Bash is the default system shell. When used as a login shell, it reads several initialization files. Bash processes them in the order they appear in this list:

Make custom settings in ~/.profile or ~/.bashrc. To ensure the correct processing of these files, it is necessary to copy the basic settings from /etc/skel/.profile or /etc/skel/.bashrc into the home directory of the user. It is recommended to copy the settings from /etc/skel after an update. Execute the following shell commands to prevent the loss of personal adjustments:

> mv ~/.bashrc ~/.bashrc.old
> cp /etc/skel/.bashrc ~/.bashrc
> mv ~/.profile ~/.profile.old
> cp /etc/skel/.profile ~/.profile

Then copy personal adjustments back from the *.old files.

Use cron to automatically run commands in the background at predefined times. cron uses specially formatted time tables, and the tool comes with several default ones. Users can also specify custom tables, if needed.

The cron tables are located in /var/spool/cron/tabs. /etc/crontab serves as a systemwide cron table. Enter the user name to run the command directly after the time table and before the command. In Example 15.1, “Entry in /etc/crontab”, root is entered. Package-specific tables, located in /etc/cron.d, have the same format. See the cron man page (man cron).

1-59/5 * * * *   root   test -x /usr/sbin/atrun && /usr/sbin/atrun

You cannot edit /etc/crontab by calling the command crontab -e. This file must be loaded directly into an editor, then modified and saved.

Several packages install shell scripts to the directories /etc/cron.hourly, /etc/cron.daily, /etc/cron.weekly and /etc/cron.monthly, whose execution is controlled by /usr/lib/cron/run-crons. /usr/lib/cron/run-crons is run every 15 minutes from the main table (/etc/crontab). This guarantees that processes that may have been neglected can be run at the proper time.

To run the hourly, daily or other periodic maintenance scripts at custom times, remove the time stamp files regularly using /etc/crontab entries (see Example 15.2, “/etc/crontab: remove time stamp files”, which removes the hourly one before every full hour, the daily one once a day at 2:14 a.m., etc.).

59 *  * * *     root  rm -f /var/spool/cron/lastrun/cron.hourly
14 2  * * *     root  rm -f /var/spool/cron/lastrun/cron.daily
29 2  * * 6     root  rm -f /var/spool/cron/lastrun/cron.weekly
44 2  1 * *     root  rm -f /var/spool/cron/lastrun/cron.monthly

Or you can set DAILY_TIME in /etc/sysconfig/cron to the time at which cron.daily should start. The setting of MAX_NOT_RUN ensures that the daily tasks get triggered to run, even if the user did not turn on the computer at the specified DAILY_TIME for a longer time. The maximum value of MAX_NOT_RUN is 14 days.

To avoid the mail flood caused by cron status messages, the default value of SEND_MAIL_ON_NO_ERROR in /etc/sysconfig/cron is set to "no" for new installations. Even with this setting to "no", cron data output will still be sent to the MAILTO address, as documented in the cron man page.

In the update case it is recommended to set these values according to your needs.

There are several system services (daemons) that, along with the kernel itself, regularly record the system status and specific events onto log files. This way, the administrator can regularly check the status of the system at a certain point in time, recognize errors or faulty functions and troubleshoot them with pinpoint precision. These log files are normally stored in /var/log as specified by FHS and grow on a daily basis. The logrotate package helps control the growth of these files. For more details refer to Book “System Analysis and Tuning Guide”, Chapter 3 “System log files”, Section 3.3 “Managing log files with logrotate”.

locate, a command for quickly finding files, is not included in the standard scope of installed software. If desired, install the package mlocate, the successor of the package findutils-locate. The updatedb process is started automatically every night or about 15 minutes after booting the system.

With the ulimit (user limits) command, it is possible to set limits for the use of system resources and to have these displayed. ulimit is especially useful for limiting available memory for applications. With this, an application can be prevented from co-opting too much of the system resources and slowing or even hanging up the operating system.

ulimit can be used with various options. To limit memory usage, use the options listed in Table 15.1, “ulimit: Setting resources for the user”.

Systemwide default entries are set in /etc/profile. Editing this file directly is not recommended, because changes will be overwritten during system upgrades. To customize systemwide profile settings, use /etc/profile.local. Per-user settings should be made in ~USER/.profile.

# Limits maximum resident set size (physical memory):
ulimit -m 98304

# Limits of virtual memory:
ulimit -v 98304

Memory allocations must be specified in KB. For more detailed information, see man bash.

Important: ulimit support

Not all shells support ulimit directives. PAM (for example, pam_limits) offers comprehensive adjustment possibilities as an alternative to ulimit.

The free command displays the total amount of free and used physical memory and swap space in the system and the buffers and cache consumed by the kernel. The concept of available RAM dates back to before the days of unified memory management. The slogan free memory is bad memory applies well to Linux. As a result, Linux has always made the effort to balance out caches without allowing free or unused memory.

The kernel does not have direct knowledge of any applications or user data. Instead, it manages applications and user data in a page cache. If memory runs short, parts of it are written to the swap partition or to files, from which they can initially be read using the mmap command (see man mmap).

The kernel also contains other caches, such as the slab cache, where the caches used for network access are stored. This may explain the differences between the counters in /proc/meminfo. Most, but not all, of them can be accessed via /proc/slabinfo.

However, if your goal is to find out how much RAM is currently being used, find this information in /proc/meminfo.

For some GNU applications (such as tar), the man pages are no longer maintained. For these commands, use the --help option to get a quick overview of the info pages, which provide more in-depth instructions. Info is GNU's hypertext system. Read an introduction to this system by entering info info. Info pages can be viewed with Emacs by entering emacs -f info or directly in a console with info. You can also use tkinfo, xinfo or the help system to view info pages.

To read a man page enter man MAN_PAGE. If a man page with the same name exists in different sections, they will all be listed with the corresponding section numbers. Select the one to display. If you do not enter a section number within a few seconds, the first man page will be displayed.

To change this to the default system behavior, set MAN_POSIXLY_CORRECT=1 in a shell initialization file such as ~/.bashrc.

GNU Emacs is a complex work environment. The following sections cover the configuration files processed when GNU Emacs is started. More information is available at https://www.gnu.org/software/emacs/.

On start-up, Emacs reads several files containing the settings of the user, system administrator and distributor for customization or preconfiguration. The initialization file ~/.emacs is installed to the home directories of the individual users from /etc/skel. .emacs, in turn, reads the file /etc/skel/.gnu-emacs. To customize the program, copy .gnu-emacs to the home directory (with cp /etc/skel/.gnu-emacs ~/.gnu-emacs) and make the desired settings there.

.gnu-emacs defines the file ~/.gnu-emacs-custom as custom-file. If users make settings with the customize options in Emacs, the settings are saved to ~/.gnu-emacs-custom.

With openSUSE Leap, the emacs package installs the file site-start.el in the directory /usr/share/emacs/site-lisp. The file site-start.el is loaded before the initialization file ~/.emacs. Among other things, site-start.el ensures that special configuration files distributed with Emacs add-on packages, such as psgml, are loaded automatically. Configuration files of this type are located in /usr/share/emacs/site-lisp, too, and always begin with suse-start-. The local system administrator can specify systemwide settings in default.el.

More information about these files is available in the Emacs info file under Init File: info:/emacs/InitFile. Information about how to disable the loading of these files (if necessary) is also provided at this location.

The components of Emacs are divided into several packages:

systemd reads /etc/locale.conf at early boot. The locale settings configured in this file are inherited by every service or user, unless there are individual settings.

Note: Behavior of older configuration files under openSUSE Leap openSUSE Leap

Earlier versions of openSUSE Leap read locale settings from /etc/sysconfig/language, /etc/sysconfig/keyboard, and /etc/sysconfig/console. Starting with openSUSE Leap 15.0, these files are considered obsolete. systemd does not read settings from these files anymore. Instead, systemd reads /etc/locale.conf.

However, variables defined in /etc/sysconfig/language will still be used: They override the system-wide locale and can be used to define different locale settings for user shells (see Section 15.4.2, “Some examples”).

To set the system-wide locale, you can either:

To keep backward compatibility with old systems during the update of the systemd package, all variables mentioned will be migrated from sysconfig to their final destinations if they are not already defined there.

You should always set the language and country codes together. Language settings follow the standard ISO 639 available at https://www.evertype.com/standards/iso639/iso639-en.html and https://www.loc.gov/standards/iso639-2/. Country codes are listed in ISO 3166, see https://en.wikipedia.org/wiki/ISO_3166.

It only makes sense to set values for which usable description files can be found in /usr/lib/locale. Additional description files can be created from the files in /usr/share/i18n using the command localedef. The description files are part of the glibc-i18ndata package. A description file for en_US.UTF-8 (for English and United States) can be created with:

localedef -i en_US -f UTF-8 en_US.UTF-8

Changes to /etc/sysconfig/language are activated by the following process chain:

This ensures that any changes to /etc/sysconfig/language are available at the next login to the respective shell, without having to manually activate them.

Users can override the system defaults by editing their ~/.bashrc accordingly. For example, if you do not want to use the system-wide en_US for program messages, include LC_MESSAGES=es_ES so that messages are displayed in Spanish instead.

If you are not satisfied with locale system defaults, change the settings in ~/.i18n according to the Bash scripting syntax. Entries in ~/.i18n override system defaults from /etc/sysconfig/language. Use the same variable names but without the RC_ namespace prefixes. For example, use LANG instead of RC_LANG:

LANG=cs_CZ.UTF-8
LC_COLLATE=C

Files in the category Messages are, as a rule, only stored in the corresponding language directory (like en) to have a fallback. If you set LANG to en_US and the message file in /usr/share/locale/en_US/LC_MESSAGES does not exist, it falls back to /usr/share/locale/en/LC_MESSAGES.

A fallback chain can also be defined, for example, for Breton to French or for Galician to Spanish to Portuguese:

LANGUAGE="br_FR:fr_FR"

LANGUAGE="gl_ES:es_ES:pt_PT"

If desired, use the Norwegian variants Nynorsk and Bokmål instead (with additional fallback to no):

LANG="nn_NO"

LANGUAGE="nn_NO:nb_NO:no"

or

LANG="nb_NO"

LANGUAGE="nb_NO:nn_NO:no"

In Norwegian, LC_TIME is also treated differently.

One problem that can arise is a separator used to delimit groups of digits not being recognized properly. This occurs if LANG is set to only a two-letter language code like de, but the definition file glibc uses is located in /usr/share/lib/de_DE/LC_NUMERIC. Thus LC_NUMERIC must be set to de_DE to make the separator definition visible to the system.