. In an independent (ad-hoc) Basic Service Set, the BSSID is a locally administered MAC address generated from a 46-bit random number.

Start the dialog for configuring network connections as described in Section 28.3, “Configuring network connections”. Choose the wireless connection you want to modify and click Edit. On the Wireless tab, enter the BSSID.

Q: 3. How to share network connections with other computers?

The primary device (the device which is connected to the Internet) does not need any special configuration. However, you need to configure the device that is connected to the local hub or machine as follows:

  1. Start the dialog for configuring network connections as described in Section 28.3, “Configuring network connections”. Choose the connection you want to modify and click Edit. Switch to the IPv4 Settings tab and from the Method drop-down box, activate Shared to other computers. That will enable IP traffic forwarding and run a DHCP server on the device. Confirm your changes in NetworkManager.

  2. As the DHCP server uses port 67, make sure that it is not blocked by the firewall: On the machine sharing the connections, start YaST and select Security and Users › Firewall. Switch to the Allowed Services category. If DHCP Server is not already shown as Allowed Service, select DHCP Server from Services to Allow and click Add. Confirm your changes in YaST.

Q: 4. How to provide static DNS information with automatic (DHCP, PPP, VPN) addresses?

In case a DHCP server provides invalid DNS information (and/or routes), you can override it. Start the dialog for configuring network connections as described in Section 28.3, “Configuring network connections”. Choose the connection you want to modify and click Edit. Switch to the IPv4 Settings tab, and from the Method drop-down box, activate Automatic (DHCP) addresses only. Enter the DNS information in the DNS Servers and Search Domains fields. To Ignore automatically obtained routes click Routes and activate the respective check box. Confirm your changes.

Q: 5. How to make NetworkManager connect to password protected networks before a user logs in?

Define a system connection that can be used for such purposes. For more information, refer to Section 28.4.1, “User and system connections”.

28.6 Troubleshooting Edit source

Connection problems can occur. Some common problems related to NetworkManager include the applet not starting or a missing VPN option. Methods for resolving and preventing these problems depend on the tool used.

NetworkManager desktop applet does not start

The applets starts automatically if the network is set up for NetworkManager control. If the applet does not start, check if NetworkManager is enabled in YaST as described in Section 28.2, “Enabling or disabling NetworkManager”. Then make sure that the NetworkManager-gnome package is also installed.

If the desktop applet is installed but is not running, start it manually with the command nm-applet.

NetworkManager applet does not include the VPN option

Support for NetworkManager, applets, and VPN for NetworkManager is distributed in separate packages. If your NetworkManager applet does not include the VPN option, check if the packages with NetworkManager support for your VPN technology are installed. For more information, see Section 28.3.4, “NetworkManager and VPN”.

No network connection available

If you have configured your network connection correctly and all other components for the network connection (router, etc.) are also up and running, it sometimes helps to restart the network interfaces on your computer. To do so, log in to a command line as root and run systemctl restart wickeds.

28.7 More information Edit source

More information about NetworkManager can be found on the following Web sites and directories:

NetworkManager project page

https://gitlab.freedesktop.org/NetworkManager/NetworkManager

Package documentation

Also check out the information in the following directories for the latest information about NetworkManager and the GNOME applet:

  • /usr/share/doc/packages/NetworkManager/,

  • /usr/share/doc/packages/NetworkManager-gnome/.

29 Power management Edit source

Power management is especially important on laptop computers, but is also useful on other systems. ACPI (Advanced Configuration and Power Interface) is available on all modern computers (laptops, desktops and servers). Power management technologies require suitable hardware and BIOS routines. Most laptops and many modern desktops and servers meet these requirements. It is also possible to control CPU frequency scaling to save power or decrease noise.

29.1 Power saving functions Edit source

Power saving functions are not only significant for the mobile use of laptops, but also for desktop systems. The main functions and their use in ACPI are:

Standby

Not supported.

Suspend (to memory)

This mode writes the entire system state to the RAM. Subsequently, the entire system except the RAM is put to sleep. In this state, the computer consumes little power. The advantage of this state is the possibility of resuming work at the same point within a few seconds without having to boot and restart applications. This function corresponds to the ACPI state S3.

Hibernation (suspend to disk)

In this operating mode, the entire system state is written to the hard disk and the system is powered off. There must be a swap partition at least as big as the RAM to write all the active data. Reactivation from this state takes about 30 to 90 seconds. The state before the suspend is restored. Some manufacturers offer useful hybrid variants of this mode, such as RediSafe in IBM Thinkpads. The corresponding ACPI state is S4. In Linux, suspend to disk is performed by kernel routines that are independent from ACPI.

Note
Note: Changed UUID for swap partitions when formatting via mkswap

Do not reformat existing swap partitions with mkswap if possible. Reformatting with mkswap will change the UUID value of the swap partition. Either reformat via YaST (which will update /etc/fstab) or adjust /etc/fstab manually.

Battery monitor

ACPI checks the battery charge status and provides information about it. Additionally, it coordinates actions to perform when a critical charge status is reached.

Automatic power-off

Following a shutdown, the computer is powered off. This is especially important when an automatic shutdown is performed shortly before the battery is empty.

Processor speed control

In connection with the CPU, energy can be saved in three different ways: frequency and voltage scaling (also known as PowerNow! or Speedstep), throttling and putting the processor to sleep (C-states). Depending on the operating mode of the computer, these methods can also be combined.

29.2 Advanced configuration and power interface (ACPI) Edit source

ACPI was designed to enable the operating system to set up and control the individual hardware components. ACPI supersedes both Power Management Plug and Play (PnP) and Advanced Power Management (APM). It delivers information about the battery, AC adapter, temperature, fan and system events, like close lid or battery low.

The BIOS provides tables containing information about the individual components and hardware access methods. The operating system uses this information for tasks like assigning interrupts or activating and deactivating components. Because the operating system executes commands stored into the BIOS, the functionality depends on the BIOS implementation. The tables ACPI can detect and load are reported in journald. See Chapter 11, journalctl: query the systemd journal for more information on viewing the journal log messages. See Section 29.2.2, “Troubleshooting” for more information about troubleshooting ACPI problems.

29.2.1 Controlling the CPU performance Edit source

The CPU can save energy in three ways:

  • Frequency and Voltage Scaling

  • Throttling the Clock Frequency (T-states)

  • Putting the Processor to Sleep (C-states)

Depending on the operating mode of the computer, these methods can be combined. Saving energy also means that the system heats up less and the fans are activated less frequently.

Frequency scaling and throttling are only relevant if the processor is busy, because the most economic C-state is applied anyway when the processor is idle. If the CPU is busy, frequency scaling is the recommended power saving method. Often the processor only works with a partial load. In this case, it can be run with a lower frequency. Dynamic frequency scaling controlled by the kernel on-demand governor is the best approach.

Throttling should be used as the last resort, for example, to extend the battery operation time despite a high system load. However, certain systems do not run smoothly when they are throttled too much. Moreover, CPU throttling does not make sense if the CPU has little to do.

For in-depth information, refer to Book “System Analysis and Tuning Guide”, Chapter 11 “Power management”.

29.2.2 Troubleshooting Edit source

There are two different types of problems. On one hand, the ACPI code of the kernel may contain bugs that were not detected in time. In this case, a solution will be made available for download. More often, the problems are caused by the BIOS. Sometimes, deviations from the ACPI specification are purposely integrated in the BIOS to circumvent errors in the ACPI implementation of other widespread operating systems. Hardware components that have serious errors in the ACPI implementation are recorded in a blacklist that prevents the Linux kernel from using ACPI for these components.

The first thing to do when problems are encountered is to update the BIOS. If the computer does not boot, one of the following boot parameters may be helpful:

pci=noacpi

Do not use ACPI for configuring the PCI devices.

acpi=ht

Only perform a simple resource configuration. Do not use ACPI for other purposes.

acpi=off

Disable ACPI.

Warning
Warning: Problems booting without ACPI

Some newer machines (especially SMP systems and AMD64 systems) need ACPI for configuring the hardware correctly. On these machines, disabling ACPI can cause problems.

Sometimes, the machine is confused by hardware that is attached over USB or FireWire. If a machine refuses to boot, unplug all unneeded hardware and try again.

Monitor the boot messages of the system with the command dmesg -T | grep -2i acpi (or all messages, because the problem may not be caused by ACPI) after booting. If an error occurs while parsing an ACPI table, the most important table—the DSDT (Differentiated System Description Table)—can be replaced with an improved version. In this case, the faulty DSDT of the BIOS is ignored. The procedure is described in Section 29.4, “Troubleshooting”.

In the kernel configuration, there is a switch for activating ACPI debug messages. If a kernel with ACPI debugging is compiled and installed, detailed information is issued.

If you experience BIOS or hardware problems, it is always advisable to contact the manufacturers. Especially if they do not always provide assistance for Linux, they should be confronted with the problems. Manufacturers will only take the issue seriously if they realize that an adequate number of their customers use Linux.

29.2.2.1 More information Edit source

29.3 Rest for the hard disk Edit source

In Linux, the hard disk can be put to sleep entirely if it is not needed or it can be run in a more economic or quieter mode. On modern laptops, you do not need to switch off the hard disks manually, because they automatically enter an economic operating mode whenever they are not needed. However, if you want to maximize power savings, test the following methods, using the hdparm command.

It can be used to modify hard disk settings. The option -y instantly switches the hard disk to the standby mode. -Y puts it to sleep. hdparm -S X causes the hard disk to be spun down after a certain period of inactivity. Replace X as follows: 0 disables this mechanism, causing the hard disk to run continuously. Values from 1 to 240 are multiplied by 5 seconds. Values from 241 to 251 correspond to 1 to 11 times 30 minutes.

Internal power saving options of the hard disk can be controlled with the option -B. Select a value from 0 to 255 for maximum saving to maximum throughput. The result depends on the hard disk used and is difficult to assess. To make a hard disk quieter, use the option -M. Select a value from 128 to 254 for quiet to fast.

Often, it is not so easy to put the hard disk to sleep. In Linux, numerous processes write to the hard disk, waking it up repeatedly. Therefore, it is important to understand how Linux handles data that needs to be written to the hard disk. First, all data is buffered in the RAM. This buffer is monitored by the pdflush daemon. When the data reaches a certain age limit or when the buffer is filled to a certain degree, the buffer content is flushed to the hard disk. The buffer size is dynamic and depends on the size of the memory and the system load. By default, pdflush is set to short intervals to achieve maximum data integrity. It checks the buffer every 5 seconds and writes the data to the hard disk. The following variables are interesting:

/proc/sys/vm/dirty_writeback_centisecs

Contains the delay until a pdflush thread wakes up (in hundredths of a second).

/proc/sys/vm/dirty_expire_centisecs

Defines after which timeframe a dirty page should be written at latest. Default is 3000, which means 30 seconds.

/proc/sys/vm/dirty_background_ratio

Maximum percentage of dirty pages until pdflush begins to write them. Default is 5%.

/proc/sys/vm/dirty_ratio

When the dirty pages exceed this percentage of the total memory, processes are forced to write dirty buffers during their time slice instead of continuing to write.

Warning
Warning: Data integrity risk

Changes to the pdflush daemon settings can compromise data integrity.

Apart from these processes, journaling file systems, like Btrfs, Ext3, Ext4 and others write their metadata independently from pdflush, which also prevents the hard disk from spinning down. To avoid this, a special kernel extension has been developed for mobile devices. To use the extension, install the laptop-mode-tools package and see /usr/src/linux/Documentation/laptops/laptop-mode.txt for details.

Another important factor is the way active programs behave. For example, good editors regularly write hidden backups of the currently modified file to the hard disk, causing the disk to wake up. Features like this can be disabled at the expense of data integrity.

In this connection, the mail daemon postfix uses the variable POSTFIX_LAPTOP. If this variable is set to yes, postfix accesses the hard disk far less frequently.

In openSUSE Leap these technologies are controlled by laptop-mode-tools.

29.4 Troubleshooting Edit source

All error messages and alerts are logged in the system journal, which can be queried with the command journalctl (see Chapter 11, journalctl: query the systemd journal for more information). The following sections cover the most common problems.

29.4.1 CPU frequency does not work Edit source

Refer to the kernel sources to see if your processor is supported. You may need a special kernel module or module option to activate CPU frequency control. If the kernel-source package is installed, this information is available in /usr/src/linux/Documentation/cpu-freq/*.

A An example network Edit source

This example network is used across all network-related chapters of the openSUSE® Leap documentation.

Print this page