openSUSE Leap Documentation › System Analysis and Tuning Guide › Resource Management › General System Resource Management
ContentsContents
System Analysis and Tuning Guide
  1. About This Guide
  2. I Basics
    1. 1 General Notes on System Tuning
  3. II System Monitoring
    1. 2 System Monitoring Utilities
    2. 3 Analyzing and Managing System Log Files
  4. III Kernel Monitoring
    1. 4 SystemTap—Filtering and Analyzing System Data
    2. 5 Kernel Probes
    3. 6 Hardware-Based Performance Monitoring with Perf
    4. 7 OProfile—System-Wide Profiler
  5. IV Resource Management
    1. 8 General System Resource Management
    2. 9 Kernel Control Groups
    3. 10 Automatic Non-Uniform Memory Access (NUMA) Balancing
    4. 11 Power Management
  6. V Kernel Tuning
    1. 12 Tuning I/O Performance
    2. 13 Tuning the Task Scheduler
    3. 14 Tuning the Memory Management Subsystem
    4. 15 Tuning the Network
  7. VI Handling System Dumps
    1. 16 Tracing Tools
    2. 17 Kexec and Kdump
  8. VII Synchronized Clocks with Precision Time Protocol
    1. 18 Precision Time Protocol
  9. A GNU Licenses
Navigation←→
openSUSE Leap Documentation › System Analysis and Tuning Guide › Resource Management › General System Resource Management
Top
←→
Applies to openSUSE Leap 42.1

8 General System Resource Management

Abstract

Tuning the system is not only about optimizing the kernel or getting the most out of your application, it begins with setting up a lean and fast system. The way you set up your partitions and file systems can influence the server's speed. The number of active services and the way routine tasks are scheduled also affects performance.

8.1 Planning the Installation
8.2 Disabling Unnecessary Services
8.3 File Systems and Disk Access

8.1 Planning the Installation

A carefully planned installation ensures that the system is set up exactly as you need it for the given purpose. It also saves considerable time when fine tuning the system. All changes suggested in this section can be made in the Installation Settings step during the installation. See Book “Start-Up”, Chapter 2 “Installation with YaST”, Section 2.14 “Installation Settings” for details.

8.1.1 Partitioning

Depending on the server's range of applications and the hardware layout, the partitioning scheme can influence the machine's performance (although to a lesser extent only). It is beyond the scope of this manual to suggest different partitioning schemes for particular workloads. However, the following rules will positively affect performance. They do not apply when using an external storage system.

  • Make sure there always is some free space available on the disk, since a full disk delivers inferior performance

  • Disperse simultaneous read and write access onto different disks by, for example:

    • using separate disks for the operating system, data, and log files

    • placing a mail server's spool directory on a separate disk

    • distributing the user directories of a home server between different disks

8.1.2 Installation Scope

The installation scope has no direct influence on the machine's performance, but a carefully chosen scope of packages has advantages. It is recommended to install the minimum of packages needed to run the server. A system with a minimum set of packages is easier to maintain and has fewer potential security issues. Furthermore, a tailor made installation scope also ensures that no unnecessary services are started by default.

openSUSE Leap lets you customize the installation scope on the Installation Summary screen. By default, you can select or remove preconfigured patterns for specific tasks, but it is also possible to start the YaST Software Manager for a fine-grained package-based selection.

One or more of the following default patterns may not be needed in all cases:

GNOME Desktop Environment

Servers rarely need a full desktop environment. In case a graphical environment is needed, a more economical solution such as IceWM can be sufficient.

X Window System

When solely administrating the server and its applications via command line, consider not installing this pattern. However, keep in mind that it is needed to run GUI applications from a remote machine. If your application is managed by a GUI or if you prefer the GUI version of YaST, keep this pattern.

Print Server

This pattern is only needed if you want to print from the machine.

8.1.3 Default Target

A running X Window System consumes many resources and is rarely needed on a server. It is strongly recommended to start the system in target multi-user.target. You will still be able to remotely start graphical applications.

8.2 Disabling Unnecessary Services

The default installation starts several services (the number varies with the installation scope). Since each service consumes resources, it is recommended to disable the ones not needed. Run YaST › System › Services Manager to start the services management module.

If you are using the graphical version of YaST, you can click the column headlines to sort the list of services. Use this to get an overview of which services are currently running. Use the Start/Stop button to disable the service for the running session. To permanently disable it, use the Enable/Disable button.

The following list shows services that are started by default after the installation of openSUSE Leap. Check which of the components you need, and disable the others:

alsasound

Loads the Advanced Linux Sound System.

auditd

A daemon for the Audit system (see Book “Security Guide” for details). Disable this if you do not use Audit.

bluez-coldplug

Handles cold plugging of Bluetooth dongles.

cups

A printer daemon.

java.binfmt_misc

Enables the execution of *.class or *.jar Java programs.

nfs

Services needed to mount NFS.

smbfs

Services needed to mount SMB/CIFS file systems from a Windows* server.

splash / splash_early

Shows the splash screen on start-up.

8.3 File Systems and Disk Access

Hard disks are the slowest components in a computer system and therefore often the cause for a bottleneck. Using the file system that best suits your workload helps to improve performance. Using special mount options or prioritizing a process's I/O priority are further means to speed up the system.

8.3.1 File Systems

openSUSE Leap ships with several different file systems, including BrtFS, Ext3, Ext2, ReiserFS, and XFS. Each file system has its own advantages and disadvantages.

8.3.1.1 NFS

NFS (Version 3) tuning is covered in detail in the NFS Howto at http://nfs.sourceforge.net/nfs-howto/. The first thing to experiment with when mounting NFS shares is increasing the read write blocksize to 32768 by using the mount options wsize and rsize.

8.3.2 Disabling Access Time (atime) Updates

Whenever a file is read on a Linux file system, its access time (atime) is updated. As a result, each read-only file access in fact causes a write operation. On a journaling file system two write operations are triggered since the journal will be updated, too. It is recommended to turn this feature off when you do not need to keep track of access times. This can be true for file and Web servers or for network storage.

To turn off access time updates, mount the file system with the noatime option. To do so, either edit /etc/fstab directly, or use the Fstab Options dialog when editing or adding a partition with the YaST Partitioner.

8.3.3 Prioritizing Disk Access with ionice

The ionice command lets you prioritize disk access for single processes. This enables you to give less I/O priority to background processes with heavy disk access that are not time-critical, such as backup jobs. ionice also lets you raise the I/O priority for a specific process to make sure this process always has immediate access to the disk. You can set the following three scheduling classes:

Idle

A process from the idle scheduling class is only granted disk access when no other process has asked for disk I/O.

Best effort

The default scheduling class used for any process that has not asked for a specific I/O priority. Priority within this class can be adjusted to a level from 0 to 7 (with 0 being the highest priority). Programs running at the same best-effort priority are served in a round-robin fashion. Some kernel versions treat priority within the best-effort class differently—for details, refer to the ionice(1) man page.

Real-time

Processes in this class are always granted disk access first. Fine-tune the priority level from 0 to 7 (with 0 being the highest priority). Use with care, since it can starve other processes.

For more details and the exact command syntax refer to the ionice(1) man page.

→Chapter 9 Kernel Control Groups←Part IV Resource Management
Print this page

© 2018 SUSE