Jump to contentJump to page navigation: previous page [access key p]/next page [access key n]
openSUSE Leap Documentation › Reference › Services › SLP
ContentsContents
Reference
  1. About This Guide
  2. I Advanced Administration
    1. 1 YaST in Text Mode
    2. 2 Managing Software with Command Line Tools
    3. 3 System Recovery and Snapshot Management with Snapper
    4. 4 Remote Access with VNC
    5. 5 Expert Partitioner
    6. 6 Installing Multiple Kernel Versions
    7. 7 Graphical User Interface
  3. II System
    1. 8 32-Bit and 64-Bit Applications in a 64-Bit System Environment
    2. 9 Introduction to the Boot Process
    3. 10 The systemd Daemon
    4. 11 journalctl: Query the systemd Journal
    5. 12 The Boot Loader GRUB 2
    6. 13 Basic Networking
    7. 14 UEFI (Unified Extensible Firmware Interface)
    8. 15 Special System Features
    9. 16 Dynamic Kernel Device Management with udev
  4. III Services
    1. 17 SLP
    2. 18 Time Synchronization with NTP
    3. 19 The Domain Name System
    4. 20 DHCP
    5. 21 Samba
    6. 22 Sharing File Systems with NFS
    7. 23 On-Demand Mounting with Autofs
    8. 24 The Apache HTTP Server
    9. 25 Setting Up an FTP Server with YaST
    10. 26 The Proxy Server Squid
  5. IV Mobile Computers
    1. 27 Mobile Computing with Linux
    2. 28 Using NetworkManager
    3. 29 Power Management
  6. A An Example Network
  7. B GNU Licenses
Navigation←→
openSUSE Leap Documentation › Reference › Services › SLP
Top
←→
Applies to openSUSE Leap 15.0

17 SLP

Abstract

Configuring a network client requires detailed knowledge about services provided over the network (such as printing or LDAP, for example). To make it easier to configure such services on a network client, the “service location protocol” (SLP) was developed. SLP makes the availability and configuration data of selected services known to all clients in the local network. Applications that support SLP can use this information to be configured automatically.

17.1 The SLP Front-End slptool
17.2 Providing Services via SLP
17.3 For More Information

openSUSE® Leap supports installation using installation sources provided with SLP and contains many system services with integrated support for SLP. You can use SLP to provide networked clients with central functions, such as an installation server, file server, or print server on your system. Services that offer SLP support include cupsd, login, ntp, openldap2, postfix, rpasswd, rsyncd, saned, sshd (via fish), vnc, and ypserv.

All packages necessary to use SLP services on a network client are installed by default. However, if you want to provide services via SLP, check that the openslp-server package is installed.

17.1 The SLP Front-End slptool

slptool is a command line tool to query and register SLP services. The query functions are useful for diagnostic purposes. The most important slptool subcommands are listed below. slptool --help lists all available options and functions.

findsrvtypes

List all service types available on the network. 

tux > slptool findsrvtypes
service:install.suse:nfs
service:install.suse:ftp
service:install.suse:http
service:install.suse:smb
service:ssh
service:fish
service:YaST.installation.suse:vnc
service:smtp
service:domain
service:management-software.IBM:hardware-management-console
service:rsync
service:ntp
service:ypserv
findsrvs SERVICE_TYPE

List all servers providing SERVICE_TYPE 

tux > slptool findsrvs service:ntp
service:ntp://ntp.example.com:123,57810
service:ntp://ntp2.example.com:123,57810
findattrs SERVICE_TYPE//HOST

List attributes for SERVICE_TYPE on HOST 

tux > slptool findattrs service:ntp://ntp.example.com
(owner=tux),(email=tux@example.com)
register SERVICE type//HOST:PORT "(ATTRIBUTE=VALUE),(ATTRIBUTE=VALUE)"

Registers SERVICE_TYPE on HOST with an optional list of attributes 

slptool register service:ntp://ntp.example.com:57810 \
"(owner=tux),(email=tux@example.com)"
deregister SERVICE_TYPE//host

De-registers SERVICE_TYPE on HOST 

slptool deregister service:ntp://ntp.example.com

For more information run slptool --help.

17.2 Providing Services via SLP

To provide SLP services, the SLP daemon (slpd) must be running. Like most system services in openSUSE Leap, slpd is controlled by means of a separate start script. After the installation, the daemon is inactive by default. To activate it for the current session, run sudo systemctl start slpd. If slpd should be activated on system start-up, run sudo systemctl enable slpd.

Many applications in openSUSE Leap have integrated SLP support via the libslp library. If a service has not been compiled with SLP support, use one of the following methods to make it available via SLP:

Static Registration with /etc/slp.reg.d

Create a separate registration file for each new service. The following example registers a scanner service: 

## Register a saned service on this system
## en means english language
## 65535 disables the timeout, so the service registration does
## not need refreshes
service:scanner.sane://$HOSTNAME:6566,en,65535
watch-port-tcp=6566
description=SANE scanner daemon

The most important line in this file is the service URL, which begins with service:. This contains the service type (scanner.sane) and the address under which the service is available on the server. $HOSTNAME is automatically replaced with the full host name. The name of the TCP port on which the relevant service can be found follows, separated by a colon. Then enter the language in which the service should appear and the duration of registration in seconds. These should be separated from the service URL by commas. Set the value for the duration of registration between 0 and 65535. 0 prevents registration. 65535 removes all restrictions.

The registration file also contains the two variables watch-port-tcp and description. watch-port-tcp links the SLP service announcement to whether the relevant service is active by having slpd check the status of the service. The second variable contains a more precise description of the service that is displayed in suitable browsers.

Tip
Tip: YaST and SLP

Some services brokered by YaST, such as an installation server or YOU server, perform this registration automatically when you activate SLP in the module dialogues. YaST then creates registration files for these services.

Static Registration with /etc/slp.reg

The only difference between this method and the procedure with /etc/slp.reg.d is that all services are grouped within a central file.

Dynamic Registration with slptool

If a service needs to be registered dynamically without the need of configuration files, use the slptool command line utility. The same utility can also be used to de-register an existing service offering without restarting slpd. See Section 17.1, “The SLP Front-End slptool” for details.

17.2.1 Setting up an SLP Installation Server

Announcing the installation data via SLP within your network makes the network installation much easier, since the installation data such as IP address of the server or the path to the installation media are automatically required via SLP query.

17.3 For More Information

RFC 2608, 2609, 2610

RFC 2608 generally deals with the definition of SLP. RFC 2609 deals with the syntax of the service URLs used in greater detail and RFC 2610 deals with DHCP via SLP.

http://www.openslp.org

The home page of the OpenSLP project.

/usr/share/doc/packages/openslp

This directory contains the documentation for SLP coming with the openslp-server package, including a README.SUSE containing the openSUSE Leap details, the RFCs, and two introductory HTML documents. Programmers who want to use the SLP functions will find more information in the Programmers Guide that is included in the openslp-devel package.

→Chapter 18 Time Synchronization with NTP←Part III Services
Print this page

© 2018 SUSE